How is the data inserted into JTF_RS_SALESREPS?
Hi,
I wanted to know how is the data inserted into JTF_RS_SALESREPS.When we import the resources from CRM Foundation responsibilty the data will be inserted into jtf_rs_resource_extns.I think we need to run a concurrent program to transfer data from jtf_rs_resource_extns to JTF_RS_SALESREPS.
Which Concurrent program should be run?
Please help.
Thanks.
How is the data inserted into CST_INV_QTY_TEMP table ?TABLE: BOM.CST_INV_QTY_TEMP
http://etrm.oracle.com/pls/et1211d9/etrm_pnav.show_object?c_name=CST_INV_QTY_TEMP&c_owner=BOM&c_type=TABLE
Thanks,
Hussein
Similar Messages
-
How is the data inserted into CST_INV_QTY_TEMP table?
Hi All,
How is the data inserted into CST_INV_QTY_TEMP table ?
Thanks in advance,
Mayur
Edited by: 928178 on 17-Apr-2012 04:29How is the data inserted into CST_INV_QTY_TEMP table ?TABLE: BOM.CST_INV_QTY_TEMP
http://etrm.oracle.com/pls/et1211d9/etrm_pnav.show_object?c_name=CST_INV_QTY_TEMP&c_owner=BOM&c_type=TABLE
Thanks,
Hussein -
How does the data inserted after a delete command
Hi Folks,
I have a question regarding a scenario. I deleted some data from a table ( i use the where clause to delete a portion of rows from the table). So after the rows are deleted the space is free but below the high water mark. When i insert new rows in the same table, then where from oracle fetches the space:
A. Will it use the space that is freed up by deleted the rows
B. Use the space above the high water mark. ( If it uses this space then Lets say all the extents are completed and we dont have any extents above the high water mark, then will it use the space freed by the deleted rows or will it complain for the addiditional space)
Please advice.
Also I would appriciate if you could give me a link for a documentation for the above scenerio.
Thanks in advance
KarthikA. Will it use the space that is freed up by deleted
the rows That depends, it's controled by PCTUSED and PCTFREE parameter as described below. Also the free space need to be big enought to hold the new row.
The PCTUSED Parameter
The PCTUSED parameter sets the minimum percentage of a block that can be used for row data plus overhead before new rows are added to the block. After a data block is filled to the limit determined by PCTFREE, Oracle considers the block unavailable for the insertion of new rows until the percentage of that block falls beneath the parameter PCTUSED. Until this value is achieved, Oracle uses the free space of the data block only for updates to rows already contained in the data block.
B. Use the space above the high water mark. ( If it
uses this space then Lets say all the extents are
completed and we dont have any extents above the high
water mark, then will it use the space freed by the
deleted rows or will it complain for the addiditional
space)
When Extents Are Allocated
When you create a table, Oracle allocates to the table's data segment an initial extent of a specified number of data blocks. Although no rows have been inserted yet, the Oracle data blocks that correspond to the initial extent are reserved for that table's rows.
If the data blocks of a segment's initial extent become full and more space is required to hold new data, Oracle automatically allocates an incremental extent for that segment. An incremental extent is a subsequent extent of the same or greater size than the previously allocated extent in that segment.
Please advice.
Also I would appriciate if you could give me a link
for a documentation for the above scenerio.
check Oracle Concept for more detail,
Data Blocks, Extents, and Segments -
How to delete the data loaded into MySQL target table using Scripts
Hi Experts
I created a Job with a validation transformation. If the Validation was failed the data passed the validation will be loaded into Pass table and the data failed will be loaded into failed table.
My requirement was if the data was loaded into Failed database table then i have to delete the data loaded into the Passed table using Script.
But in the script i have written the code as
sql('database','delete from <tablename>');
but as it is an SQL Query execution it is rising exception for the query.
How can i delete the data loaded into MySQL Target table using scripts.
Please guide me for this error
Thanks in Advance
PrasannaKumarHi Dirk Venken
I got the Solution, the mistake i did was the query is not correct regarding MySQL.
sql('MySQL', 'truncate world.customer_salesfact_details')
error query
sql('MySQL', 'delete table world.customer_salesfact_details')
Thanks for your concern
PrasannaKumar -
How to dynamic field insert into intenal table?
hi friends
this is my urgent requirements .... how to dynamic field insert into internal table if it possible please tell me
thanks & regards
pauldharmaHi,
Go through this
REPORT yusmm_text1 NO STANDARD PAGE HEADING
LINE-SIZE 199.
T A B L E S
TABLES: MARA,
MAKT,
THEAD.
GLOBAL TYPE-POOLS
TYPE-POOLS : SLIS.
GLOBAL TYPES
TYPES : BEGIN OF TP_FINAL,
MATNR TYPE MARA-MATNR,
BEGRU TYPE MARA-BEGRU,
MTART TYPE MARA-MTART,
MAKTX TYPE MAKT-MAKTX,
SPRAS TYPE MAKT-SPRAS,
LTXT(2000) TYPE C ,
SRNO TYPE N ,
END OF TP_FINAL.
TYPES : BEGIN OF TP_T002,
SPRAS TYPE T002-SPRAS,
LAISO TYPE T002-LAISO,
SRNO TYPE N ,
END OF TP_T002.
TYPES : BEGIN OF TP_MARA_MAKT,
MATNR TYPE MARA-MATNR,
BEGRU TYPE MARA-BEGRU,
MTART TYPE MARA-MTART,
SPRAS TYPE MAKT-SPRAS,
MAKTX TYPE MAKT-MAKTX,
END OF TP_MARA_MAKT.
Types: BEGIN OF tp_matnr,
matnr TYPE mara-matnr,
END OF tp_matnr.
GLOBAL ELEMENTARY VARIABLES
DATA : gv_date TYPE sy-datum.
DATA : gv_repid TYPE sy-repid.
DATA : g_var1(10) TYPE C.
DATA : gv_index TYPE sy-tabix.
DATA: gv_strg TYPE string,
gv_strg1(2000) TYPE C.
DATA : gv_lang TYPE sy-langu.
DATA : g_v(3) TYPE N .
DATA : gv_lines(3) TYPE N .
DATA : gv_var(3) TYPE N .
DATA : gv_var1(3) TYPE N.
DATA: gv_str TYPE STRING.
DATA: gv_str1 TYPE STRING.
DATA : gv_li TYPE I,
gv_lit TYPE I,
gv_lin TYPE I.
DATA: g_var11(3) TYPE N,
gv_li1(3) TYPE N,
g_var2(3) TYPE N.
DATA : gv_i1 TYPE I.
DATA : gv_i TYPE I.
DATA: gl_lenght TYPE I.
GLOBAL STRUCTURES
DATA: T_NEWTABLE TYPE REF TO DATA,
T_NEWLINE TYPE REF TO DATA,
T_FLDCAT1 TYPE SLIS_T_FIELDCAT_ALV,
T_FLDCAT TYPE LVC_T_FCAT,
WA_IT_FLDCAT TYPE LVC_S_FCAT,
WA_IT_FLDCAT1 TYPE SLIS_FIELDCAT_ALV,
WA_COLNO(2) TYPE N,
WA_FLNAME(5) TYPE C,
L_LT TYPE SLIS_LAYOUT_ALV.
GLOBAL INTERNAL TABLES (WITH INCLUDE STRUCTURE)
DATA : IG_MARA_MAKT TYPE STANDARD TABLE OF TP_MARA_MAKT,
WG_MARA_MAKT TYPE TP_MARA_MAKT.
DATA : IG_T002 TYPE STANDARD TABLE OF TP_T002,
WG_T002 TYPE TP_T002.
DATA : IG_FINAL TYPE STANDARD TABLE OF TP_FINAL,
WG_FINAL TYPE TP_FINAL.
data : IG_MATNR TYPE STANDARD TABLE OF TP_MATNR WITH HEADER LINE,
WG_MATNR TYPE TP_MATNR.
DATA:BEGIN OF IG_THEAD OCCURS 0.
INCLUDE STRUCTURE THEAD .
DATA: END OF IG_THEAD.
DATA:BEGIN OF IG_TLINE OCCURS 0.
INCLUDE STRUCTURE TLINE .
DATA:END OF IG_TLINE.
FIELD-SYMBOLS
FIELD-SYMBOLS: <T_DYNTABLE> TYPE STANDARD TABLE,"Dynamic internal
"tablename
<FS_DYNTABLE>, "Field symbol to create work area
<FS_FLDVAL> TYPE ANY. " Field symbol to assign values
COMPULSORY
FIELD-SYMBOLS: <FS_DATA> TYPE REF TO DATA,
<FS_DATA1> TYPE REF TO DATA,
<FS_2> TYPE STANDARD TABLE,
<FS_22> TYPE STANDARD TABLE,
<FS_1>,
<FS_11>,
<F>,
<FA>,
<LWA_LINE_WA>,
<LWA_LINE_WA1>.
------- Create Dyn Table From FC
DATA: LT_DATA TYPE REF TO DATA,
LT_DATA1 TYPE REF TO DATA,
LWA_LINE TYPE REF TO DATA,
LWA_LINE1 TYPE REF TO DATA,
LI_FIELD_CAT TYPE LVC_T_FCAT,
LWA_FIELD_CAT TYPE LVC_S_FCAT.
PARAMETERS & SELECT-OPTIONS
SELECTION-SCREEN : BEGIN OF BLOCK B1 WITH FRAME TITLE TEXT-001.
SELECT-OPTIONS : S_SPRAS FOR MAKT-SPRAS NO INTERVALS DEFAULT 'EN'
OBLIGATORY ,
S_MATNR FOR MARA-MATNR,
S_MTART FOR MARA-MTART.
PARAMETERS: GP_SIZE TYPE I DEFAULT '200'.
SELECTION-SCREEN : END OF BLOCK B1.
INITIALIZATION
INITIALIZATION.
gv_repid = sy-repid.
gv_date = sy-datum.
AT SELECTION-SCREEN
AT SELECTION-SCREEN.
IF GP_SIZE < 0.
MESSAGE E002(00).
ENDIF.
IF GP_SIZE > 50000.
MESSAGE W130(26) WITH TEXT-004.
SET CURSOR FIELD 'gp_size'.
ENDIF.
START-OF-SELECTION
START-OF-SELECTION.
PERFORM FIELDCAT.
PERFORM LAYOUT.
PERFORM DATA_FETCH.
PERFORM READ_DATA_TO_FINAL.
SORT ig_final BY matnr spras.
gv_lin = gv_li.
gv_li = gv_li - 2.
LOOP AT ig_final INTO wg_final.
ASSIGN COMPONENT 1 OF STRUCTURE <LWA_LINE_WA1> TO <FA>.
<FA> = 'Material Number'.
ASSIGN COMPONENT 2 OF STRUCTURE <LWA_LINE_WA1> TO <FA>.
<FA> = 'Authorization Group'.
g_VAR11 = wg_final-srno + 2.
gv_li1 = gv_li1 + 2.
MOVE : g_var11 TO gv_i1.
ASSIGN COMPONENT g_var11 OF STRUCTURE <LWA_LINE_WA1> TO <FA>.
<FA> = 'MatDesc'.
g_var2 = g_var11 + gv_lines.
ASSIGN COMPONENT g_var2 OF STRUCTURE <LWA_LINE_WA1> TO <FA>.
<FA> = 'BasicData'.
APPEND <LWA_LINE_WA1> TO <FS_22>.
EXIT.
ENDLOOP.
LOOP AT ig_final INTO wg_final.
AT NEW matnr.
gv_index = sy-tabix.
ASSIGN COMPONENT 1 OF STRUCTURE <LWA_LINE_WA> TO <F>.
<F> = wg_final-matnr.
ENDAT.
AT NEW MATNR.
GV_INDEX = SY-TABIX.
ASSIGN COMPONENT 1 OF STRUCTURE <LWA_LINE_WA1> TO <FA>.
<FA> = wg_final-matnr.
ENDAT.
ASSIGN COMPONENT 2 OF STRUCTURE <LWA_LINE_WA> TO <F>.
<F> = wg_final-begru.
ASSIGN COMPONENT 2 OF STRUCTURE <LWA_LINE_WA1> TO <FA>.
<FA> = wg_final-begru.
gv_var = wg_final-srno + 2.
gv_li = gv_li + 2.
MOVE : gv_var TO gv_i.
ASSIGN COMPONENT gv_var OF STRUCTURE <LWA_LINE_WA> TO <F>.
<F> = wg_final-maktx.
ASSIGN COMPONENT gv_var OF STRUCTURE <LWA_LINE_WA1> TO <FA>.
<FA> = wg_final-maktx.
gv_var1 = gv_var + gv_lines .
ASSIGN COMPONENT gv_var1 OF STRUCTURE <LWA_LINE_WA> TO <F>.
<F> = wg_final-ltxt.
ASSIGN COMPONENT gv_var1 OF STRUCTURE <LWA_LINE_WA1> TO <FA>.
<FA> = wg_final-ltxt.
AT END OF matnr.
APPEND <LWA_LINE_WA> TO <FS_2>.
CLEAR <LWA_LINE_WA>.
ENDAT.
AT END OF matnr.
APPEND <LWA_LINE_WA1> TO <FS_22>.
CLEAR <LWA_LINE_WA1>.
ENDAT.
ENDLOOP.
PERFORM display..
*& Form data_fetch
text
--> p1 text
<-- p2 text
FORM DATA_FETCH .
SELECT matnr
from mara up to gp_size rows
appending corresponding fields of table ig_matnr
where matnr in s_matnr
and mtart in s_mtart.
loop at ig_matnr.
SELECT MARA~MATNR
MARA~BEGRU
MARA~MTART
MAKT~SPRAS
MAKT~MAKTX FROM MARA INNER JOIN MAKT
ON MARAMATNR = MAKTMATNR
appending corresponding fields of TABLE ig_mara_makt UP TO GP_SIZE
ROWS
WHERE makt~spras IN s_spras
AND mara~matnr IN s_matnr
AND mara~mtart IN s_mtart
AND mara~matnr EQ ig_matnr-matnr.
endloop.
IF sy-subrc = 0.
SORT ig_mara_makt.
ENDIF.
ENDFORM. " data_fetch
*& Form read_data_to_final
text
--> p1 text
<-- p2 text
FORM READ_DATA_TO_FINAL .
LOOP AT ig_mara_makt INTO wg_mara_makt .
wg_final-MATNR = wg_mara_makt-MATNR.
wg_final-BEGRU = wg_mara_makt-BEGRU.
wg_final-MTART = wg_mara_makt-MTART.
wg_final-SPRAS = wg_mara_makt-SPRAS.
wg_final-MAKTX = wg_mara_makt-MAKTX.
READ TABLE ig_t002 INTO wg_t002 WITH KEY spras = wg_final-spras.
IF sy-subrc = 0.
wg_final-srno = wg_t002-srno.
ENDIF.
CLEAR ig_thead[].
ig_thead-TDOBJECT = 'MATERIAL'.
ig_thead-TDNAME = wg_final-matnr.
ig_thead-TDID = 'GRUN'.
ig_thead-TDSPRAS = wg_final-spras.
CALL FUNCTION 'TEXT_READ'
EXPORTING
I_HEADER = IG_THEAD
I_READONLY = 'X'
IMPORTING
E_HEADER = IG_THEAD
TABLES
T_LINES = IG_TLINE[]
EXCEPTIONS
NOTFOUND = 1.
IF sy-subrc EQ 0.
LOOP AT ig_tline.
gv_strg = ig_tline-tdline.
IF gv_strg1 <> ' '.
CONCATENATE gv_strg1 ';' gv_strg INTO gv_strg1.
ELSE.
gv_strg1 = gv_strg.
ENDIF.
ENDLOOP.
wg_final-ltxt = gv_strg1.
APPEND wg_final TO ig_final.
CLEAR wg_final.
gv_strg1 = ' '.
ELSE.
APPEND wg_final TO ig_final.
ENDIF.
ENDLOOP.
ENDFORM. " read_data_to_final
" read_data_to_final
*& Form layout
text
--> p1 text
<-- p2 text
FORM LAYOUT .
CLEAR L_LT.
L_LT-ZEBRA = 'X'.
L_LT-COLWIDTH_OPTIMIZE = 'X'.
L_LT-WINDOW_TITLEBAR = 'MATERIAL DETAILS'.
ENDFORM. " layout
*& Form fieldcat
text
--> p1 text
<-- p2 text
FORM FIELDCAT .
SELECT SPRAS
LAISO FROM t002 INTO CORRESPONDING FIELDS OF TABLE ig_t002
WHERE spras IN s_spras.
DESCRIBE TABLE ig_t002 LINES gv_lines.
LOOP AT ig_t002 INTO wg_t002.
g_v = g_v + 1.
Wg_t002-srno = g_v.
MODIFY ig_t002 FROM wg_t002 TRANSPORTING SRNO.
ENDLOOP.
LOOP AT ig_t002 INTO wg_t002.
CLEAR WA_IT_FLDCAT.
MOVE SY-INDEX TO WA_COLNO.
CONCATENATE 'MD-' wg_t002-LAISO
WA_COLNO
INTO WA_FLNAME.
WA_IT_FLDCAT-FIELDNAME = WA_FLNAME.
WA_IT_FLDCAT-DATATYPE = 'CHAR'.
WA_IT_FLDCAT-SELTEXT = WA_FLNAME.
WA_IT_FLDCAT-INTLEN = 250.
WA_IT_FLDCAT-TABNAME = '<FS_2>'.
APPEND WA_IT_FLDCAT TO T_FLDCAT.
CLEAR wg_t002.
ENDLOOP.
LOOP AT ig_t002 INTO wg_t002.
CLEAR WA_IT_FLDCAT.
MOVE SY-INDEX TO WA_COLNO.
CONCATENATE 'BD-' wg_t002-LAISO
WA_COLNO
INTO WA_FLNAME.
WA_IT_FLDCAT-FIELDNAME = WA_FLNAME.
WA_IT_FLDCAT-DATATYPE = 'CHAR'.
WA_IT_FLDCAT-SELTEXT = WA_FLNAME.
WA_IT_FLDCAT-INTLEN = 250.
WA_IT_FLDCAT-TABNAME = '<FS_2>'.
APPEND WA_IT_FLDCAT TO T_FLDCAT.
CLEAR wg_t002.
ENDLOOP.
MOVE 'MATNR' TO WA_FLNAME.
WA_IT_FLDCAT-FIELDNAME = WA_FLNAME.
WA_IT_FLDCAT-DATATYPE = 'CHAR'.
WA_IT_FLDCAT-SELTEXT = 'Material No'.
WA_IT_FLDCAT-INTLEN = 18.
WA_IT_FLDCAT-TABNAME = '<FS_2>'.
INSERT WA_IT_FLDCAT INTO T_FLDCAT INDEX 1.
MOVE 'BEGRU' TO WA_FLNAME.
WA_IT_FLDCAT-FIELDNAME = WA_FLNAME.
WA_IT_FLDCAT-DATATYPE = 'CHAR'.
WA_IT_FLDCAT-SELTEXT = 'Authorization Group'.
WA_IT_FLDCAT-INTLEN = 4.
WA_IT_FLDCAT-TABNAME = '<FS_2>'.
INSERT WA_IT_FLDCAT INTO T_FLDCAT INDEX 2.
DESCRIBE TABLE T_FLDCAT LINES gv_li.
ASSIGN LT_DATA TO <FS_DATA>.
Creating the Dynamic Internal Table
CALL METHOD CL_ALV_TABLE_CREATE=>CREATE_DYNAMIC_TABLE
EXPORTING
IT_FIELDCATALOG = T_FLDCAT " Fieldcatalogue
IMPORTING
EP_TABLE = <FS_DATA> " Dynamic Internal Table
EXCEPTIONS
GENERATE_SUBPOOL_DIR_FULL = 1
OTHERS = 2.
Assign Dyn Table To Field Sumbol
ASSIGN <FS_DATA>->* TO <FS_1>.
Assigning the Internal Table TYPE ANY to Standard internal Table
ASSIGN <FS_1> TO <FS_2>.
Creating a Workarea
CREATE DATA LWA_LINE LIKE LINE OF <FS_2> .
Assigning the Content to the workares as a Pointer
ASSIGN LWA_LINE->* TO <LWA_LINE_WA>.
LOOP AT T_FLDCAT INTO WA_IT_FLDCAT.
WA_IT_FLDCAT1-FIELDNAME = WA_IT_FLDCAT-FIELDNAME.
WA_IT_FLDCAT1-TABNAME = WA_IT_FLDCAT-TABNAME.
WA_IT_FLDCAT1-SELTEXT_L = WA_IT_FLDCAT-SELTEXT.
WA_IT_FLDCAT1-REF_TABNAME = 'MARC'.
APPEND WA_IT_FLDCAT1 TO T_FLDCAT1.
CLEAR : WA_IT_FLDCAT,WA_IT_FLDCAT1.
ENDLOOP.
ASSIGN LT_DATA1 TO <FS_DATA1>.
CALL METHOD CL_ALV_TABLE_CREATE=>CREATE_DYNAMIC_TABLE
EXPORTING
IT_FIELDCATALOG = T_FLDCAT " Fieldcatalogue
IMPORTING
EP_TABLE = <FS_DATA1> " Dynamic Internal table
EXCEPTIONS
GENERATE_SUBPOOL_DIR_FULL = 1
OTHERS = 2.
Assign Dyn Table To Field Sumbol
ASSIGN <FS_DATA1>->* TO <FS_11>.
Assigning the Internal Table TYPE ANY to Standard internal Table
ASSIGN <FS_11> TO <FS_22>.
Creating a Workarea
CREATE DATA LWA_LINE1 LIKE LINE OF <FS_22> .
Assigning the Content to the workares as a Pointer
ASSIGN LWA_LINE1->* TO <LWA_LINE_WA1>.
ENDFORM. " fieldcat
*& Form show
text
--> p1 text
<-- p2 text
FORM Display .
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
EXPORTING
I_INTERFACE_CHECK = ' '
I_BYPASSING_BUFFER = ' '
I_BUFFER_ACTIVE = ' '
I_CALLBACK_PROGRAM = GV_REPID
I_CALLBACK_PF_STATUS_SET = 'PF_STATUS_SET'
I_CALLBACK_USER_COMMAND = 'USER_COMMAND'
I_CALLBACK_TOP_OF_PAGE = ' '
I_CALLBACK_HTML_TOP_OF_PAGE = ' '
I_CALLBACK_HTML_END_OF_LIST = ' '
I_STRUCTURE_NAME =
I_BACKGROUND_ID = ' '
I_GRID_TITLE =
I_GRID_SETTINGS =
IS_LAYOUT = L_LT
IT_FIELDCAT = T_FLDCAT1[]
IT_EXCLUDING =
IT_SPECIAL_GROUPS =
IT_SORT =
IT_FILTER =
IS_SEL_HIDE =
I_DEFAULT = 'X'
I_SAVE = ' '
IS_VARIANT =
IT_EVENTS =
IT_EVENT_EXIT =
IS_PRINT =
IS_REPREP_ID =
I_SCREEN_START_COLUMN = 0
I_SCREEN_START_LINE = 0
I_SCREEN_END_COLUMN = 0
I_SCREEN_END_LINE = 0
I_HTML_HEIGHT_TOP = 0
I_HTML_HEIGHT_END = 0
IT_ALV_GRAPHICS =
IT_HYPERLINK =
IT_ADD_FIELDCAT =
IT_EXCEPT_QINFO =
IR_SALV_FULLSCREEN_ADAPTER =
IMPORTING
E_EXIT_CAUSED_BY_CALLER =
ES_EXIT_CAUSED_BY_USER =
TABLES
T_OUTTAB = <FS_2>
EXCEPTIONS
PROGRAM_ERROR = 1
OTHERS = 2
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
ENDFORM. " display
FORM PF_STATUS_SET USING RS_EXTAB TYPE SLIS_T_EXTAB.
SET PF-STATUS 'DISPLAY' .
ENDFORM. "PF_STATUS_SET
*& Form Name: user_command *
*& Form Desc: For Handling USER_COMMAND *
FORM USER_COMMAND USING IF_UCOMM TYPE SY-UCOMM
IS_SELFIELD TYPE SLIS_SELFIELD.
CASE IF_UCOMM.
WHEN 'DOWNLOAD'.
CALL FUNCTION 'POPUP_TO_CONFIRM'
EXPORTING
TITLEBAR = ' '
DIAGNOSE_OBJECT = ' '
TEXT_QUESTION = 'Data download to excel'
TEXT_BUTTON_1 = 'Ja'(001)
ICON_BUTTON_1 = ' '
TEXT_BUTTON_2 = 'Nein'(002)
ICON_BUTTON_2 = ' '
DEFAULT_BUTTON = '1'
DISPLAY_CANCEL_BUTTON = 'X'
USERDEFINED_F1_HELP = ' '
START_COLUMN = 25
START_ROW = 6
POPUP_TYPE =
IMPORTING
ANSWER =
TABLES
PARAMETER =
EXCEPTIONS
TEXT_NOT_FOUND = 1
OTHERS = 2
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
CALL FUNCTION 'GUI_DOWNLOAD'
EXPORTING
BIN_FILESIZE =
FILENAME = 'C:\Material-Text.xls'
FILETYPE = 'ASC'
APPEND = ' '
WRITE_FIELD_SEPARATOR = 'X'
HEADER = '00'
TRUNC_TRAILING_BLANKS = 'X'
WRITE_LF = 'X'
COL_SELECT = ' '
COL_SELECT_MASK = ' '
DAT_MODE = 'X'
IMPORTING
FILELENGTH = GL_LENGHT
TABLES
DATA_TAB = <FS_22>
EXCEPTIONS
FILE_WRITE_ERROR = 1
NO_BATCH = 2
GUI_REFUSE_FILETRANSFER = 3
INVALID_TYPE = 4
NO_AUTHORITY = 5
UNKNOWN_ERROR = 6
HEADER_NOT_ALLOWED = 7
SEPARATOR_NOT_ALLOWED = 8
FILESIZE_NOT_ALLOWED = 9
HEADER_TOO_LONG = 10
DP_ERROR_CREATE = 11
DP_ERROR_SEND = 12
DP_ERROR_WRITE = 13
UNKNOWN_DP_ERROR = 14
ACCESS_DENIED = 15
DP_OUT_OF_MEMORY = 16
DISK_FULL = 17
DP_TIMEOUT = 18
FILE_NOT_FOUND = 19
DATAPROVIDER_EXCEPTION = 20
CONTROL_FLUSH_ERROR = 21
OTHERS = 22
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
IF GL_LENGHT NE 0.
MESSAGE S398(00) WITH 'DATA downloaded to EXCEL'.
ENDIF.
Thanks
ENDCASE.
ENDFORM. "user_command -
XML data inserting into Master, not Page
First, I fully admit that I jumped into the deep end of the pool. This is my first InDesign project and I'm trying to set up a 2-page spread master to support loading my content from XML.
Thanks to the great online help, these forums/community resources, and my growing bookshelf, I've successfully (or so it seems) created my Master layout, with frames appropriately tagged for my XML (as confirmed by the Structure). Since I'm very novice at InDesign, my testing isn't always unambiguous, but I HAVE successfully loaded my external XML (including graphics and anchored text, plus the story) into my document.
The problem is that the data seems to be flowing into the Master, and not the Page. So if I create all the pages I need ahead of time (right now just 2 spreads for my test), both pages are populated with the first record.
If I only create the first spread, then the data flows and I get the magic "+" for overflow, but I can't click on it in the Page. If I change to the Master I can click on it, which seems the major clue as to why this isn't working. I just have no idea how to fix it.
From everything I've read it seems that I should be able to tag my frames in the Master (which I want to reuse for other documents) and have the data flow into the Pages.
Am I missing something obvious?
Or is what I'm trying to do just not possible? (if so, does that mean I have to keep re-tagging the frames every time I make a new Document? ugh)
I've spent hours trying to resolve this, and would really appreciate a pointer to get me moving again.
Thanks!
julieHm, that seems contradictory to everything I've read and the examples I've seen (although I may have misunderstood the examples - none are quite as complicated as my layout). My text frame has several anchors for XML data that doesn't just flow with the story. How do I set up the tagged anchor frames I need if the story text frame is in the Master but not tagged?
I thought that the story text frame and the anchor frames (some graphics and some text) all needed to be in the same context. If I put them in the Master I get the XML flowing into the Master. If I put them into the Page then the new pages created don't have the proper frames. If I just put the story text frame in the Master, how do I associate it with the anchor frames (I only know how to do this by using the Story editor on the tagged frame as described in A Designer's Guide To Adobe InDesign and XML)?
I'll go back and work through the samples again, but I definitely don't understand how it all fits together.
Thanks!
j -
How to drill date (column )into month in xcelsius
Hi,
I am fresher to Xcelsius. I need to know how to drill the date column into month, then further drilling down month to day.
I have 2 columns
Date Revenue
1/1/2010 452553
2/2/2011 97992
3/5/2011 23526
4/3/2011 63563
If i click " 1/1/2011" date column, i need to see the corresponding month data in seperate chart( i need to get the detailed data).
I need to know how the datas should be arranged in excel.
Thanks in Advance
Regards,
AbiramiHi Abirami,
To filter out date, you can use calendar component in Xcelsius. This article explains how to use the calendar component in an interactive way.
http://www.sdn.sap.com/irj/scn/index?rid=/library/uuid/b05b0244-0453-2e10-b4b3-fab707baddaf
Then with the help of an invisible combo box as explained in the article to could get just the selected month's data in bar chart.
Hope this helps.
Regards,
Anju Saseendran -
How to convert Date format into day in ssrs reports?
Hi
How to convert date format into day?
10/01/2010 as like Monday like that?=weekdayname(datepart("w",Fields!mydate.Value))
-Vaibhav Chaudhari -
When I import a text file(comma separated) into a numbers spreadsheet all the data goes into one column instead of individual columns based on the comma separators. Excel allows you to do this during the import.. Is there a way to accomplish this in numbers without opening it in Excel and the importing into Numbers.
Your user info says iPad. This is the OS X Numbers forum. Assuming you are using OS X… Be sure the file is named with a .csv suffix.
(I don't have an iPad, so I don't know the iOS answer.) -
How test the date formats M/d/yyyy and MM/dd/yyyy .
how test the date formats M/d/yyyy and MM/dd/yyyy .format should accept 3/3/1982 and 03/03/1982 dates.
please help megeorgemc wrote:
kajbj wrote:
Spoiler: Reply #3 is actually the answer to your question.Also, Bruce Willis is a ghost, the Titanic sinks and Verbal is Keyzer Soze.Only one of those endings really surprised me.
You should've heard me in that theatre when the Titanic struck that iceberg... -
How does the GR get into SUS---MM-SUS Sceanario
Hi all,
How does the GR get into SUS---MM-SUS Sceanario. Can anyone explain??
Thanks in Advance..
Regards,
JaganHi,
In SUS - MM scenario
The supplier ships the goods and sends an ASN based on PO or an Scheduling Agreement to the purchaser. If ASN is based on PO then PO Response has to be accepted by the purchaser. When the ASN is sent from the SUS system, an inbound delivery is created automatically in SAP MM.
Now Create GR with reference to ASN or PO based on your requirement in R/3 - MM. The GR notification is then sent to the SUS system, where the supplier can display it.
Please reward points for helpful answers -
How identify the data is client level,plant level or company code level
Dear sirs,
GM
How identify the data is client level,plant level or company code level?
If there is any T.code for same in SAP plz send me otherwise any procedure?
Hopeeeeeeeeee....Hi,
Once you gain experience, you will not look at any table any field or any view...You will do it just like how you use keyboard once you pass type writing....
That is why every area of work, including master data is handed over to specialized teams...that will be their work day in and out....for some one newly entering, it will be little bit tough...once you practice, you will not be worried any more. Of course, basic data at client level, purchasing data plant level etc...some thumb rules are there...still, you will take big blow by following such thumb rules because if you verify storage condition assigned in the storage location is not storage location level!!!!!!!!!!!!!!!
that is experience!! In this forum, it is good to practice rewarding...else, there may not be any more replies
Good Luck
Message was edited by:
Gopala Turaga -
HOW TO EXECUTE TWO "INSERT INTO" IN ONE SQL QUERY?????
i have try the following:
INSERT INTO tab VALUES('a','b');
INSERT INTO tab VALUES('c','d');
and
INSERT INTO tab VALUES('a','b');
INSERT INTO tab VALUES('c','d');
but does not work in ORACLE 10G XE
please help!!It is working fine in Oracle 10g.
SQL> desc emp_t;
Name Null? Type
EMPNO NUMBER(4)
ENAME VARCHAR2(10)
JOB VARCHAR2(9)And the script is --
insert into emp_t values(7799,'Ani','CLERK');
insert into emp_t values(2233,'Rupak','SW'); --File Name is a_a.sql
commit;And, now from command prompt --
SQL> set serveroutput on
SQL>
SQL>
SQL> set lin 1000
SQL>
SQL> select * from emp_t;
EMPNO ENAME JOB
7777 Avik CLERK
6666 prithwi CLERK
7639 Roni CLERK
7499 ALLEN SALESMAN
7521 WARD SALESMAN
7566 JONES MANAGER
7654 MARTIN SALESMAN
7698 BLAKE MANAGER
7782 CLARK MANAGER
7788 SCOTT ANALYST
7839 KING PRESIDENT
EMPNO ENAME JOB
7844 TURNER SALESMAN
7876 ADAMS CLERK
7900 BARRY CLERK
7902 FORD ANALYST
7934 MILLER CLERK
5639 Atul CLERK
17 rows selected.
SQL> @C:\Personal\RND\Oracle\Misc\a_a.sql;
1 row created.
1 row created.
Commit complete.
SQL>
SQL>
SQL> select * from emp_t;
EMPNO ENAME JOB
7799 Ani CLERK
2233 Rupak SW
7777 Avik CLERK
6666 prithwi CLERK
7639 Roni CLERK
7499 ALLEN SALESMAN
7521 WARD SALESMAN
7566 JONES MANAGER
7654 MARTIN SALESMAN
EMPNO ENAME JOB
7698 BLAKE MANAGER
7782 CLARK MANAGER
7788 SCOTT ANALYST
7839 KING PRESIDENT
7844 TURNER SALESMAN
7876 ADAMS CLERK
7900 BARRY CLERK
7902 FORD ANALYST
7934 MILLER CLERK
5639 Atul CLERK
19 rows selected.Regards.
Satyaki De. -
How CallableStatement in JSP use setDate() method to insert the date value into DB?
Dear all,
I met a strange error message when i insert a date value into DB via JSP call PL/SQL procedures.
The error seems caused by the setDate(index, date) method with CallableStatement.
The message is: Can not find the setDate(int, java.util.Date) method in the CallableStatement interfaces.
Any ideas?
Thanks advanced.Thank you!:)
I solved it using this:
String name="david";
stmt = con1.createStatement();
String prikaz1 = "INSERT INTO table (id,age,surname,name) IN 'C:\\Users\\David\\Desktop\\db.mdb' SELECT id,age,surname,' " + name + " ' FROM table2";
stmt.executeUpdate(prikaz1); -
PDF: How to get date/time into the heading of a FOP/PDF file?
Hi!
What changes do I need to make to the PDF report template or what else can I put in the heading block of the "Print" page so that it will include the date and time the PDF was generated?
Also how would I add this so that it prints on the bottom of the page like the page number?
Thanks in advance for any tips, tricks, ideas, examples, etc.!
Dave VenusHi!
Perhaps I missed this some place but you can get the value of a page item or application item into the header or footer of a (FOP) PDF report by using a "&<item>." format substitution string. For example I have a 1 time application process that puts todays date in an application item named F106_SYSDATE (F106_ is the application id). Then in my headers I use:
XXXX Report on: &F106_SYSDATE.
Simple. Works great! And better yet my users are a little happier! :)
Thank for everyone's help and suggestions!
Dave Venus
Maybe you are looking for
-
How to skip span elements while tabbing thru a JSF view's form
I have a form in a xhtml file that while I tab thru the fields, the focus goes to a <span> element which is rendered from a custom JSF tag. This is an expand/collapse section header. I don't want the focus to stop there at all. I have tried the follo
-
Hi, Our Current Scenario: We have Active Directory with 150 users (Single Forest & Single Domain) on Windows Server 2012 R2. Our Current Email Server is Google Apps where we have 150 users already so basically our user does not have facility for Sing
-
BAPI for cost centers in ALE scenario
Hello All, We have a requirement to get the list of cost centres from target system when we do F4 on the cost centre field in IT 0001 PA30 transaction or F4 on the cost centre field in cost assignment tab of PPOME transaction. Is there any BAPI that
-
PLease help: apps continue to reappear after I permantaly delete them when I sync multiple devices.. How do I fix this? I have tried everything..
-
Does anyone how to detect a cherry G84-4100 keyboard on mac os lion?
does anyone how to detect a cherry G84-4100 keyboard on mac os lion? Mine is not detected and the keyboard is working