How does Grid Control Application Management Pack (AMP) discover targets?

I have Grid Control 10.2.0.4 install and am trying to discover Oracle 11i applications. I have applied the patches required to the OMS and the agents and can see the Application Management tab at the top of the targets page. I am able to discover the individual components of the application (i.e. Apache, listeners, database, agents, hosts, forms, etc) but when I go under the Application Management tab and try to discover the Oracle applications I get the following error message:
Error creating Node target for ctx file /ssan/ap00/appl/admin/ssan_ssan.xml; Error:Refresh EMDClient for
ssan.rtd-denver.com
oracle.apps.fnd.oam.em.sdk.targetData.discovery.AppsTDiscovererPreFusion.discoverTargetsForNode; Waited for five minutes, but unable to find
Targetssan-Forms_ssan_ssan(oracle_apps_forms_svlt) in Reposiotry Possible reason - agent: https://ssan.rtd-denver.com:3872/emd/main/ has not uploaded
this target in repository
I have the following in the ebsDiscovery.log
oracle.apps.fnd.oam.em.sdk.targetData.discovery.AppsTargetsDiscoverer.saveTargetWithAgent - Host=ssan.rtd-denver.com 7 targets Found to be saved.
oracle.apps.fnd.oam.em.sdk.targetData.discovery.AppsTargetsDiscoverer.saveTargetWithAgent - Host=ssan.rtd-denver.com Convert to Target Isnatnce Name = ssan-Forms_ssan_ssan,oracle_apps_forms_svlt
oracle.apps.fnd.oam.em.sdk.targetData.discovery.AppsTargetsDiscoverer.saveTargetWithAgent - Host=ssan.rtd-denver.com Convert to Target Isnatnce Name = ssan-Apache_ssan_ssan,oracle_apps_apache
oracle.apps.fnd.oam.em.sdk.targetData.discovery.AppsTargetsDiscoverer.saveTargetWithAgent - Host=ssan.rtd-denver.com Convert to Target Isnatnce Name = ssan-JServ_ssan_ssan,oracle_apps_jserv
oracle.apps.fnd.oam.em.sdk.targetData.discovery.AppsTargetsDiscoverer.saveTargetWithAgent - Host=ssan.rtd-denver.com Convert to Target Isnatnce Name = ssan-Forms_ssan_ssan,oracle_apps_forms_svlt
oracle.apps.fnd.oam.em.sdk.targetData.discovery.AppsTargetsDiscoverer.saveTargetWithAgent - Host=ssan.rtd-denver.com Convert to Target Isnatnce Name = ssan-Apache_ssan_ssan,oracle_apps_apache
oracle.apps.fnd.oam.em.sdk.targetData.discovery.AppsTargetsDiscoverer.saveTargetWithAgent - Host=ssan.rtd-denver.com Convert to Target Isnatnce Name = ssan-JServ_ssan_ssan,oracle_apps_jserv
oracle.apps.fnd.oam.em.sdk.targetData.discovery.AppsTargetsDiscoverer.saveTargetWithAgent - Host=ssan.rtd-denver.com Convert to Target Isnatnce Name = ssan-Discoverer_ssan_ssan,oracle_apps_discoverer
oracle.apps.fnd.oam.em.sdk.targetData.discovery.ProxyTarget.registerWithEMAgent _methodAccess = 4 Calling lEMDC.saveTarget
oracle.apps.fnd.oam.em.sdk.targetData.discovery.AppsTargetsDiscoverer.saveTargetWithAgent - Host=ssan.rtd-denver.com Out
oracle.apps.fnd.oam.em.sdk.targetData.discovery.AppsTDiscovererPreFusion.discoverTargetsForNode refreshSubsystems for node = ssan-:Infrastructure ssan_ssan:APPL_TOP Context
oracle.apps.fnd.oam.em.sdk.targetData.discovery.AppsTargetsDiscoverer.checkTragteUplodedFromAgent ssan-Forms_ssan_ssan(oracle_apps_forms_svlt) is Uploaded in Rep=false
oracle.apps.fnd.oam.em.sdk.targetData.discovery.AppsTargetsDiscoverer.checkTragteUplodedFromAgent Waiting for target ssan-Forms_ssan_ssan(oracle_apps_forms_svlt) to be uploaded in repository. (wait itme 10 sec)
I have the white paper explaining how Grid Control discovers databases, listeners, application servers, etc. But I am not able to find a paper that tells how the Application Manager discovers the Oracle applications. Does anyone know of such a paper or which perl scripts are run?

One of the biggest problems I have run into when doing these discoveries is that the agent and iAS and/or Oracle are owned by different users and the agent does not have permissions to read the configuration files.
You situation may be a bit different.
If the host is real busy, it sometimes takes a long time to load the gathered information into the repository. From looking at your log file, this may be your issue.
How busy is the server(s) and database for you OMS and OEM database?

Similar Messages

Oracle Application Management Pack(AMP) for Oracle E-Business Suite

1. How to find the (already) installed OEM version ?
2. How to find if AMP is installed and what version ??
3. If not installed,Metalink Doc id to install and upgrade AMP to latest version ??
Hi,
I am new to EBS , please help me in these questions
Thanks in advance.

Please see this thread for similar discussion -- Applications Management Pack for 11i
Thanks,
Hussein

EM10gR2 Grid Control / Change Management Pack does not support TYPE objects

I wonder any Oracle EM10gR2 Grid Control users, implementing Oracle Change Management Pack, have used it for the release and proper packages management.
Issue1 - On an EM console / Web GUI the DDL comparison and synchronization is not supported at all. Implementing it @ customer it appeared that we have to install a 10g Java Client in order to use the code comparison and sync functionalities.
Issue2 - and this is more serious - it appears that even with Java client in use, you cannot compare or sync objects related to TYPE or TYPE BODY data types. The comparison simply hangs.
Asked help from support, they mentioned an ER from 8i and logged a new ER for 10g/11g. That is surprising especially as the doc (http://download.oracle.com/docs/html/A96679_01/toc.htm) about code comparison does not exclude the TYPE objects from the supported options.
Any fellow DBA running to a same problem? What solutions & recommendations might you have?

Hi Mugunthan,
Can you provide links to any tutorial or example (screenshots) of using Setup Manager to transfer something between two environments (say Users or DFFs)?
Thanks,
Gareth

How does one force Application Manager to do a re-install?

I uninstalled Acrobat X to try and resolve some issues with plugins, but Adobe Application Manager insists it's already installed and won't let me download or attempt to re-install it again..
Can one force a re-install of an already installed application? Or at least persaude AAM to re-evaluate what is and what isn't installed? After all, I used it to install these apps - it should have some idea of what's what..

http://helpx.adobe.com/creative-cloud/kb/cant-install-acrobat-aam.html
.. did resolve my situation (there are occasions when my brain just melts and I can't digest what the heck I'm reading. Sigh. Apologies for wasted bandwidth.

Applications Management Pack 3.0 now available

E-Business Suite Applications Technology Group recently released a new version of the Application Management Pack (AMP).
Application Management Pack extends Enterprise Manager Grid Control to monitor and managed E-Business Suite components. Notable new features in Version 3.0 are:
Advanced Discovery: allows you to monitor and manage E-Business Suite systems running advanced topologies such as Real Application Clusters (RAC)
EBS Administration: provides a user interface to start or stop E-Business Suite components individually or the E-Business Suite as a whole
Hot cloning for Oracle E-Business Suite Release 12: Automates cloning of an Oracle E-Business Suite Release 12 system in hot mode, without shutting down the database.
RAC cloning for Oracle E-Business Suite Release 12: Enables cloning of Oracle E-Business Suite Release 12 databases running Real Application Clusters to another RAC or single-node (non-RAC) environment.
Licencing
Application Management Pack for Oracle E-Business Suite is a licensed product.
Downloads
The Application Management Pack and Application Change Management Pack are available as a single install using Oracle Universal Installer. They can be downloaded via:
[Application Management Pack and Application Change Management Pack for Oracle E-Business Suite Version 3.0 (Patch 8333939)|http://updates.oracle.com/ARULink/PatchSearch/process_form?bug=8333939#uage=0&process=Submit]
References
[Getting Started with Oracle Application Management Pack and Application Change Management Pack for Oracle E-Business Suite Version 3.0 (Metalink Note 812315.1)|https://metalink.oracle.com/metalink/plsql/showdoc?db=NOT&id=812315.1]
[Oracle Enterprise Manager Application Change Management Pack for Oracle E-Business Suite (PDF, 260K)|http://www.oracle.com/technology/products/oem/pdf/ds_appl_chg_mgmt.pdf]
[Application Management Pack for Oracle E-Business Suite Data Sheet (PDF, 80K)|http://blogs.oracle.com/stevenChan/2009/06/www.oracle.com/technology/products/oem/pdf/apps_mgmt_ebiz.pdf]
Related Articles
[Comparing OEM Data Masking and AMP Data Scrambling Features|http://blogs.oracle.com/stevenChan/2008/04/comparing_oem_data_masking_and.html]
[Certified Oracle RAC Scenarios for Oracle E-Business Suite Cloning|http://blogs.oracle.com/stevenChan/2009/03/certified_rac_scenarios_for_ebs_cloning.html]

There are many enhancements in Setup Manager compared to iSetup. To list a few:
1) ability to create a project which groups extracts, loads and reports and orchestrate these tasks as per your requirements.
2) Ability to migrate data between point releases of EBS. Example, you can move data from 12.0.4 to 12.0.6 or 12.1.1.
3) Ability to share the projects with other users.
4) You can do extraction and loading to multiple instances in a single execution.

Oracle Grid Control and Oracle Application Management Pack for Siebel

I am trying to get the Oracle Grid Control Software to work with the Siebel Application Management Pack so that I can effectively monitor Siebel. The client I am at does not have a budget for proper monitoring solution therefore, I have chosen the free alternative. Anyway, the Oracle 10G Agent is running on all the windows Siebel Servers and all of the Siebel Servers appear within the Oracle Grid Control management tool. At this time I am more interested in monitoring the Siebel metrics versus the windows metrics.. I have added Siebel as a Target Subtab within Oracle Grid Control. I have also successfully run through the Oracle Agent 10G SiebelClassPathfix.bat command on each Siebel Windows Server. What I am not able to do is add a Siebel Enterprise through the Oracle Grid Control Manager Software. When I attempt to add a Siebel Enterprise I receive the following error message. Any suggestions would be beneficial.
An error occured while adding Siebel Enterprise.
Credentials - Missing Credentials for host halcrmtgw01.dinghy.hal.test

Please log a service request with tech support so that we can track this inquiry. On the service request, capture a screenshot of the page where you defined the host preferred credentials, and tell us the names of your servers.
Btw, I take that you are stuck in the step in which you:
- Click the "Add Enterprise" button to add the enterprise
- Fill in the 7 parameters
- Click Ok to start the discovery process
Which release of Siebel and Enterprise Manager are you using?
Chung

Does Application Management Pack (for E-Business) need a separate license?

Hi, I am licensed for Oracle Enterprise Manager 11g Release 1 Grid Control 11.1.0.1.0.
Now I want to add Application Management Pack for E-Business R11i and R12. Do I need to purchase a new license?
From my existing installation there is a link About OEM -> ... License Information; I don't see any entry for E-Business Suite management.
Thanks,

Yes, you need to license Application Management Suite for E-Business Suite to cover the EBS management functionality. In both EM 11g and EM 12c, you need to download the plug-in for EBS. In the case of EM 12c, you can simply use the self-update feature to quickly get the EBS plug-in. For 11g, you will have to get it via e-Delivery.
Here is the OTN home page for packaged application management where you can find details and self-running demos of the EBS management functionality:
http://www.oracle.com/technetwork/oem/app-mgmt/index.html

Any patch for OEM 10.2.0.5 for OARCLE application management pack??

We already have ORACLE Grid Control 10.2.0.5 (X86 version) on Linux server. We plan to install ORACLE Application Management Pack 3.0 into Grid Control 10.2.0.5.
I heard there have patch need apply to Grid Control 10.20.05 before install Application management pack into it. Anyone know which patch?
Thanks.

I follow document 812315.1 and OAM installation gudie to install OAM 3.0 plug-in to OEM 10.2.0.5. Everything look fine on OEM server. I also follow 812315.1 and tried to install patchs on EBS R12.1 application server:
3. Apply the following patches for Release 12.1 or higher
Apply AD Patch 8414326: R12.AD.B:1OFF:12.1: INTEROPERABILITY PATCH FOR AMP-ACP 3.0
Apply Interoperability Patch 7616161: R12.OAM.B 12.1 INTEROPERABILITY PATCH FOR AMP 3.0
On R12.1 application server, I installed patch 8414326 and without problem. But when I tried to install patch 7616161 and I got error:
AutoPatch error:
This patch is not compatible with your current codelines.
This patch is compatible with: entity 'oam' - codeline 'R12.OAM.A'.
Your current on-site codeline for the entity 'oam' is: 'R12.OAM.B'.
You should not apply this patch.
Apply an equivalent patch that is compatible with your
current codelines instead.
any ideal????

Note: 982302.1 -Oracle Application Management Pack

Hi dear,
I am just confused with lots of docs :( I want to use the best one.
Is note 982302.1 the same as 568069.1
referred to as
>Oracle E-Business Suite Release Management Packs 3.1 (AMP-ACP 3.1) (Patch 8333939)
also referred to as
> AMP ( Application Management Plugin) installed for monitoring E-Business applications.This has to be applied on OMS and agents to monitor applications.
Thanks a lot,
Ms K

Hi Ms K,
I would start with note 982302.1 and use 568069.1 if you have discovery problems. The latter note is a little old, so may not still be applicable for the latest release of the Applications Management Pack.
I also recommend searching for "AMP 3.1" on My Oracle Support to see what additional issues are present. If you are using 11gR1 or 11gR2 database with EBS, I recommend installing 11gR1 Grid Control and wait for the 11g certified Applications Management Pack. I have not used AMP 3.1, but had problems with 2.0 and 3.0 keeping services showing "Up" in Grid Control 10.2.0.5. It would work for a few weeks then mostly show pending or down after that. I eventually lost interest in fighting with it as I was the primary user that looked at it anyway.
Regards,
-Michael

Oracle Application Management Pack for Siebel

Does anyone on this board have any experience with the Oracle 10G Grid Control software and the Oracle Application Management Pack for Siebel. The installation of the Oracle Enterprise Manager Grid Control with the Siebel Management Pack has been successful on the Windows 2003 servers and we can view a list of the servers within Oracle's OEM tool. The problem I am facing is when I try to add a Siebel Enterprise. I receive the following error when I attempt to add a Siebel Enterprise.
An error occured while adding Siebel Enterprise.
Credentials - Missing Credentials for host <HOST_NAME>
All of the credentials have been added properly. Does anyone have any experience or success using this product? If so please reply with feedback.
.

Please log a service request with tech support so that we can track this inquiry. On the service request, capture a screenshot of the page where you defined the host preferred credentials, and tell us the names of your servers.
Btw, I take that you are stuck in the step in which you:
- Click the "Add Enterprise" button to add the enterprise
- Fill in the 7 parameters
- Click Ok to start the discovery process
Which release of Siebel and Enterprise Manager are you using?
Chung

Installation of Application Management Pack 3 Failed

Hi All,
Please help me.
I've experienced an error while installing the Application Management Pack 3 on Linux Machine (OS: Oracle Enterprise Linux 5.3 32-bit) with EM Grid Control 10g Release 5. I want to install the Grid Control Plug-in Oracle E-Business Suite Management Pack 3 to manage our EBS Oracle Apps R12, but it was failed due to error. Below was the logs for error:
Log: /u01/app/oraInventory/logs/installActions2010-07-06_03-00-11PM.log
RepManager was not able to run successfully.
/applications/em/em/WEB-INF/lib/myjar.jar:/u01/app/oracle/OracleHomes/oms10g/sysman/jlib/emCfg.jar:/u01/a
pp/oracle/OracleHomes/oms10g/jlib/ojmisc.jar:/u01/app/oracle/OracleHomes/oms10g/sysman/jlib/emUpgrade.jar
:/u01/app/oracle/OracleHomes/oms10g/sysman/jlib/emagentSDK.jar oracle.apps.oms_extn.util.EBSOUIUtil RepMa
nager /u01/app/oracle/OracleHomes/oms10g ${s_encrreposDBAPwd} (DESCRIPTION=(ADDRESS_LIST=(ADDRESS=(PROTOC
OL=TCP)(HOST=oem.kccmalls.com)(PORT=1521)))(CONNECT_DATA=(SERVICE_NAME=emrep.kccmalls.com)))
/u01/app/oracle/OracleHomes/oms10g/sysman/admin/emdrep/bin/RepManager -connect (DESCRIPTION=(ADDRESS_LIST
=(ADDRESS=(PROTOCOL=TCP)(HOST=oem.kccmalls.com)(PORT=1521)))(CONNECT_DATA=(SERVICE_NAME=emrep.kccmalls.co
m))) -sys_password **** -repos_user sysman -repos_password ******** -action upgrade -verbose
RepManager was not able to run successfully.
Please see /u01/app/oracle/OracleHomes/oms10g/cfgtoollogs/appsemca-2010-7-6_15-558.out for more details.
Execution of the plugin was aborted
INFO: Configuration assistant "APPS plugin Repository Upgrade Assistant" was canceled.
INFO: The "/u01/app/oracle/OracleHomes/oms10g/cfgtoollogs/configToolFailedCommands" script contains all c
ommands that failed, were skipped or were cancelled. This file may be used to run these configuration ass
istants outside of OUI. Note that you may have to update this script with passwords (if any) before execu
ting the same.
INFO: Created a new file /u01/app/oracle/OracleHomes/oms10g/cfgtoollogs/configToolFailedCommands
INFO: Since the option is to overwrite the existing /u01/app/oracle/OracleHomes/oms10g/cfgtoollogs/config
ToolFailedCommands file, backing it up
INFO: The backed up file name is /u01/app/oracle/OracleHomes/oms10g/cfgtoollogs/configToolFailedCommands.
bak
SEVERE: OUI-25031:Some of the configuration assistants failed. It is strongly recommended that you retry
the configuration assistants at this time. Not successfully running any "Recommended" assistants means yo
ur system will not be correctly configured.
1. Check the Details panel on the Configuration Assistant Screen to see the errors resulting in the failu
res.
2. Fix the errors causing these failures.
3. Select the failed assistants and click the 'Retry' button to retry them.
INFO: User Selected: Yes/OK
Log: /u01/app/oracle/OracleHomes/oms10g/cfgtoollogs/appsemca-2010-7-6_15-558.out
Getting temporary tablespace from database...
Found temporary tablespace: TEMP
Environment :
ORACLE HOME = /u01/app/oracle/OracleHomes/oms10g
REPOSITORY HOME = /u01/app/oracle/OracleHomes/oms10g
SQLPLUS = /u01/app/oracle/OracleHomes/oms10g/bin/sqlplus
SQL SCRIPT ROOT = /u01/app/oracle/OracleHomes/oms10g/sysman/admin/emdrep/sql
EXPORT = /u01/app/oracle/OracleHomes/oms10g/bin/exp
IMPORT = /u01/app/oracle/OracleHomes/oms10g/bin/imp
LOADJAVA = /u01/app/oracle/OracleHomes/oms10g/bin/loadjava
JAR FILE ROOT = /u01/app/oracle/OracleHomes/oms10g/sysman/admin/emdrep/lib
JOB TYPES ROOT = /u01/app/oracle/OracleHomes/oms10g/sysman/admin/emdrep/bin
Arguments :
Connect String = (DESCRIPTION=(ADDRESS_LIST=(ADDRESS=(PROTOCOL=TCP)(HOST=oem.kccmalls.com)(PORT=152
1)))(CONNECT_DATA=(SERVICE_NAME=emrep.kccmalls.com)))
Action = upgrade
Repos User = SYSMAN
Default tablespace = MGMT_TABLESPACE
Default Data file = mgmt.dbf
Dflt Dfile Init size = 20m
Dflt Dfile Ext size = 20m
ECM tablespace = MGMT_ECM_DEPOT_TS
ECM Data file = mgmt_ecm_depot1.dbf
ECM Dfile Init size = 100m
ECM Dfile Ext size = 100m
ECM CSA tablespace = MGMT_TABLESPACE
ECM CSA Data file = mgmt_ecm_csa1.dbf
ECM CSA Dfile Init size = 100m
ECM CSA Dfile Ext size = 100m
TEMP tablespace = TEMP
Create options = 3
Verbose output = 1
Output File = /u01/app/oracle/OracleHomes/oms10g/sysman/log/emrepmgr.log.10108
Repos creation mode = CENTRAL
MyOracleSupport user name = NOTAVAILABLE_
MyOracleSupport URL = http://updates.oracle.com
Export Directory = /u01/app/oracle/OracleHomes/oms10g/sysman/log
Import Directory = /u01/app/oracle/OracleHomes/oms10g/sysman/log
Path Separator = :
Checking SYS Credentials ... rem error switch
ECM CSA Dfile Init size = 100m
ECM CSA Dfile Ext size = 100m
TEMP tablespace = TEMP
Create options = 3
Verbose output = 1
Output File = /u01/app/oracle/OracleHomes/oms10g/sysman/log/emrepmgr.log.10108
Repos creation mode = CENTRAL
MyOracleSupport user name = NOTAVAILABLE_
MyOracleSupport URL = http://updates.oracle.com
Export Directory = /u01/app/oracle/OracleHomes/oms10g/sysman/log
Import Directory = /u01/app/oracle/OracleHomes/oms10g/sysman/log
Path Separator = :
Checking SYS Credentials ... rem error switch
Return code = 0.OK.
rem error switch
Upgrading the repository..
Checking for Repos User ... Return code = 0.Exists.
Verifying Audit Master Table --> Passed
Verifying Time Coefficient Table --> Didn't Pass
Verifying SYSMAN Referential Integrity --> Passed
Verifying SYSMAN Trigger Check --> Passed
Verifying Max Enabled Roles --> Passed
Verifying Global User Context --> Passed
Verifying Exempt Access Policy --> Passed
Verifying SYSMAN Queue Tables Check --> Passed
Verifying VPD Basic Policy Function --> Passed
Verifying VPD Valid Policy Function --> Passed
------------- SANITY VIOLATION ----------------
Verification has not passed for schema upgrade
to ensure basic sanity conditions of the SYSMAN schema.
There are the following violations:
Schema Sanity Violation: Time Coefficient Table is expected 1 row but contains 0 row
Please contact Oracle Support for schema validations
before attempting to perform schema upgrade
Any help much appreciated.
Regards,
Cyrus

Take a look at: APPS Plugin Repository Upgrade fails with "Schema Sanity Violation: Time Coefficient Table is expected 1 row but contains 0 row" [ID 883703.1]
on support.oracle.com
https://support.oracle.com/CSP/ui/flash.html#tab=KBHome%28page=KBHome&id=%28%29%29,%28page=KBNavigator&id=%28bmDocTitle=APPS%20Plugin%20Repository%20Upgrade%20fails%20with%20%22Schema%20Sanity%20Violation:%20Time%20Coefficient%20Table%20is%20expected%201%20row%20but%20contains%200%20row%22&bmDocDsrc=KB&bmDocType=PROBLEM&bmDocID=883703.1&viewingMode=1143&from=BOOKMARK%29%29
Regards
Rob
http://oemgc.wordpress.com

Installing Grid Control and managing DBs on desktop

I want to install Grid Control, and manage DB on my own testing environment on desktops...I tried one time to install Grid Control on my desktop i become very slow. Now i am thinking to buy new Desktop dedicated for Grid Control only and see how it goes...any suggestions?
2nd how i can access my DB on the other desktop? Like i should install agents on that...and how to configure....

When teaching this class I typically have 6 pairs of students sharing a single P4 3Ghz with 4Gb of RAM gridserver. (combined 10.1.0.4 emrep with single OMS on RH 3 AS)
THis is more than enough for the 150 or so targets that we configure during class
The agents are deployed in any of several methods.(the install DVD is probabally the easiest for 1's and 2's) If you are monitoring a db expect to use about 150Mb of RAM for the agent. After setting up the agent ensure that your computer has local security policy configured so that "Login as Batch" is enabled for the user account that will be used for authentication to the desktop. (this also means that you need to have a windows password configured for that account as well).
The database configuration is semi-automatic once you have the agent installed on the desktop (it's called discovery)

How to install Adobe Application Manager?

How to install Adobe Application Manager? I downloaded it, but can't install.
Just purchased the CC for photographers. Have been using Photoshop since version 3.
I have been studying your support docs for several days and have no business messing around with something called, .gz files and installation logs. Totally unsuccessful "Updating" my CS6 or CS6 bridge or Extension Manager or the Adobe Support Advisor by the CC Desktop.
Have no Photoshop CS6 because I followed your CC support instructions.
Uninstalled my CS6 today so I can finish a job tomorrow. Bad decision on my part because I can't reinstall it and am unable to correct
this problem.
I was able to use CC to update LR, but am absolutely too afraid to touch it now.
I have been waiting inline for Chat also, but the numbers ahead of me are going up.
If someone in this Community forum can help me, it would be fabulous.
Thanks very much.

Uninstalled Creative Cloud.
Downloaded it again - 4th time.
Deleted a AAMDetect file from the Library/Internet Plug-ins
Downloaded and installed Adobe App Manager and an icon for it is on my Desktop
Installed Creative Cloud.
OK.
Now how do get my Photoshop CS6 back before I download Photoshop CC?
CS6 is not listed in the available Apps in the CC Desktop.
Support wait time right now is 2 hours by phone.
After sitting on Chat yesterday only to see the people "waiting ahead of me" go from 17 to 18, I gave up.
Please advise.
Thanks again.

How do I get Application Manager to recognize that Photoshop is not installed?

Application Manager says that Photoshop CS6 is installed. It isn't. I've rebooted the Mac and it still says it's installed. What installed was a partial or corrupt file which I have trashed. How do I get Application Manager to recognize that Photoshop is not installed so I can download and install it again? Thanks.

Do you have an uninstaller available to you in the Applications/Utilities/Adobe Installers folder? If so then please run the uninstaller.
If you don't then please utilize the uninstallers available in this folder to remove all currently installed Adobe Creative Software. You will then want to follow this by running the CS Cleaner tool. You can find details on the use of the CS Cleaner tool at CS Cleaner Tool for installation problems | CCM, CS6, CS5.5, CS5, CS4, CS3 - http://helpx.adobe.com/creative-suite/kb/cs5-cleaner-tool-installation-problems.html.

How does the Passbook application work? How am I able to import my plane ticket, concert ticket etc into Passbook?

How does the Passbook application work? How am I able to import my plane ticket, concert ticket etc into Passbook?

Try the following to fix the iTunes Can't Connect issue that you are having:
Open Settings.
Open General.
Open Date & Time.
Switch the Set Automatically setting to Off.
Open Set Date & Time.
Set the date to a year ahead.
Go back to the Home screen and open Passbook.
Tap the App Store button. The App Store should load.
Go back to Date & Time and turn on Set Automatically.
Thanks to: https://discussions.apple.com/message/19622208#19622208

How does Grid Control Application Management Pack (AMP) discover targets?

Similar Messages

Maybe you are looking for