How long can Validating System Tables Post Import really take?
We imported a large transport set (25GB) into a target environment and it ran for about 40 hours and got to the last step Validating System Tables Post Import..., which is essentially executing the Schema Validation Utility (SVU).
At that point it seemed to get stuck, as we let it run for 24 hours and nothing was added to the log and it didn't fail and it didn't complete.
This does not seem reasonable. How long can this possibly take? Can we safely stop the process and run the SVU independently?
Thanks,
Jeff
My habit is to save and close all files before sleeping, and shut down at the last percent if I knew I wasn't going to be able to charge within a few hours. My open files and current work is to valuable for me to have the computer sleep right in the middle of whatever I was doing, and the health of my OS is too important to me to ignore the possibility of a hard shutdown.
I do not know for a fact that the machine executes a hard shutdown, or actually does a proper shutdown sequence when it knows a hard shutdown is immenent.
Similar Messages
-
How i can access system tables to know the indexes are properly done
Hello Friends,
I have created a table with partitions and a iindex on some columns ..
Using system tables I want to find out whether the indexes are also having partitions implemented .
Please let me know what might be the query using system tables.
using the following query I can findout what all partitions are their in a particular table.
SELECT FROM ALL_TAB_PARTITIONS ORDER BY TABLE_NAME, PARTITION_NAME;*
I want the same on indexes ..
CREATE TABLE X_FA_REV_MNTH_AGG
X_FA_REV_MNTH_AGG_RK NUMBER(10) NOT NULL,
X_AS_OF_DT DATE NOT NULL,
FINANCIAL_ADVISOR_RK NUMBER(10) NOT NULL,
FINANCIAL_ADVISOR_ID VARCHAR2(6 BYTE),
X_FA_UNIV_PRODUCER_ID VARCHAR2(6 BYTE),
X_REVENUE_TYPE_CD VARCHAR2(6 BYTE),
X_MNTH_REV_AMT NUMBER(18,5),
PROCESSED_DTTM DATE
TABLESPACE KAW_DATA
PCTUSED 0
PCTFREE 10
INITRANS 1
MAXTRANS 255
NOLOGGING
PARTITION BY RANGE (X_AS_OF_DT)
PARTITION P200712 VALUES LESS THAN (TO_DATE(' 2008-01-01 00:00:00', 'SYYYY-MM-DD HH24:MI:SS', 'NLS_CALENDAR=GREGORIAN'))
NOLOGGING
NOCOMPRESS
TABLESPACE KAW_DATA
PCTFREE 10
INITRANS 1
MAXTRANS 255
STORAGE (
INITIAL 64K
MINEXTENTS 1
MAXEXTENTS 2147483645
BUFFER_POOL DEFAULT
PARTITION P200801 VALUES LESS THAN (TO_DATE(' 2008-02-01 00:00:00', 'SYYYY-MM-DD HH24:MI:SS', 'NLS_CALENDAR=GREGORIAN'))
NOLOGGING
NOCOMPRESS
TABLESPACE KAW_DATA
PCTFREE 10
INITRANS 1
MAXTRANS 255
STORAGE (
INITIAL 64K
MINEXTENTS 1
MAXEXTENTS 2147483645
BUFFER_POOL DEFAULT
PARTITION P200802 VALUES LESS THAN (TO_DATE(' 2008-03-01 00:00:00', 'SYYYY-MM-DD HH24:MI:SS', 'NLS_CALENDAR=GREGORIAN'))
NOLOGGING
NOCOMPRESS
TABLESPACE KAW_DATA
PCTFREE 10
INITRANS 1
MAXTRANS 255
STORAGE (
INITIAL 64K
MINEXTENTS 1
MAXEXTENTS 2147483645
BUFFER_POOL DEFAULT
PARTITION P200803 VALUES LESS THAN (TO_DATE(' 2008-04-01 00:00:00', 'SYYYY-MM-DD HH24:MI:SS', 'NLS_CALENDAR=GREGORIAN'))
NOLOGGING
NOCOMPRESS
TABLESPACE KAW_DATA
PCTFREE 10
INITRANS 1
MAXTRANS 255
STORAGE (
INITIAL 64K
MINEXTENTS 1
MAXEXTENTS 2147483645
BUFFER_POOL DEFAULT
PARTITION P200804 VALUES LESS THAN (TO_DATE(' 2008-05-01 00:00:00', 'SYYYY-MM-DD HH24:MI:SS', 'NLS_CALENDAR=GREGORIAN'))
NOLOGGING
NOCOMPRESS
TABLESPACE KAW_DATA
PCTFREE 10
INITRANS 1
MAXTRANS 255
STORAGE (
INITIAL 64K
MINEXTENTS 1
MAXEXTENTS 2147483645
BUFFER_POOL DEFAULT
PARTITION P200805 VALUES LESS THAN (TO_DATE(' 2008-06-01 00:00:00', 'SYYYY-MM-DD HH24:MI:SS', 'NLS_CALENDAR=GREGORIAN'))
NOLOGGING
NOCOMPRESS
TABLESPACE KAW_DATA
PCTFREE 10
INITRANS 1
MAXTRANS 255
STORAGE (
INITIAL 64K
MINEXTENTS 1
MAXEXTENTS 2147483645
BUFFER_POOL DEFAULT
PARTITION P200806 VALUES LESS THAN (TO_DATE(' 2008-07-01 00:00:00', 'SYYYY-MM-DD HH24:MI:SS', 'NLS_CALENDAR=GREGORIAN'))
NOLOGGING
NOCOMPRESS
TABLESPACE KAW_DATA
PCTFREE 10
INITRANS 1
MAXTRANS 255
STORAGE (
INITIAL 64K
MINEXTENTS 1
MAXEXTENTS 2147483645
BUFFER_POOL DEFAULT
PARTITION P200807 VALUES LESS THAN (TO_DATE(' 2008-08-01 00:00:00', 'SYYYY-MM-DD HH24:MI:SS', 'NLS_CALENDAR=GREGORIAN'))
NOLOGGING
NOCOMPRESS
TABLESPACE KAW_DATA
PCTFREE 10
INITRANS 1
MAXTRANS 255
STORAGE (
INITIAL 64K
MINEXTENTS 1
MAXEXTENTS 2147483645
BUFFER_POOL DEFAULT
PARTITION P200808 VALUES LESS THAN (TO_DATE(' 2008-09-01 00:00:00', 'SYYYY-MM-DD HH24:MI:SS', 'NLS_CALENDAR=GREGORIAN'))
NOLOGGING
NOCOMPRESS
TABLESPACE KAW_DATA
PCTFREE 10
INITRANS 1
MAXTRANS 255
STORAGE (
INITIAL 64K
MINEXTENTS 1
MAXEXTENTS 2147483645
BUFFER_POOL DEFAULT
PARTITION P200809 VALUES LESS THAN (TO_DATE(' 2008-10-01 00:00:00', 'SYYYY-MM-DD HH24:MI:SS', 'NLS_CALENDAR=GREGORIAN'))
NOLOGGING
NOCOMPRESS
TABLESPACE KAW_DATA
PCTFREE 10
INITRANS 1
MAXTRANS 255
STORAGE (
INITIAL 64K
MINEXTENTS 1
MAXEXTENTS 2147483645
BUFFER_POOL DEFAULT
PARTITION P200810 VALUES LESS THAN (TO_DATE(' 2008-11-01 00:00:00', 'SYYYY-MM-DD HH24:MI:SS', 'NLS_CALENDAR=GREGORIAN'))
NOLOGGING
NOCOMPRESS
TABLESPACE KAW_DATA
PCTFREE 10
INITRANS 1
MAXTRANS 255
STORAGE (
INITIAL 64K
MINEXTENTS 1
MAXEXTENTS 2147483645
BUFFER_POOL DEFAULT
PARTITION P200811 VALUES LESS THAN (TO_DATE(' 2008-12-01 00:00:00', 'SYYYY-MM-DD HH24:MI:SS', 'NLS_CALENDAR=GREGORIAN'))
NOLOGGING
NOCOMPRESS
TABLESPACE KAW_DATA
PCTFREE 10
INITRANS 1
MAXTRANS 255
STORAGE (
INITIAL 64K
MINEXTENTS 1
MAXEXTENTS 2147483645
BUFFER_POOL DEFAULT
PARTITION P200812 VALUES LESS THAN (TO_DATE(' 2009-01-01 00:00:00', 'SYYYY-MM-DD HH24:MI:SS', 'NLS_CALENDAR=GREGORIAN'))
NOLOGGING
NOCOMPRESS
TABLESPACE KAW_DATA
PCTFREE 10
INITRANS 1
MAXTRANS 255
STORAGE (
INITIAL 64K
MINEXTENTS 1
MAXEXTENTS 2147483645
BUFFER_POOL DEFAULT
NOCOMPRESS
NOCACHE
NOPARALLEL
MONITORING;
CREATE UNIQUE INDEX XPKX_FA_REV_MNTH_AGG ON X_FA_REV_MNTH_AGG
(X_AS_OF_DT, X_FA_REV_MNTH_AGG_RK, FINANCIAL_ADVISOR_RK)
INITRANS 2
MAXTRANS 255
NOLOGGING
LOCAL (
PARTITION P200712
NOLOGGING
NOCOMPRESS
TABLESPACE KAW_DATA
PCTFREE 10
INITRANS 2
MAXTRANS 255
STORAGE (
INITIAL 64K
MINEXTENTS 1
MAXEXTENTS 2147483645
BUFFER_POOL DEFAULT
PARTITION P200801
NOLOGGING
NOCOMPRESS
TABLESPACE KAW_DATA
PCTFREE 10
INITRANS 2
MAXTRANS 255
STORAGE (
INITIAL 64K
MINEXTENTS 1
MAXEXTENTS 2147483645
BUFFER_POOL DEFAULT
PARTITION P200802
NOLOGGING
NOCOMPRESS
TABLESPACE KAW_DATA
PCTFREE 10
INITRANS 2
MAXTRANS 255
STORAGE (
INITIAL 64K
MINEXTENTS 1
MAXEXTENTS 2147483645
BUFFER_POOL DEFAULT
PARTITION P200803
NOLOGGING
NOCOMPRESS
TABLESPACE KAW_DATA
PCTFREE 10
INITRANS 2
MAXTRANS 255
STORAGE (
INITIAL 64K
MINEXTENTS 1
MAXEXTENTS 2147483645
BUFFER_POOL DEFAULT
PARTITION P200804
NOLOGGING
NOCOMPRESS
TABLESPACE KAW_DATA
PCTFREE 10
INITRANS 2
MAXTRANS 255
STORAGE (
INITIAL 64K
MINEXTENTS 1
MAXEXTENTS 2147483645
BUFFER_POOL DEFAULT
PARTITION P200805
NOLOGGING
NOCOMPRESS
TABLESPACE KAW_DATA
PCTFREE 10
INITRANS 2
MAXTRANS 255
STORAGE (
INITIAL 64K
MINEXTENTS 1
MAXEXTENTS 2147483645
BUFFER_POOL DEFAULT
PARTITION P200806
NOLOGGING
NOCOMPRESS
TABLESPACE KAW_DATA
PCTFREE 10
INITRANS 2
MAXTRANS 255
STORAGE (
INITIAL 64K
MINEXTENTS 1
MAXEXTENTS 2147483645
BUFFER_POOL DEFAULT
PARTITION P200807
NOLOGGING
NOCOMPRESS
TABLESPACE KAW_DATA
PCTFREE 10
INITRANS 2
MAXTRANS 255
STORAGE (
INITIAL 64K
MINEXTENTS 1
MAXEXTENTS 2147483645
BUFFER_POOL DEFAULT
PARTITION P200808
NOLOGGING
NOCOMPRESS
TABLESPACE KAW_DATA
PCTFREE 10
INITRANS 2
MAXTRANS 255
STORAGE (
INITIAL 64K
MINEXTENTS 1
MAXEXTENTS 2147483645
BUFFER_POOL DEFAULT
PARTITION P200809
NOLOGGING
NOCOMPRESS
TABLESPACE KAW_DATA
PCTFREE 10
INITRANS 2
MAXTRANS 255
STORAGE (
INITIAL 64K
MINEXTENTS 1
MAXEXTENTS 2147483645
BUFFER_POOL DEFAULT
PARTITION P200810
NOLOGGING
NOCOMPRESS
TABLESPACE KAW_DATA
PCTFREE 10
INITRANS 2
MAXTRANS 255
STORAGE (
INITIAL 64K
MINEXTENTS 1
MAXEXTENTS 2147483645
BUFFER_POOL DEFAULT
PARTITION P200811
NOLOGGING
NOCOMPRESS
TABLESPACE KAW_DATA
PCTFREE 10
INITRANS 2
MAXTRANS 255
STORAGE (
INITIAL 64K
MINEXTENTS 1
MAXEXTENTS 2147483645
BUFFER_POOL DEFAULT
PARTITION P200812
NOLOGGING
NOCOMPRESS
TABLESPACE KAW_DATA
PCTFREE 10
INITRANS 2
MAXTRANS 255
STORAGE (
INITIAL 64K
MINEXTENTS 1
MAXEXTENTS 2147483645
BUFFER_POOL DEFAULT
PARTITION PMAX
NOLOGGING
NOCOMPRESS
TABLESPACE KAW_DATA
PCTFREE 10
INITRANS 2
MAXTRANS 255
STORAGE (
INITIAL 64K
MINEXTENTS 1
MAXEXTENTS 2147483645
BUFFER_POOL DEFAULT
)NOPARALLEL;Try ALL_IND_PARTITIONS :)
You should give the Reference Guide a read at http://tahiti.oracle.com for your Oracle version. It gives information for all views that you may or may not be aware of. -
How long can I expect the extracting process to take?
I've downloaded the trial version of Premiere, it has taken about 1h 45m. Now it is "extracting", how long will this take?
It shouldn't take too long. If it does, switch off of anti-virus for a while and then try again. That should speed up the process.
-
How long can the data in PSA be kept?
Hello all,
If a PSA is used for data staging, how long can/should the data be kept in it in a real-time scenario?
Your help will be very much appreciated,
points will be awarded too.
Thanks
S NHI ,
It always depends on the Frequency of data load and the retention of the data in the system . Ideally we only keep 2 days of data in PSA in case of full load and then keep all the delta loads in the PSA including the Intialization Request in the PSA , so that any problem occurs we can load the data from PSA .
But before all that u need to diccuss with ur basis team regarding space or table space . And according to that u need to keep the requests in System.
Assign points if it helps....
Regards,
Vijay -
I ordered a battery for my laptop because it said to replace battery soon. How long can I let the new battery sit around as I wait for the old one to run out of more charge? Will the new one become less effective if it sits around too long?
How much capacity is remaining on your current battery?
Check your power status
From the menu: Hold OPTION and click System Information... èHardware è Power
Copy and Paste in your reply.
The new battery will become less effective if you store it in a hot or humid environment. It should be stored at room temperature (22 C).
Long term storage (6 months):
Apple recommends that you store the battery with a 50% charge. If you store a battery when it’s fully discharged, it could fall into a deep discharge state, which renders it incapable of holding any charge. Conversely, if you store it fully charged for an extended period of time, the battery may experience some loss of battery capacity, meaning it will have a shorter life.
http://www.apple.com/batteries/ -
Hi All, How we can handle a table control in bdc - in detail its urgent pls
Hi All, How we can handle a table control in bdc - in detail its urgent. Please send me the explanation in detail.
Thanks®ards.
Bharathi,
Create Table Control
Step 1 (Create new structure for table control)
Type is name of structure (ZTC_EKKO) and press create
Step 2 (Create Program)
Goto transaction SE80(Object Navigator) -> Repository Browser -> Program.
Enter your program name, please ensure that is begins with SAPMZ as this is a module pool (dialog program).
Press enter to create, and press yes!
Ensure that you create a top include, and press Enter.
Accept the name created for the top include.
Press Enter.
Press Save
Step 3 (Create TOP include)
Double click on the top include and enter following ABAP code:
Tables: ZTC_EKKO.
controls: tc100 type tableview using screen 100.
data: ok_code type sy-ucomm.
data: it_ekko type standard
table of ZTC_EKKO initial size 0,
wa_ekko type ZTC_EKKO.
data: ok_code type sy-ucomm.
Press Save and Activate
Step 4 (Create screen)
Right click the program to create a screen 100 for the dialog. Enter Short description, set screen type to Normal and enter 0 or blank into Next screen. Then move to Element List tab and enter the OK code as OK_CODE (i.e. the same as what you declared in the top include with data: ok_code type sy-ucomm).
Step 5 (Create table control)
Press the Layout button to bring up the screen painter editor.
Press table control button and drag it on to the screen, enter the name of table control created in TOP include (TC100). Now press the yellow button for attributes and set the table control as below options
Step 6 (Populate table control )
Press the orange button (Fields). On the next screen enter ZTC_EKKO and press the Get from Dict button. Select the fields you want (all) and press enter. Now drag them onto your Table Control.
Below is the result, there will been syntax errors if we check now! So Save and go back into the flow logic tab.
Step 7 (Create flow control )
Within the flow logic of screen 100 and create two modules, one to select the data from the database and the other to move the selected fields into the table control. Also insert the two loop statements to populate and retrieve the lines of the table control.
PROCESS BEFORE OUTPUT.
MODULE STATUS_0100.
module data_retrieval.
loop at it_ekko into wa_ekko with control TC100.
module populate_screen.
endloop.
PROCESS AFTER INPUT.
loop at it_ekko.
endloop.
MODULE USER_COMMAND_0100.
Double click the module data_retrieval to create and click yes to get past the popup. Ensure that a new include is created to hold all the PBO modules (default). Press enter.
Select 10 rows of data from the EKKO table and load into the internal table it_ekko. Go back to the flow logic to load this data into the Table Control.
check this one
REPORT ZCALL_TRANS_TAB1 .
TABLES: LFA1,LFBK,lfb1.
data: BEGIN OF it_vendor occurs 0,
LIFNR LIKE LFA1-LIFNR,
bukrs like lfb1-bukrs,
END OF it_vendor.
DATA: BEGIN OF IT_BANK occurs 0,
LIFNR LIKE LFA1-LIFNR,
BANKS LIKE LFBK-BANKS,
BANKL LIKE LFBK-BANKL,
BANKN LIKE LFBK-BANKN,
koinh like lfbk-koinh,
END OF IT_BANK.
data: it_bdcdata like bdcdata occurs 0 with header line.
data: it_messages like bdcmsgcoll occurs 0 with header line.
*selection screen.
selection-screen: begin of block b1 with frame.
parameters: p_file like rlgrap-filename default 'c:/vendor.txt'
obligatory.
parameters: p_file1 like rlgrap-filename default 'c:/xyz.txt'
obligatory.
selection-screen: end of block b1.
*at selection screen.
at selection-screen on value-request for p_file.
perform f4_help using p_file.
at selection-screen on value-request for p_file1.
perform f4_help1 using p_file1.
*start of selection
start-of-selection.
*******uploading file
perform upload_file using p_file P_FILE1.
******open session.
perform populate_data.
*& Form f4_help
form f4_help using p_p_file.
data: l_file type ibipparms-path.
call function 'F4_FILENAME'
importing
file_name = l_file.
p_file = l_file.
endform. " f4_help
*& Form POPULATE_DATA
form populate_data .
DATA: L_STRING TYPE STRing.
DATA: L_COUNTER(2) TYPE n.
loop at it_vendor.
perform bdc_dynpro using 'SAPMF02K' '0106'.
perform bdc_field using 'BDC_CURSOR'
'RF02K-D0130'.
perform bdc_field using 'BDC_OKCODE'
'/00'.
perform bdc_field using 'RF02K-LIFNR'
it_vendor-lifnr.
perform bdc_field using 'RF02K-BUKRS'
it_vendor-bukrs.
perform bdc_field using 'RF02K-D0130'
'X'.
perform bdc_dynpro using 'SAPMF02K' '0130'.
perform bdc_field using 'BDC_CURSOR'
'LFBK-bankn(03)'.
perform bdc_field using 'BDC_OKCODE'
'=UPDA'.
*********bank details
CLEAR l_COUNTER.
LOOP AT IT_BANK WHERE LIFNR = IT_VENDOR-LIFNR.
l_COUNTER = l_COUNTER + 1.
clear l_string.
CONCATENATE 'lfbk-banks(' l_counter ')' into l_string.
perform bdc_field using l_string
it_bank-banks.
clear l_string.
CONCATENATE 'lfbk-bankl(' l_counter ')' into l_string.
perform bdc_field using l_string
it_bank-bankl.
clear l_string.
CONCATENATE 'lfbk-bankn(' l_counter ')' into l_string.
perform bdc_field using l_string
it_bank-bankn.
endloop.
******CALL TRANSACTION.
call transaction 'FK02' using it_bdcdata mode 'A'
messages into it_messages.
write:/ sy-subrc.
perform format_messages.
clear it_bdcdata.
refresh it_bdcdata.
endloop.
endform. " POPULATE_DATA
*& Form FORMAT_MESSAGES
form format_messages .
data: l_msg(100).
loop at it_messages.
call function 'FORMAT_MESSAGE'
exporting
id = it_messages-msgid
lang = sy-langu
no = it_messages-msgnr
v1 = it_messages-msgv1
v2 = it_messages-msgv2
v3 = it_messages-msgv3
v4 = it_messages-msgv4
importing
msg = l_msg
exceptions
not_found = 1
others = 2
write:/ l_msg.
endloop.
endform. " FORMAT_MESSAGES
*& Form bdc_dynpro
form bdc_dynpro using value(p_program)
value(p_screen).
it_bdcdata-program = p_program.
it_bdcdata-dynpro = p_screen.
it_bdcdata-dynbegin = 'X'.
append it_bdcdata.
clear it_bdcdata.
endform. " bdc_dynpro
*& Form bdc_field
form bdc_field using value(p_fnam)
value(p_fval).
it_bdcdata-fnam = p_fnam.
it_bdcdata-fval = p_fval.
append it_bdcdata.
clear it_bdcdata.
endform. " bdc_field
*& Form upload_file
form upload_file using p_p_file
p_p_file1.
CALL FUNCTION 'WS_UPLOAD'
EXPORTING
CODEPAGE = ' '
FILENAME = P_P_FILE
FILETYPE = 'DAT'
HEADLEN = ' '
LINE_EXIT = ' '
TRUNCLEN = ' '
USER_FORM = ' '
USER_PROG = ' '
DAT_D_FORMAT = ' '
IMPORTING
FILELENGTH =
TABLES
data_tab = IT_VENDOR
EXCEPTIONS
CONVERSION_ERROR = 1
FILE_OPEN_ERROR = 2
FILE_READ_ERROR = 3
INVALID_TYPE = 4
NO_BATCH = 5
UNKNOWN_ERROR = 6
INVALID_TABLE_WIDTH = 7
GUI_REFUSE_FILETRANSFER = 8
CUSTOMER_ERROR = 9
NO_AUTHORITY = 10
OTHERS = 11
IF sy-subrc <> 0.
MESSAGE I000(ZZ) WITH 'UNABLE TO UPLOAD'.
STOP.
ENDIF.
*******UPLOADING BANK DETAILS
CALL FUNCTION 'WS_UPLOAD'
EXPORTING
CODEPAGE = ' '
FILENAME = P_P_FILE1
FILETYPE = 'DAT'
HEADLEN = ' '
LINE_EXIT = ' '
TRUNCLEN = ' '
USER_FORM = ' '
USER_PROG = ' '
DAT_D_FORMAT = ' '
IMPORTING
FILELENGTH =
TABLES
data_tab = IT_BANK
EXCEPTIONS
CONVERSION_ERROR = 1
FILE_OPEN_ERROR = 2
FILE_READ_ERROR = 3
INVALID_TYPE = 4
NO_BATCH = 5
UNKNOWN_ERROR = 6
INVALID_TABLE_WIDTH = 7
GUI_REFUSE_FILETRANSFER = 8
CUSTOMER_ERROR = 9
NO_AUTHORITY = 10
OTHERS = 11
IF sy-subrc <> 0.
MESSAGE I000(ZZ) WITH 'UNABLE TO UPLOAD'.
STOP.
ENDIF.
endform. " upload_file
*& Form f4_help1
-->P_P_FILE1 text
form f4_help1 using p_p_file1.
data:l_file1 type ibipparms-path.
CALL FUNCTION 'F4_FILENAME'
IMPORTING
FILE_NAME = l_file1.
p_file1 = l_file1.
endform. " f4_help1
http://sap-img.com/abap/bdc-example-using-table-control-in-bdc.htm
Regards,
Sankar -
How long can Pub and Sub have loss of communication?
We have the following clusters:
UCCX System version: 8.5.1.11004-25
CUCM System version: 8.6.2.22900-9
My understanding is that UCCX cluster can loose communication for 48 hrs, then there are issues with the database? Is this correct?
How long can a Publisher and Subscriber be out of communication before there are database problems, or a rebuild is needed?
I have heard that more than 48 hours, a manual resync is needed. What if it is seven days?
Does the Sub need to just be rebuilt?
Do the same rules hold true for CUCM?Hi markala,
As per the End User License Agreement a single purchase of retail license for Acrobat is good for 2 computers.
If you want to install it on 3 machines you need to procure a volume license.
Regards,
Rave -
How long can you revert back to the original photo after cropping?
Is there any time limit for how long can you revert back to the original photo after cropping? Are you always able to revert back?
Thanks.DAM = "Digital Asset Manager", a fancy name for a filing system.
iPhoto keeps the original and makes one (usually much smaller) copy based on your edits. It is non-destructive in that if you crop, and later change the color, iPhoto will go back to the original and apply the corrections to get the new image, it will not simply modify the preview.
If you want a high quality copy of the image, use the export function which allows you to specify the size and compression. -
How long can I leave my prepaid jetpack 5510l inactive
I want to use it for a month or two and then maybe not use it again for six months or more. I understand the data allowance expires in 30 days and does not roll over (which sucks.) I'm wondering how long can I leave it inactive before I buy more data?
More info on VZWs suspension policy here:
http://www.verizonwireless.com/support/suspend-service-faqs/
Depending on how you want to suspend your Jetpack it will be automatically resumed after a determined amount of time. Suspending with billing vs suspending without billing will allow you more or less time accordingly. There are exceptions posted in that document too so check to see if you qualify for any of them. -
Cannot boot! Cannot charge! How long can we support for RIM?
First of all, I am very disappointed to RIM
From the beginning to now I have used many BlackBerry mobile phone, RIM has been rigorous work and good service. But since I used 9520, now playbook, lets me lose confidence to the RIM, this is real
The escalation of the 668 systems, playbook can not boot, countless toss, numerous times to restart, no solution . After friends advice, finally able to boot.
I don't know such a famous company, before the update products, why there will be such a mistake.
Boot problem is solved, but then again, playbook does not charge, still numerous toss, numerous times to restart, power is reduced from 20% to the present 0%. until now still can not solve.
I don't know, so rigorous style of a company, why not on major issues, the first time to give solutions for every user. Why???
How long can we support for rim? Maybe every user heart will understand.
Add content:
Not charging performance:
In addition to power has no change and in reducing, other phenomenon are exactly the same than a normal machines
No matter how I restart the device, how to charge, all have no effect
Try method:
every 4 minutes hold "power+v-+v+“（three key）to restart; replacement charger plug; the mode of standby charging; continuous plug-in charger; after connecting DBS to connect the charger; continuous charging hours;
The above methods are fellow Netizens suggestions, but no one can save my playbook.
RIM, can you tell me how to do?why did not have anybody, do something?
-
How I can pass parameters by POST method?
How I can pass parameters by POST method?
I use URL Template iView. I checked Requested Method - POST, but when I started the iView the program says:"It's a GET method!"
I use httpServletRequest.getMethod()in the program.
Environment: EP6 SP2
Thank's!Hi Kremena,
the OSS stands for "Online Service System" - service.sap.com - messages or directly: service.sap.com/message.
Hope it helps
Detlev -
How long can the Mini DisplayPort to VGA Adapter last?
Hi,
I've been using Mini DisplayPort to VGA Adapter (genuine) for a year now but not everyday. Yesterday I bought a new display that needs this adapter, so now is the time that it will be used everyday. I was wondering how long can it last (or operational hours) if it were to sit in the same place, not unplugged, with an average use of 4 hours a day?
Thanks
PS. This one: http://store.apple.com/us/product/MB572Z/B/mini-displayport-to-vga-adapter.This is impossible to predict.
Sometime cables last a lifetime, sometimes they fail in short order. -
i just brought new i phone 5 yesterday and now i can see all paid applications and i dont use or have credit card also now how i can buy applications which are important for me? can i buy them online? or use debit card and trust me all my friends are regretting buying phone because of this problem.Kindly help.Cant it can be deducted from our mobile charges?i would be much easier then
You can buy apps using iTunes Gift cards without needing to register your debit card.
http://store.apple.com/us/personalize/itunes -
HT1390 How long can you keep a movie rental, once it's downloaded? Do u need wifi to watch it?
How long can you keep a movie rental, once it's downloaded? Do u need wifi to watch it?
As long as it's been fully downloaded then you shouldn't need to be online in order to watch it.
As to how long you have to watch it, from here :
You have 30 days from the time of rental to watch your movie, and 24 hours (in the US) or 48 hours (elsewhere) after you've started viewing to finish it. Once the rental period expires, the movie will disappear from your iTunes library. -
How long can Apple photo books be expected to last?
How long can Apple photo books be expected to last? Given the type of ink and paper used, what can we expect these books to look like in 10 years? 20 years? 100 years?
Until you spill red wine on them
Here are the specs Apple publishes on the books
LN
Maybe you are looking for
-
Hello Group We have a situation here where our planning team wants to put X as procurement type and also wants to keep special procurement type as 12.(Which is procuring from specific plant) Now situation is when we are doing costing system is explod
-
MacPro does not react to Clear RAM Preview
In order to see the movie fluently I make a RAM Preview. That works fine. But I cannot erase the RAM-Preview. Only after restart of motion, the RAM is free again. When I check with "istat pro"-Widget, I can see that the RAM is full and clicking on "c
-
How do I disable YAHOO toolbar? It is useless to me
There are already other toolbars on top of the screen. Yahoo toolbar has features connecting to ebay, shopping, surfside, & this is all useless. Using Windows 7 and XP Professional. Yahoo toolbar has no choice of disconnecting it. Thank you Firefox 8
-
Hi Is it possible to use RF with Lean WM? What things should I consider in order to do that? Thanks
-
SELECT BANK_CODE,COUNTRY_CODE,CITY_CODE,BANK_TYPE FROM TL_BANK WHERE rowid=(select rowid from TL_BANK where BANK_CODE||COUNTRY_CODE||CITY_CODE ='10377244910CNSHA' AND ACTION_FLAG<>'D') Without using rowid how can i achieve the same functioanlity.