How do you use the status column to show progress of a step in an OI?

Hi everyone,
I was just doing a little browsing and noticed the picture at the top of the http://www.ni.com/teststand/ web page. It shows a progress bar in the status column of a step being executed.
I have several applications where this would be a very useful addition. I use the progress bar at the bottom of the OI and sequence editor regularly, but would very much like to show progress of an individual step in the status column. It would be particularly useful where you turn the tracing off into a sequence but want to see that progress is being made through the steps within it...
Anyone know how to do this? I have been unsuccessful in trying to find examples....
Cheers,
Barry

James,
I believe your answer to Bazza's question also applies to my situation, but I wasn't sure so I thought I would ask. I am working on a custom TestStand operator interface in LabVIEW using the UI controls. I would like it to behave as closely as possible to the old Test Executive. Specifically, I would like the operator to be able to see the contents of the sequence file, interact with them, and see the execution results all in the same view. Is that possible? In other words, can I display and interact with a sequence file (display the sequence steps, run selected steps, loop selected steps, etc.) and display the sequence's execution results (including tracing) in the same SequenceView control or do I have to use 2 of them?
Thanks,
Ryan Wright

Similar Messages

In windows 8 how do you make the bookmarks column "flexible"? I used to be able to make it narrower.

Windows 8 how do you make the bookmarks column "flexible"?

Is the problem with the Bookmarks Sidebar -- the one you can open and close by pressing Ctrl+b? It does seem to have a minimum width and won't get narrower than that, but I'm not sure whether you are running into that limitation or whether for some reason you are not getting the resizing arrow when you mouse over the thin border between the sidebar and the page.

How do you use the Multiple Item Information dialog box ???

How do you use the Multiple Item Information dialog box ???
Where are the instructions on how the information in the Multiple Item Information dialog box equates to ...
1. The way iTunes sorts tracks and albums
2. The reason to select a leading check box
3. Why there are Option selections (Yes /No) and leading check boxes.
4. Why some changes remain in the track info, but do not "take effect" in iTunes (Part of a compilation is an example)
Looked in Help, Support, went to the local Genius bar for an hour, even arrainged a call from apple support ...
Thanks

As Christopher says, it's a compilation. Different tracks are by different artists.
Setting the *Album Artist* field to *Various Artists* and setting *Part of a compilation* to Yes should be all that is required. Depending on your *Group compilations when browsing* setting ( I recommend On ) either should suffice but I suggest doing both.
Based on your commentary, I selected all the "O Brother" tracks, and checked the boxes for everything line that was blank in the Info and the Sort panes. Only exceptions were the album name and the disc number 1 of 1 and the artwork. I blanked and checked anything else.
That's not what I meant. When you select multiple tracks, only those values which +are already common+ to all tracks are displayed. Typically these will include Artist, though not with compilation albums, Album Artist, Album, No. of Tracks, Genre plus various sort fields. A blank value may indicate that different tracks have different values or it may be that the value is blank for all tracks. For the drop down values on the Options tab the value shown may not reflect the information in every tag. If values you expect to be common, such as Album Artist or the Album title are not displayed you can simply type these in and click OK. This will often be enough to group the album.
If you place a checkmark against the blank boxes and apply changes then you will clear those fields so you should only do this if that is the effect you want. Putting a checkmark next to an empty (representing different values) *Track No.* box, for example, will just clear the all the track numbers which is very rarely useful.
Adding then removing extra text is for a specific problem where despite all common values being identical across the tracks of the album iTunes seems to "remember" that it should see two albums. A typical example would be when an album originally listed as *Album CD1* & *Album CD2* is given disc numbers X of Y and then has the Album name changed to Album. I've seen iTunes merge all but one track into the new album, but insist on listing one remaining track separately, despite both albums having the same title. In this case I've found overtyping the album title again has no effect whereas changing it to AlbumX and then back to Album does what I was trying to achieve in the first place.
Don't forget that even properly organsied albums may still break up if you don't chose an album-friendly view. Sorting on the track name or track number columns can be useful in some circumstances but in general I revert to Album by Artist when browsing through my library.
tt2

How do you count the multiple columns of a field in a table

How do you count the multiple columns of a field in a table

Hi,
4396bf34-e890-4202-a6b0-4e08c9ff0e89 wrote:
How do you count the multiple columns of a field in a table
Whenever you have a problem, post a little sample data (CREATE TABLE and INSERT statements, relevant columns only) for all tables involved, and also post the results you want from that data.
Explain, using specific examples, how you get those results from that data.
Always say which version of Oracle you're using (e.g., 11.2.0.2.0).
See the forum FAQ: https://forums.oracle.com/message/9362002
"Field" isn't a standard database term. Some people say "field" when they mean "column", but I don't think that's what you mean ("How do you count the multiple columns of a column .."). Do you want to know how many times a column is used (as opposed to NULL), or the number of different values in a column? You really need to show what you want.

How can you use the same e-mail address for multiple ipads?

I have two iPads.. an iPad and an ipad 2. I registared my new ipad 2 and now my old ipad is will not let me log on and is telling me that my e-mail address is already in use. how can you use the same e-mail address for multiple ipads?

And by using the same Apple ID you can also share purchases. If you have a different Apple ID for each iPhone then you can't share purchases.

How do you use the bluetooth VIs with a Microsoft Bluetooth Driver?

How do you use the LabVIEW Bluetooth VIs with the Microsoft Bluetooth driver? I have been trying with no such luck.
   I want to use 2 computers to talk to each other using the bluetooth VIs.  Eventually, I think we would like a PDA/phone to talk to a custom built electronics board with Bluetooth. But for now, I would just like 2 computers to talk and then eventually talk to our own device.
One is a desktop w/ the Belkin F8T012 USB adapter. It installs fine with the Belkin driver (but I know I need to use the Microsoft Driver in order to use the LabVIEW VIs, but I have tried to get Windows to install its own but it says it is a BCM92045DG-Flash. It says it cannot install it because it cannot find the necessary hardware. I thought this USB adapter was on the approved Bluetooth devices list? What else should I try? Another Bluetooth USB adapter?
The other computer is a Dell Latitude 820. It has a built in Bluetooth module which I believe is the Dell 350 Bluetooth Module. On this machine I have been able to setup a COM port with a bluetooth device (blood glucose meter). It came with a serial port interface which we modifed to go through a bluetooth interface. It comes up as COM40. We have been able to communicate to it using their program originally designed to talk through a serial port. But we would like to use the Bluetooth VIs in LabVIEW. I can't even use the Discover VI.  Perhaps it is not using the Microsoft Driver as well. Do I just uninstall the driver and then try to have Windows install its own driver? Do you have any other recommendations?
Thanks,
Javi

Hi Javi,
This sounds like an issue with Windows and your specific Bluetooth devices. As you mentioned, the LV Bluetooth VI's do require that the devices use the Windows drivers. Take a look at this link for specific requirements for using Bluetooth with LabVIEW. Also, you can take a look at our Developer Zone tutorial on designing Bluetooth applications a found here. Regarding your device drivers, sometimes it is as easy as uninstalling the driver and then letting Windows discover the device and fine its own driver. You could check out the Microsoft Knowledgebase for more information. Thanks and have a great day!
Stephen S.
National Instruments
1 Test is worth 1000 expert opinions

How do you use the ATV with the remote when you place it out of sight?

I placed my ATV behind my tv, though it does not wake up and work with the remote control. How do you use the ATV in this type of situation? Will the Bluetooth keyboard work with it if it is behind the TV?
Thanks.

Yes bluetooth and wifi (remote app from your iPhone) are far more likely to work for you.

How do you change the status of a survey in CRM_SURVEY_SUITE?

Hi,
How do you change the status of a survey in CRM_SURVEY_SUITE, e.g. from Activated to not?
Thanks!

Hello Anne,
I would like to suggest you that once you have created any survey and activated it there is no such option to deactivate it.
The only option is that if you go and edit the survey then it deactivate the survey and creates a new version of the same.
thanks
Willie

How can you modify the displayed columns on a Related Information List?

How can you modify the displayed columns on a Related Information List? For example, how could you add the "Type" column to the List of columns displayed for Service Requests when you are viewing the Contacts Detail page?
Thanks

I'd have to say I think this is one of the biggest flaws in the OnDemand system currently. The solution I have come up with is to create reports and put them in webapplets showing the data I want to show. I have then removed the standard Related Info List Objects and added weblinks to create new records as the button on the List object is also gone.
Keep in mind that doing this does slow things down a little, so it may not work if you have a big user base.
RWB.

How do you keep the browser heading from showing?

How do you keep the browser heading from showing in the
output? I did this once but can't figure out how!
Thanks in advance,
Rosie

You asked...
quote:
Is there a way to shrink the application you're capturing so it
fits within a given capture window rather than requiring scrolling,
or would I have to go back to the application developers for that?
(I realize that would shrink the size of everything on the screen,
but in some cases, that would be worth it to be able to show a
window without scrolling.
If, by "shrink" ... you mean by using the AppSizer, the
answer is "not really". You can configure AppSizer to a defined
size, then with the mouse pointer double-arrowed on the "edge" of a
window, right-click and your window-size selections will appear in
the AppSizer "list" (that you set up) and can be selected there.
But there is no re-scaling of the window contents, if that is
what you mean, so the smaller window may now require scrolling.
But keep in mind that if you use the recording option for
"Software Simulation" > "Custom Size", you can then snap the
application window to that size...

With IOS 7.0 How do you change the Color Red, that shows up on the Calendar to another color? People with certain eye problems cannot tolerate the color Red.

How do you change the Color Red, that shows up on various points of the Calendar to another color? Persons with certain eye problems have visual irritations that can be caused by the color Red. This problem came up with the update to IOS 7.0.

Sorry but you cant

Just got a new Macbook Pro with Maverick. In Mail, how do you get the format bar to show?

Just got a new Macbook Pro with Maverick. In Mail, how do you get the format bar to show?

You are still under warranty. Call Apple Care. Make sure you get a case number as all repairs have an additional 90 days of warranty.
#1 - You have 14 days from the date of purchase to return your computer with no questions asked.
#2 - You have 90 days of FREE phone tech support.
#3 - You have the standard one year Apple warranty.
#4 - If you've purchased an AppleCare Protection Plan, your warranty last for 3 years. You can obtain AppleCare anytime up to the first year of the purchase of your computer.
Take FULL advantage of your warranty. Posting on a message board should be done as a last resort and if you are out of warranty or Apple Care has expired.

How do you use the wdeploy tool in iPlanet Web Server with Windows 2000 Server?

I found this on the knowledge base, but only described how to use this with Unix. Does this work with Windows? How do you set the IWS_SERVER_HOME environment variable as well? I don't see it in the file.
Thanks

Hi,
This is pretty common scenario. The best way to achieve this is to split your servers using a collection and deploy a different client settings. You could target your collection using the OS or an OU in AD. There are many option there.
You could also limit the access to the Server collection using Role Based Access to avoid any human "errors" on these collections. Users without rights to these collection just won't see them.
https://technet.microsoft.com/en-us/library/gg682067.aspx?f=255&MSPPError=-2147217396
http://blogs.technet.com/b/configmgrteam/archive/2011/09/23/introducing-role-based-administration-in-system-center-2012-configuration-manager.aspx
Benoit Lecours | Blog: System Center Dudes

HT3176 How do you use the submit command?

HOw do I use the Apple TV remote to submit after typing?

You can use Runtime.exec to execute other processes from Java. You'll want to read this though:
http://www.javaworld.com/javaworld/jw-12-2000/jw-1229-traps.html

How are you using the Namespace Prefix?

As the subject says...
The top-level namespace prefix looks very useful for segregating projects into their own namespaces...is this what this is for, or does SAP have another recommended use for this prefix?
The vendor name already makes the namespace unique to a corporate entity (if you use the domain name), so anything after that is really only of importance to the internal development environment...

Even if your development isn't that big, using the 'name space prefix' would allow you to further segregate your codebase.
This also becomes important when your domain name is rather long - 15 characters. Take away four or so more for the namespace prefix, and you're left with 20 characters for the DC name. Add in a few separators, and you're down to 12-15 characters.
Obviously, readability can suffer when you start to abbreviate too much, so I'm looking for best practices when it comes to the namespace prefix.
Thanks for your comment.

How do you use the status column to show progress of a step in an OI?

Similar Messages

Maybe you are looking for