How does a case for a mini ensure it goes on sleep mode

I cant lock the screen on my ipad Mini when my smart case covers it...where is this in settings to enable that function

Hello bburkholder,
I would suggest following the document at the link below. It sounds like you have done some of the steps within the document, but the other steps may provide you a solution.
http://h10025.www1.hp.com/ewfrf/wc/document?docnam​e=c02844556&tmp_task=solveCategory&cc=us&dlc=en&la​...
If I have solved your issue, please feel free to provide kudos and make sure you mark this thread as solution provided!
Although I work for HP, my posts and replies are my own opinion and not those of HP.

Similar Messages

  • Can't wake mini after it goes into sleep mode

    Hi, My mac mini 2010 model will not wake from sleep mode. The computer also shuts down by itself if left on overnight.
    Any ideas?

    Try following the following steps to reset your Mac mini's System Management Controller (SMC), the electronics on your logic board which control your computer's power state (see http://support.apple.com/kb/HT3964):
    Shut down the Mac mini.
    Unplug its power cord and wait 15 seconds.
    Reconnect and wait 5 seconds.
    Switch the Mac mini on.
    If that does not solve the problem, there are a few possibilities:
    1) I know it's obvious, but have you checked that "Schedule..." in Energy Saver Preferences is not accidentally set to shut down?
    2) What is the power supply to the Mac mini's power adapter like? I have seen a few rare instances where power supply issues can cause the SMC to get confused in these cases. You could try using a known-good power supply and/or swapping to a less loaded power socket. I know it sounds unlikely, but I have seen at least one occasion where this solved strange sleep/wake behaviours of Minis.
    3) Finally, the worst case is that your logic board is faulty.
    If you've done all of the above and have no luck, bring your Mac mini and its power adapter to your local Apple Authorised Service Provider or Apple Store for hardware diagnostics.

  • W510 does not wake up when it goes into Sleep mode - Windows 7 Bit

    Hi All,
    The Lenovo thinkpad w510 does not want to wake up once it goes into sleep mode, I have to push the power button until it shuts down completely and then reboot it completely, I have tried different settings in the power management etc. We have the same pissue on 3 different w510`s with Windows 7 pro 64 Bit
    Has anybody got a solution for this problem?
    Regards,
    Solved!
    Go to Solution.

    Hi russellwth,
    Welcome To Lenovo Forums.
    This issue has been solved with the latest BIOS for the W510. 
    Please check our Knowledge Base Article regarding this issue.
    //JameZ
    Check out the Community Knowledge Base for hints and tips.
    Did someone help you today? Press the star on the left to thank them with a Kudo!
    If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"!
    X240 | 8GB RAM | 512GB Samsung SSD

  • Fans go on at full speed 1 min. after computer goes to sleep

    Problem: Fans go to full speed 1 min. after it goes to sleep-mode. The fans will stay on until it wakes up from sleep-mode.
    Computer: Apple Power Mac G5 Dual 2.3, OS 10.4.9, 4.5 GB RAM. 2 HD, late 2005 version.
    The problem happens every time I put it to sleep, even right after it has been turned on.
    I have measured the CPU temp to be as low as 36-40C and it will still turn the fans on high speed when put to sleep.
    I have reset the P-RAM and the SMU.
    I have installed a fresh version of OS 10.4.9 on second drive, booted from it and it still turn the fans on 1 minute after it goes to sleep.
    I have had all the RAM out beside the original RAM. I did an extended Apple Hardware test which passed.
    ...any ideas ?
    -e
    5 Macs in total   Mac OS X (10.4.9)  

    After trying all that, it sounds like it's hardware-related--possible logic board--but try this yet.
    Do an Open Firmware reset: Hold the CommandOption+OF keys during startup. At the '>' prompt type:
     >reset-nvram
     Return
      >set-defaults
     Return
      >reset-all
     Return
    The reason the fans are taking off, is because the OS stops communicating with the logic board.
    -Bmer
    Mac Owners Support Group
    Join Us @ MacOSG.com
    iTunes: MacOSG Podcast
     An Apple User Group 

  • How does APEX check for null values in Text Fields on the forms?

    Hello all,
    How does APEX check for null values in Text Fields on the forms? This might sound trivial but I have a problem with a PL/SQL Validation that I have written.
    I have one select list (P108_CLUSTER_ID) and one Text field (P108_PRIVATE_IP). I made P108_CLUSTER_ID to return null value when nothing is selected and assumed P108_PRIVATE_IP to return null value too when nothign is entered in the text field.
    All that I need is to validate if P108_PRIVATE_IP is entered when a P108_CLUSTER_ID is selected. i.e it is mandatory to enter Private IP when a cluster is seelcted and following is my Pl/SQL code
    Declare
    v_valid boolean;
    Begin
    IF :P108_CLUSTER_ID is NULL and :P108_PRIVATE_IP is NULL THEN
    v_valid := TRUE;
    ELSIF :P108_CLUSTER_ID is NOT NULL and :P108_PRIVATE_IP is NOT NULL THEN
    v_valid := TRUE;
    ELSIF :P108_CLUSTER_ID is NOT NULL and :P108_PRIVATE_IP is NULL THEN
    v_valid := FALSE;
    ELSIF :P108_CLUSTER_ID is NULL and :P108_PRIVATE_IP is NOT NULL THEN
    v_valid := FALSE;
    END IF;
    return v_valid;
    END;
    My problem is it is returning FALSE for all the cases.It works fine in SQL Command though..When I tried to Debug and use Firebug, I found that Text fields are not stored a null by default but as empty strings "" . Now I tried modifying my PL/SQL to check Private_IP against an empty string. But doesn't help. Can someone please tell me how I need to proceed.
    Thanks

    See SQL report for LIKE SEARCH I have just explained how Select list return value works..
    Cheers,
    Hari

  • Hi i want to send an ipad of a gift to a friend in italy, can it be done? will the wifi and 3g still work? also how does it work for a warrenty?

    hi i want to send an ipad of a gift to a friend in italy, can it be done? will the wifi and 3g still work? also how does it work for a warrenty?

    WiFi will work, cellular will work but they may not be able to access LTE, they will have to send it back to you for the warranty work.

  • How to download skype for ipad mini

    Please help me how to download skype for ipad mini..thanks!

    Access the App Store, search for Skype, download.

  • How does one check for Updates...

    How does one check for Updates when :
    Registration
    Deactivation
    Updates
    Menu items are greyed out! ?

    Actually, it's a timing issue. Those items are greyed out for a couple of minutes after PPro starts. A little patience and they become available. ;)
    Cheers
    Eddie
    PremiereProPedia   (
    RSS feed)
    - Over 300 frequently answered questions
    - Over 250 free tutorials
    - Maintained by editors like
    you
    Forum FAQ

  • How does creative cloud for Enterprises licensing works?

    how does creative cloud for Enterprises licensing works? witch is the method of verification of keys?
    how does it works with active directory?

    There is no difference please be aware that each login is provided with two activations however.  If you wish to have a computer at both work and home activated though that is perfectly fine as long as your employer is ok with using company software at home.

  • Why does CC start verification process every time I open it? It even starts asking for license key and sometimes goes into trial mode.

    When ever I open Adobe CC it starts verification process and asks for Serial No. And then goes into trial mode. I have to open it several times for it to run in proper licensed mode.

    Sign in, activation, or connection errors | CC, CS6, CS5.5
    Mylenium

  • Late 2012 Mac mini with OSX 10.8.2 has started shutting down instead of going into sleep mode.

    Sometime in the last week or so my mac mini has started going into full shut down instead of sleep mode.
    I have tried checking and unchecking energy saver boxes but haven't found anything which will get me back to where I used to be - and I haven't knowingly changed anything to make this happen.- maybe an OS update caused it?
    The machine will fire up with a tablet click rather than needing the reset button to be pushed so clearly the machine is sort of halfway between sleep and full 'off'. Most frustrating as one of the key issues for me in getting this my first mac was its easy sleep and super quick fire up compared to windows.
    Any help appreciated
    Oh yes  I just remembered that I did just install 2 8gb of crucial RAM (to replace the supplied 2 2gb but surely that can't have anything to do with it - can it)?

    Adding to my first post I can now advise that when the mac goes into sleep mode the light on the front stays on (it does not pulse so clearly it is not really sleeping).
    When i click the tablet / keyboard this is actually what triggers the mac to reboot
    I have tried resetting the SMC as per the following link to no avail
    http://macs.about.com/od/usingyourmac/qt/Resetting-The-Smc-System-Management-Con troller-On-Your-Mac.htm
    Help please!

  • My macbook boots up and only stays on for 30sec and goes into sleep mode

    My macbook boots up and only stays on for 30sec and goes into sleep mode! Any suggestions as to why this might be happening? Thanks....

    I assume you have checked your sleep settings in System Preferences>Energy saver
    I also assume this has just happened recently and spontaneously, not after installing any particular hardware or software or you would probably have mentioned it...if anything new has been added recently, obviously just remove it!
    It could be the battery - have your tried it just on mains? If it's a pre unibody MacBook try it without the battery at all. This could happen if you have a non-Apple (cheap Chinese) replacement battery.
    Try NVRAM, PRAM & SMC resets (Google if you don't know how)
    Try booting from the install media and repairing or reinstalling OS X. (Back up first!)
    Just out of interest if you boot from a DVD or go into Open Firmware or Boot Select modes, does it still sleep after 30 seconds or is it just in OS X?

  • Mac Mini i7 After Yosemite update, sleep mode affecting internet connection

    Hi,
    I got a Mac Mini i7 for July 2014 everything was awesome.  On Monday, October 27th 2014, I notice the port where my Mac Mini is connected, the light is amber colour.  When this happens there's no internet connection for the Mac Mini and affects the router has it slows the connection.  After doing the following:
    1. Turn off Modem for 20mins (hard reset)
    2. Turn off Router for 20mins (hard reset)-Router Netgear WNDR4000
    3. Set Service Order
    4. Change Ethernet Cable
    5. Renew the DHCP
    I found out the when the Mac Mini goes to sleep mode thats when connections drops.  I test where i set it to 1min and voila the port is now amber colour.
    I don't want to keep the Mac Mini i7 in "never" status has it decrease life. 
    Put hard disk to sleep when possible and Wake for network access are checked.
    Of course before the update, everything was working fine.  Any ideas is appreciated.
    Thanks,
    Retsel Adrec

    Re-installing Yosemite fixed this problem.
    Thanks.

  • Mac mini didn't go into sleep mode when i am conect my thunderbolt display whit an optical thunderbolt cable

    hello my mac mini didn't go into sleep mode when i am using an optical thunderbolt cable to my thunderbolt display
    has any body els this problem

    Hello josfromkerkade.  Please contact me so that I can get more details. 
    We'd like to understand which monitor you're using, how old it is, which Thunderbolt port you're using (tethered cable or TB port), & the version of firmware. 
    [email protected]
    Thanks, Mitch

  • How can I select shutdown & close the display w/o going into sleep mode?

    I have learned to wait untill the MBP full shuts down before closing the display. In the past I have pressed shutdown closed the display only to find out later the MBP goes into sleep mode before fully shuting down. When I reopen the display the computer finishes the shutdown process or worse the battery is dead.
    I would like to select shut down, close the display and walk away while the computer completes the shutdown process.
    Is there any setup options or apps. that will allow this?
    Thanks, Joe
    (new to the mac)
    MBP   Mac OS X (10.4.6)  

    Well hello there, and welcome to Macintosh.
    Unfortunately you can't change anything to stop this from happening. The shutdwn process goes about its business killing processes and applications that have been running. The sleep process interrupts ALL business going on in the OS, and puts the machine into low power mode, as it is not aware of the nature of the running processes (in this case, the shutdown process), knowing only that they must be slept and the machine dropped into sleep mode. You gotta wait it out before you close the lid.
    I would suggest sending a message in OS X feedback requesting this as a feature!
    If you find this response helpful or if it solves your issue, please click the appropriate icon in the header of this reply.

Maybe you are looking for