How is it possible to have 4 buttons for fast forward/reverse in iTunes?

Hi,
I want 4 Buttons for fast forward/reverse. So 2 Butoons for next/previous track and 2 buttons for +10/-10 seconds. How is it possible? It sure is...

Hi,
Try to combine your declarations.
     .newStyle {
font-size: 50;
       text-decoration: underline;
<mx:Label name="UserName" width="80" x="89" y="80" text="UserName" styleName="newStyle">

Similar Messages

  • How to change color of a button for specific time interval in jsp

    How to change color of a button for specific time interval in jsp.
    Please help.
    Thanks in advance.

    This was driving me crazy, too--and the previous answers did not seem to work. I eventually found that if I click one of the data symbols in the graph in exactly the right spot (see below), it selects only the data symbols and not the line. I can tell this because the little selection dots will be around each data symbol, but no selection dots will be on the line between the data symbols - like the graphic in Yvan's answer. Then and only then will the color symbol in the tool bar show the color of the data symbol, instead of the color of the line. I believe that you then have to first click on the color swatch in the toolbar and then select your color (or choose Show Colors and select from the color tool). Just clicking a color in the crayon box, for example, did not seem to work unless I first clicked on the color swatch in the toolbar, then clicked Show Colors on that dropdown, and +only then+ clicked the crayon or whatever.
    _The right spot to click_ seems to be just above the exact center of the data symbol, at least for the diamond shape symbol that I prefer. Sometimes it takes several tries to hit the right spot. If I miss it, the whole line is selected, which is indicated by the little selection dots on the line, between the data symbols. When I click the right spot, those selection dots go away, leaving only the data symbols selected. Then I can change the color, as described above.
    I hope this works for you too.

  • Possible to have Button Descriptions?

    I am wondering if it is possible to have buttons on a menu that when a person were to cycle through it, another text box or image on the screen would change to describe the button.
    Thanks

    In a flash/director pop-up way, not really, but you can use
    1.) Layered Menus (there are many discussions here about that, and most avoid them for tecchincal reasons.)
    2.) Use an overlay so when a button is selected additional text is shown (all buttons are square/rectangle)
    Few ways to approach it. The easiest way is to place thee buttons text on the background image then make an overlay so that the button AND description are on it, and set the button to cover both (asssuming you want the button to change also, otherwise you can just have the description.)
    Have DVD SP 3 open right now so Chapter 7 in thee online help shows more what I am writing about (look for Advanced Overlay Color Maapping)

  • Is it possible to have listener for orcale shut won event ?

    Hi,
    We know that during normal shut down of the oracle database, message is sent to the clients. Is it possible to have listener for that event using JDC ?
    Any suggestion is welcome.
    TIA,
    Sudarson

    This is not something that Verizon would handle or be able to change.  It would be something that Google would have to change in the Android source code, or the OEMs in their device specific versions.  Or you could just look for another app.

  • My iPad 2 started to backup iCloud and its now locked up. How do i unlock it, the button for settings and close are not working. What can I do?

    my iPad 2 started to backup iCloud and its now locked up. How do i unlock it, the button for settings and close are not working. What can I do?

    Try this.
    Reboot the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider if it appears on the screen - let go of the buttons. Let the iPad start up.

  • How do I find a "download button" for the Flash Player 11.x?

    How do I find a "download button" for the Flash Player 1.x updateon my Mac? All I find is a download tag for other products on the Adobe Flash Player 11.6.602.180" page.

    You don't even need a button.
    Either:
    <a href="docs/mytext.pdf">My text</a>
    Or:
    <a href="docs/my text.pdf"><img src="images/pdf.gif"
    width="34" height="20" border="0"></a>
    where the image is the pdf symbol
    GP01

  • How to hide/remove the 'Delete' button for a particular role

    We have a role that can only Create and Edit the Accounts, Contacts, Opportunities, & Leads. So I modified the Default and Owner Access Profiles for that role and changed the Access Level to 'Read/Edit' for each of the above mentioned Record Types.
    When the user is logged with this role they can see the 'Delete' button on all the Record Types. When they click on the 'Delete' button they get the 'Access Denied' message. Thats fine, but how do you hide/remove the 'Delete' button for this role so they don't try to click it.

    At this time it is not possible to hide/remove the "Delete" button. This functionality is on the roadmap.

  • How do I create a submit button for my form? I would like it to send the completed PDF to an email address

    Hi everyone,
    I recently upgraded to Adobe XI and I can't find a "submit by email" button for my form. I created a button and tried to set up some actions but, I can only get the button to direct the user to a URL. How do I make it send the completed PDF to our designated company email address? I'm not too familiar with JAVASCRIPTS so I haven't tried that plus I heard it may not work with users with adobe reader.
    Any help would be appreciated.
    Thanks,
    Matt

    Thanks for the input. I think you might have a different version of LiveCycle than the copy I have since it looks a little different. However, I found the answer in Adobe help. I had to type "mailto:" before the email address to indicate it's an email and not a URL. See below.
    To collect form data as attachments to email, type mailto: followed by the email address. For example, mailto:[email protected]

  • How can I create a custom button for opening a form?

    I have a parent form having child forms. In my main form I want to create custom buttons for opening child forms. I want to use master-detail form but there are more than one child forms, and in master-detail form I can only create one detail form. So I will create a form based on a table and in that form I will call the child forms by custom buttons. Can I do that?
    Thanx,
    Gulsah.

    This can be easily done. First open up two instances of your Portal. In one window, you will need to go into your component you wish to link FROM. In the other window you will need to go into your component you wish to link TO. In the component you wish to link TO there will be a moduleid. Note this somewhere. Then, you will see an area that says: "Call Interface: Show". Click on this. (In the window you are linking to.). In this window, you will see a bunch of stuff. At the bottom you will see a URL call. This is the call you need to use. At the top, it explains each piece of the URL call. Just subsitute YOUR appropriate information into the URL call. In the form you wish to link FROM, create a button. Once you create this button, it will appear at the bottom, click on it and you will see an area to insert a Javascript. Click the onClick and insert:
    //this is the variable you want to pass from one form to the other
    get_field_name = getField(this.form,'COLUMN_NAME_IN_DATABASE');
    //this is so you can open the "child" form
    window.open('/pls/cc_prod/DAD_NAME.wwa_app_module.link?p_arg_names=_moduleid&p_arg_values=MOD_ID_HERE&p_arg_names=_sessionid&p_arg_values=&p_arg_names=COLUMN_NAME_IN_DATABASE&p_arg values='+GETFIELD_NAME+'&p_arg_names=_COLUMN_NAME_IN_DATABASE_cond&p_arg_values=%3D');
    In the fourth tab, where it says, "....before displaying form" insert the following: (This will tell the form how to handle the getField function.)
    htp.p('<script language="JavaScript1.3">
    < !--
    function getField(form,fieldName)
    var objName = "";
    var tmp = "";
    var dAction = "";
    var sel_idx = 0;
    var cnt = 0;
    var instance = 0;
    var slicedName;
    var fillData = new Array();
    for (var i = 0; i < form.length; i++)
    slicedName = form.elements.name.split(".");
    tmp = slicedName[2];
    instance = parseInt(slicedName[3],10);
    if (!tmp)
    continue;
    objName = tmp;
    if (objName == fieldName)
    return form.elements[i].value;
    //-->
    </script>');
    I hope this helps.
    null

  • How do I make full screen button for interactive PDF

    I know in Acrobat I can set the PDF to open in full screen mode. I want the PDF to open in normal view. There will be a full screen button. Click once and the PDF expands to full screen. Click again and the PDF reverts to normal size.
    I wasn't sure where to post this but figured this is the place to start. Any advice on how to do this appreciated.
    Here's a movie of a PDF that has the feature I'm seeking:
    Full Screen Normal Screen button
    Was testing the link and I see you need QT Pro to download. Here's a zip archive of the same movie for download.
    Movie Download

    The client (a woman's club) indicated that about half the women found the full screen annoying and the other half found normal view annoying. So I made it an option. Also, most PDFs I receive such as ID magazine have the option to view normal or full.
    One thing I haven't figured out is how to get the page you're on to be highlighted. So if you go to page 5 in PDF, I would want the button for 5 to be highlighted in red. I ended up using page numbers but would like to be a bit more streamlined.
    I received a PDF the other day and at the top when the page numbers and left/right arrows are, the page numbers read
    FC, IFC, 1, 2, etc.,
    IBC, BC. I thought that was pretty cool. I imagine it has something to do with pagination in ID. Have to see if I can figure that out.

  • How can we create a OCA button for Overview page?

    Hi Experts,
       Please help me with all the steps for creating an OCA button for Overview page. I have already tried it for table view in Viewset and it is working fine but how to do that in Overview page.
    Thanks and Regard,
    Pranoy Kumar

    Hi Pranoy,
    You need to redefine two methods of OVP view's _IMPL class and paste this code:
    METHOD if_bsp_wd_toolbar_callback~get_buttons.
      DATA:  ls_button    TYPE  crmt_thtmlb_button_ext.
    Ls_button-on_click = 'EDIT'.
         ls_button-type = cl_thtmlb_util=>gc_icon_edit.
         ls_button-page_id = me->component_id.
         ls_button-enabled = abap_true.
        APPEND ls_button TO rt_buttons.
      ENDMETHOD.                    "if_bsp_wd_toolbar_callbacku2014get_buttons
    method IF_BSP_WD_TOOLBAR_CALLBACK~GET_NUMBER_OF_VISIBLE_BUTTONS.
    *CALL METHOD SUPER->IF_BSP_WD_TOOLBAR_CALLBACK~GET_NUMBER_OF_VISIBLE_BUTTONS
    *  RECEIVING
        RV_RESULT = 6.
    endmethod.
    And write the event handler method for here in my case EDIT, or you can write depending on your requirement.
    Regards,
    Vishal.

  • Is it possible to add buttons for user feed back in Bobj WEBI report?

    Dear all,
    I am an ABAP Web dynpro developer. 
    As part of the workflow, i am displaying  a BOBJ Webi Report to the users.
    The requirement is to allow users Aapprove/Reject the data in the report.
    Is it possible to have user input or any buttons in the Webi Report?
    If yes, How to achieve this ? Please help.
    Thanks,
    Vamshi

    There is discussion option as an out of the box feature. Check this: BI launch pad 4.0: Participate in a discussion about a document

  • Livecycle Designer 8 - Is it possible to have button to clear fields after user has clicked submit by email button so user can reuse form to send another response with different answers?

    Users will use form to fill in stats for enquiries so they want to keep form open, complete a form, click button to submit by email, then click another button to clear form, form now ready to accept form's responses.  They dont' want to keep opening form each time form needs to be completed.
    Hope you help.
    Thanks Sandra

    Hi,
    Thanks for your response, not sure what you mean by a loop.  I put together
    a draft form to show staff in our Knowledge Centre the sort of thing
    Livecycle Designer can do.
    (See attached file: Library  Request  Form_pub_0001.pdf)
    They are currently writing out on form and manually putting into excel to
    keep stats on the requests.
    Due to current Global Financial Crisis my section does not want to spend
    extra money at the moment seeking assistance from our tech heads.  So we
    are looking for least work no expense option for keeping stats.  I am a PA
    who just happens to have Livecycle program on my computer.
    We use Lotus Notes so I thought the staff could save copy of Library
    request form in the stationery folder.  The staff using the form want to be
    able to do the following:
    1. open the Library request form at the beginning of the day;
    2. when a request comes in, complete the form and click on Send by email
    button
    3. click on a Clear Data button to clear all data from all fields so the
    form is open ready for when the next request comes in.
    Staff are time poor and, as this is only one of their numerous duties, they
    don't want to keep going to a location and opening a file which can be very
    slow on some days
    Each day form may be filled out by approximately 15 staff who may receive
    anything from 0 - 4 requests a day.
    I am not a tech head so script writing is a deep, dark mystery.  Can you
    help using the form above as an example for achieving step 3 above.
    Thanks,
    Sandra Smith
    Personal Assistant
    PricewaterhouseCoopers Australia
    Office: ++61 (2) 8266 9069
    Fax: ++61 (2) 8286 9069
    [email protected]
    http://www.pwc.com/au
                                                                                    Kacyndra                                                 
                 <[email protected]                                        
                 >                                                          To
                                           Sandra K Smith/AU/TLS/PwC@AsiaPac
                 08/08/2009 12:25                                           cc
                 AM                                                                               
    Subject
                                           Livecycle 
                 Please respond to         Designer 8 - Is it possible to have
                 clearspace-200985         button to clear fields after user
                 0098-481178-2-216         has clicked submit by email button
                 [email protected].         so user can reuse form to send 
                     adobe.com             another response with different
                                           answers?                                                                               
    if i understand this correctly, you just want everything cleared whena
    buttons is pressed?
    you can either do it individually:
    on button click:
    mytextField.rawData=""
    or do a loop, using child/paretns..

  • I have ipad3 and have internet from sim card, can i use my ipad as a wirelss router and how if it possible, i have IOS 8.0.2

    I Have ipad with IOS8.0.2 with internet from sim card, can i use it as a wireless router and how if it possible?

    Hi Mostafa sanad, 
    Welcome to the Apple Support Communities!
    It sounds like you may want to use your iPad as a personal hotspot. Please read over the attached article for information on the process. 
    iOS: Understanding Personal Hotspot
    Have a great day, 
    Joe

  • Is it possible to have 2adapters for 1 busines System &remaing objs r same?

    hi all,
    It's urgent
    Whether it is possible to have 2 adapters for 1 business System which is having all the Design objects SAME (MM ,IM)
    in receiving side or sending side
    We have the requirement that the same data should be sent to two FTP server ?with 1 BS
    we have to configure 2 receiver Adapters with one BS,is it Possible ?

    Hi,
    You can not have two the same named business systems as "receivers" in receiver determination.
    But you can define two business services/systems (different names) and they can point to one physical system by different adapters.
    Regards,
    Jakub

Maybe you are looking for