How is the data inserted into CST_INV_QTY_TEMP table?

Hi All,
How is the data inserted into CST_INV_QTY_TEMP table ?
Thanks in advance,
Mayur
Edited by: 928178 on 17-Apr-2012 04:29

How is the data inserted into CST_INV_QTY_TEMP table ?TABLE: BOM.CST_INV_QTY_TEMP
http://etrm.oracle.com/pls/et1211d9/etrm_pnav.show_object?c_name=CST_INV_QTY_TEMP&c_owner=BOM&c_type=TABLE
Thanks,
Hussein

Similar Messages

How is the data inserted into JTF_RS_SALESREPS?

Hi,
I wanted to know how is the data inserted into JTF_RS_SALESREPS.When we import the resources from CRM Foundation responsibilty the data will be inserted into jtf_rs_resource_extns.I think we need to run a concurrent program to transfer data from jtf_rs_resource_extns to JTF_RS_SALESREPS.
Which Concurrent program should be run?
Please help.
Thanks.

How is the data inserted into CST_INV_QTY_TEMP table ?TABLE: BOM.CST_INV_QTY_TEMP
http://etrm.oracle.com/pls/et1211d9/etrm_pnav.show_object?c_name=CST_INV_QTY_TEMP&c_owner=BOM&c_type=TABLE
Thanks,
Hussein

How to dynamic field insert into intenal table?

hi friends
this is my urgent requirements .... how to dynamic field insert into internal table if it possible please tell me
thanks & regards
pauldharma

Hi,
Go through this
REPORT yusmm_text1 NO STANDARD PAGE HEADING
                     LINE-SIZE 199.
T A B L E S
TABLES: MARA,
        MAKT,
        THEAD.
GLOBAL TYPE-POOLS
TYPE-POOLS : SLIS.
   GLOBAL TYPES
TYPES : BEGIN OF TP_FINAL,
       MATNR TYPE MARA-MATNR,
       BEGRU TYPE MARA-BEGRU,
       MTART TYPE MARA-MTART,
       MAKTX TYPE MAKT-MAKTX,
       SPRAS TYPE MAKT-SPRAS,
       LTXT(2000) TYPE C ,
       SRNO TYPE N ,
      END OF TP_FINAL.
TYPES : BEGIN OF TP_T002,
        SPRAS TYPE T002-SPRAS,
        LAISO TYPE T002-LAISO,
        SRNO TYPE N ,
        END OF TP_T002.
TYPES : BEGIN OF TP_MARA_MAKT,
        MATNR TYPE MARA-MATNR,
        BEGRU TYPE MARA-BEGRU,
        MTART TYPE MARA-MTART,
        SPRAS TYPE MAKT-SPRAS,
        MAKTX TYPE MAKT-MAKTX,
       END OF TP_MARA_MAKT.
Types: BEGIN OF tp_matnr,
       matnr TYPE mara-matnr,
       END OF tp_matnr.
   GLOBAL ELEMENTARY VARIABLES
DATA : gv_date TYPE sy-datum.
DATA : gv_repid TYPE sy-repid.
DATA : g_var1(10) TYPE C.
DATA : gv_index TYPE sy-tabix.
DATA: gv_strg TYPE string,
      gv_strg1(2000) TYPE C.
DATA : gv_lang TYPE sy-langu.
DATA : g_v(3) TYPE N .
DATA : gv_lines(3) TYPE N .
DATA : gv_var(3) TYPE N .
DATA : gv_var1(3) TYPE N.
DATA: gv_str TYPE STRING.
DATA: gv_str1 TYPE STRING.
DATA : gv_li TYPE I,
       gv_lit TYPE I,
       gv_lin TYPE I.
DATA: g_var11(3) TYPE N,
      gv_li1(3) TYPE N,
      g_var2(3) TYPE N.
DATA : gv_i1 TYPE I.
DATA : gv_i TYPE I.
DATA: gl_lenght TYPE I.
   GLOBAL STRUCTURES
DATA:   T_NEWTABLE TYPE REF TO DATA,
        T_NEWLINE TYPE REF TO DATA,
        T_FLDCAT1   TYPE SLIS_T_FIELDCAT_ALV,
        T_FLDCAT   TYPE LVC_T_FCAT,
        WA_IT_FLDCAT TYPE LVC_S_FCAT,
        WA_IT_FLDCAT1 TYPE SLIS_FIELDCAT_ALV,
        WA_COLNO(2) TYPE N,
        WA_FLNAME(5) TYPE C,
        L_LT TYPE SLIS_LAYOUT_ALV.
   GLOBAL INTERNAL TABLES (WITH INCLUDE STRUCTURE)
DATA : IG_MARA_MAKT TYPE STANDARD TABLE OF TP_MARA_MAKT,
       WG_MARA_MAKT TYPE TP_MARA_MAKT.
DATA : IG_T002 TYPE STANDARD TABLE OF TP_T002,
       WG_T002 TYPE TP_T002.
DATA : IG_FINAL TYPE STANDARD TABLE OF TP_FINAL,
       WG_FINAL TYPE TP_FINAL.
data : IG_MATNR TYPE STANDARD TABLE OF TP_MATNR WITH HEADER LINE,
       WG_MATNR TYPE TP_MATNR.
DATA:BEGIN OF IG_THEAD OCCURS 0.
        INCLUDE STRUCTURE THEAD .
DATA: END OF IG_THEAD.
DATA:BEGIN OF IG_TLINE OCCURS 0.
        INCLUDE STRUCTURE TLINE .
DATA:END OF IG_TLINE.
FIELD-SYMBOLS
FIELD-SYMBOLS: <T_DYNTABLE> TYPE STANDARD TABLE,"Dynamic internal
                                                        "tablename
               <FS_DYNTABLE>, "Field symbol to create work area
              <FS_FLDVAL> TYPE ANY.   " Field symbol to assign values
COMPULSORY
FIELD-SYMBOLS: <FS_DATA> TYPE REF TO DATA,
               <FS_DATA1> TYPE REF TO DATA,
               <FS_2>    TYPE STANDARD TABLE,
               <FS_22>   TYPE STANDARD TABLE,
               <FS_1>,
               <FS_11>,
               <F>,
               <FA>,
               <LWA_LINE_WA>,
               <LWA_LINE_WA1>.
------- Create Dyn Table From FC
DATA: LT_DATA        TYPE   REF TO DATA,
      LT_DATA1        TYPE   REF TO DATA,
      LWA_LINE       TYPE   REF TO DATA,
      LWA_LINE1       TYPE   REF TO DATA,
      LI_FIELD_CAT   TYPE   LVC_T_FCAT,
      LWA_FIELD_CAT TYPE   LVC_S_FCAT.
   PARAMETERS & SELECT-OPTIONS
SELECTION-SCREEN : BEGIN OF BLOCK B1 WITH FRAME TITLE TEXT-001.
SELECT-OPTIONS : S_SPRAS FOR MAKT-SPRAS NO INTERVALS DEFAULT 'EN'
                                                        OBLIGATORY ,
                 S_MATNR FOR MARA-MATNR,
                 S_MTART FOR MARA-MTART.
PARAMETERS: GP_SIZE TYPE I DEFAULT '200'.
SELECTION-SCREEN : END OF BLOCK B1.
   INITIALIZATION
INITIALIZATION.
gv_repid = sy-repid.
gv_date = sy-datum.
AT SELECTION-SCREEN
AT SELECTION-SCREEN.
IF GP_SIZE < 0.
   MESSAGE E002(00).
ENDIF.
IF GP_SIZE > 50000.
   MESSAGE W130(26) WITH TEXT-004.
    SET CURSOR FIELD 'gp_size'.
ENDIF.
START-OF-SELECTION
START-OF-SELECTION.
PERFORM FIELDCAT.
PERFORM LAYOUT.
PERFORM DATA_FETCH.
PERFORM READ_DATA_TO_FINAL.
SORT ig_final BY matnr spras.
gv_lin = gv_li.
gv_li = gv_li - 2.
LOOP AT ig_final INTO wg_final.
    ASSIGN COMPONENT 1 OF STRUCTURE <LWA_LINE_WA1> TO <FA>.
    <FA> = 'Material Number'.
    ASSIGN COMPONENT 2 OF STRUCTURE <LWA_LINE_WA1> TO <FA>.
    <FA> = 'Authorization Group'.
    g_VAR11 = wg_final-srno + 2.
    gv_li1 = gv_li1 + 2.
    MOVE : g_var11 TO gv_i1.
    ASSIGN COMPONENT g_var11 OF STRUCTURE <LWA_LINE_WA1> TO <FA>.
    <FA> = 'MatDesc'.
    g_var2 = g_var11 + gv_lines.
    ASSIGN COMPONENT g_var2 OF STRUCTURE <LWA_LINE_WA1> TO <FA>.
    <FA> = 'BasicData'.
    APPEND <LWA_LINE_WA1> TO <FS_22>.
    EXIT.
   ENDLOOP.
LOOP AT ig_final INTO wg_final.
    AT NEW matnr.
      gv_index = sy-tabix.
      ASSIGN COMPONENT 1 OF STRUCTURE <LWA_LINE_WA> TO <F>.
      <F> = wg_final-matnr.
      ENDAT.
    AT NEW MATNR.
    GV_INDEX = SY-TABIX.
    ASSIGN COMPONENT 1 OF STRUCTURE <LWA_LINE_WA1> TO <FA>.
    <FA> = wg_final-matnr.
     ENDAT.
    ASSIGN COMPONENT 2 OF STRUCTURE <LWA_LINE_WA> TO <F>.
    <F> = wg_final-begru.
    ASSIGN COMPONENT 2 OF STRUCTURE <LWA_LINE_WA1> TO <FA>.
    <FA> = wg_final-begru.
    gv_var = wg_final-srno + 2.
    gv_li = gv_li + 2.
    MOVE : gv_var TO gv_i.
    ASSIGN COMPONENT gv_var OF STRUCTURE <LWA_LINE_WA> TO <F>.
    <F> = wg_final-maktx.
    ASSIGN COMPONENT gv_var OF STRUCTURE <LWA_LINE_WA1> TO <FA>.
    <FA> = wg_final-maktx.
    gv_var1 = gv_var + gv_lines .
    ASSIGN COMPONENT gv_var1 OF STRUCTURE <LWA_LINE_WA> TO <F>.
   <F> = wg_final-ltxt.
    ASSIGN COMPONENT gv_var1 OF STRUCTURE <LWA_LINE_WA1> TO <FA>.
    <FA> = wg_final-ltxt.
    AT END OF matnr.
      APPEND <LWA_LINE_WA> TO <FS_2>.
      CLEAR <LWA_LINE_WA>.
    ENDAT.
    AT END OF matnr.
     APPEND <LWA_LINE_WA1> TO <FS_22>.
     CLEAR <LWA_LINE_WA1>.
    ENDAT.
ENDLOOP.
PERFORM display..
*&      Form data_fetch
      text
--> p1        text
<-- p2        text
FORM DATA_FETCH .
SELECT matnr
          from mara up to gp_size rows
         appending corresponding fields of table ig_matnr
         where matnr in s_matnr
         and mtart in s_mtart.
loop at ig_matnr.
SELECT MARA~MATNR
          MARA~BEGRU
          MARA~MTART
          MAKT~SPRAS
          MAKT~MAKTX FROM MARA INNER JOIN MAKT
    ON MARAMATNR = MAKTMATNR
   appending corresponding fields of TABLE ig_mara_makt UP TO GP_SIZE
ROWS
    WHERE makt~spras IN s_spras
    AND   mara~matnr IN s_matnr
    AND   mara~mtart IN s_mtart
    AND   mara~matnr EQ ig_matnr-matnr.
    endloop.
IF sy-subrc = 0.
    SORT ig_mara_makt.
ENDIF.
ENDFORM.                    " data_fetch
*&      Form read_data_to_final
      text
--> p1        text
<-- p2        text
FORM READ_DATA_TO_FINAL .
LOOP AT ig_mara_makt INTO wg_mara_makt .
    wg_final-MATNR = wg_mara_makt-MATNR.
    wg_final-BEGRU = wg_mara_makt-BEGRU.
    wg_final-MTART = wg_mara_makt-MTART.
    wg_final-SPRAS = wg_mara_makt-SPRAS.
    wg_final-MAKTX = wg_mara_makt-MAKTX.
    READ TABLE ig_t002 INTO wg_t002 WITH KEY spras = wg_final-spras.
    IF sy-subrc = 0.
      wg_final-srno = wg_t002-srno.
    ENDIF.
    CLEAR ig_thead[].
    ig_thead-TDOBJECT = 'MATERIAL'.
    ig_thead-TDNAME   = wg_final-matnr.
    ig_thead-TDID     = 'GRUN'.
    ig_thead-TDSPRAS = wg_final-spras.
    CALL FUNCTION 'TEXT_READ'
      EXPORTING
        I_HEADER   = IG_THEAD
        I_READONLY = 'X'
      IMPORTING
        E_HEADER   = IG_THEAD
      TABLES
        T_LINES    = IG_TLINE[]
      EXCEPTIONS
        NOTFOUND   = 1.
    IF sy-subrc EQ 0.
      LOOP AT ig_tline.
        gv_strg = ig_tline-tdline.
        IF gv_strg1 <> ' '.
          CONCATENATE gv_strg1 ';' gv_strg INTO gv_strg1.
        ELSE.
          gv_strg1 = gv_strg.
        ENDIF.
      ENDLOOP.
      wg_final-ltxt = gv_strg1.
      APPEND wg_final TO ig_final.
      CLEAR wg_final.
      gv_strg1 = ' '.
    ELSE.
      APPEND wg_final TO ig_final.
    ENDIF.
ENDLOOP.
ENDFORM.                    " read_data_to_final
" read_data_to_final
*&      Form layout
      text
--> p1        text
<-- p2        text
FORM LAYOUT .
CLEAR L_LT.
L_LT-ZEBRA = 'X'.
L_LT-COLWIDTH_OPTIMIZE = 'X'.
L_LT-WINDOW_TITLEBAR = 'MATERIAL DETAILS'.
ENDFORM.                    " layout
*&      Form fieldcat
      text
--> p1        text
<-- p2        text
FORM FIELDCAT .
SELECT SPRAS
           LAISO FROM t002 INTO CORRESPONDING FIELDS OF TABLE ig_t002
      WHERE spras IN s_spras.
DESCRIBE TABLE ig_t002 LINES gv_lines.
LOOP AT ig_t002 INTO wg_t002.
    g_v = g_v + 1.
    Wg_t002-srno = g_v.
    MODIFY ig_t002 FROM wg_t002 TRANSPORTING SRNO.
ENDLOOP.
LOOP AT ig_t002 INTO wg_t002.
    CLEAR WA_IT_FLDCAT.
    MOVE SY-INDEX TO WA_COLNO.
    CONCATENATE 'MD-' wg_t002-LAISO
                      WA_COLNO
                     INTO WA_FLNAME.
    WA_IT_FLDCAT-FIELDNAME = WA_FLNAME.
    WA_IT_FLDCAT-DATATYPE = 'CHAR'.
    WA_IT_FLDCAT-SELTEXT = WA_FLNAME.
    WA_IT_FLDCAT-INTLEN = 250.
    WA_IT_FLDCAT-TABNAME = '<FS_2>'.
    APPEND WA_IT_FLDCAT TO T_FLDCAT.
    CLEAR wg_t002.
    ENDLOOP.
LOOP AT ig_t002 INTO wg_t002.
    CLEAR WA_IT_FLDCAT.
    MOVE SY-INDEX TO WA_COLNO.
    CONCATENATE 'BD-' wg_t002-LAISO
                       WA_COLNO
                    INTO WA_FLNAME.
    WA_IT_FLDCAT-FIELDNAME = WA_FLNAME.
    WA_IT_FLDCAT-DATATYPE = 'CHAR'.
    WA_IT_FLDCAT-SELTEXT = WA_FLNAME.
    WA_IT_FLDCAT-INTLEN = 250.
    WA_IT_FLDCAT-TABNAME = '<FS_2>'.
    APPEND WA_IT_FLDCAT TO T_FLDCAT.
    CLEAR wg_t002.
    ENDLOOP.
MOVE 'MATNR' TO WA_FLNAME.
WA_IT_FLDCAT-FIELDNAME = WA_FLNAME.
WA_IT_FLDCAT-DATATYPE = 'CHAR'.
WA_IT_FLDCAT-SELTEXT = 'Material No'.
WA_IT_FLDCAT-INTLEN = 18.
WA_IT_FLDCAT-TABNAME = '<FS_2>'.
INSERT WA_IT_FLDCAT INTO T_FLDCAT INDEX 1.
MOVE 'BEGRU' TO WA_FLNAME.
WA_IT_FLDCAT-FIELDNAME = WA_FLNAME.
WA_IT_FLDCAT-DATATYPE = 'CHAR'.
WA_IT_FLDCAT-SELTEXT = 'Authorization Group'.
WA_IT_FLDCAT-INTLEN = 4.
WA_IT_FLDCAT-TABNAME = '<FS_2>'.
INSERT WA_IT_FLDCAT INTO T_FLDCAT INDEX 2.
DESCRIBE TABLE T_FLDCAT LINES gv_li.
ASSIGN LT_DATA TO <FS_DATA>.
Creating the Dynamic Internal Table
CALL METHOD CL_ALV_TABLE_CREATE=>CREATE_DYNAMIC_TABLE
    EXPORTING
      IT_FIELDCATALOG           = T_FLDCAT         " Fieldcatalogue
    IMPORTING
      EP_TABLE                  = <FS_DATA>   " Dynamic Internal Table
    EXCEPTIONS
      GENERATE_SUBPOOL_DIR_FULL = 1
      OTHERS                    = 2.
Assign Dyn Table To Field Sumbol
ASSIGN <FS_DATA>->* TO <FS_1>.
Assigning the Internal Table TYPE ANY to Standard internal Table
ASSIGN <FS_1> TO <FS_2>.
Creating a Workarea
CREATE DATA LWA_LINE LIKE LINE OF <FS_2> .
Assigning the Content to the workares as a Pointer
ASSIGN LWA_LINE->* TO <LWA_LINE_WA>.
LOOP AT T_FLDCAT INTO WA_IT_FLDCAT.
    WA_IT_FLDCAT1-FIELDNAME = WA_IT_FLDCAT-FIELDNAME.
    WA_IT_FLDCAT1-TABNAME = WA_IT_FLDCAT-TABNAME.
    WA_IT_FLDCAT1-SELTEXT_L = WA_IT_FLDCAT-SELTEXT.
   WA_IT_FLDCAT1-REF_TABNAME = 'MARC'.
    APPEND WA_IT_FLDCAT1 TO T_FLDCAT1.
    CLEAR : WA_IT_FLDCAT,WA_IT_FLDCAT1.
ENDLOOP.
ASSIGN LT_DATA1 TO <FS_DATA1>.
CALL METHOD CL_ALV_TABLE_CREATE=>CREATE_DYNAMIC_TABLE
    EXPORTING
      IT_FIELDCATALOG           = T_FLDCAT         " Fieldcatalogue
    IMPORTING
      EP_TABLE                  = <FS_DATA1> " Dynamic Internal table
    EXCEPTIONS
      GENERATE_SUBPOOL_DIR_FULL = 1
      OTHERS                    = 2.
Assign Dyn Table To Field Sumbol
ASSIGN <FS_DATA1>->* TO <FS_11>.
Assigning the Internal Table TYPE ANY to Standard internal Table
ASSIGN <FS_11> TO <FS_22>.
Creating a Workarea
CREATE DATA LWA_LINE1 LIKE LINE OF <FS_22> .
Assigning the Content to the workares as a Pointer
ASSIGN LWA_LINE1->* TO <LWA_LINE_WA1>.
ENDFORM.                    " fieldcat
*&      Form show
      text
--> p1        text
<-- p2        text
FORM Display .
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
   EXPORTING
   I_INTERFACE_CHECK                 = ' '
   I_BYPASSING_BUFFER                = ' '
   I_BUFFER_ACTIVE                   = ' '
     I_CALLBACK_PROGRAM                = GV_REPID
    I_CALLBACK_PF_STATUS_SET          = 'PF_STATUS_SET'
    I_CALLBACK_USER_COMMAND           = 'USER_COMMAND'
   I_CALLBACK_TOP_OF_PAGE            = ' '
   I_CALLBACK_HTML_TOP_OF_PAGE       = ' '
   I_CALLBACK_HTML_END_OF_LIST       = ' '
   I_STRUCTURE_NAME                  =
   I_BACKGROUND_ID                   = ' '
   I_GRID_TITLE                      =
   I_GRID_SETTINGS                   =
    IS_LAYOUT                         = L_LT
     IT_FIELDCAT                       = T_FLDCAT1[]
   IT_EXCLUDING                      =
   IT_SPECIAL_GROUPS                 =
   IT_SORT                           =
   IT_FILTER                         =
   IS_SEL_HIDE                       =
   I_DEFAULT                         = 'X'
   I_SAVE                            = ' '
   IS_VARIANT                        =
   IT_EVENTS                         =
   IT_EVENT_EXIT                     =
   IS_PRINT                          =
   IS_REPREP_ID                      =
   I_SCREEN_START_COLUMN             = 0
   I_SCREEN_START_LINE               = 0
   I_SCREEN_END_COLUMN               = 0
   I_SCREEN_END_LINE                 = 0
   I_HTML_HEIGHT_TOP                 = 0
   I_HTML_HEIGHT_END                 = 0
   IT_ALV_GRAPHICS                   =
   IT_HYPERLINK                      =
   IT_ADD_FIELDCAT                   =
   IT_EXCEPT_QINFO                   =
   IR_SALV_FULLSCREEN_ADAPTER        =
IMPORTING
   E_EXIT_CAUSED_BY_CALLER           =
   ES_EXIT_CAUSED_BY_USER            =
    TABLES
      T_OUTTAB                          = <FS_2>
EXCEPTIONS
   PROGRAM_ERROR                     = 1
   OTHERS                            = 2
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
        WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
ENDFORM.                    " display
FORM PF_STATUS_SET USING RS_EXTAB TYPE SLIS_T_EXTAB.
SET PF-STATUS 'DISPLAY' .
ENDFORM. "PF_STATUS_SET
*& Form Name: user_command *
*& Form Desc: For Handling USER_COMMAND *
FORM USER_COMMAND USING IF_UCOMM TYPE SY-UCOMM
                     IS_SELFIELD TYPE SLIS_SELFIELD.
CASE IF_UCOMM.
    WHEN 'DOWNLOAD'.
      CALL FUNCTION 'POPUP_TO_CONFIRM'
        EXPORTING
TITLEBAR                    = ' '
DIAGNOSE_OBJECT             = ' '
          TEXT_QUESTION               = 'Data download to excel'
TEXT_BUTTON_1               = 'Ja'(001)
ICON_BUTTON_1               = ' '
TEXT_BUTTON_2               = 'Nein'(002)
ICON_BUTTON_2               = ' '
DEFAULT_BUTTON              = '1'
DISPLAY_CANCEL_BUTTON       = 'X'
USERDEFINED_F1_HELP         = ' '
START_COLUMN                = 25
START_ROW                   = 6
POPUP_TYPE                  =
IMPORTING
ANSWER                      =
TABLES
PARAMETER                   =
EXCEPTIONS
TEXT_NOT_FOUND              = 1
OTHERS                      = 2
      IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
        WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
      ENDIF.
      CALL FUNCTION 'GUI_DOWNLOAD'
        EXPORTING
    BIN_FILESIZE                  =
          FILENAME                     = 'C:\Material-Text.xls'
         FILETYPE                      = 'ASC'
    APPEND                        = ' '
     WRITE_FIELD_SEPARATOR         = 'X'
    HEADER                        = '00'
     TRUNC_TRAILING_BLANKS         = 'X'
    WRITE_LF                      = 'X'
    COL_SELECT                    = ' '
    COL_SELECT_MASK               = ' '
     DAT_MODE                      = 'X'
   IMPORTING
     FILELENGTH                    = GL_LENGHT
        TABLES
          DATA_TAB                      = <FS_22>
EXCEPTIONS
    FILE_WRITE_ERROR              = 1
    NO_BATCH                      = 2
    GUI_REFUSE_FILETRANSFER       = 3
    INVALID_TYPE                  = 4
    NO_AUTHORITY                  = 5
    UNKNOWN_ERROR                 = 6
    HEADER_NOT_ALLOWED            = 7
    SEPARATOR_NOT_ALLOWED         = 8
    FILESIZE_NOT_ALLOWED          = 9
    HEADER_TOO_LONG               = 10
    DP_ERROR_CREATE               = 11
    DP_ERROR_SEND                 = 12
    DP_ERROR_WRITE                = 13
    UNKNOWN_DP_ERROR              = 14
    ACCESS_DENIED                 = 15
    DP_OUT_OF_MEMORY              = 16
    DISK_FULL                     = 17
    DP_TIMEOUT                    = 18
    FILE_NOT_FOUND                = 19
    DATAPROVIDER_EXCEPTION        = 20
    CONTROL_FLUSH_ERROR           = 21
    OTHERS                        = 22
      IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
        WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
      ENDIF.
      IF GL_LENGHT NE 0.
        MESSAGE S398(00) WITH 'DATA downloaded to EXCEL'.
      ENDIF.
Thanks
ENDCASE.
ENDFORM.                    "user_command

How to load data dynamically into target tables using files as a source

Hi ,
My scenario needs a single interface to load the data of 5 different files into five target tables using a single interface. All target tables have the same structure. It is possible to point to variable source files using ODI. But the same approach is not working with Database tables. I am getting errors while trying to make my target /source table as a dynamic one.
Can anybody suggest anything. The last option would be writing a dynamic PL/SQL block in the KM. Any other suggestions friends ?
Regards,
Atish

After creating a pair of identical source and target tables, I have carried out the following steps:
I am trying just keeping the target as variable
a)created a one to one interface,
b)tested that it is running.
c)created a variable(type =text),
d)used the variable as #v_name in the resource of the target table datastore.
e)in a package used the variable in a set variable step (first step).
f) used the interface as the second step.
g)executed the same in my context.
the <project_code>.variable_name is not getting substituted in the sql_code that is generated by the KM. My KM is SQL Control Append and following is the code that it generates in the Insert into I$ step:
/* DETECTION_STRATEGY = NOT_EXISTS */
insert /*+ APPEND */ into HR.I$_JOBS_COPY1
     JOB_ID,
     JOB_TITLE,
     MIN_SALARY,
     MAX_SALARY,
     IND_UPDATE
select
     JOBS.JOB_ID     JOB_ID,
     JOBS.JOB_TITLE     JOB_TITLE,
     JOBS.MIN_SALARY     MIN_SALARY,
     JOBS.MAX_SALARY     MAX_SALARY,
     'I' IND_UPDATE
from     HR.JOBS JOBS
where     (1=1)
and not exists (
     select     'X'
     from     HR.#PLAYGROUND."v_tab_name" T
     where     T.JOB_ID     = JOBS.JOB_ID
          and     ((JOBS.JOB_TITLE = T.JOB_TITLE) or (JOBS.JOB_TITLE IS NULL and T.JOB_TITLE IS NULL))
          and     ((JOBS.MIN_SALARY = T.MIN_SALARY) or (JOBS.MIN_SALARY IS NULL and T.MIN_SALARY IS NULL))
          and     ((JOBS.MAX_SALARY = T.MAX_SALARY) or (JOBS.MAX_SALARY IS NULL and T.MAX_SALARY IS NULL))
     )

How does the data inserted after a delete command

Hi Folks,
I have a question regarding a scenario. I deleted some data from a table ( i use the where clause to delete a portion of rows from the table). So after the rows are deleted the space is free but below the high water mark. When i insert new rows in the same table, then where from oracle fetches the space:
A. Will it use the space that is freed up by deleted the rows
B. Use the space above the high water mark. ( If it uses this space then Lets say all the extents are completed and we dont have any extents above the high water mark, then will it use the space freed by the deleted rows or will it complain for the addiditional space)
Please advice.
Also I would appriciate if you could give me a link for a documentation for the above scenerio.
Thanks in advance
Karthik

A. Will it use the space that is freed up by deleted
the rows That depends, it's controled by PCTUSED and PCTFREE parameter as described below. Also the free space need to be big enought to hold the new row.
The PCTUSED Parameter
The PCTUSED parameter sets the minimum percentage of a block that can be used for row data plus overhead before new rows are added to the block. After a data block is filled to the limit determined by PCTFREE, Oracle considers the block unavailable for the insertion of new rows until the percentage of that block falls beneath the parameter PCTUSED. Until this value is achieved, Oracle uses the free space of the data block only for updates to rows already contained in the data block.
B. Use the space above the high water mark. ( If it
uses this space then Lets say all the extents are
completed and we dont have any extents above the high
water mark, then will it use the space freed by the
deleted rows or will it complain for the addiditional
space)
When Extents Are Allocated
When you create a table, Oracle allocates to the table's data segment an initial extent of a specified number of data blocks. Although no rows have been inserted yet, the Oracle data blocks that correspond to the initial extent are reserved for that table's rows.
If the data blocks of a segment's initial extent become full and more space is required to hold new data, Oracle automatically allocates an incremental extent for that segment. An incremental extent is a subsequent extent of the same or greater size than the previously allocated extent in that segment.
Please advice.
Also I would appriciate if you could give me a link
for a documentation for the above scenerio.
check Oracle Concept for more detail,
Data Blocks, Extents, and Segments

How to Improve inserts into Template table for Query Processing

Hi guys!
I need your advice. How can i improve inserts into template table (/BI0/0P00000010 for exemple)? In my scenario i forced to load data from cube C_X to cubes C_1, C_2 and C_3.
To get a goal i created a transformations and a DTP process with delta upload to each of cubes (C_1, C_2, C3). And that proccess takes about 3 hours! (it doesn't matter 1.000 or 100.000 records). But when i tried to load data with full update (with a filter) a proccess get data takes about 1 minutes.
I traced process and saw that inserting into template table (which create each time when proccess started) take the longest time. How can i improve it?

Hi Mahendar,
It will require some efforts to investigate it so I propose to open a support ticket with Microsoft (through portal).
Your first question interest me and I am not sure if you are doing proactive or reactive real time reporting. You can try with
HBase for storing and retrieving data. HBase known for providing good read and write speed. If you are not comfortable writing HBase syntax then you can add an abstraction layer i.e. HIVE. It might take little more time when you
query HBase from Hive.
If you are doing real time analytic, then you can choose from Strom and Microsoft Azure Stream Analytic.
Thanks and Regards,
Sudhir Rawat

How to insert into 2 tables from the same page (with one button link)

Hi,
I have the following 2 tables....
Employees
emp_id number not null
name varchar2(30) not null
email varchar2(50)
hire_date date
dept_id number
PK = emp_id
FK = dept_id
Notes
note_id number not null
added_on date not null
added_by varchar2(30) not null
note varchar2(4000)
emp_id number not null
PK = note_id
FK = emp_id
I want to do an insert into both tables via the application and also via the same page (with one button link). I have made a form to add an employee with an add button - adding an employee is no problem.
Now, on the same page, I have added a html text area in another region, where the user can write a note. But how do I get the note to insert into the Notes table when the user clicks the add button?
In other words, when the user clicks 'add', the employee information should be inserted into the Employees table and the note should be inserted into the Notes table.
How do I go about doing this?
Thanks.

Hi,
These are my After Submit Processes...
After Submit
30     Process Row of NOTES     Automatic Row Processing (DML)     Unconditional
30     Process Row of EMPLOYEES     Automatic Row Processing (DML)     Unconditional
40     reset page     Clear Cache for all Items on Pages (PageID,PageID,PageID)     Unconditional
40     reset page     Clear Cache for all Items on Pages (PageID,PageID,PageID)     Unconditional
40     reset page     Clear Cache for all Items on Pages (PageID,PageID,PageID)     Unconditional
40     reset page     Clear Cache for all Items on Pages (PageID,PageID,PageID)     Unconditional
50     Insert into Tables     PL/SQL anonymous block     Conditional
My pl/sql code is the same as posted earlier.
Upon inserting data into the forms and clicking the add button, I get this error...
ORA-06550: line 1, column 102: PL/SQL: ORA-00904: "NOTES": invalid identifier ORA-06550: line 1, column 7: PL/SQL: SQL Statement ignored
     Error      Unable to process row of table EMPLOYEES.
Is there something wrong with the pl/sql code or is it something else?

How can I insert into a table other than the default table in a form

Hi,
I want to insert into a table with some fields value of a form of another table. I have written insert code On successful submission of that form, but after submit it gives the following error
An unexpected error occurred: ORA-06502: PL/SQL: numeric or value error (WWV-16016)
My code is like this
declare
l_trn_id number;
l_provider_role varchar2(3);
l_provider_id varchar2(10);
begin
l_trn_id := p_session.get_value_as_number(p_block_name=>'DEFAULT',p_attribute_name=>'A_TRANSACTION_ID');
l_provider_id := p_session.get_value_as_varchar2(p_block_name=>'DEFAULT',p_attribute_name=>'A_PROVIDER1');
l_PROVIDER_ROLE := p_session.get_value_as_varchar2(p_block_name=>'DEFAULT',p_attribute_name=>'A_PROVIDER_ROLE1');
if (l_provider_role is not null) and (l_provider_id is not null) then
insert into service_provider_trans_records(service_provider_id,transaction_id,role_type_id)
values(l_provider_id, l_trn_id, l_provider_role);
commit;
end if;
end;
Where 'PROVIDER1' and 'PROVIDER_ROLE1' are not table fields.
How can do that or why this error comes ? Any idea?
Thanks
Sumita

Hi,
When do you get this error? Is it while running or while creating the form.
Here is a sample code which inserts a non-database column dummy into a table called dummy. This is done in successful procedure.
declare
l_dummy varchar2(1000);
begin
l_dummy := p_session.get_value_as_varchar2(p_block_name=>'DEFAULT',
p_attribute_name=>'A_DUMMY');
insert into sjayaram903_1g.dummy values(l_dummy);commit;
end;
Please check in your case if the size of the local variable is enough to hold the values being returned.
Thanks,
Sharmila

How can I get a count at the same time I am inserting into another table

I have a requirement where I have to find out the count(number of records inserted into another table) at the same time I insert into the table:
Like
I am copying records from table B to A, while doing this I have to find out how many records I've inserted since I need this count in subsequent steps
INSERT INTO A
SELECT * FROM B
how can I store the count into any variable while doing above statement
Please advice

No, Warren that doesn't work!
SQL> set serveroutput on
SQL> declare
2     vCtr number := 0;
3 begin
4     insert into emp2
5     select * from emp;
6
7     select count(*)
8       into vCtr
9       from emp2;
10
11     dbms_output.put_line('rows created '||to_char(vCtr));
12 end;
13 /
rows created 15
PL/SQL procedure successfully completed.
SQL> declare
2     vCtr number := 0;
3 begin
4     insert into emp2
5     select * from emp;
6
7     select count(*)
8       into vCtr
9       from emp2;
10
11     dbms_output.put_line('rows created '||to_char(vCtr));
12 end;
13 /
rows created 30
PL/SQL procedure successfully completed.
SQL>

How to extract data from xml and insert into Oracle table

Hi,
I have a large xml file. which will have hundreds of the following transaction tags having column names and there values.
There is a table one of the schema with coulums "actualCostRate","billRate"....etc.
I need to extract the values of these columns and insert into the table
<Transaction actualCostRate="0" billRate="0" chargeable="1" clientID="NikuUK" chargeCode="LCOCD1" externalID="L-RESCODE_UK1-PROJ_UK_CNT_GBP-37289-8" importStatus="N" projectID="TESTPROJ" resourceID="admin" transactionDate="2002-02-12" transactionType="L" units="11" taskID="5017601" inputTypeCode="SALES" groupId="123" voucherNumber="ABCVDD" transactionClass="ABCD"/>
<Transaction actualCostRate="0" billRate="0" chargeable="1" clientID="NikuEU" chargeCode="LCOCD1" externalID="L-RESCODE_US1-PROJ_EU_STD2-37291-4" importStatus="N" projectID="TESTPROJ" resourceID="admin" transactionDate="2002-02-04" transactionType="L" units="4" taskID="5017601" inputTypeCode="SALES" groupId="124" voucherNumber="EEE222" transactionClass="DEFG"/>

Re: Insert from XML to relational table
http://www.google.ae/search?hl=ar&q=extract+data+from+xml+and+insert+into+Oracle+table+&btnG=%D8%A8%D8%AD%D8%AB+Google&meta=

How to fill the data of two different tables into one?

Hi Experts,
I have two tables named CDHDR and CDSHW(structure). I have extracted the data from these two tables through two function modules named CHANGEDDOCUMENT_HEADER and CHANGEDOCUMENT_POSITION. Now I have the data in to different tables.
These two tables neither has relationship with each other through any field nor have any field which exist in both. Can anyone tell me in this case what should be the process to take the data of both the tables into one table. How can I match the record of one table to another?
thanks a ton in advance.
Edited by: Moni Bindal on Apr 28, 2008 4:16 PM
Edited by: Alvaro Tejada Galindo on Apr 28, 2008 1:42 PM

Hye Bindal,
without a relation, it is not possible to club the data of 2 internal tables. More over it depends on the requirement as to y u should club to non related quantities in an internal table.
if you wish to do so, one thing is it has internal table which includes the strucute of the 2.
data: begin of ty_out,
          first type first_structure,
          second type second_structure,
         end of ty_out.
data: itab type standard table of ty_out.
data: wa type ty_out.
loop into it1 into wa1.
move corresponding wa to wa1.
append wa to itab.
endloop.
loop into it2 into wa2.
move corresponding wa to wa2.
append wa to itab.
endloop.
now the internal table itab will have all the contents of it1 and it2.
<REMOVED BY MODERATOR>
Thanks,
Imran.
Edited by: Alvaro Tejada Galindo on Apr 28, 2008 1:43 PM

How could I insert the deleted row into another table within a trigger?

Hi,
How could I insert the deleted row into another table within a trigger? The destination table has the same columns as the source table. Since the statements are in the trigger, it is not allowed to query the source table named 'test'. Thanks! The trigger is as follows, uncompleted:
CREATE TRIGGER delete_trigger
AFTER DELETE
ON test
FOR EACH ROW
BEGIN
-- How could I insert the deleted row into another table
END delete_trigger;
Message was edited by:
user569548

Hi,
I'm not sure what's wrong there.
I read the oracle docs about ANALYZE and ALL_TAB_COLUMNS, and did the following:
ANALYZE TABLE my_tab VALIDATE STRUCTURE; //went ok.
SELECT column_name
FROM all_tab_columns
WHERE table_name = 'my_tab'; //but no rows selected?
This topic might not be what this thread should be about. Here I posted a new thread:
How to get colum names of the newly created table?
Thanks.
Message was edited by:
user569548

How to delete the data loaded into MySQL target table using Scripts

Hi Experts
I created a Job with a validation transformation. If the Validation was failed the data passed the validation will be loaded into Pass table and the data failed will be loaded into failed table.
My requirement was if the data was loaded into Failed database table then i have to delete the data loaded into the Passed table using Script.
But in the script i have written the code as
sql('database','delete from <tablename>');
but as it is an SQL Query execution it is rising exception for the query.
How can i delete the data loaded into MySQL Target table using scripts.
Please guide me for this error
Thanks in Advance
PrasannaKumar

Hi Dirk Venken
I got the Solution, the mistake i did was the query is not correct regarding MySQL.
sql('MySQL', 'truncate world.customer_salesfact_details')
error query
sql('MySQL', 'delete table world.customer_salesfact_details')
Thanks for your concern
PrasannaKumar

How to insert into a table with a nested table which refer to another table

Hello everybody,
As the title of this thread might not be very understandable, I'm going to explain it :
In a context of a library, I have an object table about Book, and an object table about Subscriber.
In the table Subscriber, I have a nested table modeling the Loan made by the subscriber.
And finally, this nested table refers to the Book table.
Here the code concerning the creation of theses tables :
Book :
create or replace type TBook as object
number int,
title varchar2(50)
Loan :
create or replace type TLoan as object
book ref TBook,
loaning_date date
create or replace type NTLoan as table of TLoan;
Subscriber :
create or replace type TSubscriber as object
sub_id int,
name varchar2(25)
loans NTLoan
Now, my problem is how to insert into a table of TSubscriber... I tried this query, without any success...
insert into OSubscriber values
*(1, 'LEVEQUE', NTLoan(*
select TLoan(ref(b), '10/03/85') from OBook b where b.number = 1)
Of course, there is an occurrence of book in the table OBook with the number attribute 1.
Oracle returned me this error :
SQL error : ORA-00936: missing expression
00936. 00000 - "missing expression"
Thank you for your help

1) NUMBER is a reserved word - you can't use it as identifier:
SQL> create or replace type TBook as object
2 (
3 number int,
4 title varchar2(50)
5 );
6 /
Warning: Type created with compilation errors.
SQL> show err
Errors for TYPE TBOOK:
LINE/COL ERROR
0/0      PL/SQL: Compilation unit analysis terminated
3/1      PLS-00330: invalid use of type name or subtype name2) Subquery must be enclosed in parenthesis:
SQL> create table OSubscriber of TSubscriber
2 nested table loans store as loans
3 /
Table created.
SQL> create table OBook of TBook
2 /
Table created.
SQL> insert
2    into OBook
3    values(
4           1,
5           'No Title'
6          )
7 /
1 row created.
SQL> commit
2 /
Commit complete.
SQL> insert into OSubscriber
2    values(
3           1,
4           'LEVEQUE',
5           NTLoan(
6                  (select TLoan(ref(b),DATE '1985-10-03') from OBook b where b.num = 1)
7                 )
8          )
9 /
1 row created.
SQL> select *
2    from OSubscriber
3 /
    SUB_ID NAME
LOANS(BOOK, LOANING_DATE)
         1 LEVEQUE
NTLOAN(TLOAN(000022020863025C8D48614D708DB5CD98524013DC88599E34C3D34E9B9DBA1418E49F1EB2, '03-OCT-85'))
SQL> SY.

Fetch data from one table and insert into two tables in desired format

I have similar to the following data in a table and it is not normalized. The groupID is being used to group two records of similar nature.
DECLARE @OldDoc TABLE (oldDocID INT, groupID INT, deptID INT)
INSERT INTO @OldDoc (oldDocID, groupID) VALUES (1, NULL, 111),(2,NULL,111),(3,1,111),(4,NULL,333),(5,1,222),(6,NULL,333),(7,2,222),(8,2,333),(9,NULL,111),(10,3,222),(11,NULL,333),(12,3,444)
I need to process the data from the above table (@OldDoc) and write into two new tables (@NewDoc and @NewDocGroup) as follows.
oldDocID should be stored as newDocID when inserting to @NewDoc table. Only records with groupID NULL and one record (first one) per group should be considered (For example, oldDocID 5 is not considered as 3 and 5 belong to the same groupID 1) for insertion.
DECLARE @NewDoc TABLE (newDocID INT)
INSERT INTO @NewDoc (newDocID) VALUES (1),(2),(3),(4),(6),(7),(9),(10),(11)
All records from @OldDoc should be considered for insertion into @NewDocGroup table. OldDocID is inserted as NewDocID and deptID is as-is. Instead of groupID, the ID of the first record in the
group should be considered as parentNewDocID (For example, 3 is considered as parentNewDocID for newDocID 5 as 3 and 5 belong to the same groupID in @OldDoc table) for the newDocID.
DECLARE @NewDocGroup (newDocID INT, parentNewDocID INT, deptID INT)
INSERT INTO @NewDocGroup (newDocID, parentNewDocID, deptID) VALUES (1,1,111),(2,2,111),(3,3,111),(4,4,333),(5,3,222),(6,6,333),(7,7,222),(8,7,333),(9,9,111),(10,10,222),(11,11,333),(12,10,444)
How do I accomplish the above using SQL ? Thanks for the help.

>> I have similar to the following data in a table and it is not normalized. The group_id is being used to group two records [sic] of similar nature. <<
Rows are not records. Tables have to have a key by definition. You do not do math with identifiers, so they should not be numeric. Let's ignore that error for now. In short, you are posting garbage. If you had followed Forum Netiquette, would you have posted
this?
CREATE TABLE Old_Documents
(old_doc_id INTEGER NOT NULL PRIMARY KEY,
group_id INTEGER,
dept_nbr INTEGER NOT NULL
REFERENCES Departments (dept_nbr));
INSERT INTO Old_Documents(old_doc_id, group_id, dept_nbr)
VALUES (1, NULL, 111),
(2, NULL, 111),
(3, 1, 111),
(4, NULL, 333),
(5, 1, 222),
(6, NULL, 333),
(7, 2, 222),
(8, 2, 333),
(9, NULL, 111),
(10, 3, 222),
(11, NULL, 333),
(12, 3, 444);
>> I need to process the data from the above table (Old_Documents) and write into two new tables (New_Documents and New_Documents_Groups) as follows. <<
Just like punch cards and mag tape data processing! Being old and being new are a status, not another kind of entity. But that is how mag tapes work. And you even use the verb "fetch" from tape files. This design flaw is called attribute splitting.
Do you have a Male_Personnel and Female_Personnel table? NO! It is just Personnel!
>> old_doc_id should be stored as new_doc_id when inserting to New_Documents table. Only records [sic] with group_id NULL and one record [sic] (first [sic; no ordering in a table] one) per group should be considered (For example, old_doc_id 5 is not considered
as 3 and 5 belong to the same group_id =1) for insertion. <<
Think about your punch card mindset. Why did you physically materialize that redundant New_Documents table? Let me answer that: this is how you work with punch cards! In SQL we use a VIEW:
CREATE VIEW New_Documents (new_doc_id)
AS
SELECT old_doc_id
FROM Old_Documents;
>> All records [sic] from Old_Documents should be considered for insertion into New_Documents_Groups table. The old_doc_id is inserted as new_doc_id and dept_nbr is as-is. Instead of group_id, the ID [sic: which identifier??] of the first [sic: tables
have no ordering like a deck of punch cards] record [sic] in the group should be considered as parent_new_doc_id (For example, 3 is considered as parent_new_doc_id for new_doc_id 5 as 3 and 5 belong to the same group_id in Old_Documents table) for the new_doc_id.
<<
Why not use 5 as the parent? My guess is that you are trying to form equivalence classes. See:
https://www.simple-talk.com/content/print.aspx?article=2020
--CELKO-- Books in Celko Series for Morgan-Kaufmann Publishing: Analytics and OLAP in SQL / Data and Databases: Concepts in Practice Data / Measurements and Standards in SQL SQL for Smarties / SQL Programming Style / SQL Puzzles and Answers / Thinking
in Sets / Trees and Hierarchies in SQL

How is the data inserted into CST_INV_QTY_TEMP table?

Similar Messages

Maybe you are looking for