How Format Text in ALV Colum when Column set as TEXTVIEW

I am displaying ALV with Multiple Column's , One of the Column is TEXTVIEW .
When ALV is Displayed TEXT Column Comes as Continues TEXT and is Not Formatted .
Now when i want to edit this text i am Calling another View which contains UI element Formated textview . This Formated textview will display correct Formatted Text . but when i save it and Come back to ALV again i do see continues text .
I use the cl_salv_wd_uie_text_view to set the ALV Column as text view.
Is there any way where in i can display the Formatted text in ALV Column ?
Thanks in Advance
Badarinarayan patil

Hi ,
You cannot use the Formatted TextView as a celleditor in table or ALV , its not provided by SAP .
Regards
Yash

Similar Messages

How to Display Formatted Text IN ALV Column?

HI experts ,
I am displaying ALV with Multiple Column's , One of the Column is TEXT(Fomatted text).
When ALV is Displayed TEXT Column Comes as Continues TEXT . and is Not Formatted .
Now when i want to edit this text i am Calling another View which contains text edit . This Text edit will display correct Formatted Text . but when i save it and Come back to ALV again i do see continues text .
Is there any way where in i can display the Formatted text in ALV Column ?
Any body have any clue with this ...
Thanks in Advance
Patil
Edited by: Badarinarayan Patil on Feb 22, 2008 3:45 PM

Hi Juergen,
I found Your blog and found it really interesting... though I was not able to use it: I (like Jun Li is asking, I guess) need to use a dynamic text, containing formatting informations (according the xhtml syntax).
I tried to pass it to the form by an ABAP-dictionary based interface and by means of the context (in a webdynpro page), but both tries failed.
Some suggestion will be greatly appreciated.
Thankyou
Simone

How Context text search index synchronized when updating non index column?

Hi,
Please can any one guide me,
I have update a column in a table which is not indexed in context index.
After indexing i synchronize still iam not able to see updated column.
if update index column in table its getting synchronize and i could see the updated columns in contains
select statement.please give me a solution for this?

Hi i have a table called customer and Phone relation ship will be customeriid in both tables
In customer table i indexed comapnyname
CREATE OR REPLACE PROCEDURE companycontactColumns_Search
(p_rowid IN ROWID,
p_clob IN OUT CLOB)
AS
M_clob CLOB;
BEGIN
FOR c1 IN (SELECT Customeriid,Companyname||' ' AS data
FROM Customer
WHERE ROWID = p_rowid) LOOP
M_clob := M_clob || c1.data;
FOR c2 IN
(SELECT ' ' || PHONENUMBER || ' ' || Phonenumber AS data
FROM Phone
WHERE parentiid = c1.Customeriid)
LOOP
M_clob := M_clob || c2.data;
END LOOP;
END LOOP;
p_clob := M_clob;
END companycontactColumns_Search;
Begin
Ctx_DDL.create_preference('Companycontactsearch2','USER_DATASTORE');
ctx_DDL.Set_Attribute('companycontactsearch2','Procedure','companycontactColumns_Search');
end;
create index customer_text_idx on Customer(companyname)
indextype is ctxsys.context Parameters('datastore companycontactsearch2 Sync (on commit)');
Hi if i update phonenumber in phone table its not getting refereshed please guide me.

Is there a way to format text (ie: bold, size) when using the browser edit function

How do you add a trademark symbol

Text formatting/styling isn't supported through IBE at this time but you can type the Trademark symbol as mentioned in the following article, there should be no problems in syncing it back to your Muse project - http://www.wikihow.com/Type-the-Trademark-Symbol
Thanks,
Vinayak

How to skip the alv list when submit a report by SUBMIT statement?

Dear Experts,
I have to submit a report(RMVKON00) for a special request in my add-on program, I use the following statment:
SUBMIT RMVKON00
AND RETURN EXPORTING LIST TO MEMORY.
CALL FUNCTION 'LIST_FROM_MEMORY'
TABLES
    LISTOBJECT = ABAPLIST_TAB
EXCEPTIONS
    NOT_FOUND = 1
    OTHERS     = 2.
CALL FUNCTION 'LIST_TO_ASCI'
* EXPORTING
*   LIST_INDEX               = -1
*   WITH_LINE_BREAK          = ' '
TABLES
    LISTASCI                 = LISTASCI_TAB[]
   LISTOBJECT                = ABAPLIST_TAB
EXCEPTIONS
   EMPTY_LIST               = 1
   LIST_INDEX_INVALID       = 2
   OTHERS                   = 3
But it still display the alv list , and I must click button 'BACK' ,then it return my add on program.
I hope to skip the alv list (does not display the alv list ) .
Would you like to help me?
Thanks and Best Regards,
Colin.
Edited by: Colin on Jan 8, 2010 10:09 AM

Hi Colin,
I dont think you would be able to skip the ALV output using SUBMIT. However try changing the value of sy-lsind after the submit statement.
SUBMIT RMVKON00
AND RETURN EXPORTING LIST TO MEMORY.
sy-lsind = sy-lsind - 1.
If that doesnt work then try using JOB_START JOB_SUBMIT, JOB_CLOSE...
Thanks,
Best regards,
Prashant

How can I remove print margins when manually setting them to zero doesn't work?

I'm trying to print a web page that I've created with a custom paper size of 4.5x10.25 inches. I want the page to be printed right to the edge of the paper, with no margins at all.
I've been reading for a few days and the best thing I can find is to use Mac's Page Setup dialog to create a custom paper size and custom margins, which I've done and set to the default for all of my printers. (Hopefully I'm able to post links to images --> http://i.imgur.com/kVbOZLk.png). No matter what I do though I can't get the margins to go away. There's always always always a .75 inch margin when I print and when I print preview (Again, hoping I can post links to images --> http://i.imgur.com/cxlVS8o.png). Just to note: The same thing happens printing other websites and documents (i.e it is not a problem with my website).
Things I've tried:
I've read that the margins are only visible in print preview and printing the page will remove them. This didn't work.
I've tried tricking the system by setting my margins to 0.01 inches
I've tried adjusting the website to not be exactly the size of the page (I made it smaller) and the margins were still there.
I've set "print.print_extra_margin" to 0 in Firefox's about:config page.
I've tried a different printer.
I've tried a co-worker's machine running a newer version of OSX.
I've made absolutely sure that my page size it set correctly.
I'm using OSX 10.6.8 with Firefox v21.0.
The closest I can come to this is using Google Chrome, where there is a specific option for "none" in margins and the Chrome preview looks okay, but I'm not able to specify paper size unless I click "Print using system dialog" which gives me the same problems as above.
How do I remove the margins and just fit to the exact size of the page?

Welcome to Apple Support Communities. We're all users here.
Does your Print dialog offer photo 'borderless printing' settings for various paper sizes?
Every photo printer I've ever encountered leaves some unprintable margin, unless 'borderless' and/or 'photo' media are specifically selected.
On many of the Canon inkjet color printers I've used, borderless printing is only available when one of the photo papers is selected, even when a custom size specified that is smaller than the actual paper, trying to make it 'borderless'
I stitch together and print panoramas of theatre sets for my local community theater, so I end up with an image about 4.5 inches by 11.5 inches to be printed.
Selecting a photo and opening in Preview and selecting 'Fill Entire Paper' illustrates the standard unprintable borders for my specific printer.
When I open the panoramic image in Preview, I get this print preview. (The set image is of course rotated left)
By selecting Letter and Borderless in the Paper Size dialog for my Canon MG5320 printer, I get this result.
This particular Canon printer of course does NOT actually 'know' what paper is inserted, but the ink is applied assuming that a photo paper is being used, so it will saturate a standard paper.
Hope this helps!
Message was edited by: kostby

HT5661 how can I recver origonal password when I set up my ipad 3

How can I recover my origonal password used to set up my ipad 3 I forgot it

https://appleid.apple.com/cgi-bin/WebObjects/MyAppleId.woa/

Updateable ViewObject Throws Error When Column Set To Null

I have an updateable ViewObject that has not changed since it was created. In JDeveloper 9.0.3 I was able to pass a node with a null value into the ViewObject, post the changes, and the underlying table was updated without incident. We are upgrading the tools we use which includes JDeveloper. We need to clear the values (set them to null) in certaincircumstances. What is the secret to it? Either I have not set a parm properly or the code was malformed at the start (I did not create the initial code).
The column to be updated is UpdatedBy.
Original code - row.setUpdatedBy(null);
Attempted change - row.setAttribute("UpdatedBy",null);
Neither worked and threw the following:
oracle.jbo.domain.DataCreationException: JBO-25009: Cannot create an object of type:java.math.BigDecimal with value:
UpdatedBy is a BigDecimal type and the database column is NUMBER(9, 0). Nulls are allowable.
All help is appreciated.
Thanks,
pdr
Additional info:
The original code works fine under 9.0.3 but not under 9.0.5.
Column can be updated using the connect PrepareStatement and passing the update SQL.
Message was edited by:
pdreaiii

I am now able to update the column using the setAttribute. Weird that it is now but not before.
Still having an issue with inserting/updating rows using XML. Here is the XML node we are pushing to the ViewObject - the UpdatedBy child node was created with a null value:
<AssessmentLockViewRow>
<WorkerId>1236</WorkerId>
<AsmtId>1593730</AsmtId>
<SynchLock>N</SynchLock>
<UpdatedBy>
</UpdatedBy>
</AssessmentLockViewRow>
This was created using the following (trimmed for space:
//start code
//create the Node for persistance
XMLHelper helper = new XMLHelper(SECOND_CHILD);
try {
helper.addNode(SECOND_CHILD, "WorkerId", workerId);
helper.addNode(SECOND_CHILD, "UpdatedBy", updatedBy); // can be null
} catch (NodeNotFoundException e) {
error(CLASS_NAME, METHOD_NAME, e);
throw new EventException(e);
Node rowToAdd = helper.getRootNode();
ApplicationModule am = _appMod;
ViewObject vo = am.findViewObject(VIEW_OBJECT);
Row r = vo.first();
// r.setAttribute("UpdatedBy",updatedBy);
vo.readRowXML((Element)rowToAdd, 0);
am.getTransaction().validate();
am.getTransaction().postChanges();
//end code
The app module was created using
_appMod = (ApplicationModule)Configuration.createRootApplicationModule(
APP_MODULE, APP_MODULE_CONFIG, envInfo);
the envInfo is the user information.
Do I have something wrong here? I think I am doing something wrong but can't spot it.
Thanks.

How do i disable prompt massege when i set Private Browsing in Firefox 7.0.1 Mac OS X Snow Leopard?

I don't want the prompt appears every time i sing in every site i visit but i need to record passwords and users.

Thank rbillings for the answer but I just realize that my question is wrong.
What I want to do is to activate (Preferences > Security > passwords > (Remenber passwords for sites) and I don't want the "Prompt Message" appears every time I enter to a site with password.
Thank, and I hope somebody can answer me this question.

PJC to input formatted text into a long/clob field

Hi,
Is there a PJC that can be used to stored formatted text into a LONG/CLOB column in the database (Something similar to the Message field while posting a new thread in this forum). I am using Oracle Forms 10G (9.0.4)
I would also like to print this formatted text using Oracle Reports 10G (9.0.4).
Thx in Advance
Best Rgds
Ramdas

Hello 
Have a look at this new forum, and particulary this article that shows how to create an editable styled text area. 
Francois

How to Edit in ALV?

Hi Experts,
I am working on a BAPI for creating Requsition where i am taking one ref PR and then modifying required details and then creating a new PR.
Everything is working fine but before creating the new PR i want to display that data in the form of alv grid and where i can edit the values and save then a new PR will be created as per modification on alv.
check the sample code wht i hv done....
SELECT * FROM EBAN INTO CORRESPONDING FIELDS OF TABLE IT_EBAN WHERE
BANFN EQ S_BANFN.
LOOP AT IT_EBAN.
ENDLOOP.
LOOP AT IT_EBAN.
T_REQUISITION_ITEMS-DOC_TYPE = 'ZSD'.
MOVE IT_EBAN-BNFPO TO T_REQUISITION_ITEMS-PREQ_ITEM.
MOVE IT_EBAN-ERNAM TO T_REQUISITION_ITEMS-CREATED_BY.
MOVE IT_EBAN-AFNAM TO T_REQUISITION_ITEMS-PREQ_NAME.
MOVE IT_EBAN-BADAT TO T_REQUISITION_ITEMS-PREQ_DATE.
MOVE IT_EBAN-TXZ01 TO T_REQUISITION_ITEMS-SHORT_TEXT.
MOVE IT_EBAN-MATNR TO T_REQUISITION_ITEMS-MATERIAL.
MOVE IT_EBAN-EMATN TO T_REQUISITION_ITEMS-PUR_MAT.
T_REQUISITION_ITEMS-PLANT = '4000'.
T_REQUISITION_ITEMS-STORE_LOC = 'YRD1'.
T_REQUISITION_ITEMS-PUR_GROUP = 'JSD'.
MOVE IT_EBAN-MATKL TO T_REQUISITION_ITEMS-MAT_GRP.
MOVE IT_EBAN-MENGE TO T_REQUISITION_ITEMS-QUANTITY.
MOVE IT_EBAN-MEINS TO T_REQUISITION_ITEMS-UNIT.
T_REQUISITION_ITEMS-DELIV_DATE = '20080618'.
APPEND T_REQUISITION_ITEMS.
CALL FUNCTION 'BAPI_REQUISITION_CREATE'
EXPORTING
SKIP_ITEMS_WITH_ERROR =
IMPORTING
NUMBER = E_NUMBER
TABLES
REQUISITION_ITEMS = T_REQUISITION_ITEMS
*REQUISITION_ACCOUNT_ASSIGNMENT = T_REQ_ACCOUNT_ASSIGNMENT
REQUISITION_ITEM_TEXT =
REQUISITION_LIMITS =
REQUISITION_CONTRACT_LIMITS =
REQUISITION_SERVICES =
REQUISITION_SRV_ACCASS_VALUES =
RETURN = T_RETURN
REQUISITION_SERVICES_TEXT =
EXTENSIONIN =
REQUISITION_ADDRDELIVERY =
ENDLOOP.
IF NOT E_NUMBER IS INITIAL .
WRITE:/ 'REQ NO:' , E_NUMBER , 'CREATED'.
ELSE.
LOOP AT T_RETURN.
WRITE T_RETURN-MESSAGE.
ENDLOOP.
ENDIF.
what i want is before calling BAPI_REQUISITION_CREATE i need to display it_eban as alv and then where i can edit the values and save and that values will move to T_REQUISITION_ITEMS table. no need of hard cording Plant and purch. grop and storage location details. I know how to display the ALV grid just tell me how to edit in ALV and when i cllick save it shold move to BAPI_REQUISITION_CREATE.
its an urgent...
points will be rewarded for useful answers
Regards,
sunil kairam.

Check this editable alv report...
REPORT zjay_edit_alv.
* TYPE-POOLS *
TYPE-POOLS: slis.
* INTERNAL TABLES/WORK AREAS/VARIABLES
DATA: i_fieldcat TYPE slis_t_fieldcat_alv,
i_index TYPE STANDARD TABLE OF i WITH HEADER LINE,
w_field TYPE slis_fieldcat_alv,
p_table LIKE dd02l-tabname,
dy_table TYPE REF TO data,
dy_tab TYPE REF TO data,
dy_line TYPE REF TO data.
* FIELD-SYMBOLS *
FIELD-SYMBOLS: <dyn_table> TYPE STANDARD TABLE,
<dyn_wa> TYPE ANY,
<dyn_field> TYPE ANY,
<dyn_tab_temp> TYPE STANDARD TABLE.
* SELECTION SCREEN *
PARAMETERS: tabname(30) TYPE c DEFAULT 'MARA',
lines(5) TYPE n DEFAULT 7.
* START-OF-SELECTION *
START-OF-SELECTION.
* Storing table name
p_table = tabname.
* Create internal table dynamically with the stucture of table name
* entered in the selection screen
CREATE DATA dy_table TYPE STANDARD TABLE OF (p_table).
ASSIGN dy_table->* TO <dyn_table>.
IF sy-subrc <> 0.
MESSAGE i000(z_zzz_ca_messages) WITH ' No table found'.
LEAVE TO LIST-PROCESSING.
ENDIF.
* Create workarea for the table
CREATE DATA dy_line LIKE LINE OF <dyn_table>.
ASSIGN dy_line->* TO <dyn_wa>.
* Create another temp. table
CREATE DATA dy_tab TYPE STANDARD TABLE OF (p_table).
ASSIGN dy_tab->* TO <dyn_tab_temp>.
SORT i_fieldcat BY col_pos.
* Select data from table
SELECT * FROM (p_table)
INTO TABLE <dyn_table>
UP TO lines ROWS.
REFRESH <dyn_tab_temp>.
* Display report
CALL FUNCTION 'REUSE_ALV_LIST_DISPLAY'
EXPORTING
i_callback_program = sy-repid
i_structure_name = p_table
i_callback_user_command = 'USER_COMMAND'
i_callback_pf_status_set = 'SET_PF_STATUS'
TABLES
t_outtab = <dyn_table>
EXCEPTIONS
program_error = 1
OTHERS = 2.
IF sy-subrc <> 0.
ENDIF.
*& Form SET_PF_STATUS
* Setting custom PF-Status
* -->RT_EXTAB Excluding table
FORM set_pf_status USING rt_extab TYPE slis_t_extab.
SET PF-STATUS 'ZSTANDARD'. "copy it from SALV func group standard
ENDFORM. "SET_PF_STATUS
*& Form user_command
* Handling custom function codes
* -->R_UCOMM Function code value
* -->RS_SELFIELD Info. of cursor position in ALV
FORM user_command USING r_ucomm LIKE sy-ucomm
rs_selfield TYPE slis_selfield.
* Local data declaration
DATA: li_tab TYPE REF TO data,
l_line TYPE REF TO data.
* Local field-symbols
FIELD-SYMBOLS:<l_tab> TYPE table,
<l_wa> TYPE ANY.
* Create table
CREATE DATA li_tab TYPE STANDARD TABLE OF (p_table).
ASSIGN li_tab->* TO <l_tab>.
* Create workarea
CREATE DATA l_line LIKE LINE OF <l_tab>.
ASSIGN l_line->* TO <l_wa>.
CASE r_ucomm.
* When a record is selected
WHEN '&IC1'.
* Read the selected record
READ TABLE <dyn_table> ASSIGNING <dyn_wa> INDEX
rs_selfield-tabindex.
IF sy-subrc = 0.
* Store the record in an internal table
APPEND <dyn_wa> TO <l_tab>.
* Fetch the field catalog info
CALL FUNCTION 'REUSE_ALV_FIELDCATALOG_MERGE'
EXPORTING
i_program_name = sy-repid
i_structure_name = p_table
CHANGING
ct_fieldcat = i_fieldcat
EXCEPTIONS
inconsistent_interface = 1
program_error = 2
OTHERS = 3.
IF sy-subrc = 0.
* Make all the fields input enabled except key fields
w_field-input = 'X'.
MODIFY i_fieldcat FROM w_field TRANSPORTING input
WHERE key IS INITIAL.
ENDIF.
* Display the record for editing purpose
CALL FUNCTION 'REUSE_ALV_LIST_DISPLAY'
EXPORTING
i_callback_program = sy-repid
i_structure_name = p_table
it_fieldcat = i_fieldcat
i_screen_start_column = 10
i_screen_start_line = 15
i_screen_end_column = 200
i_screen_end_line = 20
TABLES
t_outtab = <l_tab>
EXCEPTIONS
program_error = 1
OTHERS = 2.
IF sy-subrc = 0.
* Read the modified data
READ TABLE <l_tab> INDEX 1 INTO <l_wa>.
* If the record is changed then track its index no.
* and populate it in an internal table for future
* action
IF sy-subrc = 0 AND <dyn_wa> <> <l_wa>.
<dyn_wa> = <l_wa>.
i_index = rs_selfield-tabindex.
APPEND i_index.
ENDIF.
ENDIF.
ENDIF.
* When save button is pressed
WHEN 'SAVE'.
* Sort the index table
SORT i_index.
* Delete all duplicate records
DELETE ADJACENT DUPLICATES FROM i_index.
LOOP AT i_index.
* Find out the changes in the internal table
* and populate these changes in another internal table
READ TABLE <dyn_table> ASSIGNING <dyn_wa> INDEX i_index.
IF sy-subrc = 0.
APPEND <dyn_wa> TO <dyn_tab_temp>.
ENDIF.
ENDLOOP.
* Lock the table
CALL FUNCTION 'ENQUEUE_E_TABLE'
EXPORTING
mode_rstable = 'E'
tabname = p_table
EXCEPTIONS
foreign_lock = 1
system_failure = 2
OTHERS = 3.
IF sy-subrc = 0.
* Modify the database table with these changes
MODIFY (p_table) FROM TABLE <dyn_tab_temp>.
REFRESH <dyn_tab_temp>.
* Unlock the table
CALL FUNCTION 'DEQUEUE_E_TABLE'
EXPORTING
mode_rstable = 'E'
tabname = p_table.
ENDIF.
ENDCASE.
rs_selfield-refresh = 'X'.
ENDFORM. "user_command

When saving a page under text format, the text is limited to 80 columns only, how to extend to 120 columns

When I save a page under text format, the text is limited to 80 columns only, how to extend to 120 columns (or more)?

HI K,
This is the Numbers (Mac OS) forum. Your question about Numbers for iOS will probably get better results posting in the iWork for iOS area. the link will take you there.
Regards,
Barry

How to make text formatting stick on book cover when sent to Apple or to PDF?

In iPhoto '11 (version 9), one can format text on book covers and in text blocks by selecting the text and right clicking. Font, size, color, and shadowing can be selected and changed. All of this displays correctly and sticks when the book is saved, etc. However, if the book is "previewed" or exported to a PDF (which I believe is the format sent to Apple for actual printing) some of the formatting is lost, permanently. It just goes away. Why? And, more importantly, how can I make this formatting stick? I'm mainly interested in shadowing as it gives the text a 3d look. All shadowing is lost - font and size do stick. I have successfully done this shadowing in several previous releases of iPhoto, and actually had it printed by Apple. Any ideas out there? Or is this another wonderful "feature" ?
Thanks for playing.

Sorry LN, but that is the problem. When I do either the preview or the export to PDF, the shadow formatting disappears. There is another forum discussion where some person discovered this only after receiving their three hard cover books. I'm pretty sure it is a bug. I have Snow Leopard and iPhoto '11 (v9) both with latest updates.
One other note - when applying the text shadow, anytime I adjust either of the three shadow sliders, the shadow disappears and I must click on the main shadow button to make the adjusted shadow reappear. As I said, it does then stick until I do either the preview or PDF as described in the article you referenced. Very, very, very annoying.
Will try to contact Apple today, although I have had very poor luck with ever getting them to admit to any problem in the past. ( pride goeth before the fall....). Hope they will listen, but I have a close deadline on this book.

So I have been creating a logo for my company and it came out great. The problem is, when I format it for PNG or when I want to use it on freshbooks or my webpage, the image becomes blurred and the text is not as clear. How do I fix this?

So I have been creating a logo for my company and it came out great. The problem is, when I format it for PNG or when I want to use it on fresh books or my webpage, the image becomes blurred and the text is not as clear. How do I fix this? Is it because the text get shrunk?

This is how it looks on adobe illustrator

How to display Long text in alv output

Hi,
I have developed an ALV report.It is displaying the output.
There is another requirment for alv output text field as below
From the long text fields show only the first 20 characters and afterwards the long text icon. If the icon is clicked open the long text display screen.
Please give your suggestion how to work on this requirement.
Thanks in advance

Hi,
Create a hotspot for the long text column of ALV.
When user clicks on the hotspot, handle the event to display long text screen.
You may refer sample program of hotspot ALV :
Goto SE38
Type BCALV*
Click F4
search for HOTSPOT or EVENTS & you will get a sample program.
Best regards,
Prashant

How Format Text in ALV Colum when Column set as TEXTVIEW

Similar Messages

Maybe you are looking for