How i can force sql developer to show just tables of HR schema ?
In sql developer we can filter the tables that it shows under table node ,
how i can force it just to show tables of HR schema ?
Thanks
See my post in your other thread (How i can deal with DB schema in SQL developer ?
In this case, you let only the HR user in the right panel.
Similar Messages
-
How I can force to Catalyst 3750G to work like SLAVE
Hi,
Help me, how I can force to Catalyst 3750G to work like SLAVE, I can't find the command..Hello Friend
You have to set the slave switch's priority to be lower than the master switch.
3750-Stk>show switch
Current
Switch# Role Mac Address Priority State
1 Slave 0016.4748.dc80 1 Ready
*2 Master 0016.9d59.db00 5 Ready
This following link is a good read
http://www.cisco.com/en/US/products/hw/switches/ps5023/products_configuration_example09186a00807811ad.shtml#pval
Thanks
Suresh -
How to solve Oracle SQL Developer connection problem ?
Folks,
Hello. I am using Oracle Database 11gR1. The Database Control Console https://localhost.localdomain:1158/em works correctly. I can create a Database and a table successfully.
My OS is Linux and connects to internet successfully.
In order to run SQL statements. we need to use Oracle SQL Developer. I connect Oracle SQL Developer in the following way:
Connection Name: DB1 (this is my database name as well)
Username: SYS (this is the user name I used to login to the Console)
Password: SYS (this the password used to login to the Console)
Connection Type: Basic
Host Name: localhost
Port: 1158
SID: DB1 (this is created during installing the Database)
But the error message comes up: "Status: Failure - IO exception Connection Reset."
Can any folk tell me how to solve Oracle SQL Developer connection problem ?user8860348 wrote:
Folks,
Hello. I am using Oracle Database 11gR1. The Database Control Console https://localhost.localdomain:1158/em works correctly. I can create a Database and a table successfully.
My OS is Linux and connects to internet successfully.
In order to run SQL statements. we need to use Oracle SQL Developer. I connect Oracle SQL Developer in the following way:
Connection Name: DB1 (this is my database name as well)
Username: SYS (this is the user name I used to login to the Console)
Password: SYS (this the password used to login to the Console)
Connection Type: Basic
Host Name: localhost
Port: 1158
SID: DB1 (this is created during installing the Database)
But the error message comes up: "Status: Failure - IO exception Connection Reset."
Can any folk tell me how to solve Oracle SQL Developer connection problem ?username: sys
password: enter_your_correct_password given at the time of oracle installation
role: select sysdba if you would connect as sysdba else select normal for users other than sys
hostname: enter your oracle server hostname or ip address eg:- 192.168.11.12
to find the hostname open terminal/command prompt in oracle installed machine
type ---> hostname
type ---->ping hostname
you can find the ipaddress of the server
port number: 1521 (default) ----> i guess , else check the port number in the tnsnames.ora file under your ORACLE_HOME/network/admin folder
SID: DB1
try it
Good Luck -
Force SQL Developer 1.5.4 to export data on 1 XLS workSheet
Hello.
I'm using SQL Developer 1.5.4 to export data into XLS format.
The exported file is about 40MB big.
During the export, I have noticed that SQL Developer splits the data into several worksheets, having about 64,001 rows each.
Please, is there any way I could force SQL Developer to have all of the data on a singke WorkSheet?
Thanks.I'm just guessing, but I suspect that the 64,000 row limit is so the resulting XLS file can be opened in Excel 2003 or earlier. Excel 2003 has a limit of ~65,536 (2^16) rows in a worksheet. Even if you were to export as a CSV or Text (tab-delimited) file and try loading it into Excel, it would choke and quit once the worksheet limit had been reached.
Ed. H. -
How i can force a portlet of JSC to accept portal theme ?
Hi
Thank you for reading my post.
is there any way to force the portlet to accept the portal theme ?
for example i developed the portlet using JSC and it has blue them , now it should accept the them that portal administrator or user select from themes available in portal.
so ,
How i can force a JSC portlet to accept the portal them?
Thank youThank you for reply.
is there any solution, workaround ,.... for now ?
What about the time that a patch , fix come available ?
is it in next one month ?
without that portlet development does not go anywhere because people can not design a them for portlet and Portal separately.
Thank you. -
How I can run SQL*PLUS?
On my notebook is instaled Oracle Client and Oracle SQL Developer. It is working correctly. I can connect to the Oracle DB on the Unix server so that my tnsnames.ora is correctly. But I don't know, how I can start SQL*PLUS on my client machine.
Thanks in Advance :)hello
did you mean to connect only to SQL * or to connect as sysdba?
if your anwser is to connect only as normal user, then follow the above
but in case you are looking to connect to the database server (Linux) from your laptop you have to connect to the server firest as root or the db user,
then you can access oracle sql plus using terminal such as PUTTY (search in google it's free) look at this:
[applprod@applprod 9.2.0]$ pwd
/d01/oracle/proddb/9.2.0
[applprod@applprod 9.2.0]$ sqlplus
SQL*Plus: Release 9.2.0.6.0 - Production on Wed Oct 10 13:46:18 2007
Copyright (c) 1982, 2002, Oracle Corporation. All rights reserved.
Enter user-name:
Now what do you think?
if you are looking to connect as sysdba, i think must from the termianl
Regards
Mohamed Tawfik -
Yahoo is my home page and News, Sports, Business categories/links changed and now shows a few sentences after each main URL link/topic. How do I put it back to show just the URL links/topics without having to scroll down and down the page. All the extra sentences after the links causes too much scrolling to view the topics.
Those steps did not solve my problem. Here is an example of what I see although it's not exact copy/paste. All I want to see are the links but I get all the verbiage after the links
Firefox 17.0.1 version
''' '''Ask Stacy: How Can I Rebuild My Credit?''''''
Here’s a question familiar to millions of Americans… Stacy, My wife and I recently filed for bankruptcy due to high medical bills we were unable to pay. We purposefully didn’t add our Wells Fargo credit ...
Money Talks News
'''Analysis: High stakes for Cuba in Chavez's cancer battle'''
HAVANA (Reuters) - As Venezuelan President Hugo Chavez recovers in Havana from his fourth cancer operation, Cubans face renewed worries about their economic future if the country's top ally dies or has to step down from office. Cuba has staked its economic well-being on the success - and generosity…
41 mins agoReuters
[$$] Playing FICC or Treat With Bank Investors
'''Playing FICC or Treat With Bank Investors'''
The Wall Street Journal
AdChoices
'''Cybergeddon
A digital crime thriller from Anthony E. Zuicker, the creator of CSI. Only on Yahoo!
And here is what Internet Explore shows: All LINKS below
'''Molten gold signals mining's return to Calif.'s Mother Lode'''
'''Century-old fight for Budweiser name hits new snag'''
'''NRA goes silent after Connecticut school shooting'''
'''.Authorities: Kansas man who killed 2 cops dies''' -
How to identify the SQLs which are using the tables and new columns
Hi
I m using oracle 10G Database in windows. Developers have added some columns in some of the database tables and were asking to check whether there is some impact on performance or not. I have not done this performance tuning before. Kindly help me how to proceed further.
How to obtain the sqls which are touching the tables and the new columns? It would be really great if you can help me with this.
ThanksYou can try to use DBA_DEPENDENCIES to get PL/SQL objects using tables: http://download.oracle.com/docs/cd/B19306_01/server.102/b14237/statviews_1041.htm#i1576452.
However if SQL code is not stored in database in a trigger, a procedure, a function, a package or a view, it is impossible to retrieve all SQL code referencing some table from database dictionary: for this you would have to analyze application source code. -
How we can attach search help directly to the table field / structure field
Hi All,
Can you please let me know the step by step procedure of How we can attach search help directly to the table field / structure field.
Regards,
jayaHi Jaya,
1. Create a search help using SE11.
2. Include this search help in the field of table in SE11. There is a tab in the table defination where you can specify the search help.
Even you can specify search help at data element level, screen field level.
Reward points if useul.
Regards,
Atish -
How i can keep my code after %dba standard table in sap query
hi expert,
how i can keep my code after %dba standard table in sap query..
add 1 to %count-VBRP.
%linr-VBRP = '01'.
extract %fg01.
%linr-VBRP = '02'.
extract %fg02.
%linr-VBRP = '04'.
extract %fg04.
%linr-VBRP = '05'.
extract %fg05.
%ext-VBRP05 = 'X'.
extract %fgwrVBRP05.
endselect.
i want keep my code after filling the standard table generated by sap abap query
Thanks & regards
Sajad AhmadHi,
the above code is excuted succesfully, but if i have
return "Navigation" ;
it is not working
any idea why?????????? -
How I can change visible property of an af:table with an af:selectOneRadio?
How I can change visible property of an af:table with an af:selectOneRadio? Anyone can help me with a tutorial, example or link?
Thanks in advance.After you add the required libraries to your classpath
you can do your use case as explained in this sample
page source
<?xml version='1.0' encoding='UTF-8'?>
<!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd">
<f:view xmlns:f="http://java.sun.com/jsf/core" xmlns:af="http://xmlns.oracle.com/adf/faces/rich">
<af:document title="untitled2.jsf" id="d1">
<af:messages id="m1"/>
<af:form id="f1">
<af:selectOneRadio label="radio" id="sor1" autoSubmit="true"
valueChangeListener="#{ControlVisibilty.onRadioSelected}">
<af:selectItem label="0" value="0" id="si1"/>
<af:selectItem label="1" value="1" id="si2"/>
</af:selectOneRadio>
<af:table value="#{bindings.DepartmentsView1.collectionModel}" var="row"
rows="#{bindings.DepartmentsView1.rangeSize}"
emptyText="#{bindings.DepartmentsView1.viewable ? 'No data to display.' : 'Access Denied.'}"
fetchSize="#{bindings.DepartmentsView1.rangeSize}" rowBandingInterval="0"
selectedRowKeys="#{bindings.DepartmentsView1.collectionModel.selectedRow}"
selectionListener="#{bindings.DepartmentsView1.collectionModel.makeCurrent}" rowSelection="single"
id="t1" partialTriggers="::sor1" visible="#{ControlVisibilty.table}">
<af:column sortProperty="#{bindings.DepartmentsView1.hints.DepartmentId.name}" sortable="false"
headerText="#{bindings.DepartmentsView1.hints.DepartmentId.label}" id="c1">
<af:inputText value="#{row.bindings.DepartmentId.inputValue}"
label="#{bindings.DepartmentsView1.hints.DepartmentId.label}"
required="#{bindings.DepartmentsView1.hints.DepartmentId.mandatory}"
columns="#{bindings.DepartmentsView1.hints.DepartmentId.displayWidth}"
maximumLength="#{bindings.DepartmentsView1.hints.DepartmentId.precision}"
shortDesc="#{bindings.DepartmentsView1.hints.DepartmentId.tooltip}" id="it1">
<f:validator binding="#{row.bindings.DepartmentId.validator}"/>
<af:convertNumber groupingUsed="false"
pattern="#{bindings.DepartmentsView1.hints.DepartmentId.format}"/>
</af:inputText>
</af:column>
<af:column sortProperty="#{bindings.DepartmentsView1.hints.DepartmentName.name}" sortable="false"
headerText="#{bindings.DepartmentsView1.hints.DepartmentName.label}" id="c2">
<af:inputText value="#{row.bindings.DepartmentName.inputValue}"
label="#{bindings.DepartmentsView1.hints.DepartmentName.label}"
required="#{bindings.DepartmentsView1.hints.DepartmentName.mandatory}"
columns="#{bindings.DepartmentsView1.hints.DepartmentName.displayWidth}"
maximumLength="#{bindings.DepartmentsView1.hints.DepartmentName.precision}"
shortDesc="#{bindings.DepartmentsView1.hints.DepartmentName.tooltip}" id="it2">
<f:validator binding="#{row.bindings.DepartmentName.validator}"/>
</af:inputText>
</af:column>
<af:column sortProperty="#{bindings.DepartmentsView1.hints.ManagerId.name}" sortable="false"
headerText="#{bindings.DepartmentsView1.hints.ManagerId.label}" id="c3">
<af:inputText value="#{row.bindings.ManagerId.inputValue}"
label="#{bindings.DepartmentsView1.hints.ManagerId.label}"
required="#{bindings.DepartmentsView1.hints.ManagerId.mandatory}"
columns="#{bindings.DepartmentsView1.hints.ManagerId.displayWidth}"
maximumLength="#{bindings.DepartmentsView1.hints.ManagerId.precision}"
shortDesc="#{bindings.DepartmentsView1.hints.ManagerId.tooltip}" id="it3">
<f:validator binding="#{row.bindings.ManagerId.validator}"/>
<af:convertNumber groupingUsed="false"
pattern="#{bindings.DepartmentsView1.hints.ManagerId.format}"/>
</af:inputText>
</af:column>
<af:column sortProperty="#{bindings.DepartmentsView1.hints.LocationId.name}" sortable="false"
headerText="#{bindings.DepartmentsView1.hints.LocationId.label}" id="c4">
<af:inputText value="#{row.bindings.LocationId.inputValue}"
label="#{bindings.DepartmentsView1.hints.LocationId.label}"
required="#{bindings.DepartmentsView1.hints.LocationId.mandatory}"
columns="#{bindings.DepartmentsView1.hints.LocationId.displayWidth}"
maximumLength="#{bindings.DepartmentsView1.hints.LocationId.precision}"
shortDesc="#{bindings.DepartmentsView1.hints.LocationId.tooltip}" id="it4">
<f:validator binding="#{row.bindings.LocationId.validator}"/>
<af:convertNumber groupingUsed="false"
pattern="#{bindings.DepartmentsView1.hints.LocationId.format}"/>
</af:inputText>
</af:column>
</af:table>
</af:form>
</af:document>
</f:view>The managed bean code is
import javax.faces.event.ValueChangeEvent;
public class ControlVisibilty {
private boolean table;
public ControlVisibilty() {
setTable(false);
public void onRadioSelected(ValueChangeEvent valueChangeEvent) {
// Add event code here...
if(valueChangeEvent.getNewValue().toString().equals("1"))
setTable(true);
else
setTable(false);
public void setTable(boolean table) {
this.table = table;
public boolean isTable() {
return table;
} -
How to force sql developer to prompt for user input for every execution ?
Hi Folks,
Environment: Oracle 11g (on Windows 7)
SQL Developer: *3.1.07*
I am executing a PL/SQL code off Sql Developer. The code uses substitution variables to prompt user for input. However,I am only prompted for the user input for the very first run of the code. For the subsequent executions, the code simply picks up the user input from the very first run. This behavior persists for all subsequent runs of the code.
I have executed the same piece of code from SQL*PLUS and the behavior seems normal (i.e. I am prompted for fresh input for every execution)
How can flush out the old user input so I can be prompted for new user input for every run of the code in sql developer?
Thanks in advance
rogers42Hi Rogers42,
1/try
undefine
undefine fred
select '&&fred' from dual;
[run this multiple times]
[prompts gere]
old:select '&&fred' from dual
new:select 'a' from dual
'A'
a
[prompts here]
old:select '&&fred' from dual
new:select 'b' from dual
'B'
b
2/try
exit (requires recent version of sql developer: tools->preferences->Database->worksheet->Re-initialize on script exit command)
select '&&fred' from dual;
exit
run this multiple times
[prompts here]
old:select '&&fred' from dual
new:select 'x' from dual
'X'
x
Commit
[prompts here]
old:select '&&fred' from dual
new:select 'y' from dual
'Y'
y
Commit
3/use &fred instead of &&fred
For background see
http://totierne.blogspot.co.uk/2010/04/substitution-and-bind-variables.html
-Turloch
SQLDeveloper team -
Help how to connecting Oracle SQL Developer 3.0 with Oracle Database 11g
Hello,
I'm new in oracle developer yesterday i setup in my laptop database 11g the last version (11.2.0.1.0), well i follow steps still i got succeed to install, and i got my local host URL and i test my user name and password work very well, my problem now is i try to connect database 11g using Oracle SQL Developer 3.0 (3.0.04.34) but always filed and with my little experience i don't know where the wrong. as i said i test database after finish install is work fine the my URL is https://Ahmed-HP:1158/em and i test my username and password that i already set before is enter normal in my local database, please i need help to know how i connect database with Oracle SQL Developer 3.0 (3.0.04.34).
Thanks,885173 wrote:
EdStevens, thanks for your quick answer, sorry for my explain was doesn't clear, i open oracle sql developer and choose new connection i set connection name system_orcl username:system password:*i set my password that i create when i setup database*
-Now the link that i got after finish install database is https://Ahmed-HP:1158/em so i have question about this point Hostname and port if the link to access database is this https://Ahmed-HP:1158/em so this mean i typing at Hostname:localhost and port:1158 ?
because the message when i test connection always is filed and I'm sure i typing username and password and SID:orcl as i set when install database.port 1158 is what the dbcontrol (Oracle Enterprise Manager) is listening on. OEM is NOT the database. As far as the database is concerned, OEM is "just another client".
Actually, the database doesn't listen for requests on any port. There is another process, the "listener" that listens for requests to connect to the database. Typically, it listens on port 1521. You should have a tnsnames.ora file set up to resolve a connection request to the correct host. You can read more on this at http://edstevensdba.wordpress.com/2011/02/09/sqlnet_overview/ -
Host variables in SQL Developer not showing decimal places
I'm a very newbie, taking my first PL/SQL class, so please be gentle! I think this may be a SQL Developer problem, because when I run the same thing from terminal-line SQLplus on my Linux install, it works right.
I'm working with a procedure, and passing a value out to a host variable. Although the value should have a decimal portion, when I print the host variable, all that prints is the integer portion.
Here's the entire program:
set serveroutput on;
create or replace package mypkg
is
procedure myproc
(p_in in number,
p_out out number);
end;--END package mypkg
create or replace package body mypkg
is
procedure myproc
(p_in in number,
p_out out number)
is
lv_out_num number(7,2);
begin
lv_out_num := p_in / 10.0;
p_out := lv_out_num;
dbms_output.put_line('p_out is ' || to_char(p_out,'999.99' ));
end;--END procedure myproc
end;--END package body mypkg
variable myvar number
execute mypkg.myproc(33,:myvar);
print :myvarAnd here's the output:
PACKAGE mypkg compiled
PACKAGE BODY mypkg compiled
anonymous block completed
p_out is 3.30
MYVAR
3As you can see, myvar should be 3.3, but it only shows 3. However, like I said above, when I do this from sqlplus from a terminal in linux, it works fine. Thus I'm thinking its a SQL Developer thing.
Details:
Machine:
HP Pavilion dv6 notebook (Core i7) with 8 GB RAM
Windows side:
Windows 7 Home Premium SP1
Oracle 10g Express
SQL Developer 3.1.06
Linux side:
Oracle Linux 5.6 (in Virtualbox)
Oracle 11g release 1
Thanks,
AlexHi,
This issue has been previously reported on and bugged:
Re: Oracle Sql Developer prblem with variable format
Regards,
Gary -
How run Procedure in SQL Developer?
I need run procedure in SQL Developer with parameter : 2009
create or replace PROCEDURE "update_table" (ff_year in varchar2) AS
CURSOR c_update IS
select DISTINCT P.mafew name, u.frew nameone, t.greddf, .........
I click green button RUN and have new window Run PL/SQL. Where in this script I need to print 2009?
DECLARE
FF_YEAR VARCHAR2(200);
BEGIN
FF_YEAR := NULL;
update_table(
FF_YEAR => FF_YEAR
END;Hi,
user10886774 wrote:
Thanks all!
I can run the procedure like 1 or 2 example? Is it right?
1 like Run Script
EXEC "UPDATE_TABLE" ('2009');
2 click RUN on UPDATE_TABLE procedure
DECLARE
FF_YEAR VARCHAR2(200);
BEGIN
FF_YEAR := '2009';
UPDATE_TABLE(
FF_YEAR => FF_YEAR
END;
What is the name of the procedure?
Is it update_tabe (all small letters)? If so, you must reference it as "update_table" (all small letters, inside double-quotes).
Is it UPDATE_TABLE (all capital letters)? If so, you have the choice of referencing it as "UPDATE_TABLE" (all capital letters, inside double-quotes) or as update_table, or Update_Table, or UPDATE_TABLE, or uPdAtE_taBle, or ... (any kind of letters, without quotes).
How about commit after?How about it?
What is the question?
If you want to commit, say COMMIT or click on the COMMIT icon.
Maybe you are looking for
-
Error: cannot be resolved to type
Hi Guys, I downloaded an application to launch an RTP client/server but I cannot compile it, yhe error message is below: vmplanet@vmplanet-desktop:~/JavaRTP/playerv1$ make javac Client.java 1. ERROR in Client.java (at line 306) RTPpacket rtp_pac
-
Can I scan 110 film negatives on the canoscan 9000f?
I am contemplating buying the canoscan 9000f, but I will need to be able to scan 110mm film format. Can I do this on the canoscan 9000f? I have seen an adapter for that film size on ebay and amazon (oddly enough, cannot find it on Canon), but the pri
-
Change number of periods to be displayed on graphics.
Hi Experts, When viewing the bar graph of any KPI, always shows the total periods is loaded. (See attached image) There any way to customize the amount of periods to display?. Thanks! Ariel Crovetto.
-
How can i uninstall the trial version of illustrator off my computer (mac)?
I'd like to be able to uninstall the trial version of illustrator off of my mac, so that i can redownload it and actually try it, as i didn't get a chance to trial it the first time! Help Please!!
-
Graphics while waiting for page load
Hi all, can I show a graphics while the user waits for page load. I want to show the same circular wait icon that is shown inside the EP. Thanks, Satyajit.