How does a java code tell a backspace is entered by a GUI user?

How to design a java code, so that the code catches a
backspace a GUI user enters?

search for keyEvent and VK_BACKSPACE

Similar Messages

  • ColdFusion 11: cfclient ... how does normal CFML code and cfclient code interact?

    G'day:
    I am reposting this from my blog ("ColdFusion 11: ... how does normal CFML code and  code interact?") at the suggestion of Adobe support:
    @dacCfml @ColdFusion Can you post your queries at http://t.co/8UF4uCajTC for all cfclient and mobile queries.— Anit Kumar Panda (@anitkumar85) April 29, 2014
    I have edited this in places to remove language that will be deemed inappropriate by the censors here. Changes I have made are in [square brackets]. The forums software here has broken some of the styling, but so be it.
    G'day:
    Another quick one. I'm raising these quick-fire questions here because Adobe have declined to suggest a better place to raise them, other than as comments on one of their blog entries. Well that was Ram's suggestion (which I don't think is terribly-well thought out). He declined to react to my suggestion that the Adobe ColdFusion forums might be a good place. Anit suggested Twitter or just emailing him, but I think there'd be public interest in this stuff, so don't want to resort to email.
    As I'm the master of what goes on on this blog: I'll clutter this thing up.
    Say I want to have a mix of "normal" CFML and <cfclient>-based CFML in the same file. I can only presume the intent is to allow this, otherwise having <cfclient> as a tag rather than just a file extension seems like a poor approach. Obviously if one can have a start tag and an end tag, then code can come before (and I guess after) the <cfclient> tags themselves.
    So I'd expect this to work:
    <cfset message = "G'day World"> <cfclient> <cfoutput>#message#</cfoutput> </cfclient>
    However all I get is an error in JS:
    Uncaught ReferenceError: message is not defined variablesScopeVariable.cfm:4
    And, indeed, the only mention of message in the JS source is the one that's erroring (as it's on the right-hand side of an assignment).
    So I thought perhaps <cfclient> worked like <cfthread> and I needed to pass attributes into it:
    <cfset message = "G'day World"> <cfclient message="#message#"> <cfoutput>#message#</cfoutput> </cfclient>
    This doesn't compile:
    Attribute validation error for the client tag.
    The tag does not have an attribute called message. The valid attribute(s) are ''.
    ColdFusion cannot determine the line of the template that caused this error.This is often caused by an error in the exception handling subsystem.
    Note also there's an error in the error message itself. It's not the <client> tag, it's the <cfclient> tag.
    Rightio then, so I tried just using the request scope instead (the code's the same as the variables-scoped example, except using the request scope). No dice: same JS error.
    As a last ditch effort, I just tried to see if <cfclient> was aware of anything going on around it, by passing a value on the URL, and seeing if <cfclient> saw that, eg:
    <cfclient> <cfoutput>#URL.message#</cfoutput> </cfclient>
    This behaved differently from the variables- / request- scoped examples, in that I didn't get a JS error, I just got this on the screen:
    undefined
    And no JS error. It pains me to have to do this, but let's look at the generated JS to see why the behaviour is different:
    Variables scope example:
    <script type="text/javascript" src="/CFIDE/cfclient/cfclient_main.js"></script> <script type="text/javascript" src="/CFIDE/cfclient/cffunctions.js"></script> <meta name="viewport" content="width=device-width"> <script type='text/javascript'> globalDivStruct=null; var _$variablesScopeVariable_func=function(){     var self=this;     var variables={};     self.__init=function(){         var localdivstruct=globalDivStruct;         var __output_var="";         var tmpVarArray={};         localdivstruct.outputvar+=message;        return""     } }; function __startPage__$variablesScopeVariable(){     document.write("\x3cdiv id\x3d'__cfclient_0'\x3e\x3c/div\x3e");     window.ispgbuild=false;     var clientDivStruct={         divId        : "__cfclient_0",         outputvar    :""     };     globalDivStruct=clientDivStruct;     try{         _$variablesScopeVariable=new _$variablesScopeVariable_func;         _$variablesScopeVariable.__init()     }     catch(__eArg){         if(__eArg!=="$$$cfclient_abort$$$")             throw __eArg;     }     __$cf.__flush(clientDivStruct) } __startPage__$variablesScopeVariable(); </script>
    The only significant difference (other than function names, based on the file names) between this and the URL-scoped example is the indicated line above is replaced by this in the URL example:
    localdivstruct.outputvar+=__$cf.__arrayGet(URL,"message",true);
    So it's like it's trying to do the right thing, but just failing. I thought it might be because CF does stupid thinks with scope-key casing, and changed the <cfclient> code to expect URL.MESSAGE not URL.message, but this didn't work either.
    So I'm flummoxed. I can't find anything in any documentation which might point me in the right direction, so anyone know what the story is here?
    Update:At Joel's suggestion I tried this:
    <script> message = "G'day World"; </script> <cfclient> <cfoutput>#message#</cfoutput> </cfclient>
    Thisworked. Which elicits from me a mixture of "heh: cute" and "this is an abomination". 
    Adam

    PaulNibin wrote:
    Hi Adam,
    When you write code inside <cfclient>, it is translated to java script. It cannot access server side variables(defined outside cfclient).
    <script> message = "G'day World"; </script> <cfclient> <cfoutput>#message#</cfoutput> </cfclient>
    The above code works because, message is defined in a script block and client side CFML is interoprable with javascript. So client side CFML can use variables, functions defined in javascript blocks.
    Thanks,
    Paul
    So you're saying you did not provide a mechanism for transferring the variables from the server-side part of a file's code to the client side part? Is this not a bit of an oversight?
    And what - in your mind - is the point of having a file with blocks of both normal CFML, and then a <cfclient> block, then more CFML, then another <cfclient> block (for example) if the code cannot interact?
    Adam

  • How to embid java code in JavaScript

    Hi!!
    I am writing JSP program.
    Do u know how to embid java code in javascirpt
    ex:
    <SCRIPT>
    alert("hello");
    <%
    System.out.println("Hello...Satish. ");
    %>
    </SCRIPT>
    This alert message is not comming when i add the java code.

    Do u know how to embid java code in javascirptYou can't.
    Java/JSP code runs, and produces a web page. At this point any html/javascript is treated just as "text" to output.
    That web page is then sent to the browser which runs javascript.
    All java code has been run/removed - maybe generating HTML in its place.
    The only way to call java code again is to submit an HTTP request - normally by clicking a link/submitting a form.

  • How to use Java code inside WebDynpro-ABAP

    Hi,
        How to use Java code inside WebDynpro-ABAP.
    Could any one provide sample code.
    Cheers,
    Sam

    Hi Sam,
    We can't Bring Java Inside the ABAP. Both are running in different Environments.
    and also ABAP Codes are runs on BASIS.
    -Basis is a middleware between ABAP codes and Ur OS.
    -Contains set of programs to load,RUN,intepret the ABAP program..
    So Both are Different.
    Regards,
    Ramganesan K.

  • How to write java code to read the pixel color in some place of screen?

    Hello all:
    How to write java code to read the pixel color in some place of screen?
    The java application iteself doesn't have any GUI.
    thank you
    -Danel

    See java.awt.Robot

  • How does a CIN code works in LabVIEW?

    hi..can any one explain as to how a CIN code (written in c/c++) works in LabVIEW.Do we have to import the c/c++ file too when we import the respective VI? How does the CIN code work in an exe file without having to load the C/C++ code?

    When you create the VI that calls the CIN you load the binary object code into the code interface node itself and it's stored as part of the VI. Hence you don't need to include anything special in your build. Mike...
    Certified Professional Instructor
    Certified LabVIEW Architect
    LabVIEW Champion
    "... after all, He's not a tame lion..."
    Be thinking ahead and mark your dance card for NI Week 2015 now: TS 6139 - Object Oriented First Steps

  • How does the Java Card simulator work? (Using NetBeans)

    Hi,
    I'm using NetBeans and am trying to simulate:
    Someone powering up the card, saving a value, and powering down... And then they power it up again, get the value, and power down.
    When I edit my APDU script to do the second part, the value I entered the first time is never stored, which probably means that when I 'run' my code, my application is loaded and everything is initialized again.
    How do I edit NetBeans to not install the application every time I hit 'run'? And not to initialize the values, so that when i power it up again, I can get a value stored in a previous running of a script?
    When I use powerup, powerdown and then powerup again, NetBeans doesn't powerup the simulator the second time. So understanding the Java Card Simulator would also help... where it is, how it runs, what options it runs with, etc.

    Hi Shane,
    I have not read anywhere else that the JC3 cards are not available, thank you so much for that tip! I am not doing it for research, but I am working on this alone and will have to deploy a card later on. I will be getting all the right versions now.
    I'll ask the question then, using just the JCDK:
    If I want to save a value on the card, and then need it at a later time, how do I go about it. Do I do the following?
    (1) Install the application on the card. (I know how to do this)
    (2) Run the simulator using -o "eeprom data filename"
    (3) Save the value using the APDU calls and Java code on the card + close connection.
    Code:
    public class MyApp extends Applet {
        private static byte[] data = {0x00, 0x00, 0x00};
        // Install method, method to register, process method that can call saveData or recallData, etc
        public static void saveData()
           // code to change data
           data = {0x01, 0x01, 0x01};
        public static byte[] recallData()
           // code to return data
           return data;
    }(4) Run the simulator using -i "eeprom data filename". get the value using recallData().
    Will selecting the app not make data initialize to {0x00, 0x00, 0x00} again?
    If I know this is the correct way of going about it, then I can work towards it getting done.
    From other examples I can see that this is probably the way it should work, but my data array always returns as {0x00, 0x00, 0x00}.

  • How does the Java card simulator work? and other misc questions

    First, I have a class inherited from Applet. Okay, I did that.
    How do I convert this class to a CAP file? I mean I have a class file which is compiled by javac, do I use this file to convert into a CAP file? What is an AID? Do I make up this AID?
    In this .scr file (APDU Script), I understand the first 4 bytes, it means to create an Applet, but what about the rest? I know there are some intermixes of lengths and AIDs, I just can't decipher this.
    // create wallet applet
    0x80 0xB8 0x00 0x00 0x14 0x0a 0xa0 0x0 0x0 0x0 0x62 0x3 0x1 0xc 0x6 0x1 0x08 0 0 0x05 0x01 0x02 0x03 0x04 0x05 0x7F;
    And here comes the main question?
    How does the simulator work? How do I generate the data that mimics what the card reader reads?
    Thanks
    Jack

    At first blush,
    I have these when executing the RMIPurse sample according to the user guide
      [convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Skel: unsupported type long of field interfaceHash.
      [convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Skel: unsupported bytecode anewarray in clinit method.
      [convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Skel: unsupported bytecode new in clinit method.
      [convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Skel: unsupported bytecode invokespecial in clinit method.
      [convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Skel: unsupported parameter type String of invoked method <init>(java.lang.String) of class java.rmi.server.Operation.
      [convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Skel: unsupported bytecode aastore in clinit method.
      [convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Skel: unsupported bytecode new in clinit method.
      [convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Skel: unsupported bytecode invokespecial in clinit method.
      [convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Skel: unsupported parameter type String of invoked method <init>(java.lang.String) of class java.rmi.server.Operation.
      [convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Skel: unsupported bytecode aastore in clinit method.
      [convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Skel: unsupported bytecode new in clinit method.
      [convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Skel: unsupported bytecode invokespecial in clinit method.
      [convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Skel: unsupported parameter type String of invoked method <init>(java.lang.String) of class java.rmi.server.Operation.
      [convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Skel: unsupported bytecode aastore in clinit method.
      [convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Skel: unsupported bytecode new in clinit method.
      [convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Skel: unsupported bytecode invokespecial in clinit method.
      [convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Skel: unsupported parameter type String of invoked method <init>(java.lang.String) of class java.rmi.server.Operation.
      [convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Skel: unsupported bytecode aastore in clinit method.
      [convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Skel: unsupported bytecode new in clinit method.
      [convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Skel: unsupported bytecode invokespecial in clinit method.
      [convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Skel: unsupported parameter type String of invoked method <init>(java.lang.String) of class java.rmi.server.Operation.
      [convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Skel: unsupported bytecode aastore in clinit method.
      [convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Skel: unsupported parameter type long of method dispatch.
      [convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Skel: unsupported long type constant.
      [convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Skel: unsupported long type constant.
      [convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Skel: unsupported long type constant.
      [convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Skel: unsupported long type constant.
      [convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Skel: unsupported long type constant.
      [convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Skel: unsupported String type constant.
      [convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Skel: unsupported parameter type String of invoked method <init>(java.lang.String) of class java.rmi.UnmarshalException.
      [convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Skel: unsupported long type constant.
      [convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Skel: unsupported String type constant.
      [convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Skel: unsupported parameter type String of invoked method <init>(java.lang.String) of class java.rmi.server.SkeletonMismatchException.
      [convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Skel: unsupported String type constant.
      [convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Skel: unsupported parameter type String of invoked method <init>(java.lang.String, java.lang.Exception) of class java.rmi.UnmarshalException.
      [convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Skel: unsupported String type constant.
      [convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Skel: unsupported parameter type String of invoked method <init>(java.lang.String, java.lang.Exception) of class java.rmi.MarshalException.
      [convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Skel: unsupported String type constant.
      [convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Skel: unsupported parameter type String of invoked method <init>(java.lang.String, java.lang.Exception) of class java.rmi.UnmarshalException.
      [convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Skel: unsupported String type constant.
      [convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Skel: unsupported parameter type String of invoked method <init>(java.lang.String, java.lang.Exception) of class java.rmi.MarshalException.
      [convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Skel: unsupported String type constant.
      [convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Skel: unsupported parameter type String of invoked method <init>(java.lang.String, java.lang.Exception) of class java.rmi.MarshalException.
      [convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Skel: unsupported String type constant.
      [convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Skel: unsupported parameter type String of invoked method <init>(java.lang.String, java.lang.Exception) of class java.rmi.MarshalException.
      [convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Skel: unsupported String type constant.
      [convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Skel: unsupported parameter type String of invoked method <init>(java.lang.String, java.lang.Exception) of class java.rmi.UnmarshalException.
      [convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Skel: unsupported String type constant.
      [convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Skel: unsupported parameter type String of invoked method <init>(java.lang.String, java.lang.Exception) of class java.rmi.UnmarshalException.
      [convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Skel: unsupported String type constant.
      [convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Skel: unsupported parameter type String of invoked method <init>(java.lang.String, java.lang.Exception) of class java.rmi.MarshalException.
      [convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Skel: unsupported String type constant.
      [convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Skel: unsupported parameter type String of invoked method <init>(java.lang.String) of class java.rmi.UnmarshalException.
      [convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Stub: unsupported type long of field interfaceHash.
      [convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Stub: unsupported type long of field serialVersionUID.
      [convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Stub: unsupported bytecode anewarray in clinit method.
      [convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Stub: unsupported bytecode new in clinit method.
      [convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Stub: unsupported bytecode invokespecial in clinit method.
      [convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Stub: unsupported parameter type String of invoked method <init>(java.lang.String) of class java.rmi.server.Operation.
      [convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Stub: unsupported bytecode aastore in clinit method.
      [convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Stub: unsupported bytecode new in clinit method.
      [convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Stub: unsupported bytecode invokespecial in clinit method.
      [convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Stub: unsupported parameter type String of invoked method <init>(java.lang.String) of class java.rmi.server.Operation.
      [convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Stub: unsupported bytecode aastore in clinit method.
      [convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Stub: unsupported bytecode new in clinit method.
      [convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Stub: unsupported bytecode invokespecial in clinit method.
      [convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Stub: unsupported parameter type String of invoked method <init>(java.lang.String) of class java.rmi.server.Operation.
      [convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Stub: unsupported bytecode aastore in clinit method.
      [convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Stub: unsupported bytecode new in clinit method.
      [convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Stub: unsupported bytecode invokespecial in clinit method.
      [convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Stub: unsupported parameter type String of invoked method <init>(java.lang.String) of class java.rmi.server.Operation.
      [convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Stub: unsupported bytecode aastore in clinit method.
      [convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Stub: unsupported bytecode new in clinit method.
      [convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Stub: unsupported bytecode invokespecial in clinit method.
      [convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Stub: unsupported parameter type String of invoked method <init>(java.lang.String) of class java.rmi.server.Operation.
      [convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Stub: unsupported bytecode aastore in clinit method.
      [convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Stub: unhandled bytecode ifnull in clinit method, try a different compiler.
      [convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Stub: unhandled bytecode goto in clinit method, try a different compiler.
      [convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Stub: unsupported bytecode invokestatic in clinit method.
      [convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Stub: unsupported parameter type String of invoked method class$(java.lang.String) of class com.sun.jcclassic.samples.rmi.PurseImpl_Stub.
      [convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Stub: unsupported bytecode anewarray in clinit method.
      [convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Stub: unhandled bytecode ifnull in clinit method, try a different compiler.
      [convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Stub: unhandled bytecode goto in clinit method, try a different compiler.
      [convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Stub: unsupported bytecode invokestatic in clinit method.
      [convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Stub: unsupported parameter type String of invoked method class$(java.lang.String) of class com.sun.jcclassic.samples.rmi.PurseImpl_Stub.
      [convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Stub: unsupported bytecode aastore in clinit method.
      [convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Stub: unhandled bytecode ifnull in clinit method, try a different compiler.
      [convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Stub: unhandled bytecode goto in clinit method, try a different compiler.
      [convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Stub: unsupported bytecode invokestatic in clinit method.
      [convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Stub: unsupported parameter type String of invoked method class$(java.lang.String) of class com.sun.jcclassic.samples.rmi.PurseImpl_Stub.
      [convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Stub: unsupported bytecode aastore in clinit method.
      [convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Stub: unhandled bytecode ifnull in clinit method, try a different compiler.
      [convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Stub: unhandled bytecode goto in clinit method, try a different compiler.
      [convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Stub: unsupported bytecode invokestatic in clinit method.
      [convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Stub: unsupported parameter type String of invoked method class$(java.lang.String) of class com.sun.jcclassic.samples.rmi.PurseImpl_Stub.
      [convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Stub: unsupported bytecode aastore in clinit method.
      [convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Stub: unsupported bytecode aastore in clinit method.
      [convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Stub: unsupported bytecode invokevirtual in clinit method.
      [convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Stub: unsupported parameter type String of invoked method getMethod(java.lang.String, java.lang.Class[]) of class java.lang.Class.
      [convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Stub: unhandled bytecode pop in clinit method, try a different compiler.
      [convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Stub: unhandled bytecode ifnull in clinit method, try a different compiler.
      [convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Stub: unhandled bytecode goto in clinit method, try a different compiler.
      [convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Stub: unsupported bytecode invokestatic in clinit method.
      [convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Stub: unsupported parameter type String of invoked method class$(java.lang.String) of class com.sun.jcclassic.samples.rmi.PurseImpl_Stub.
      [convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Stub: unsupported bytecode anewarray in clinit method.
      [convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Stub: unsupported bytecode aastore in clinit method.
      [convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Stub: unsupported bytecode invokevirtual in clinit method.
      [convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Stub: unsupported parameter type String of invoked method getMethod(java.lang.String, java.lang.Class[]) of class java.lang.Class.
      [convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Stub: unhandled bytecode ifnull in clinit method, try a different compiler.
      [convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Stub: unhandled bytecode goto in clinit method, try a different compiler.
      [convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Stub: unsupported bytecode invokestatic in clinit method.
      [convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Stub: unsupported parameter type String of invoked method class$(java.lang.String) of class com.sun.jcclassic.samples.rmi.PurseImpl_Stub.
      [convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Stub: unsupported bytecode anewarray in clinit method.
      [convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Stub: unsupported bytecode aastore in clinit method.
      [convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Stub: unsupported bytecode invokevirtual in clinit method.
      [convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Stub: unsupported parameter type String of invoked method getMethod(java.lang.String, java.lang.Class[]) of class java.lang.Class.
      [convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Stub: unhandled bytecode ifnull in clinit method, try a different compiler.
      [convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Stub: unhandled bytecode goto in clinit method, try a different compiler.
      [convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Stub: unsupported bytecode invokestatic in clinit method.
      [convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Stub: unsupported parameter type String of invoked method class$(java.lang.String) of class com.sun.jcclassic.samples.rmi.PurseImpl_Stub.
      [convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Stub: unsupported bytecode anewarray in clinit method.
      [convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Stub: unsupported bytecode invokevirtual in clinit method.
      [convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Stub: unsupported parameter type String of invoked method getMethod(java.lang.String, java.lang.Class[]) of class java.lang.Class.
      [convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Stub: unhandled bytecode ifnull in clinit method, try a different compiler.
      [convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Stub: unhandled bytecode goto in clinit method, try a different compiler.
      [convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Stub: unsupported bytecode invokestatic in clinit method.
      [convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Stub: unsupported parameter type String of invoked method class$(java.lang.String) of class com.sun.jcclassic.samples.rmi.PurseImpl_Stub.
      [convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Stub: unsupported bytecode anewarray in clinit method.
      [convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Stub: unsupported bytecode invokevirtual in clinit method.
      [convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Stub: unsupported parameter type String of invoked method getMethod(java.lang.String, java.lang.Class[]) of class java.lang.Class.
      [convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Stub: unhandled bytecode ifnull in clinit method, try a different compiler.
      [convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Stub: unhandled bytecode goto in clinit method, try a different compiler.
      [convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Stub: unsupported bytecode invokestatic in clinit method.
      [convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Stub: unsupported parameter type String of invoked method class$(java.lang.String) of class com.sun.jcclassic.samples.rmi.PurseImpl_Stub.
      [convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Stub: unsupported bytecode anewarray in clinit method.
      [convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Stub: unhandled bytecode ifnull in clinit method, try a different compiler.
      [convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Stub: unhandled bytecode goto in clinit method, try a different compiler.
      [convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Stub: unsupported bytecode invokestatic in clinit method.
      [convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Stub: unsupported parameter type String of invoked method class$(java.lang.String) of class com.sun.jcclassic.samples.rmi.PurseImpl_Stub.
      [convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Stub: unsupported bytecode aastore in clinit method.
      [convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Stub: unsupported bytecode invokevirtual in clinit method.
      [convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Stub: unsupported parameter type String of invoked method getMethod(java.lang.String, java.lang.Class[]) of class java.lang.Class.
      [convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Stub: unhandled bytecode goto in clinit method, try a different compiler.
      [convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Stub: unhandled bytecode pop in clinit method, try a different compiler.
      [convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Stub: unsupported parameter type String of method class$.
      [convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Stub: unsupported parameter type String of invoked method forName(java.lang.String) of class java.lang.Class.
      [convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Stub: unsupported return type String of invoked method getMessage() of class java.lang.Throwable.
      [convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Stub: unsupported parameter type String of invoked method <init>(java.lang.String) of class java.lang.NoClassDefFoundError.
      [convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Stub: unsupported long type constant.
      [convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Stub: unsupported parameter type long of invoked method invoke(java.rmi.Remote, java.lang.reflect.Method, java.lang.Object[], long) of class java.rmi.server.RemoteRef.
      [convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Stub: unsupported long type constant.
      [convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Stub: unsupported parameter type long of invoked method newCall(java.rmi.server.RemoteObject, java.rmi.server.Operation[], int, long) of class java.rmi.server.RemoteRef.
      [convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Stub: unsupported String type constant.
      [convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Stub: unsupported parameter type String of invoked method <init>(java.lang.String, java.lang.Exception) of class java.rmi.MarshalException.
      [convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Stub: unsupported String type constant.
      [convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Stub: unsupported parameter type String of invoked method <init>(java.lang.String, java.lang.Exception) of class java.rmi.UnexpectedException.
      [convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Stub: unsupported long type constant.
      [convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Stub: unsupported parameter type long of invoked method invoke(java.rmi.Remote, java.lang.reflect.Method, java.lang.Object[], long) of class java.rmi.server.RemoteRef.
      [convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Stub: unsupported long type constant.
      [convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Stub: unsupported parameter type long of invoked method newCall(java.rmi.server.RemoteObject, java.rmi.server.Operation[], int, long) of class java.rmi.server.RemoteRef.
      [convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Stub: unsupported String type constant.
      [convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Stub: unsupported parameter type String of invoked method <init>(java.lang.String, java.lang.Exception) of class java.rmi.MarshalException.
      [convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Stub: unsupported String type constant.
      [convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Stub: unsupported parameter type String of invoked method <init>(java.lang.String, java.lang.Exception) of class java.rmi.UnexpectedException.
      [convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Stub: unsupported long type constant.
      [convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Stub: unsupported parameter type long of invoked method invoke(java.rmi.Remote, java.lang.reflect.Method, java.lang.Object[], long) of class java.rmi.server.RemoteRef.
      [convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Stub: unsupported long type constant.
      [convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Stub: unsupported parameter type long of invoked method newCall(java.rmi.server.RemoteObject, java.rmi.server.Operation[], int, long) of class java.rmi.server.RemoteRef.
      [convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Stub: unsupported String type constant.
      [convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Stub: unsupported parameter type String of invoked method <init>(java.lang.String, java.lang.Exception) of class java.rmi.UnmarshalException.
      [convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Stub: unsupported String type constant.
      [convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Stub: unsupported parameter type String of invoked method <init>(java.lang.String, java.lang.Exception) of class java.rmi.UnmarshalException.
      [convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Stub: unsupported String type constant.
      [convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Stub: unsupported parameter type String of invoked method <init>(java.lang.String, java.lang.Exception) of class java.rmi.UnexpectedException.
      [convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Stub: unsupported long type constant.
      [convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Stub: unsupported parameter type long of invoked method invoke(java.rmi.Remote, java.lang.reflect.Method, java.lang.Object[], long) of class java.rmi.server.RemoteRef.
      [convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Stub: unsupported long type constant.
      [convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Stub: unsupported parameter type long of invoked method newCall(java.rmi.server.RemoteObject, java.rmi.server.Operation[], int, long) of class java.rmi.server.RemoteRef.
      [convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Stub: unsupported String type constant.
      [convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Stub: unsupported parameter type String of invoked method <init>(java.lang.String, java.lang.Exception) of class java.rmi.UnmarshalException.
      [convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Stub: unsupported String type constant.
      [convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Stub: unsupported parameter type String of invoked method <init>(java.lang.String, java.lang.Exception) of class java.rmi.UnexpectedException.
      [convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Stub: unsupported long type constant.
      [convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Stub: unsupported parameter type long of invoked method invoke(java.rmi.Remote, java.lang.reflect.Method, java.lang.Object[], long) of class java.rmi.server.RemoteRef.
      [convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Stub: unsupported long type constant.
      [convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Stub: unsupported parameter type long of invoked method newCall(java.rmi.server.RemoteObject, java.rmi.server.Operation[], int, long) of class java.rmi.server.RemoteRef.
      [convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Stub: unsupported String type constant.
      [convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Stub: unsupported parameter type String of invoked method <init>(java.lang.String, java.lang.Exception) of class java.rmi.MarshalException.
      [convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Stub: unsupported String type constant.
      [convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Stub: unsupported parameter type String of invoked method <init>(java.lang.String, java.lang.Exception) of class java.rmi.UnexpectedException.At the first command prompt, I typed cref -o demoee
    and at the next command prompt, I typed ant all, and I got those error messages.
    Thanks, you are so nice to help :)
    Jack

  • How to use Java code signing certificate in oracle 11i

    Hello,
    I am try to configure java code signing certificate in 11.5.10.2 application. we got java sign certificate from verisgin. SA's imported the certificate and created alias XXX_XXX with password and passphrase.
    I am able to see the my certificate. keytool -list -v -keystore xxx_xxxx.jks -storepass Password.
    how do I use it. I am using Enhance Jar Signing for EBS DOC ID 1591073.1.
    could you please give me some advice on it?
    Thanks
    Prince

    Hussien,
    I find out apps keystore keypassword and storepassword, I imported the java code sign certificate. I generated Jar files through adadmin, but I am getting  warning error
    adogif() unable to generate Jar Filers under JAVA_TOP.
    executing /usr/jdk/jdk1.6.0_45/bin/java sun.security.tools.JarSigner keysotre **** -sigfile CUST Signer /apps/......
    Error JarSigner subcommand Exited With status 1.
    No standard output from jarsigner JarSigner error output: Exception in thread "main" java.lang.NoClassDefFoundError: sun/security/tools/JarSigner Caused by: java.lang.ClassNotFoundException: sun.security.tools.JarSigner         at java.net.URLClassLoader$1.run(URLClassLoader.java:202)         at java.security.AccessController.doPrivileged(Native Method)         at java.net.URLClassLoader.findClass(URLClassLoader.java:190)         at java.lang.ClassLoader.loadClass(ClassLoader.java:306)         at sun.misc.Launcher$AppClassLoader.loadClass(Launcher.java:301)         at java.lang.ClassLoader.loadClass(ClassLoader.java:247) Could not find the main class: sun.security.tools.JarSigner.  Program will exit. WARNING: The following path(s), defined in /apps2/property/product/tst/appl/cz/11.5.0/java/make/czjar.dep as elements of the output:   oracle/apps/cz/runtime/tag WARNING: Copying cztag.lst from the old fndlist.jar ...   About to Analyze flmkbn.jar : Fri Nov 22 2013 10:45:51
    Please let me know if you have any idea. Thanks Prince

  • How to use java code in my forms.................

    Hi All,
    I want to use the below java code in my form 6i ..but don't know how????????
    related function is also given below..........
    Any idea .......Please
    Thanks
    Harry.....
    import java.awt.*;
    import javax.swing.*;
    import java.awt.event.*;
    import java.sql.*;
    public class MyProgram {
    private static Connection con = null;
    private static Statement st;
    public static ResultSet rs;
    public static String s;
    /* public void setlable(int n)
    rs = st.executeQuery("SELECT number_to_words("+n+") FROM dual");
    while (rs.next())
    output.setText(rs.getString(1));
    public static void main(String[] args) {
    try
    Class.forName("oracle.jdbc.driver.OracleDriver");
    Connection con = DriverManager.getConnection("jdbc:oracle:thin:@172.19.193.38:1525:ITSTIN", "scott", "tiger");
    st = con.createStatement();
    }catch(Exception exp){
    System.out.println("Error"+exp.toString());
    JFrame f = new JFrame("Conver Digit to Words..");
    JLabel input = new JLabel("Enter Numeric digits :");
    final JLabel output = new JLabel("Please enter value into TestBox.....",JLabel.CENTER);
    final JTextField TF1 = new JTextField(90);
    final JButton B1 = new JButton("Close");
    f.setSize(750, 250);
    f.setLocation(300,200);
    f.setDefaultCloseOperation(JFrame.EXIT_ON_CLOSE);
    Container contentPane = f.getContentPane();
    contentPane.setLayout(null);
    contentPane.setBackground(Color.CYAN);
    TF1.setLocation(300,25);
    TF1.setSize(150,30);
    input.setLocation(175,25);
    input.setSize(150,30);
    input.requestFocus();
    output.setLocation(15,100);
    output.setSize(650,30);
    output.setForeground(Color.RED);
    B1.setSize(100,32);
    B1.setLocation(620,175);
    contentPane.add(TF1);
    contentPane.add(input);
    contentPane.add(output);
    contentPane.add(B1);
    f.setVisible(true);
    B1.addMouseListener(new MouseAdapter(){
    public void mouseClicked(MouseEvent me)
    System.exit(0);
    TF1.addKeyListener(new KeyAdapter(){
    public void keyReleased(KeyEvent event){
    if (TF1.getText().equals("") )
    output.setText("Please enter value into TestBox.....");
    else
    try
    if (TF1.getText().length()<12)
    s = "SELECT initcap(number_to_words("+Long.parseLong(TF1.getText())+")) FROM dual";
    rs = st.executeQuery(s); //Function number_to_words exists in scott@itstin created by AMUY-IN
    while (rs.next())
    output.setText(rs.getString(1));
    }catch(Exception e)
    System.out.println("Error-2"+e.toString());
    ================================function===============
    CREATE OR REPLACE FUNCTION amuy_con_to_eng(nm2 NUMBER) RETURN VARCHAR2 IS
    nm1 NUMBER(10,0) := nm2;
    NM VARCHAR2(100):='';
    div NUMBER;
    BEGIN
    WHILE nm1>0 LOOP
    IF nm1>=20 THEN
    div :=Floor(nm1/10);
    NM := NM||' '||base_convert(div*10);
    nm1:=Mod(nm1,10);
    END IF;
    IF nm1>=1 AND nm1<20 THEN
    NM := NM||' '||base_convert(nm1);
    nm1:=nm1/10;
    END IF;
    nm1 :=Floor(nm1/10);
    END LOOP;
    RETURN NM;
    END;
    CREATE OR REPLACE FUNCTION number_to_words(inm NUMBER) RETURN VARCHAR2 IS
    /* Function that converts number's to word's*/
    /* Created buy amuy-in */
    l_inm NUMBER(35,0);
    NM VARCHAR2(1000):='';
    div NUMBER;
    BEGIN
    l_inm := inm;
    IF inm<=0 THEN
    RETURN 'ZERO';
    ELSE
    WHILE l_inm>0 LOOP
    case when Length(l_inm) >= 1 AND Length(l_inm)<=2
    then RETURN NM||' '||sf_num_to_words(l_inm);
    when Length(l_inm) = 3
    then div :=Floor(l_inm/RPad(1,3,0));
    l_inm := Mod(l_inm,RPad(1,3,0));
    NM :=NM||' '||sf_num_to_words(div)||' '||'HUNDRED';
    when Length(l_inm) >= 4 AND Length(l_inm) <= 5
    then div :=Floor(l_inm/RPad(1,4,0));
    l_inm := Mod(l_inm,RPad(1,4,0));
    NM :=NM||' '||sf_num_to_words(div)||' '||'THOUSAND';
    when Length(l_inm) >= 6 AND Length(l_inm) <= 7
    then div :=Floor(l_inm/RPad(1,6,0));
    l_inm := Mod(l_inm,RPad(1,6,0));
    NM :=NM||' '||sf_num_to_words(div)||' '||'LAKH';
    when Length(l_inm) >= 8 AND Length(l_inm) <= 9
    then div :=Floor(l_inm/RPad(1,8,0));
    l_inm := Mod(l_inm,RPad(1,8,0));
    NM :=NM||' '||sf_num_to_words(div)||' '||'CRORE';
    when Length(l_inm) >= 10 AND Length(l_inm) <= 11
    then div :=Floor(l_inm/RPad(1,10,0));
    l_inm := Mod(l_inm,RPad(1,10,0));
    NM :=NM||' '||sf_num_to_words(div)||' '||'ARAB';
    ELSE RETURN 'ERROR {Length of input value should be <12}';
    END CASE;
    END LOOP;
    RETURN NM ;
    END IF;
    END;
    /

    You cannot use java directly inside forms. You can either create a java-bean to enhance the GUI (as you have some UI-components in your java-code, i guess this would be the direction) or use the java-importer and call server-side-java. Both require that you are running forms in a web-version and not as client-server.
    What exactly is your requirement?

  • How does task flow code know if it is in a WebCenter app

    Hi,
    I'm developing a bunch of bounded task flows, and want to be able to drop them in a regular ADF web application as well as a WebCenter Portal Application.
    If the task flows are dropped in a WebCenter Portal Application, I'd like my code to be able to use some WebCenter API. At the same time, I don't want the code to throw ClassNotFoundException if it doesn't find the WebCenter classes because its in a regular ADF web app.
    What is the best approach to do this? How does my task flow code know if it is in a WebCenter app?
    Thanks.

    Hi Dimitar,
    I guess, the exception case may be valid when it is deployed as a shared application.
    But I have question on this:
    If the application refers any ADF libraries, we specify the entry at weblogic-application.xml
    <weblogic-application xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
    xsi:schemaLocation="http://www.bea.com/ns/weblogic/weblogic-application http://www.bea.com/ns/weblogic/weblogic-application/1.0/weblogic-application.xsd"
    xmlns="http://www.bea.com/ns/weblogic/weblogic-application">
    <listener>
    <listener-class>oracle.adf.share.weblogic.listeners.ADFApplicationLifecycleListener</listener-class>
    </listener>
    <listener>
    <listener-class>oracle.mds.lcm.weblogic.WLLifecycleListener</listener-class>
    </listener>
    *<library-ref>*
    *<library-name>adf.oracle.domain</library-name>*
    *</library-ref>*
    </weblogic-application>
    But do we need to the same, if we are referring any webcenter libraries.
    Is this correct?
    Thanks,
    Navaneeth

  • VC - How does it build code - can code be changed - SOAP

    Hi,
    From my understanding of webservices and VC..
    I have the following questions:(please correct me if i am wrong)
    - How does Visual composer generate code ..get data from
      RFC and display it..
    - Can visual composer respond to a SOAP request..
      if i have to get data from a CRM s/m, BW s/m and R/3 i
      can do it within one view of VC..however if i need to
      similar data by making a SOAP request.. i need to make
      multiple requests to RFCs published as
      webservices..Instead of that can i make a SOAP request
      to VC and get data back..

    That's right, VC is not a tool to build "services", it's a tool to build an "application with UI". On the other hand you can retrieve data from VC by using Portal Eventing and defining input/output for the VC application itself. Tehre is an excellent document which describes a similar scenario for a VC iView with BEx:
    How to Integrate Visual Composer Applications and BEx Web Templates
    https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/ad182ac7-0a01-0010-4fb8-8a4d217b19c1
    Mario

  • How does the Java Gernerics being implemented?

    Generic programming is supported in Java, and I want to know how does this feature being considered and implemented? Any one can give me some introduction or resources link? Thank you.
    Edited by: AaronZhang on Aug 25, 2008 9:37 PM

    Thank you ! But I've gotten this tutorial and actaully want to known the implementation mechanism of java generic.

  • How to call java code in xsl?

    I'm trying to call java code in xsl. I've not been able to do so so far....any help is greatly appreciated.
    Here's my xsl:
    <?xml version="1.0"?>
    <xsl:stylesheet xmlns:xsl="http://www.w3.org/1999/XSL/Transform" version="1.1"
              xmlns:xalan="http://xml.apache.org/xalan"
              xmlns:java="http://xml.apache.org/xalan/java"
              extension-element-prefixes="java">
    <xsl:output method="xml" indent="yes"/>
    <xsl:strip-space elements="*"/>
    <xsl:template match="data_order">
    <order xsl:use-attribute-sets="order-info"></order>
    <fromdate><xsl:value-of select="ds/temporal/ds_start_date"/></fromdate>
    <stringdate><xsl:variable name="stringDate" select="java:ConvertDate2.changeDate(ds_start_date)"/>
    </stringdate>
    <thrudate><xsl:value-of select="ds/temporal/ds_stop_date"/></thrudate>
    <chans><xsl:apply-templates select="ds/subset_spec/channels"/></chans>
    </xsl:template>
    <xsl:attribute-set name="order-info">
    <xsl:attribute name="id"><xsl:value-of select="@job_id"/></xsl:attribute>
    <xsl:attribute name="job"><xsl:value-of select="@origin"/></xsl:attribute>
    </xsl:attribute-set>
    <xsl:template match="channels">
    <xsl:copy use-attribute-sets="sequence">
    <xsl:apply-templates/>
    </xsl:copy>
    </xsl:template>
    <xsl:attribute-set name="sequence">
    <xsl:attribute name="index"><xsl:value-of select="position()"/></xsl:attribute>
    </xsl:attribute-set>
    </xsl:stylesheet>
    And here's my java code
    import java.io.*;
    import java.util.*;
    import java.lang.*;
    public class ConvertDate2
    public static String changeDate(String inputdate)
    String date_array[];
    String combined_date;
    date_array = inputdate.split("[-]");
    combined_date = date_array[0]+ date_array[1]+ date_array[2];
    return combined_date;
    }//end changeDate
    }// end class

    Try Changing your namespace for java to ConvertDate2(This class should be in classpath) and replace
    <stringdate><xsl:variable name="stringDate" select="java:ConvertDate2.changeDate(ds_start_date)"/>
    </stringdate>
    with
    <stringdate><xsl:variable name="stringDate" select="java:changeDate(ds_start_date)"/>
    </stringdate>
    Make sure your query matches with ds_start_date correctly.

  • Guide on how to modify Java code for Syclo

    Hi All,
    I have ZS4SAPSM-3.0.0.0 jar file in Installed Agentry server's Java folder.
    I want to modify some code in Java. I imported that file in Eclipse and modified it and tried to run it. It was calling some JCO client etc.
    Can someone guide me to know the procedure to modify Java code?
    Regards
    -prit
    Tags edited by: Michael Appleby

    How-to Build an Agentry based mobile app from scratch connecting to an SAP back-end Part1
    Pls Read this document. It was very helpful to me to built the app from scratch.
    I think you will understand the idea of Java and it will help to solve you problem.
    If you have more questions pls attach the examples here.

Maybe you are looking for

  • Can't login on iMac to Local Network accounts on server

    I'm a volunteer at the Marjorie P Lee retirement community. We had two iMacs that were available for residents to use. We recently bought two more iMacs and a Mac Mini Server. The goal is to make it possible for residents to use any of the computers

  • Slow startup on G4 Cube

    Startup on my G4 Cube 450mhz running 10.4.11 has become abnormally slow. Once running, I don't find that applications are having any running issues. What hard drive maintenance/procedures are recommended to possibly remedy this issue?

  • PSE9 Runtime Error

    All of a sudden, I can't get the photoshop editor to open.  Can Someone help me?

  • Single or Multiple FM area for multiple company codes ?

    Hi All, I have two company codes assigned with two different chart of accounts and controlling areas. Now i have to implement Funds Management in our company. In this scenario does i need to create single or two FM areas. can any one guide through th

  • HoW-TO web db for LINUX ????

    can we use web db with linux red hat 6.0 and oracle 8 ???? null