How i can change default Deployment server in Creator 2 ea 2.
Hi
Thank you for reading my post.
I want to change Creator 2 ea 2 , deployment server
I used to use centeralized deployment server . and i want to change Creator server , and set it to that server.
How i can do this ?
Here is what worked for me.
changing the default application server.
1) Verify that JSC2 is creating a WAR file in the project's dist directory.
2) Download the Sun Java System Application Server 8.1
3) Install the application server on another computer. E.g. 192.168.1.110
I changed the default port from 8080 to 80 because I wanted to port forward.
Don't know if this is required.
4) Start the server! Browse to 192.168.1.110:80 and verify the server started.
5) Run the admin console (192.168.1.110:4848) and manually deploy the WAR file
If you can't do this, it wont go.
Your browser might appear to get stuck. Wait for it to finish! Check your logs for errors.
If you get stuck, doublecheck that the server directory isn't write-protected.
Test with a browser 192.168.1.110:80/ProjectName
6) Tell JSC2 about the new server
Servers Tab -> Remote Servers -> rightclick -> Add Remote Server...
Select the right kind of server (Sun Java System Application Server 8.1)
Admin Host: 192.168.1.110
Admin Port: 4848
Username: admin or whatever
Password: shhhhh!
7) Configure JSC2 to deploy the project to a different server during testing.
Projects Tab -> Right-click the project -> Properties -> Run -> select the new server.
8) Click the little green triangle and it should deploy and start a browser to test.
Trouble-shooting:
- Problems will occur if you attempt to do things to fast. Don't cancel out of operations.
- Don't modify any of you build.xml files
- Don't compress the war file
- Restart everything if you hit a problem
- Don't ask me, I don't know anything about it. I just fiddled with it till it worked.
- Turn off Netlimiter! (or any other bandwidth manager)
- Turn off Antivirus monitoring software (stuff runs faster - security rish though)
Similar Messages
-
How I can change default user that executes the process chain in BW 3.1?
In others versions is possible the change it in: "Process chain" >>> Attributes >>> Execution User >>> tick "Current User"., but in BW 3.1 donu2019t has this option. I need to change the user default (ALEREMOTE)
M,
Equally, I canu2019t change the user using SM37 transaction, because when I schedule a process chain, occurred an error:
"Job BI_PROCESS_LOADING could not be scheduled. Termination with returncode 8
Message no. RSPC065
Diagnosis
Program RSPROCESS is to be scheduled as job BI_PROCESS_LOADING under user ALEREMOTE" -
Outlook 2011 - I can change default folder?
How i can change default open folder in Outlook 2011 (update 14.1.3)?
And how i can change default incoming mail folder (POP account)?Here is what worked for me.
changing the default application server.
1) Verify that JSC2 is creating a WAR file in the project's dist directory.
2) Download the Sun Java System Application Server 8.1
3) Install the application server on another computer. E.g. 192.168.1.110
I changed the default port from 8080 to 80 because I wanted to port forward.
Don't know if this is required.
4) Start the server! Browse to 192.168.1.110:80 and verify the server started.
5) Run the admin console (192.168.1.110:4848) and manually deploy the WAR file
If you can't do this, it wont go.
Your browser might appear to get stuck. Wait for it to finish! Check your logs for errors.
If you get stuck, doublecheck that the server directory isn't write-protected.
Test with a browser 192.168.1.110:80/ProjectName
6) Tell JSC2 about the new server
Servers Tab -> Remote Servers -> rightclick -> Add Remote Server...
Select the right kind of server (Sun Java System Application Server 8.1)
Admin Host: 192.168.1.110
Admin Port: 4848
Username: admin or whatever
Password: shhhhh!
7) Configure JSC2 to deploy the project to a different server during testing.
Projects Tab -> Right-click the project -> Properties -> Run -> select the new server.
8) Click the little green triangle and it should deploy and start a browser to test.
Trouble-shooting:
- Problems will occur if you attempt to do things to fast. Don't cancel out of operations.
- Don't modify any of you build.xml files
- Don't compress the war file
- Restart everything if you hit a problem
- Don't ask me, I don't know anything about it. I just fiddled with it till it worked.
- Turn off Netlimiter! (or any other bandwidth manager)
- Turn off Antivirus monitoring software (stuff runs faster - security rish though) -
So, yesterday I wanted to buy 2 albums but it was the first buy in this device (I reset mi iPad 2 months ago) so it asked me for my security questions to confirm my identity but since is been a long time since I "used" me security questions I don't remember it so, eventually, I asked for the email to change either my password or my security questions but the email has 2 misspelled letters by a server error instead of being hotmail.com is writted a*******@hormail.clm sop I can't get any email, I already tried changing the mail email and the secondary email but still is the same mail a*******@hormail.clm so how I can change this without my security questions?
Security questions:
https://discussions.apple.com/docs/DOC-4551
http://support.apple.com/kb/HT5312
This is also useful:
http://www.macworld.co.uk/ipad-iphone/news/?newsid=3463233&olo=email -
Changing the default deployment server.
Hi.
Is it possible to change the default deployment server in studio Creator? I�m developing some portlets, and on my computer it takes 3 minutes to deploy a new portlet to my local host, but only a few second to deploy it to a remote server.Hi,
I guess, right now only way is to deploy to remote server( sun appserver and sun webserver) or export the WAR and deploy to any other web/app server
MJ -
How i can change port that oracle web server listen on in 10gEx
Hi
Thank you for reading my psot
How i can change the port 8080 that oracle web server listen on it ?
I have other server listening on this port and i can not change that port.
I have oracle 10g Express editionThis question has been asked and answered several times in the XE forum. Feel free to join us in the XE forum at Oracle Database Express Edition (XE)
If you're not registered there, do so using http://www.oracle.com/technology/xe/registration
The answer is to use dbms_xdb's sethttpport procedure. -
I downloaded an upgrade to my adobe reader today, and ever since my search engine has switched to yahoo and wont change back to google. I have a macbook pro, help please? Does anyone know how I can change this back? I have tried through my settings but it doesnt work
Hi Timia,
If you are using Safari as a web browser :-
Open Safari, go to Safari menu > Preferences > General, and put Google as the homepage. Then, choose Google as your default search engine.
If you are using Google Chrome as the web browser :-
Open Google Chrome.
In the top right corner of the page, click the Chrome menu Chrome menu > Settings.
In the "Search" section, select Google from the drop-down menu.
Let me know if you still experience any issue.
Regards,
Aadesh -
How do i change default printer settings
Hi
I have an Epson Photo PX720WD.
When I print photos directly from Finder they always print on the A4 plain paper I have in the tray rather than the 6 x 4 photo paper I want them to. The print option in Finder doesn't give me any opportuntiy to select settings like, for instance, iPhoto.
I don't want to import all pics into iPhoto as i like being able to print them from Finder so does anyone know how I can change the settings, preferably to make the 6 x photo setting the deafult?
Thanks in advance
SteveHi Eustace
thanks for the reply.......I'm on 10.7.5 but I think the issue is that I'm not printing from an App, I want to print direct from Finder and when I select cmd/p or go through the file menu and select print the dialogue box doesn't appear or isn't an option.
On all Apps that I've printed from cmd/p brings up the dialogue box or going to the file menu the print option looks like this:
Print....
Direct from Finder there are no dots meaning no dialogue box will appear.
I have about 50 pics I want to print so if I can change the default settings then I can simply cmd/p every time knowing that they'll print the way I want them.
I would also like to change the default settings as I print pics about 95% of the time so it's less hassle to change it when I want a plain A4 print.
Any ideas?!!
Thanks again
Steve -
Photoshop Elements 5.0 PC. Moved. How do I change outgoing mail server? Photoshop trying to connect to old server for emailing pictures. Thanks
You say you have the pse 5 disk?
I guess you do't have a dvd drive on your new windows 8 computer?
Do you have access to another computer with a dvd drive?
Anyway if you can find another computer with a dvd drive you could copy the pse 5 install disc to removable device like a camera card or flash drive.
You can also buy cheap usb dvd drives. -
How I can change regone Holliday date in iphone 5
Hi .
How I can change regone Holliday date in iphone 5.
Before new up 7,1 regone date was was easy to change.
After update by default shows SAT-SUN Hollydays . And in my regone FRI- SAT
It's HollydaysYay, the third post with the same question.
If you go back to one of your other ones... you'll see that you need to read the Forum FAQ and provide a wee bit more information
إذا كنت أعود إلى واحدة من تلك الأخرى الخاصة بك... سترى أن تحتاج إلى قراءة التعليمات المنتدى وتقديم معلومات أكثر قليلا وي
John -
Itune was not installed and i defaulted to pictures to open iphone 5s in windows 8, how do i change default to itune or nothing?
You need to try and explain your problem again. I'm not exactly sure what you are trying to describe the problem as. What do you mean you defaulted pictures to open phone? What default are you referring to here?
You can import pictures from the Camera Roll of the iPhone to the computer, and you can sync pictures from the computer to the iPhone using iTunes, but I don't know what you mean when you say defaulted pictures. -
How do I change default tab from .5 to .25 in word 2008 for mac?
Mountain Lion
How do I change default tab from .5 to .25 in word 2008 for mac?
Thanks
Message was edited by: Rafael Montserrat1
Thanks, RafaelThey haven't been checked as Solved, it's an option for you to choose one if the answer has solved your problem. You can mark one answer as Solved, and two as helpful. Only you, as the originator of the topic, can see these buttons.
Sorry for the goofed answer. Most people are looking to set the margins and I looked over that you were interested in the tabs.
To save tabs in fixed positions that will appear with every new document, you must modify the default template. You can't open the template from the desktop. If you do, it will open as a standard document. You must open it from the Open dialogue box from within Word. With Word in the foreground, press Command+O and navigate to:
/Users/your_account/Library/Application Support/Microsoft/Office/User Templates/
Open the file Normal.dotm
Set your tabs and save the file. Close the template. All new documents will now open with those preset tabs. -
can someone plz confirm me that how i can change or update the security questions related to my apple id? as i have been never put them since i create my apple id but now due to some security reasons its asking me again and again the answers. i am unable to go through the process. thanks.
Some Solutions for Resetting Forgotten Security Questions: Apple Support Communities
-
How I can change this query, so I can display the name and scores in one r
How I can change this query, so I can add the ID from the table SPRIDEN
as of now is giving me what I want:
1,543 A05 24 A01 24 BAC 24 BAE 24 A02 20 BAM 20in one line but I would like to add the id and name that are stored in the table SPRIDEN
SELECT sortest_pidm,
max(decode(rn,1,sortest_tesc_code)) tesc_code1,
max(decode(rn,1,score)) score1,
max(decode(rn,2,sortest_tesc_code)) tesc_code2,
max(decode(rn,2,score)) score2,
max(decode(rn,3,sortest_tesc_code)) tesc_code3,
max(decode(rn,3,score)) score3,
max(decode(rn,4,sortest_tesc_code)) tesc_code4,
max(decode(rn,4,score)) score4,
max(decode(rn,5,sortest_tesc_code)) tesc_code5,
max(decode(rn,5,score)) score5,
max(decode(rn,6,sortest_tesc_code)) tesc_code6,
max(decode(rn,6,score)) score6
FROM (select sortest_pidm,
sortest_tesc_code,
score,
row_number() over (partition by sortest_pidm order by score desc) rn
FROM (select sortest_pidm,
sortest_tesc_code,
max(sortest_test_score) score
from sortest,SPRIDEN
where
SPRIDEN_pidm =SORTEST_PIDM
AND sortest_tesc_code in ('A01','BAE','A02','BAM','A05','BAC')
and sortest_pidm is not null
GROUP BY sortest_pidm, sortest_tesc_code))
GROUP BY sortest_pidm;
Hi,
That depends on whether spriden_pidm is unique, and on what you want for results.
Whenever you have a problem, post a little sample data (CREATE TABLE and INSERT statements, relevamnt columns only) for all tables, and the results you want from that data.
If you can illustrate your problem using commonly available tables (such as those in the scott or hr schemas) then you don't have to post any sample data; just post the results you want.
Either way, explain how you get those results from that data.
Always say which version of Oracle you're using.
It looks like you're doing something similiar to the following.
Using the emp and dept tables in the scott schema, produce one row of output per department showing the highest salary in each job, for a given set of jobs:
DEPTNO DNAME LOC JOB_1 SAL_1 JOB_2 SAL_2 JOB_3 SAL_3
20 RESEARCH DALLAS ANALYST 3000 MANAGER 2975 CLERK 1100
10 ACCOUNTING NEW YORK MANAGER 2450 CLERK 1300
30 SALES CHICAGO MANAGER 2850 CLERK 950On each row, the jobs are listed in order by the highest salary.
This seems to be analagous to what you're doing. The roles played by sortest_pidm, sortest_tesc_code and sortest_test_score in your sortest table are played by deptno, job and sal in the emp table. The roles played by spriden_pidm, id and name in your spriden table are played by deptno, dname and loc in the dept table.
It sounds like you already have something like the query below, that produces the correct output, except that it does not include the dname and loc columns from the dept table.
SELECT deptno
, MAX (DECODE (rn, 1, job)) AS job_1
, MAX (DECODE (rn, 1, max_sal)) AS sal_1
, MAX (DECODE (rn, 2, job)) AS job_2
, MAX (DECODE (rn, 2, max_sal)) AS sal_2
, MAX (DECODE (rn, 3, job)) AS job_3
, MAX (DECODE (rn, 3, max_sal)) AS sal_3
FROM (
SELECT deptno
, job
, max_sal
, ROW_NUMBER () OVER ( PARTITION BY deptno
ORDER BY max_sal DESC
) AS rn
FROM (
SELECT e.deptno
, e.job
, MAX (e.sal) AS max_sal
FROM scott.emp e
, scott.dept d
WHERE e.deptno = d.deptno
AND e.job IN ('ANALYST', 'CLERK', 'MANAGER')
GROUP BY e.deptno
, e.job
GROUP BY deptno
;Since dept.deptno is unique, there will only be one dname and one loc for each deptno, so we can change the query by replacing "deptno" with "deptno, dname, loc" throughout the query (except in the join condition, of course):
SELECT deptno, dname, loc -- Changed
, MAX (DECODE (rn, 1, job)) AS job_1
, MAX (DECODE (rn, 1, max_sal)) AS sal_1
, MAX (DECODE (rn, 2, job)) AS job_2
, MAX (DECODE (rn, 2, max_sal)) AS sal_2
, MAX (DECODE (rn, 3, job)) AS job_3
, MAX (DECODE (rn, 3, max_sal)) AS sal_3
FROM (
SELECT deptno, dname, loc -- Changed
, job
, max_sal
, ROW_NUMBER () OVER ( PARTITION BY deptno -- , dname, loc -- Changed
ORDER BY max_sal DESC
) AS rn
FROM (
SELECT e.deptno, d.dname, d.loc -- Changed
, e.job
, MAX (e.sal) AS max_sal
FROM scott.emp e
, scott.dept d
WHERE e.deptno = d.deptno
AND e.job IN ('ANALYST', 'CLERK', 'MANAGER')
GROUP BY e.deptno, d.dname, d.loc -- Changed
, e.job
GROUP BY deptno, dname, loc -- Changed
;Actually, you can keep using just deptno in the analytic PARTITION BY clause. It might be a little more efficient to just use deptno, like I did above, but it won't change the results if you use all 3, if there is only 1 danme and 1 loc per deptno.
By the way, you don't need so many sub-queries. You're using the inner sub-query to compute the MAX, and the outer sub-query to compute rn. Analytic functions are computed after aggregate fucntions, so you can do both in the same sub-query like this:
SELECT deptno, dname, loc
, MAX (DECODE (rn, 1, job)) AS job_1
, MAX (DECODE (rn, 1, max_sal)) AS sal_1
, MAX (DECODE (rn, 2, job)) AS job_2
, MAX (DECODE (rn, 2, max_sal)) AS sal_2
, MAX (DECODE (rn, 3, job)) AS job_3
, MAX (DECODE (rn, 3, max_sal)) AS sal_3
FROM (
SELECT e.deptno, d.dname, d.loc
, e.job
, MAX (e.sal) AS max_sal
, ROW_NUMBER () OVER ( PARTITION BY e.deptno
ORDER BY MAX (sal) DESC
) AS rn
FROM scott.emp e
, scott.dept d
WHERE e.deptno = d.deptno
AND e.job IN ('ANALYST', 'CLERK', 'MANAGER')
GROUP BY e.deptno, d.dname, d.loc
, e.job
GROUP BY deptno, dname, loc
;This will work in Oracle 8.1 and up. In Oracle 11, however, it's better to use the SELECT ... PIVOT feature. -
How I can change my staff from one IPad To a New one
Please I need To know how I can change my staff To a New IPad , I have 3 generation i pad and I just bought an IPad air
Back them up to iCloud or a computer running the lastest version of iTunes. Give them unique names, and restore the proper back-up to each new device.
Maybe you are looking for
-
How to change Number of test socket in Model option during run-time
I wanna be able to change the the number of test sockets(in the Model Options menu) during runtime. I have overriden the Prebatch callback and used my own instead. I have a LabView program in my Prebatch where I would select the test script each time
-
Hi everyone, i have a screen with four drop down by keys and an alv...i get a dump saying ASSERT error on every third click on the screen.This click could just be scrolling the alv.Also note the dump happens only when the ALV has some data in it.No o
-
Photobooth not playing video back
Hi, so I just upgraded from Lion to Mountain Lion. I recorded a video in Photobooth, but when I tried to play it back, all I got was a blank, black screen and no audio either. Photographs are fine, it's just videos. I tried opening the video in iMovi
-
Make Album List view default for playlists
I have my library broken up with playlists for each artist and I like to view the contents of each playlist in Album List view. iTunes remembers when you switch to this view, but after upgrading to iTunes 10 all playlists are back to list view, and i
-
IOS 5.1 Exchange Password Issue
I have searched and read serveral forums lately about this issues however I've been unable to figure out a soultion. It seems every morning the iOS 5 will get a password prompt saying the exchange password is incorrect. When I go to work and connec