How is ENET-232/4 Supported Now that NI-Serial 14.0 has Removed Support for ENET?

Dear smarter people than me, I have been pulling my hair out trying to get my brand new ENET-232/4 units running under the lastest and greatest LabVIEW envirenment (2014).
After finding that none of the instruction matched what I was seeing in MAX etc, I discovered the following line in the NI-Serial 14.0 driver release notes;
Release Notes
Removed ENET support
NI-Serial 14.0 removes support for all NI Serial ENET Interfaces (ENET-232/2, ENET-232/4, ENET-485/2, and ENET-485/4).
So my question is if NI-Serial no longer supports or configures the ENET-232/4, then what does? At the moment I just have 5 rather exspensive boxes sitting on the shelf unable to be configured.
Smart brains please help
Dave

Hi Dave,
As per the NI-Serial 14.0 Readme, as you have already discovered, support for all NI Serial ENET devices has been removed. This is a result of the NI Serial ENET devices being discontinued. As mentioned by Michel_Gauvin, the NI Serial ENET devices can be used without the presence of the NI-Serial driver on the system. Instructions for using NI Serial ENET devices via the NI-VISA driver can be found in this KnowledgeBase. As a note, the ENET device will still need to be configured on a system that has NI-Serial with ENET support. My recommendation would be to stick with NI-Serial 4.1 for ease of use and configuration if you plan on continuing to use the ENET devices.
Michel,
Changes to your LabVIEW code could be required when moving to a 64-bit Windows operating system. One change that may be required is the "VISA resource name" input because MAX will not discover/show the NI Serial ENET device on the 64-bit OS, so if an alias was being used during development it would not be recognized when moved over.
Best,
Jake B.

Similar Messages

How can I burn a dvd now that I can't download premiere pro cs6 with Encore?

How can I burn a dvd now that I can't download premiere pro cs6 with Encore?

Here's what you do to get Premiere CS6 + Encore:
Just click here (it's the same link as the more information link in CC.)
or
Go to your Creative Cloud application (on the menu bar) and go to Adobe Premiere CC and click more information
There is a dropdown menu that says "Adobe Premiere Pro CC" near the top.
Click it and the other option is "Adobe Premiere Pro CS6." Select that.
Now on the top right corner of the page it has a download button that says "Download Adobe Premiere Pro CS6."
It is included in your CC subscription.
However, a word of warning, you cannot use Adobe Dynamic Link to link to a Premiere CC sequence directly in Encore. A CS6 sequence still works fine, but if you have a CC project, you will need to encode your sequence into a DVD friendly format (MPEG2 file). I'm really hoping that Adobe changes this in their upcoming release, and just adds the ability to import CC sequences into Encore, then I would be fine with them not including it in the normal CC package, or updating it. But I haven't seen anything about it in the release notes.
A lot of people still want their DVDs and it's a lot easier to just dynamically link the sequence.

I keep getting an error on my MAC when i try to open any and all JPG FILES. How do I correct Adobe Reader could not open 'images rest 12-4.jpg' because it is either not a supported file type or because the file has been damaged (for example, it was sent

Adobe Reader could not open 'images rest 12-4.jpg' because it is either not a supported file type or because the file has been damaged (for example, it was sent as an email attachment and wasn't correctly decoded).
that is the message how do i correct this problem

It sounds like your file associations are messed up and Reader is trying to open your .jpg files. Is this correct?
If so, you just need to change the associations to choose what application opens them. Here's how: Change File Associations in Mac OS X

Have recently updated Adobe Reader and now unable to open downloaded documents - Message received is could not open 'file name.pdf' because it is either not a supported file type or because the file has been damaged (for example, it was sent as an email a

Have recently updated Adobe Reader and now unable to open downloaded documents - Message received is could not open 'file name.pdf' because it is either not a supported file type or because the file has been damaged (for example, it was sent as an email attachment and wasn't correctly decoded). When I check the file it shows Zero KB downloaded but the file appears - any suggestions?

Obviously your download was not successful.
What is your operating system? How exactly do you download such files?

I tried restoring my iMac 27" slim. I followed the steps erased my data then to reinstall osx mavericks. Now that I'm trying to reinstall osx mavericks for whatever reason it doesn't completes. Can you help me out?

I tried restoring my iMac 27" slim. I followed the steps erased my data then to reinstall osx mavericks. Now that I'm trying to reinstall osx mavericks for whatever reason it doesn't completes. Can you help me out?

That's not quite the proper way as far as I can tell. Usually, one boots directly into the Recovery HD using COMMAND and R keys at startup. If you cannot do that then most likely there is a problem with the hard drive. Since this is a new computer i would make a Genius Appointment and take it in for service.

I lost my redemption code to install Lion onto my new computer. Is there a way I could get it again? When I go to the "get the update" page, it says that my serial number already has a code. How do I find this code again?!

I lost my redemption code to install Lion onto my new computer. Is there a way I could get it again? When I go to the "get the update" page, it says that my serial number already has a code. How do I find this code again?!

It is probably broken. You can try restoring it using Recovery Mode, but if that fails its time for a new phone. After all, it is 4 generations out of date. See: Recovery Mode

Now that the new macbook pro has usb 3.0, is there a way to convert my current macbook's usb 2.0 to 3.0?

Now that the new macbook pro has usb 3.0, is there a way to convert my current macbook's usb 2.0 to 3.0?

No you can not.
You can connect USB 3 components to you MB if you wish to use them but will only run at USB 2 specs.

Mac won't open some files MasterPlan.pdf' because it is either not a supported file type or because the file has been damaged (for example, it was sent as an email attachment and wasn't correctly decoded).

I had this problem of not being able to open some files a couple of years ago and eventually was able to fix it but i can't remember how. Any help would be grateful.

The following document should help: Error: Adobe Reader could not open '*.pdf' because it is either not a supported file type or because the file has been damaged (for example, it was sent as an email attachment and was not correctly decoded.)
Please update this thread if your issue is resolved.
Thanks,
Shashi

Why can't I open a pdf file on my desktop? I keep getting this message: Adobe Reader could not open '8pdk_96_4.pdf' because it is either not a supported file type or because the file has been damaged (for example, it was sent as an email attachment and w

Why can't I open a pdf file on my desktop? I have Adobe Reader and running OS 10.10.1 I keep getting the same message: "Adobe Reader could not open '8pdk_96_4.pdf' because it is either not a supported file type or because the file has been damaged (for example, it was sent as an email attachment and wasn't correctly decoded)."

I tried that.
I saved the file 8pdk_96_4.pdf to my desktop and tried to open it using Adobe Reader but I get the same message: Adobe Reader could not open '8pdk_96_4.pdf' because it is either not a supported file type or because the file has been damaged (for example, it was sent as an email attachment and wasn't correctly decoded).

Adobe Acrobat Reader DC could not open 'Hilti DCG 125-S Angle Grinder.pdf' because it is either not a supported file type or because the file has been damaged (for example, it was sent as an email attachment and wasn't correctly decoded).

trying to open a file i have downloaded and it comes up with this responce
Adobe Acrobat Reader DC could not open 'Hilti DCG 125-S Angle Grinder.pdf' because it is either not a supported file type or because the file has been damaged (for example, it was sent as an email attachment and wasn't correctly decoded).

Here are three documents that i down loaded, there are others
John Buckley
5 Sunmead Walk
Cherry Hinton
Cambridge
CB1 9YB
07411142946
0845 3881751
[email protected]
www.cambridgeriskmanagement.com
Cambridge Risk Management Limited is a trading name of Comply UK Cambridge

Using Maverick, error message: Adobe Reader could not open '***.pdf' because it is either not a supported file type or because the file has been damaged (for example, it was sent as an email attachment and wasn't correctly decoded).

Receiving error message using current Maverick version: "Adobe Reader could not open '***.pdf' because it is either not a supported file type or because the file has been damaged (for example, it was sent as an email attachment and wasn't correctly decoded).". Is fix the same as on previous OS versions?

Back up all data before making any changes. Please take each of the following steps until the problem is resolved.
Step 1
If Adobe Reader or Acrobat is installed, and the problem is just that you can't print or save PDF's displayed in Safari, you may be able to do so by moving the cursor to the the bottom edge of the page, somewhere near the middle. A black toolbar should appear under the cursor. Click the printer or disk icon.
Step 2
There should be a setting in its preferences of the Adobe application such as Display PDF in Browser. I don't use those applications myself, so I can't be more precise. Deselect that setting, if it's selected.
Step 3
If you get a message such as ""Adobe Reader blocked for this website," then from the Safari menu bar, select
Safari ▹ Preferences... ▹ Security
and check the box marked
Allow Plug-ins
Then click
Manage Website Settings...
and make any required changes to the security settings for the Adobe PDF plugin.
Step 4
Triple-click anywhere in the line of text below on this page to select it, the copy the selected text to the Clipboard by pressing the key combination command-C:
/Library/Internet Plug-ins
In the Finder, select
Go ▹ Go to Folder
from the menu bar, or press the key combination shift-command-G. Paste into the text box that opens by pressing command-V, then press return.
From the folder that opens, move to the Trash any items that have "Adobe" or “PDF” in the name. You may be prompted for your login password. Then quit and relaunch Safari.
Step 5
The "Silverlight" web plugin distributed by Microsoft can interfere with PDF display in Safari, so you may need to remove it, if it's present. The same goes for a plugin called "iGetter," and perhaps others—I don't have a complete list. Don't remove Silverlight if you use the "Netflix" video-streaming service.
Step 6
Do as in Step 4 with this line:
~/Library/Internet Plug-ins
If you don’t like the results of this procedure, restore the items from the backup you made before you started. Relaunch Safari.

Why does my airport wifi icon now say "No Hardware installed" It has been working for ever

Why does my airport wifi icon now say "No Hardware installed" It has been working for ever

This message comes up when your Mac no longer recognizes that there is an operational AirPort card installed. This can be due to a number of reasons, including card or antenna cabling failure.
You can try either a PRAM or SMC reset. Which you choose will depend on the exact model of your Mac, but most likely, a visit to your local Apple Store is in order.

I bought an ebook but when I try to download it I receive a message stating 'Adobe reader could not open .....acsm because it is either not a supported file type or because the file has been damaged (for example, it was sent as an email attachment and wa

Can anyone assist me? I keep receiving this message when I download my ebook ''Adobe reader could not open .....acsm because it is either not a supported file type or because the file has been damaged (for example, it was sent as an email attachment and wasn't decoded).'
Much appreciated

I think you should ask in the Digital Editions forum, Adobe Digital Editions

I am trying to set up iTunes match on my apple tv, but it just keeps showing that it is loading, it has been running for over an hour, what can be done here, it has gone with no problem on my iPhone, iPad but not the tv

i am trying to set up iTunes match on my apple tv, but it just keeps showing that it is loading, it has been running for over an hour, what can be done here, it has gone with no problem on my iPhone, iPad but not the tv

Same here and this is driving me crazy. I can buy, but can't upgrade. Grrr.

When I try to open a PDF downloaded from Adobe DC I get an error message:Adobe Acrobat Reader DC could not open 'nrneph.2015.33.pdf' because it is either not a supported file type or because the file has been damaged (for example, it was sent as an email

When I try to download a PDF from Adobe DC, I get an error message: "Adobe Acrobat Reader DC could not open 'nrneph.2015.33.pdf' because it is either not a supported file type or because the file has been damaged (for example, it was sent as an email attachment and wasn't correctly decoded)"
I am using a Macbook Pro, OSX 10.9.5, Safari browser. Previous versions of Adobe Acrobat have worked fine for years.
WGC

What's the name of the file you are attempting to open? Is it "ScreenFlow_4.5.2.dmg"? If it is the correct name then the message is correct and you are attempting to open a file with DMG files extension and not one with a PDF file extension. Adobe Reader opens PDF files an not any other file type.

How is ENET-232/4 Supported Now that NI-Serial 14.0 has Removed Support for ENET?

Similar Messages

Maybe you are looking for