How Execute a very long SQL in a Storep Procedure inside a String?

How Execute a very long SQL in a Storep Procedure inside a String?
I have a very very long sql in a String , How can I run this SQL?
Thaks in advance.

Xavi wrote:
I have a very very long sql in a String , How can I run this SQL? Version? If you are on 11g, dynamic SQL can be a CLOB. If you are on older versions us DBMS_SQL package.
SY.

Similar Messages

How to trace Very Long SQL and PLSQL?

Hi,
i need an advice on how to trace very long PLSQL as iam new to my company and the business is very new to me , i am a very good developer using Developer suite , but my weak point is tracing very long packages and undestand them ,
i want to trace a Procedure that have a LOT of lines of code and it calls many other packages, i really need to be quick in undestading what this procedre is doing as i should solve my problem in appropriate time
i am using dbms_output.put_line for tracing, to know what is the path that is taken and the variable values but i think i need a totaly different approach
also there are some sqls in this system that is very long, some of them is joining more than 10 tables at the same time, any hint to understand what this sql is doing?
any help is appreciated.

There is a trace facility for PL/SQL, but if you use it find a GUI interface. Trying to get it to work in SQL*PLUS standalone was painful. I think its supported by the major GUI tools like TOAD and PL/SQL developer but have not used it myself.
Other tools you can work with to help you debug and tune PL/SQL include Oracle trace (which analyzes SQL for efficiency, with an interpreter called tkprof) and DBMS_PROFILER. DBMS_PROFILER requires some initial set-up but can analyze PL/SQL code line by line and if used carefully function as a sort of limited trace.
Good luck!

How to print very long data series (wrap multiple XY graphs)

I'm working a data logger project where each file usually contains 5 - 10 minutes of data but sometimes may go up to 3 hours +. The customer needs the ability to print out all of the acquired data in XY charts.
If the amount of data recorded exceeds 15 minutes, printing all of the data on a single chart is not an option (granularity) so they want to print as many 15 minute chunks as necessary to cover the entire range. Ideally, they want to print out two 15 minute graphs stacked on top of each other on a landscape page. I can split the data into chunks (that's the easy part) but I need a way to create an arbitrary number of XY graphs and format/size them for mult-page print out (2 per page).
I'm looking for some ideas on how to solve this problem - any ideas are welcome as long as they involve LabVIEW and maybe Excel because it needs to be something i can integrate into the application. I can't use offline post-processing like Diadem in this situation.
Philip
CLD

Philip,
I would probably create one VI with two graphs formatted for printing. Then loop through the data, write segments to the graphs, print, repeat until all data is printed. This method allows one very simple VI to present the data for printing and allows the user control over what is printed via the calling VI. For example if they decided that 10-minute graphs were better for certain data sets than 15-minute graphs, all the calling VI needs to do is change the amount of data written to the graphs.
Write the data to a file to protect the data in the event of power failures or other unplanned events. Read it back to print if there may be too much data to keep in memory.
Lynn

How can I deal with long sql by the oo4o?

I am using VB and oo4o to develop a sql executor which is a extention of an old system.
For some reason, I have to use oo4o v8.1.7 to deal with Oracle Database 8i to 11g.
But when I send a very long sql(11KB) to it I got a error in the VB enviroment.
The Err.Description is "automention error. Started object is disconnected by the client.".
The Err.Number is "-2147417848 ".
The sql that I send it to the program is a simple select sql that like select a, b, c, substrb(d, 1, 2), substrb(e, 2, 3) .... from A_TBL where A=aa;
This sql is normally executed by the sqlplus but I got an error by the oo4o.
When I insert a '' between the 30Xth items, it got exectuted normally.
ex. select a, b, c, substrb(d, 1, 2), substrb(e, 1, 2) ..... substrb(303th, 3, 4), '', substrb(304th, 1, 2) ... from A_TBL where A = aa;
How can I deal with this problem? Thanks.

So how can use this function correctly?By learning what exceptions are, how they're used, and what you can do to deal with them. There's a tutorial here: http://java.sun.com/docs/books/tutorial/essential/exceptions/index.htmlAnd here's a quick overview:
The base class for all exceptions is Throwable. Java provides Exception and Error that extend Throwable. RuntimeException (and many others) extend Exception.
RuntimeException and its descendants, and Error and its descendants, are called unchecked exceptions. Everything else is a checked exception.
If your method, or any method it calls, can throw a checked exception, then your method must either catch that exception, or declare that your method throws that exception. This way, when I call your method, I know at compile time what can possibly go wrong and I can decide whether to handle it or just bubble it up to my caller. Catching a given exception also catches all that exception's descendants. Declaring that you throw a given exception means that you might throw that exception or any of its descendants.
Unchecked exceptions (RuntimeException, Error, and their descendants) are not subject to those restrictions. Any method can throw any unchecked exception at any time without declaring it. This is because unchecked exceptions are either the sign of a coding error (RuntimeException), which is totally preventable and should be fixed rather than handled by the code that encounters it, or a problem in the VM, which in general can not be predicted or handled.

How to insert a very long string into a column of datatype 'LONG'

Can anyone please tell me how can I insert a very long string into a column of datatype 'LONG'?
I get the error, ORA-01704: string literal too long when I try to insert the value into the table.
Since it is an old database, I cannot change the datatype of the column. And I see that the this column already contains strings which are very long.
I know this can be done using bind variables but dont know how to use it in a simple query.
Also is there any other way to do it?

Hello,
To preserve formatting in this forum, please enclose your code output between \ tags. And when executing you code as a pl/sql or sql script
include following lineset define off;
Your code or output goes here
\Regards
OrionNet

Sql Query taking very long time to complete

Hi All,
DB:oracle 9i R2
OS:sun solaris 8
Below is the Sql Query taking very long time to complete
Could any one help me out regarding this.
SELECT MAX (md1.ID) ID, md1.request_id, md1.jlpp_transaction_id,
md1.transaction_version
FROM transaction_data_arc md1
WHERE md1.transaction_name = :b2
AND md1.transaction_type = 'REQUEST'
AND md1.message_type_code = :b1
AND NOT EXISTS (
SELECT NULL
FROM transaction_data_arc tdar2
WHERE tdar2.request_id = md1.request_id
AND tdar2.jlpp_transaction_id != md1.jlpp_transaction_id
AND tdar2.ID > md1.ID)
GROUP BY md1.request_id,
md1.jlpp_transaction_id,
md1.transaction_version
Any alternate query to get the same results?
kindly let me know if any one knows.
regards,
kk.
Edited by: kk001 on Apr 27, 2011 11:23 AM

Dear
/* Formatted on 2011/04/27 08:32 (Formatter Plus v4.8.8) */
SELECT   MAX (md1.ID) ID, md1.request_id, md1.jlpp_transaction_id,
         md1.transaction_version
    FROM transaction_data_arc md1
   WHERE md1.transaction_name = :b2
     AND md1.transaction_type = 'REQUEST'
     AND md1.message_type_code = :b1
     AND NOT EXISTS (
            SELECT NULL
              FROM transaction_data_arc tdar2
             WHERE tdar2.request_id = md1.request_id
               AND tdar2.jlpp_transaction_id != md1.jlpp_transaction_id
               AND tdar2.ID > md1.ID)
GROUP BY md1.request_id
        ,md1.jlpp_transaction_id
        ,md1.transaction_versionCould you please post here :
(a) the available indexes on transaction_data_arc table
(b) the description of transaction_data_arc table
(c) and the formatted explain plan you will get after executing the query and issuing:
select * from table (dbms_xplan.display_cursor);Hope this helps
Mohamed Houri

Why UPD processes execute report RSM13000 for very long time?

Hi,
When I use sm50 or sm51 to check my CRM system which version is 5.0, I found some UPD processes execute report RSM13000 for very long time. And some DIA processes are executing report SAPMSSY1 for verly long time too. They are occupy lot of processes of system. How does this happen? What's the reason and how to solve it? Thanks for your help!
Many thanks and Best regards,
Long

Please check the configurtion of your system.As per your reply it seems that the work processes are not sufficient in the system.
Hi wait time and response time ,is problem in the system.Either you have a lot of load on the system or you CPU's are over loaded.
Please check the system status from st06 and look for the cpu utilisation /memory utilisation.
SM66 to see the long running online and background jobs.
St03n - look for the workload and wait times for all transactions.
st02-may help in checking the memory paramaetrs.
Hope it will help you in resolving the issue.
Thanks
Amit

Macbook Pro, bought 2012, takes a very long time to start up/restart (5 mins). How do I fix this?

My Macbook Pro, bought 2012, takes a very long time to start up/restart (5 mins) every single time I have shut it down. I try not to shut it down at all now because once or twice, I have got a grey screen, and then nothing. I've held down the power button to shut down again and restart How do I fix all this?

Start up with your built-in Recovery disk by holding down the Command and R keys when starting. Open Disk Utility from there and use it to REPAIR your disk (you've already verified it and it came up with errors).
With any luck, your problems will be solved. While I was there, I would also repair permissions.
Good luck,
Clinton

I have an old ipod that i have not used in a very long time, ive had it on a charger now for over an hour and i still cnnot get my ipod to turn on, how can i fix my problem, i just downloaded the new version of itunes aswell, so i know its not my itunes.

i have an old ipod touch that i have not used in a very long time, and im having trouble gettign it to turn on. ive had it on a charger for over an hour now and still nothing hs changed. i just updated my itunes to the current version they haev so i know its not an itunes problem its rather a problem with the old ipod touch itself. im leaving for deployment soon and im trying to get this fixed without having to send it in. If anyone has any ideas on how to get this thing turned on it would be greatly appreciated.

Well, two thoughts.
The battery has completely discharged and will take overnight to recharge, so don't expect much in an hour.
The battery has deep discharged and is now dead. It will never recharge and should be replaced.
If your iPod Touch, iPhone, or iPad is Broken
Apple does not fix iDevices. Instead they exchange yours for a refurbished or new replacement depending upon the age of your device and refurbished inventories. On rare occasions when there are no longer refurbished units for your older model, they may replace it with the next newer model.
You may take your device to an Apple retailer for help or you may call Customer Service and arrange to send your device to Apple:
Apple Store Customer Service at 1-800-676-2775 or visit online Help for more information.
To contact product and tech support: Contacting Apple for support and service - this includes international calling numbers.
iPod Service Support and Costs
iPhone Service Support and Costs
iPad Service Support and Costs
There are third-party firms that do repairs on iDevices, and there are places where you can order parts to DIY if you feel up to the task. Start with Google to search for these.
The flat fee for a battery exchange is, I believe, $99.00 USD.

How do I return two values from a stored procedure into an "Execute SQL Task" within SQL Server 2008 R2

Hi,
How do I return two values from a
stored procedure into an "Execute SQL Task" please? Each of these two values need to be populated into an SSIS variable for later processing, e.g. StartDate and EndDate.
Thinking about stored procedure output parameters for example. Is there anything special I need to bear in mind to ensure that the SSIS variables are populated with the updated stored procedure output parameter values?
Something like ?
CREATE PROCEDURE [etl].[ConvertPeriodToStartAndEndDate]
@intPeriod INT,
@strPeriod_Length NVARCHAR(1),
@dtStart NVARCHAR(8) OUTPUT,
@dtEnd NVARCHAR(8) OUTPUT
AS
then within the SSIS component; -
Kind Regards,
Kieran.
Kieran Patrick Wood http://www.innovativebusinessintelligence.com http://uk.linkedin.com/in/kieranpatrickwood http://kieranwood.wordpress.com/

Below execute statement should work along the parameter mapping which you have provided. Also try specifying the parameter size property as default.
Exec [etl].[ConvertPeriodToStartAndEndDate] ?,?,? output, ? output
Add a script task to check ssis variables values using,
Msgbox(Dts.Variables("User::strExtractStartDate").Value)
Do not forget to add the property "readOnlyVariables" as strExtractStartDate variable to check for only one variable.
Regards, RSingh

After upgrading to iOS 5, my iPhone 4 takes a very long time to open digitally signed emails. I've tried with the SMIME settings enabled, but that doesn't help either. Any ideas on how to resolve this? Thanks in advance.

After upgrading to iOS 5, my iPhone 4 takes a very long time to open digitally signed emails. I've tried with the SMIME settings enabled, but that doesn't help either. Any ideas on how to resolve this? Thanks in advance.

I suspect you may have a corrupt photo or image that is causing the sync to fail or quit. You might want to try removing all of your photos by deselecting them in iTunes then sync - and try adding them by each sub-folders until you are able to nail down which sub-folder of photos, that causes the sync to stop or gives you errors.

I got a new laptop (Macbook Pro) and my IPhone is synced with my previous laptop. I've recorded dozens of very long (un-emailable) Voice Memos over the last few weeks and need to get them from my IPhone onto my new laptop. How do I do this?

I got a new laptop (Macbook Pro) and my IPhone is synced with my previous laptop (which I no longer have). I've recorded dozens of very long (un-emailable) Voice Memos over the last few weeks and need to get them from my IPhone onto my new laptop.
How do I do this?
(when I click on the Sync option I get the warning: "Are you sure you want to sync music? All existing songs and playlists on the iPhone will be replaced with songs and playlists from your iTunes library." I fear that if I click this I will lose all of my important Voice Memos as well)

Just to add to what ChrisJ4203 said. You can sync them to your new computer using iTunes by selecting to Include Voice Memos on the Music tab of your iTunes sync settings and syncing. However, you still need to re-establish syncing with the new computer without iTunes erasing all the iTunes media from your phone (as the warning mentioned).
If you copy your entire iTunes folder (not just your music) from your old computer to your new one, along with other non-iTunes media you may be syncing with iTunes (such as contacts, calendars and any photos synced to your phone from your old computer) by using migration assistant of following one of these methods: http://support.apple.com/kb/HT4527, then when you sync again with your new computer it will recognize your phone and sync as it did before. You will still have to authorize the new computer for any Apple IDs used to purchase from the iTunes and App stores (in iTunes>Store>Authorize this computer).
After that you can sync your voice memos to your computer as mentioned earlier.
If you want to archive your voice memos before you do anything with iTunes, you can use a 3rd party program such as PhoneView or Touch Copy.

I have a keynote presentation that includes a significant amount of video. When I edit the keynote slides (not the video slides) how can I save the changes without re-saving the videos (because that takes a VERY long time)?

I have a keynote presentation that includes a significant amount of video. When I edit the keynote slides (not the video slides) how can I save the changes without re-saving the videos (because that takes a VERY long time)? I edit the presentation depending on the audience to which I am presenting.

If you add a new slide with just a text box (therefore a very small amount of data), to an existing presentation then save, Keynote will only save the new content to the file, it wont save pre-existing content as its already included in the file.
The time taken to "save" will be very much shorter than a "save as" when all of the existing content is saved again.

How to indent second line in a very long heading when creating a table of contents?

I need to make a table of contents.
Some of the chapter headings are very long and fill more than a single line.
When I create my table of contents, I want the second lines to be 'pushed in' in the table.
Like this
1 chaper one xxxxxxxxxxx
2 Chapter two xxxxxxxxxxxxxxxxxx
3 Chapter three x xxxxxxxxxxxx xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
xxxxxxxxxxxxx xxxxxxxxxxx
4 Charpter four xxxxx xxxxx
5 Chapter five xxxxxxxxxx xxx xxxxx xx xxxxxxxxxxxxxxxxxxx xxxxxxxxxxxxxxxxxxxxxx
xxxxxxxxx xxxx xxxxx
I thought I had solved it by having the actual chapter headings indented like this, but the table of contents overlooks this/overrules this.

See also my reply to the duplicate thread:
http://social.technet.microsoft.com/Forums/office/en-US/8f88b64c-1a15-4761-aed9-f662f17b94ca/how-to-indent-second-line-in-a-very-long-heading-when-creating-a-table-of-contents?forum=word
Cheers
Paul Edstein
[MS MVP - Word]

How to execute .sql file in Stored Procedure?

Hi,
I have an urgent requirement, where i have to execute .sql file form Stored Procedure.
This .sql file will have set of update statement. I need to pass value to this update statement.
Kindly please help me.
Regards,
Irfan

This is required as part of Data Migration where i have to do 100 of table's update. Each time update table will defer, so its better to have in separate script file (.sql). Can u paste some sample/syntax to exceute .sql file from stored procedure. I am new to this PL/SQL.
How have you determined that it's "better" to have seperate scripts? I assume you mean the table name will "differ" (and not "defer" - I assume that's just because English isn't your first language? no problem - I think I understand what you're asking).
So what I think you're asking is that you have dynamic table names but each table needs to be updated in the same way?
Question: Why do you have tables with different names that all need the same process doing to them?
Assuming it's a valid requirement (and 99% of the time doing dynamic coding implies it's not).... you could use dynamic code, rather than 'scripts'...
e.g.
create procedure update_table(tbl_name varchar2) is
begin
execute immediate 'update '||tbl_name||' set lastupdate = null';
end;
As you haven't bothered to provide a database version, any example code/data or explanation of what you're actually doing, you're not going to get any detailed answer. Please do take the time to read the FAQ and post appropriate details so people can help you.

How Execute a very long SQL in a Storep Procedure inside a String?

Similar Messages

Maybe you are looking for