How do you test for end of page

I have created a report and would want to find a way of checking if it's almost end of page so that if there are more records to be displayed, the report should display the column headings and new data on a new page instead of displaying part of the data or only headings on the previous page and continue onto the next page.
The report displays a student's results for each course done. For example, Course 1 and the column headings(year, module, grade) and the actual data (results) then Course 2 and the column headings and data. If it is near end of page after Course 1 results have been displayed, I would like report to display Course 2 results on the next page.
How do I check in the report if it's end of page or near end of page? Please assist.

Hi,
take a look to the following How To support notes that can give you some ideas.
Reference
How to reset page number for each master without counting master page (Doc ID 75096.1)
How to create a 'continue on page...' message on reports with more than one page (Doc ID 120942.1)
Regards, RZ

Similar Messages

OpenScript: How do you test for object/text existance programmatically?

Hi, All;
I hope someone can help me; kind of new to OATS. I can’t figure out how to test for object/text existence and return results back to the script. There are methods for verifying text and objects; i.e.
Web.verifyText
Web.assertText
These methods just report pass or fail to the test. I need to get the data back programmatically so I can use it logically. I know you can do this pretty easily in Selenium and QTP so there must be a way in OATS.
Thanks,
Eric

Hi Eric,
You can use the Object Explorer to find the xpath of the object you are interested and check for its existence, and then grab some attribute of that object for use elsewhere.
if (web.element(6,"/web:window[@index='0' or @title='Software and Services - SCL']/web:document[@index='0']/web:span[@text='Services' or @index='14']")
.exists()){
System.out.println("OBJECT EXISTS");
// get an attribute of object here ,e.g
String myval = web.element(41,"/web:window[@index='0' or @title='Software and Services - SCL']/web:document[@index='0']/web::span[@text='Services' or @index='14'].getAttribute("innerText");
// use myval elsewhere
Hope it helps.
Jamie

How do you copy, for example I work with blue prints and I want to copy a section and copy into another new page?

How do you copy, for example I work with blue prints and I want to copy a section and copy into another new page?

Forgot to add that it would be an adjustment layer with some kind of mask on it already. The mask is uncentered when copy and pasted which throws it off.
I guess the same question would go towards doing the same for an object. How to copy and paste it over to a new doc, keeping its position within the document? is this possible?

How Do You Test a Flash Drive for Errors Using OS X?

HI. In Windows there are Flash Drive tester that tests if there's something wrong with the Flash drive's chips. How do you test a flash drive for errors on OS X? I bought the HP v220w which is tiny for a 16GB and it's metal. The whole thing goes into the plug. Design wise, it is great, it's very elegant like a jewelry. Thanks in advance.
Gbu.

Format it for OS X and run a surface scan on the partition. That should show any hardware problems that don't keep it from working altogether.

In LiveCycle Designer ES4 how do you remove tabs within a page once they have been created?

In LiveCycle Designer ES4 how do you remove tabs within a page once they have been created?

Emma,
Take a look at the troubleshooting tips on this page from the Infosemantics website:
http://www.infosemantics.com.au/adobe-captivate-widgets/drag-and-drop/troubleshooting-widg et-issues
Pay particular attention to the section entitled: "My drag and drop question works correctly sometimes, but not other times. "
From the appearance of your slide, it looks like you may have removed some of the components from the quiz slide that are necessary for it to function correctly. Try the test that this section of the troubleshooting suggests so that you can see if this is the case. If it turns out that you have deleted some items, you'll need to recreate your quiz slide to get them back again.
Hope this helps.

How do you fax more than one page at a time?

How do you fax more than one page using the phone?

Hello @spirittoo,
I am not quite sure what you mean.
Are you using a third party app to send faxes from a cell phone?
In case you are having an actual fax issue, I have included the following links.
Send a Fax from the Scanner Glass or the Automatic Document Feeder
Fax Sending Fails Intermittently or Fails for Only One Recipient
Aardvark1
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!

How do you test your new laptops?

To the gurus or people who have researched this question: How do you test your new laptops?
When you get a new laptop, what do you do to test it?
My X1Carbon might arrive in a couple weeks, and reading about all the failures and DOAs is scary. So assuming mine is not simply DOA, how do you shake out the less obvious or more obscure problems?
I did search for this info before posting. One other person asked the question,
>> Would appreciate advice re optimal set-up and what testing/diagnostics to do to determine if ther...
but no one answered.

With testing I start with the basics and work my way to the harder stuff.
Inspect the external condition of the machine.
Boot and enter the BIOS before Windows. Review settings then power off.
Boot from Acronis True Image Home backup/recovery DVD and clone HDD or SSD and thus the factory image before it's ever booted to Windows.
Boot to Windows and look carefully at the Lenovo factory image and try to get an understanding for the Lenovo software and why it is there. This does not include the other software from Microsoft, Google, etc.
Create Lenovo Factory Image DVD set with Rescue and Recovery. Throw disk set in the box or put on the shelf in case the machine is ever re-sold.
Test all of the ports - I test every port on the machine for my expected usage. For instance, in the case of the X1 Carbon I would confirm the mini DisplayPort connection works correctly with an external LCD panel. If the machine had a IEEE firewire port or something, test that. Test the USB 3.0 ports with a known working external external enclosure and verify transfer speeds.
Test the SSD speed with CrystalDiskMark, ATTO and AS Disk Benchmark software to get a good overview of the performance.
Install HWiNFO and look carefully at the components. Observe turbo boosting, thermals and fan RPM over the course of a few days for battery and AC power.
Do at least one full battery discharge and recharge. Observe the cycle and details are being properly displayed and recorded in Lenovo Power Manager.
Download all software and drivers from support.lenovo.com for the model being tested. Confirm visually you have all the core components needed. Core includes the drivers, power management driver, Power Manager, hotkeys, etc.
Flatten the machine and install Windows or Linux from scratch. Install drivers and software.
Re-test ports and confirm the machine is working properly.
Benchmark the SSD again. Confirm no change.
Install HWiNFO and confirm turbo, thermals and fan speeds are still proper.
Install core applications and test them. There may be core features in Windows that also need to be installed and tested. For instance, Windows 8 Hyper-V for virtualization.
Connect any external devices you expect to use and test them. For instance, video cameras, smartphones, mp3 players, digital cameras, printers, USB docks, etc.
Do several battery tests with your typical applications and behavior. The goal here is to simulate how the machine will be used in your day-to-day setting or travel scenarios. I usually do at least three tests. This can be rather time consuming with long battery life machines so I get a lot of other testing out of the way first.
By the time you get to this point, if you haven't hit any major roadblocks you'll start to have a good feel for the machine, and if it is going to be a keeper or not. The assumption here is that during this timeframe you have been observing the screen, keyboard, and trackpad performance to see if it's to your liking. The other assumption is that you are using the machine and applications in the scenarios you are purchasing it for.
I don't run synthetic benchmarks. I prefer to test a machine against the scenarios I expect to use it with. I spend most of the first week making this assessment. If any major hardware defects are present, the machine is automatically returned. I do not repair machines just received. No exceptions.
Week 2 is for ironing out any minor issues and assessing if the machine meets the requirements for the scenarios it will support. If it does, it is kept. If it does not, it is returned. This week includes subjective and objective input. You have to weigh the pros and cons for a machine against your priorities. It is rare that a machine is perfect so you have to decide the ROI for the machine. Service and Support must be considered so week two might include a call to support for any unresolved issues. Don't discount the service you receive during this period.
After week two, you are likely right on top of the last day to return a Lenovo machine. The return period is 21 days from the invoice date (I believe), not the day the machine is received so make sure you are well aware of it. After 21 days, the machine is yours for good unless you sell it. Decision time.
Good luck.

How can I test for the bas unit enterd in a control?

How can I to create a polymorphic vi where the user can enter either volume or temperature.
how can Labwiev test for the base unit entered
pseudocode example:
input X
if X.base_unit == m^3 do .......
thanks for any suggestion to resolve or avoid my problem
Solved!
Go to Solution.

Hi schaerm,
you have to dig deeper.
An idea is this one:
The red marked word is containing the unit - in a coded way. Somewhere in the LV help you can find the description of this coding (I remember a chapter on memory representations of all LV datatypes...). (There surely is an easier or better way - but the example is done quic&dirty.)
You can also format the number into a string and analyze the unit here...
Message Edited by GerdW on 02-07-2010 07:21 PM
Best regards,
GerdW
CLAD, using 2009SP1 + LV2011SP1 + LV2014SP1 on WinXP+Win7+cRIO
Kudos are welcome

How do you test an Alert?

How do you test an Alert?

Hi,
Please find the folloing links, which will you some extent.
Triggering Alerts
http://help.sap.com/saphelp_nw04/helpdata/en/49/cbfb40f17af66fe10000000a1550b0/frameset.htm
Setting up alerts
Setting up alerts in RZ20
Alert Management
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/e04141e8-0f11-2a10-adaa-9d97b062c2df
Alert Notification
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/90f449a8-a6db-2910-a386-d2b5999f5751
Custom Alerts in CIC Win Client for CRM 5.0
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/601db2b2-2839-2a10-0381-8807979f6ff8
Understanding u'r SAP EarlyWatch Alert Report
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/4b88cb90-0201-0010-5bb1-a65272a329bf
regards
mahesh.

How do you test any SAP objects before a transport to the production server

How do you test any SAP objects before a transport to the production server?

Hi Rama Krishna,
The actual process is develop the object in development system and unit test there with the available data.
Then move it to Quality server where the data will be the actual replica of production and where the integration testing and ened to end testing happens and also the user acceptance testing happens there.
and once everything is found fine there then it is moved to production system.
Award points if this is helpful.
Regards,
Ravi G

How do You Test EMail Connectivity?

How do You Test EMail Connectivity?
Once you setup the mail gateway with an IP address, port, and domain name. How can you test email connectivity? How do you force the MARS Appliance to send an email?

There is no "test e-mail connectivity" button/function. Essentially you need to configure inspection rules to notify you when they are fired by mars.
You will need to setup a user (preferably a non-admin account for testing) under "Management"-"user management"(if you haven't already done so) make sure to supply e-mail address.
http://www.cisco.com/en/US/docs/security/security_management/cs-mars/6.0/initial/configuration/setup.html#wp1030836
Now you can "Configure a Rule to Send an Alert Action." the following link explains how to do this...An easy one would be the "System Rule: CS-MARS Login Failures - Non-Admin User" rule. Follow the instructions in the link below under the "Configure a Rule to Send an Alert Action" section to modify the rule mentioned above. Keep in mind that this rule only fires when there are login failures. Once you have modified this rule try logging into mars using the non-admin user with a bad password...you should get a e-mail from MARS.
http://www.cisco.com/en/US/docs/security/security_management/cs-mars/6.0/user/guide/combo/alerts.html#wp1056101
Hope this helps.
Dustin Suko

How do you test your Java Pricing UserExits in eclipse?

How do you test your Java Pricing UserExits in eclipse?

do you have to deploy the java class on vmc server to debug it
Yes
- So, the classes have to be compiled error free and uploaded to VMC.
- VMC has to be restarted to test your classes.
- You have to set the log levels appropriately for your classes using SM53 / SM52.
- You can also perform VMC debug through Eclipse.
all of the details are available in the pricing exit manual*

How to achieve SUBMIT for the current page when I click other tab?

Problem: How to achieve SUBMIT for the current page when I click other tab?
Description: I have a two-page application and each page associates with a tab. Say page1 associates tab1 and page2 associates tab2. In each page, I have a submit button, a after submit process associated to the submit button, and a tabular form. For page1, I fill out the fields and hit the button. The page1 will appear again and I can see the data I have insert. However, If I fill out the fields and click the tab2 (page 2) instead. when I come back to page1, the data I filled out are all gone. Is there any way in HTML DB to force the submit in the current page after you click other page. If use JavaScript, what is code looks like.
Appreciate your time and your answer.
Mike

Scott,
just for clarity, if I understood correctly what you said there are two possibilities:
1) keep the standard tab branch and give up the possibility of validating page items. Below you can find an example of such cases.
2) Replace the template substitution string and perform a "custom" button-like submit also adding a branch to the main page associated with the tab. Page items will be validated if the branch firing point is set after the validations.
I couldn't find an example of the latter, but I found easily an example of the former:
it's the "Report attributes", page 420 of app 4000.
If you enter 'aaa' in the "Number of rows" form field and then you press "apply changes", htmldb correctly displays an inline error message saying that the value must be numeric. On the contrary, if you click on the "Region Definition" tab, htmldb takes you to a page showing an oracle exception:
ORA-20001: Error in DML: p_rowid=4785927011172906402, p_alt_rowid=ID, p_rowid2=, p_alt_rowid2=. ORA-20001: Invalid numeric value aaa for column PLUG_QUERY_NUM_ROWS
Bye,
Flavio

How do you resize photos on a page of a book created in iPhoto '09?

How do you resize photos on a page of a book created in iPhoto '09? I can zoom in or out, but I can't figure out how to make a photo smaller. Is this just because I am working in a Contemporary book format, using a 2 photos per page layout? I'd like to work with maximum flexibility, like starting from the blank template in iWeb, where I can add any number of photos, text, and change all the sizes. Is this possible? Thanks.

Chrickie
Welcome to the Apple user to user assistance forums
How do you resize photos on a page of a book created in iPhoto '09? I can zoom in or out, but I can't figure out how to make a photo smaller.
You resize the photo by clicking on it and zooming
You can not resize the photo frame
Is this just because I am working in a Contemporary book format, using a 2 photos per page layout?
No they all work the same - see Liz Castro's page - http://www.lizcastro.com/iphotobookthemes/ - for a detailed description of iPhoto '08 layouts - all of those carry forward to iPhoto '09 plus there are new ones that she has not documented yet
I'd like to work with maximum flexibility, like starting from the blank template in iWeb, where I can add any number of photos, text, and change all the sizes. Is this possible?
Not in iWeb but you can do pages in any page layout program (word, pagemaker, pages, etc) and print to PDF using the send PDF to iPhoto option to create a totally custom page - see Old Toad's tutorial #19 - http://web.mac.com/toad.hall/OldToadsTutorials/No._19.html - for directions
LN

How do you stop an update on Pages without losing your data?

how do you stop an update on Pages without losing your data? i've connected my ipad to my phone's internet network through tethering. it's been ages already. but Pages is still not fully updated and i just wanna stop it anyway without losing my work inside...can anyone please shed light on this? i'd be absolutely certainty definitely grateful!!!!!!!!!!!!!!!!

You can try pausing the download by tapping on the Pages icon, but you may not be able to use Pages until the update completes. I don't know that for sure, but I wouldn't want to take the chance on corrupting the app and maybe the files.

How do you test for end of page

Similar Messages

Maybe you are looking for