How do you set up voice over ip infrastructure

I currently have 2 Cisco 3745 routers. I know I need a call manager and a gateway. Is there a module I can use for the 3745 to make it one or do I need to use a VG200 or VG248. What I want to do is allow an ip phone at a remote site to call a regular phone in the states. The Wan links are no issue. How do I have the IP phones talk to the existing infrastructue? Thanks

You can use either analo gor digital modules in the 3745 to interface with the PSTN or PBX infrastructure. You can get an NM-HDV Module if you need a PRI or a Voice T1, or NM-HDA/NM-2V modules for analog lines.
You can also look at the ITS solution depending on the size of your phone deployment, which would allow the router to be the call manager itself. If your phone deployments is rather large, then you would need a call manager server.
Taimoor

Similar Messages

  • How do you folks handle Voice Over in Cinal Cut Pro 2

    I am about to commence on documentary project that will entail extensive amounts of voice over. I do have and use Logic Studio 8, but am not anticipating having to use logic for this purpose. I would much rather do it all in FCP2. This will be at least one hour long format (not a .30 second commercial).
    Thanks in advance.

    For those of us who can't afford the professional narrator et al, but still don't like the computer noise that creeps in with the voice over tool, I use a different method.
    If I have someone coming in to do narration, I turn all the equipment in the room off, unplug the phones, etc. and wire them with a Samson UHF wireless lav. I hook the receiver to my old Sony TRV-900, and have them record the audio track to miniDV tape.
    It's easy to import into FCP, the quality is pretty good, and nice and dry if I want to add effects later; and, I have a backup copy on tape in case of emergencies.

  • How do you do a voice over in imovie

    trying to dub in a brief audio message not following the right steps.
    Can anyone help a newbie?

    http://www.kenstone.net/fcp_homepage/imovie_09_stone.html#voiceovers
    This is a pretty good tutorial with some screenshots that might help you get started.

  • How do you set the number of rows in a spreadsheet, so that even when you drag data in, in writes over those rows instead of adding a new row?

    How do you set the number of rows you want in a spreadsheet, so that even when you drag data in, in writes over those rows instead of adding a new row?

    After the discovery reported above, I filed this report :
    Bug ID# 10073038
    Summary:
    When Numbers is used on a system with decimal comma a csv file may be good AND wrong
    Steps to Reproduce:
    With Numbers v2, you introduced an interesting enhancement.
    In system using the comma as decimal separator, Numbers requires csv files using the semi-colon as values delimiter.
    In fact it’s true if we OPEN the document dragging its icon on Numbers one or thru the open dialog.
    This said.
    (1) Drag and drop a csv built with the 'semi-colon' standard on a table or on a sheet
    (2) Drag and drop a csv built with the 'comma' standard on a table or on a sheet
    Expected Results:
    Every normally constituted user assume that in
    case (1) he will get a perfectly built table
    case (2) he will get every cells of a row in a single cell
    Actual Results:
    In fact you forgot the drag and drop way of use and in
    case (1) every values separated by semi-colon are inserted in a single cell
    case (2) values separated by comma are correctly spread in a table
    isn’t it ridiculous ?
    Regression:
    Except looking in  QuickView to see which is exactly the structure of the file to decide the way we will insert it in a Numbers document, we may use an applescript fair enough to replace the semi-colons by TAB characters
    or
    to replace the commas by TABs and the decimal periods by commas
    Notes:
    While I am on this subject, I wish to make two proposals:
    (1)  It would be fine to format the date according to the ISO format year-mm-dd when you export a Numbers doc to csv.
    Doing that, dates would be imported correctly in every countries.
    At this time, on an English system, you export as mm/dd/year.
    If the doc is open on a system using the format dd/mm/year, the results will be odd.
    On a system using the format dd/mm/year, you export this way and so, if the doc is open on a system using the format mm/dd/year the results are odd too.
    As every localized versions accept the ISO format (at least on entry), using it in the export scheme would give a correct behavior everywhere.
    (2) It would be fine to add the format Tab Separated Values in the Export pane.
    TSV + ISO date format would give documents opening flawlessly everywhere.
    Yvan KOENIG (VALLAURIS, France) dimanche 4 septembre 2011 21:27:41
    iMac 21”5, i7, 2.8 GHz, 4 Gbytes, 1 Tbytes, mac OS X 10.6.8 and 10.7.0
    My iDisk is : <http://public.me.com/koenigyvan>
    Please : Search for questions similar to your own before submitting them to the community

  • How do you get the voice to come off your phone? for example it tells you that the phone is on, what app you used , etc...

    how do you get the voice to turn off when you turn on your iphone it tells you everything from "slide to unlock, messages, etc..."

    tripple click the home button and then turn voice over off... you can also access this from setting>general>accessibility right under vision

  • How do I get a voice over from garage band into Final cut x?

    How do I get a voice over from garage band into Final cut x?  Sorry if this is a newbie question.  I have been editing in final Cut express on my MacBook Pro and just jumped to a new iMac and Final Cut ProX.  Trying to record my own voice on a Yeti mic and import it as narration for a video.  Thought I could simply import media but X has it greyed out.

    Sharing with iTunes is OK, but it is likely to produce a file in MP3 or AAC, which can cause problems. You can create an AIFF version of an MP3 file in iTunes and use that.
    To create an AIFF version, go to iTunes/Preferences and click the General Tab. Click the Import Settings button. Choose Import Using: AIFF Encoder. Then choose your track, and click FILE/CREATE AIFF Version. Use this in FCPX. Be sure to go back into iTunes Preferences and set the import options back to where you had it, so the next time you rip an CD it does not make an AIFF.

  • How do you set up Port Forwarding for ARD 2.2 in AEB N?

    Help,
    I'm a novice at Apple Remote Desktop (ARD) - not an IT guy, so it has to be pretty basic and detailed.
    How do you set up Port Forwarding for ARD 2.2 on the Apple Airport Extreme BS router, 802.11 N. I have one at each end of the internet connection. At one end I have an Airport Extreme N router with 2 macs and eventually 1 windows XP machine (if I can) that I would like to be able to connect to over the interenet (the clients) and at the other end, I have a Mac with ARD 2.2 installed also with an Airport Extreme N router. Note: Both routers use Static IP addresses and all computers use static IP's internally not through DHCP. What are the settings or directions to do this.
    I have read and printed out the directions for Configuration of ARD 3.0 that are posted many times in the ARD discusion group, but it uses a Linksys router ( http://www.starkpr.com/ard.htm posted by Dave Sawyer). The Mac router is different, particularly with the place to set a Private IP address. I'm not sure about alot of things, but especially about the Private IP address, what number do I set it to, the one that is in my Network connections list? It automatically changes to a different number in AE N setup for Port Forwarding (by one) as if it is not suppose to the same?????
    Are there any directions available that are as straight forward for the Airport Extreme N router, as the one's that are listed here for the Linksys Router's? ( http://www.starkpr.com/ard.htm )
    Any and All help will be greatly appreciated.
    P.S. I know I should have 3.0 but bought 2.2 just weeks before 3.0 came out and they would not give me an upgrade price, so I'm waiting for 4.0 to upgrade.
    Thanks,
    Jim

    Try the following for each AirPort Extreme ...
    AEBSn - Port Mapping Setup
    To setup port mapping on an 802.11n AirPort Extreme Base Station (AEBSn), either connect to the AEBSn's wireless network or temporarily connect directly, using an Ethernet cable, to one of the LAN port of the AEBSn, and then use the AirPort Utility, in Manual Setup, to make these settings:
    1. Reserve a DHCP-provided IP address for the host device.
    Internet > DHCP tab
    o On the DHCP tab, click the "+" (Add) button to enter DHCP Reservations.
    o Description: <enter the desired description of the host device>
    o Reserve address by: MAC Address
    o Click Continue.
    o MAC Address: <enter the MAC (what Apple calls Ethernet ID if you are using wired or AirPort ID if wireless) hardware address of the host computer>
    o IPv4 Address: <enter the desired IP address>
    o Click Done.
    2. Setup Port Mapping on the AEBSn.
    Advanced > Port Mapping tab
    o Click the "+" (Add) button
    o Service: <choose the appropriate service from the Service pop-up menu>
    o Public UDP Port(s): 3283
    o Public TCP Port(s): 3283
    o Private IP Address: <enter the IP address of the host server>
    o Private UDP Port(s): 3283
    o Private TCP Port(s): 3283
    o Click "Continue"
    o Click the "+" (Add) button
    o Service: <choose the appropriate service from the Service pop-up menu>
    o Public UDP Port(s):
    o Public TCP Port(s): 5900
    o Private IP Address: <enter the IP address of the host server>
    o Private UDP Port(s):
    o Private TCP Port(s): 5900
    o Click "Continue"
    o Click the "+" (Add) button
    o Service: <choose the appropriate service from the Service pop-up menu>
    o Public UDP Port(s):
    o Public TCP Port(s): 5988
    o Private IP Address: <enter the IP address of the host server>
    o Private UDP Port(s):
    o Private TCP Port(s): 5988
    o Click "Continue"
    (ref: "Well Known" TCP and UDP ports used by Apple software products)

  • How do you add a voice tag to a contact

    how do you add a voice tag to a contact i phone5

    You don't need to add any sort of tags to call by voice. It's built into the system. Go to Settings>General>Siri and make sure it's set to On.
    To use Siri, press and hold the Home button. When the microphone icon pops up and there is a beep, say, "Call <name from your contacts>"
    Consult the manual for more information on Siri.

  • HT201320 how so you set up email that is not hotmail, gmail, etc..?? every time i try to add an account, it doesnt work

    How do you set up email on iphones that are not icloud, exchange, gmail, yahoo,aol, or hotmail?

    I'm thinking you sync to your computer over Wi-Fi, if correct, switch to sync when connected to iTunes, turn off sync over Wi-Fi. Hope this helps, Good luck. Cheers.

  • CS6 How do you set form font

    We have a diary type form that needs to be in Helvetica
    Just tried to set up in CS6 and can't see where to set the font - text boxes default to times
    How do you set the font in Indesign's new PDF form creation tool text boxes?
    tia

    For me, the first answer here gave the most important element of information.
    When Bob said "Does it occur to you that perhaps they just didn’t have time to get all of this in?"... Well yes, it sure did occur to me! And my reply to this would be: "What if they had taken a little more time and made sure they'd managed to have a function that is a little more complete before releasing the newer version?".
    This has been my main issue with any company that releases products on an (almost) yearly basis: OBVIOUSLY they won't have time to complete everything!
    Maybe, I'm only saying maybe, Adobe could have waited a liiiiitle bit longer and provided a finished product. Now of course, people will always have a new feature in mind, or a genius idea that they'd like to see happen in a program.
    I also know that the high management would have been pushing for everything to be ready "on time", but then if you know you won't finish it, leave it out!
    I was also very much looking forward to the new feature in InDesign as I have to make multiple copies of the same form translated into various languages.
    And I had the very same problem as jahallaa, but with our French versions of these PDF forms.
    So, yes, having the option to create the form in InDesign is a great for most of it. Fortunately, the font choice for our forms isn't all that important for me, in this specific case, so it wouldn't matter which font is used IF only it would understand accentuated letters properly.
    Also, reading several times that "the Acrobat team didn't provide all the codes to the InDesign team" leaves me a little perplexed... If they are not going to get a complete code, then maybe, once more, they should wait until they get the complete thing. Now, of course, I don't know why the code would be provide incomplete, whether it's competition between the teams, security or plain weirdness but still... If you're going to implement a feature, make sure it fills in the major bullet points! If it doesn't, well give the marketing a rest and wait for the next release!
    Now after saying all this... When our files are translated, they have to be converted into an IDML file to be compatible with our translation tool. I then have to reimport them into InDesign to finalise them, once translated.
    Come to think of it, I'm pretty sure they will lose the forms function in the process, seen that this function didn't exist in CS 5 or 5.5 and that the IDML file loses any function that is not downcompatible.
    Dammit!! I'll now have to fiddle around with 2 files and import layers and such...
    Ah well... Sorry, rant's over!
    Little Red Frog

  • HT3475 When setting up Voice over an unknown error occured (1703)? What is wrong?

    When setting up Voice over an unknown error occured (1703)? What is wrong? This happens to me on my shuffle and Nano, how can I fix it?

    Sounds like the VoiceOver dll wasn't installed properly or is missing.  Try installing the latest version of iTunes over your existing installation on your Mac.
    http://www.apple.com/itunes/download/
    B-rock

  • How Do You Set Mail To 'Manual' ?

    Never had problem with iPhone until yesterday. I am not receiving 'push' e-mail anymore. I did not do any changes to the iPhone at all. Any e-mail now I have to go to inbox and click on the curved arrow symbol at bottom left of page in order to load the waiting e-mails. In a different posting someone mentioned to test 'push' function by setting e-mail to 'manual' and then sending your Yahoo account an e-mail from your computer (I assume using a different e-mail service). In the 'settings' menu for 'mail' I do not see where you set for 'manual'. How do you set mail to 'manual' setting? And do you think I should just RESET the iPhone (using the iPhone or hooking it up to iTunes on the computer to RESET) ?

    I have no other e-mail accounts set up. Anyway I did RESET my iPhone (using the RESET button on the iPhone) and all is well again (how long I do not know). My e-mails are being 'pushed' again so that I can see from the main menu the little red dots (with the numerals inside) showing how many e-mails are waiting for me. I love this feature. I had 'push' e-mail on my ex-Blackberry. BUT, I do not see the AUTO-CHECK anywhere. I am heading over to the Apple Techies at my local Apple store to ask them about this missing AUTO-CHECK. I have a feeling you need two account set up on your iPhone for this feature to appear. I could be wrong. Thanks, everybody........

  • How do I use the time capsule to share itunes music between multiple apple devices? Also, is it possible to control the music on one device using another, and how do you set this up?

    How do I use the time capsule to share itunes music between multiple apple devices? Also, is it possible to control the music on one device using another, and how do you set this up?

    unless i'm missing something, i think you got mixed up, this is easy google for walk throughs
    i'm assuming this is the new 3tb tc AC or 'tower' shape, if so, its wifi will run circles around your at&t device
    unplug the at&t box for a minute and plug it back in
    factory reset your tc - unplug it, hold down reset and keep holding while you plug it back in - only release reset when amber light flashes in 10-20s
    connect the tc to your at&t box via eth in the wan port, wait 1 minute, open airport utility look in 'other wifi devices' to setup the tc
    create a new wifi network (give it a different name than your at&t one) and put the tc in bridge mode (it may do this automatically for you, but you should double check) under the 'network' tab
    login to your at&t router and disable wifi on it
    add new clients to the new wifi network, and point your Macs to the time machine for backups

  • How do you set up multiple accounts in itunes so phones don't automatically sync each others data ?

    How do you set up multiple itunes accounts to prevent multiple phones from sharing contact data?

    To add to Rod's answer, I have been blogging to explain more in detail the work flows for Question and Score slides, and some tweaking possibilities in these articles:
    http://lilybiri.posterous.com/question-question-slides-in-captivate
    http://lilybiri.posterous.com/question-question-slides-part-2
    Lilybiri

  • How do you Set up a Family Pack sub-account

    how do you Set up a Family Pack sub-account i have purchased a Family Pack account and enter the activation key and i can not find where to set up the sub-account.
    please help
    Denis

    Thanks Shepart
    when i activated the account i ticked the upgrade button, should i have ticked the new account button?
    anyway, when i do what you say (below) there is not a manage "Accounts button" so i went to reactive it again ( for a new account) and is says that the activation key is all ready in use.
    Denis, go to www.mac.com and sign into your account. Click on the word "Account" at the top of the left hand column. You will need to sign in again for security purposes. Once your account settings show up, click on the "Manage Accounts" button and you can take care of everything.
    i think i hit a brick wall !!
    Cheers
    Denis

Maybe you are looking for