How does the adapter specific parameters gets filled up?

Hello,
How do I check adapter specific parameters?
like, I am making the Soap action parameter to dynamically fill in the receiver soap adapter.
I want to check if the correct (one of the 4 actions) action was filled in action field
how do I check?
thanks
nikhil.

Hi,
You need to test the scenario from RWB testing to get the proper results about the dynamic settings for adapter specific parameters.
Refer
Accessing Adapter-Specific Attributes through User Defined Function
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/70c89607-e4d9-2910-7280-f6746e964516
Dynamic Configuration of Some Communication Channel Parameters using Message Mapping
/people/william.li/blog/2006/04/18/dynamic-configuration-of-some-communication-channel-parameters-using-message-mapping
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/70c89607-e4d9-2910-7280-f6746e964516
Re: Adapter-Specific Message Attributes
setting adapter specific message attributes
Thanks
Swarup

Similar Messages

How does 0SOURSYSTEM Souce system Id get filled?

Hi Gang,
How does 0SOURSYSTEM Souce system Id get filled?
I'm trying to recreate some transfer rules which were deleted.
Is there an ABAP program or transfer program to populate this field?
Or do I hard code a value?
Thanks,
John Hawk

Hi,
Yes you need to write code..
INCLUDE rsbctbbp_transfer_r3.
TABLES: srm_proj_contr.
DATA:   l_s_errorlog TYPE rssm_s_errorlog_int,
          l_text TYPE string.
Retrieve source system ID form the source system
CALL FUNCTION 'RSDG_ID_GET_FROM_LOGSYS'
        EXPORTING
          I_SOURCE_SYSTEM = TRAN_STRUCTURE-ORGLOGSY
        IMPORTING
          E_SOURSYSID     = RESULT
        EXCEPTIONS
          ID_NOT_FOUND    = 1.
      IF SY-SUBRC <> 0.
        RETURNCODE = 4.
        message E087(R7) with TRAN_STRUCTURE-ORGLOGSY into l_text.
        move-corresponding syst to l_s_errorlog.
        l_s_errorlog-record = RECORD_NO.
        append l_s_errorlog to g_t_errorlog.
      ENDIF.
    ELSE.
      RESULT = SPACE.
    ENDIF.
ENDIF.
See
Problem with mapping 0SOURSYSTEM and 0LOGSYS in BI7.
Thanks
Reddy

How does the Logical System GUID get created

In R3 table CRMPRLS has a logical GUID for its logical system name. How does this get created/updated? Is it created during the initial replication of the data between R3 and CRM? Why I am wondering is my systems where working ok in my QA environment then something happen to change LSGUID in my CRMPRLS table on R3. So now my middleware is not working. I will use notes 588701 and 765018 to fix the problem, but I am trying figure out what caused it before it happens again in my production environment.
We are doing one thing to mention is that our R3 environment is being setup to talk to 2 different CRMs. I am wondering if the setup of the second CRM caused the guid to change. If so what step during the middleware setup of CRM would cause that?
Thanks.
Matthew

HI Matthew,
We are facing a similar issue. Could you please let us know the activities done to get the issue resolved?
Did you revert back the changes done as suggested in the Note 588701, if yes can you let me know where the changes has been done and how has it is reverted back?
Also, in the table CRMPRLS in R/3 we do not see an entry for the external SRM system.
Please note, for replicating material into SRM we use the CRM Middleware.
BR// 420

How does the software updates actually get installed?

Hello,
Yesterday I followed the steps to perform "To manually deploy the software updates in a software update group" or
https://technet.microsoft.com/en-us/library/gg712304.aspx. or pages 12-15. In a nutshell, I created a Critical Update item with a collection of 3 servers. When I look
at the Software Update Group area that lists the members that I created, I do see under the tabs that Deployed=Yes and Download=Yes for the items that I created. However, this was not installed on any of the servers. How does
this actually get installed on the collection servers? Did I miss a step? Do the client settings play a role here? Please advise.
Thanks for all the help!
Reez

Kind of. Yes a software update scan cycle must run (a deployment eval doesn't), but it doesn't wait until the 7 day interval. Simply creating a new deployment in the console will trigger a software update scan cycle on targeted clients:
http://blog.configmgrftw.com/notes-software-update-scan-cycle/
For your deployment, did you create a "Required" deployment?
Have you reviewed software center on the targeted clients?
Have you check wuahandler.log on the clients.
Jason | http://blog.configmgrftw.com | @jasonsandys

Why does the adapter/recharger plug get so hot?

When we recharge the iPad2, the adapter plug gets very hot, even if the iPad is turned off. I always plug it into a surge protector, but it concerns me...
is this normal?

Yes, it is perfectly normal for power adapters (including the iPad included 10W adapter) to get considerably warm
(to the point where you would not want to hold your hand on it for an extended period of time). I've had my fair share of power adapters over the years, and it seems the lower-end PC ones tend to get extremely hot (where you would not want to hold them in your hand for an extended period of time), but never to the point where it would be unbearable to hold in my hand.
If, indeed, it is too hot to hold or touch, then please make sure it has proper ventilation. Make sure it is not covered by a blanket or sheet, make sure it is not in a cramped corner, etc. If the overheating issue continues, assuming your device is under warranty, take the power adapter to Apple.
As far as this being a concern about like burning down your house, it will certainly not get to that point. More than likely, the worst that could happen is the power adapter overheats and dies, but please again check to make sure the power adapter is plugged in right, and has proper ventilation . . . two very important things.

When and how does the message context get removed from the message when we use pass thru send port

Friends,
i have a doubt regarding message context.
Assume i have used XMLRecieve pipeline in the receive side to receive the message so that the message context is created. I.e properties are promoted/written.
now if we use pass thru transmit pipe line at send side, how and when does the message context get removed from the message?? Since pass thru does not have any stages/components, how does the message context removed and sent out a pure message to destination???
i mean what exactly happens here to remove the context??
Ravindar

Thanks for the reply.
"The Context is created by the Adapter, regardless of any Pipeline or Pipeline Component. It has nothing to do with PassThrough vs. XmlReceive, although XmlReceive will write Promoted Properties to the existing Context,
as can any other Component."
yeah yeah, adapter does create some properties in context. You are right, i am aware of it. I just missed to explain it clearly. what i meant is addition of context properties will not happen if pass thru used. Thanks its clear.
"No. The Context already exists on the Message when it comes from the MessageBox and
is equally available to any Component in any Stage. The Context that hits the Pipeline is whatever was last Persisted, either by a Receive Port or Orchestration. It is not created by the XmlAssembler (XmlTransmit)"
You are right , the context already exists on the message while it leaves the receive port, and once it persists
to message box the context and message context gets stored in messages in relative tables.
Now as you said the components get the message from the last persistence, assume i have a send port(with passthru)
subscriber and a orchestration subsrciber for this message.
Orchestration gets the message with context right!!
if the send sendport(with passthru) also gets message along with context, then where is this context removed/demoted
while sending it out?. i guess as per SAAkhlaq said,
here sendport(with passthru) should get a pure message without context as passthru used.
or is it that ultimately send adapter removes the context completely?
or is it something like biztalk run time load the context from database into cache and both orchestration and send port gets pure message, and if needed they use context from cache???
sorry i may be troubling you, but i am confused. i hope i am not creating any nuisance with this
post.
Ravindar

How do I connect my Mac Book Pro to a projector I have the adapter but cant get anything on the screen

How do I connect my Mac Book Pro to a projector I have the adapter but cant get anything on the screen

Go to your "screen settings". then chose "find screen" then you vill find the prosjector.
this will probably fix your problem.
if this dont works can it be something wrong with your adapter.
hope it helps

How does the field CCSOFTLOCK in T000 Table get Updated ?

Hello Experts !
I would like to know how does the field CCSOFTLOCK in Table T000 Get updated ?
I tried all fields in SCC4 for a client but none of my change updates CCSOFTLOCK .
The Data Element Description says   Client control: Soft Lock Required (Planned for 4.0)
What does this Planned for 4.0 Indicate. We are in ECC5.0.System.
Regards,
Mithun Shetty

Hi Mithun,
Can you check if Note "1047952 - SCC4: Client settings with enhanced security options "is applied to your system.
as per it , you can put additional restrtictions for modifying SCC4 (table T000) fields ,a BadI will be checked additionally.
15. Parameter : CCCOPYLOCK_VAL_DEFAULT
       Type      : Exporting
       Pass Value : Check
       Optional : Space
       Associated type: TYPE
       Reference Type : CCSOFTLOCK
Regards,

How does the MDKP table gets updates

Dear PP Guru's,
I am new to SAP PP,
We have a query that how does the MDKP table gets updates,
Some time If we create new material by coping the material which is showing in table MDKP,
But new material is not showing in table MDKP,
Based on table MDKP we are fetching some data, due to above problem we are not able to fetch the data for some materials,
Please suggest what could be the reason,
Any help will be highly appreciated,
Thanks in advance,
Sachin.

Thanks Thaila,
I have checked the same by doing MRP through MD02 & the entry is getting update in MDKP,
But for some of our materials MRP (MD02) is done earlier, but these materials are not showing in MDKP,
Please suggest, when the entries in MDKP are removed, are there any conditions for removing the entries from MDKP.
please pour some light on the issue,
Thanks once again,
Sachin.

How does the value filled in Appointment Date field reflect in IE_SHIPMENTSTATUS table?

Hi Team,
Just wanted to know : How does the value filled in Appointment Date field reflect in IE_SHIPMENTSTATUS table in OTM.
Please help.
Regards,
John

Sorry, wrong forum: created in ABAP forum instead.

How does JDBC adapter reads or writes the data to DB

Hi All,
How does JDBC adapter read the data from a db, is it that it collects all the data in one go and sends to XI, or is it record by record. And what if it writes to a db?
Xier

Hi,
It collects all record at one time and while writing to DB you can push all data at one go...
We are using receiver JDBC adapter to push data to DB and its one go..
Nilesh

How long does the process take to get a nano repaired or replaced?

how long does the process take to get a nano repaired or replaced?
Windows XP

Usually just a few days... they very seldom (if ever) repair them. You'll usually get either a new or refurbished replacement.

How does the field ABGRU-Reason for Rejection get populated in routines

Hi All,
How does the field ABGRU-Reason for Rejection get populated in routines(VOFM)?
BELNR,KPOSN,etc...fields are populated through KOMK and KOMP structures, similar way what structure is used for ABGRU?
by the time the control from VA01 comes to routine the values of VBAK and VBAP are cleared, so these structures like KOMP and KOMK are used.
Thanks in advance.

You need to add rejection reason field ABGRU as a new field to pricing field catalog (KOMG structure) through APPEND structure KOMPAZ. KOMG inherits new fields from KOMKAZ (for header level fields) or KOMPAZ (for item level fields) structures and it is not directly modified but through KOMKAZ and KOMPAZ structures
Since VBAP-ABGRU can vary from item to item, add it to item pricing communication structure KOMPAZ in SE11. Once KOMPAZ is added with new ABGRU field and activated it will automatically appear in pricing field catalog (KOMG)
Afterwards the ABGRU field will then start to appear in the field catalog where you can create condition table (V/03) including the ABGRU as a field. Once done the rest is assigning the condition table to access sequence which is in turn assigned to the relevant condition type that you want to price based on partner function (all under IMG -> SD -> Basic functions -> Pricing -> Pricing control)
In the pricing user exit userexit_pricing_prepare_tkomp in include MV45AFZZ, you will need a few lines of coding to fetch VBAP-ABGRU for the item and pass it to tkomp-abrug field. This will then be used by system to read the new condition table that you created.
tkomp-abgru= xvbap-abgru
So if you populate special pricing based on ABGRU (with possibly other conditions) in the condition table then that condition record will be read for the corresponding condition type.
You would of course need a developer to modify KOMPAZ structure and code the user exit for moving the rejection reason to tkomp
That is in short how you can achieve this

How does the GR get into SUS---MM-SUS Sceanario

Hi all,
How does the GR get into SUS---MM-SUS Sceanario. Can anyone explain??
Thanks in Advance..
Regards,
Jagan

Hi,
In SUS - MM scenario
The supplier ships the goods and sends an ASN based on PO or an Scheduling Agreement to the purchaser. If ASN is based on PO then PO Response has to be accepted by the purchaser. When the ASN is sent from the SUS system, an inbound delivery is created automatically in SAP MM.
Now Create GR with reference to ASN or PO based on your requirement in R/3 - MM. The GR notification is then sent to the SUS system, where the supplier can display it.
Please reward points for helpful answers

How does the attribute gets the data from R/3 field?

Hi Experts,
It could be silly Q. IO has attributes x, y, z....... When we map r/3 field to IO, and it is added to the cube and when we create a report, how does the attribute gets data? I've been working in BW and suddenly I got confused. Someone please provide me some info
Thanks,
Radha

X,Y,Z being attributes of an info object A.
When A gets loaded it will be loaded with X,Y,Z.
If A is a cube and if you wish you can bring X,Y,Z also in the cube in one or more dimensions.
If you keep X,Y,Z as vag attributes rather than in te cube as dimensions, then , the system will generate SIDs for them.
Ravi Thothadri

How does the adapter specific parameters gets filled up?

Similar Messages

Maybe you are looking for