How long should a deployment build run

I started the deployment utility and it reports
Building...
8:35 AM
The Build Status is
Processing VIs...
Press F1 for Help does not respond.
That was over 20 minutes ago and there is no disk activity. There are about 80 IVs. About how long should this take?
thanx,
jvh

This time when I killed the non responsive LV task another one sprang up then became non-responsive. When I killed it the build finished:
Making an installer, please wait...
Loading product deployment information
Adding files to installer
Done adding files
Preparing to build deployment
Copying products from distributions
Building deployment
Copying setup files
Setting merged database information
Setting product information
Setting developer part information
Starting final build
Validating...
Copying files...
Updating files...
Creating merged database...
Creating installer files...
Build complete successfully.
Copying additional setup files
Compressing installer files
Done building deployment
The installer is finished
The build process is done.
11:15 AM
Warning: You may need to add any sequence file(s) referenced by the following expression(s):
"reportgen_" + RunState.Root.Locals.ReportOptions.Format + ".seq" in step 'Process Step Result', sequence 'SequenceFilePostResultListEntry', sequence file 'C:\Documents and Settings\jhite01\My Documents\TestStand Deployment\Image\target\TestStand\_SequentialModel.seq'
"reportgen_" + RunState.Root.Locals.ReportOptions.Format + ".seq" in step 'Process Step Result', sequence 'ProcessModelPostResultListEntry', sequence file 'C:\Documents and Settings\jhite01\My Documents\TestStand Deployment\Image\target\TestStand\_SequentialModel.seq'
"ReportGen_" + Parameters.ReportOptions.ReportStyle + ".seq" in step 'Set ReportOptions based on ReportStyle', sequence 'Get Report Options', sequence file 'C:\Documents and Settings\jhite01\My Documents\TestStand Deployment\Image\target\TestStand\_SequentialModel.seq'
"ReportGen_" + Parameters.ReportOptions.Format + ".seq" in step 'Get Report Footer', sequence 'TestReport', sequence file 'C:\Documents and Settings\jhite01\My Documents\TestStand Deployment\Image\target\TestStand\_SequentialModel.seq'
"ReportGen_" + Parameters.ReportOptions.Format + ".seq" in step 'Get Report Header', sequence 'TestReport', sequence file 'C:\Documents and Settings\jhite01\My Documents\TestStand Deployment\Image\target\TestStand\_SequentialModel.seq'
"ReportGen_" + Parameters.ReportOptions.Format + ".seq" in step 'Get Report Body (Sequence)', sequence 'TestReport', sequence file 'C:\Documents and Settings\jhite01\My Documents\TestStand Deployment\Image\target\TestStand\_SequentialModel.seq'
"ReportGen_" + Parameters.ReportOptions.ReportStyle + ".seq" in step 'Get Report based on ReportStyle', sequence 'TestReport', sequence file 'C:\Documents and Settings\jhite01\My Documents\TestStand Deployment\Image\target\TestStand\_SequentialModel.seq'
"ReportGen_" + Parameters.ReportOptions.Format + ".seq" in step 'Set Report Disabled Message', sequence 'TestReport', sequence file 'C:\Documents and Settings\jhite01\My Documents\TestStand Deployment\Image\target\TestStand\_SequentialModel.seq'
RunState.ProcessModelClient in step 'MainSequence Callback', sequence 'Test UUTs', sequence file 'C:\Documents and Settings\jhite01\My Documents\TestStand Deployment\Image\target\TestStand\_SequentialModel.seq'
"ReportGen_" + Parameters.ReportOptions.Format + ".seq" in step 'Get Report Footer', sequence 'TestReport', sequence file 'C:\Documents and Settings\jhite01\My Documents\TestStand Deployment\Image\target\TestStand\Avionics.seq'
"ReportGen_" + Parameters.ReportOptions.Format + ".seq" in step 'Get Report Header', sequence 'TestReport', sequence file 'C:\Documents and Settings\jhite01\My Documents\TestStand Deployment\Image\target\TestStand\Avionics.seq'
"ReportGen_" + Parameters.ReportOptions.Format + ".seq" in step 'Get Report Body (Sequence)', sequence 'TestReport', sequence file 'C:\Documents and Settings\jhite01\My Documents\TestStand Deployment\Image\target\TestStand\Avionics.seq'
"ReportGen_" + Parameters.ReportOptions.ReportStyle + ".seq" in step 'Get Report based on ReportStyle', sequence 'TestReport', sequence file 'C:\Documents and Settings\jhite01\My Documents\TestStand Deployment\Image\target\TestStand\Avionics.seq'
"ReportGen_" + Parameters.ReportOptions.Format + ".seq" in step 'Set Report Disabled Message', sequence 'TestReport', sequence file 'C:\Documents and Settings\jhite01\My Documents\TestStand Deployment\Image\target\TestStand\Avionics.seq'
"reportgen_" + RunState.Root.Locals.ReportOptions.Format + ".seq" in step 'Process Step Result', sequence 'SequenceFilePostResultListEntry', sequence file 'C:\HARM\Avionics\TestStand\_SequentialModel.seq'
"reportgen_" + RunState.Root.Locals.ReportOptions.Format + ".seq" in step 'Process Step Result', sequence 'ProcessModelPostResultListEntry', sequence file 'C:\HARM\Avionics\TestStand\_SequentialModel.seq'
"ReportGen_" + Parameters.ReportOptions.ReportStyle + ".seq" in step 'Set ReportOptions based on ReportStyle', sequence 'Get Report Options', sequence file 'C:\HARM\Avionics\TestStand\_SequentialModel.seq'
"ReportGen_" + Parameters.ReportOptions.Format + ".seq" in step 'Get Report Footer', sequence 'TestReport', sequence file 'C:\HARM\Avionics\TestStand\_SequentialModel.seq'
"ReportGen_" + Parameters.ReportOptions.Format + ".seq" in step 'Get Report Header', sequence 'TestReport', sequence file 'C:\HARM\Avionics\TestStand\_SequentialModel.seq'
"ReportGen_" + Parameters.ReportOptions.Format + ".seq" in step 'Get Report Body (Sequence)', sequence 'TestReport', sequence file 'C:\HARM\Avionics\TestStand\_SequentialModel.seq'
"ReportGen_" + Parameters.ReportOptions.ReportStyle + ".seq" in step 'Get Report based on ReportStyle', sequence 'TestReport', sequence file 'C:\HARM\Avionics\TestStand\_SequentialModel.seq'
"ReportGen_" + Parameters.ReportOptions.Format + ".seq" in step 'Set Report Disabled Message', sequence 'TestReport', sequence file 'C:\HARM\Avionics\TestStand\_SequentialModel.seq'
RunState.ProcessModelClient in step 'MainSequence Callback', sequence 'Test UUTs', sequence file 'C:\HARM\Avionics\TestStand\_SequentialModel.seq'
"ReportGen_" + Parameters.ReportOptions.Format + ".seq" in step 'Get Report Footer', sequence 'TestReport', sequence file 'C:\HARM\Avionics\TestStand\Avionics.seq'
"ReportGen_" + Parameters.ReportOptions.Format + ".seq" in step 'Get Report Header', sequence 'TestReport', sequence file 'C:\HARM\Avionics\TestStand\Avionics.seq'
"ReportGen_" + Parameters.ReportOptions.Format + ".seq" in step 'Get Report Body (Sequence)', sequence 'TestReport', sequence file 'C:\HARM\Avionics\TestStand\Avionics.seq'
"ReportGen_" + Parameters.ReportOptions.ReportStyle + ".seq" in step 'Get Report based on ReportStyle', sequence 'TestReport', sequence file 'C:\HARM\Avionics\TestStand\Avionics.seq'
"ReportGen_" + Parameters.ReportOptions.Format + ".seq" in step 'Set Report Disabled Message', sequence 'TestReport', sequence file 'C:\HARM\Avionics\TestStand\Avionics.seq'
Warning: The following VI(s) have characters in their names that are not valid for VIs that are not within an LLB. These VIs have been copied from their source LLB into Illegalfilenames.llb instead of being copied as separate VIs into SupportVIs:
Not A Telnet Connection?.vi
HTTP Point In Polygon?.vi
HTTP Standalone?.vi
HTTP Show GWS?.vi
Not A Cookie?.vi
Warning: There is no relative path between the following files. You may need to add a path to your search directories.
From [Installation Directory]\TestStand\_SequentialModel.seq to [TestStand]\Components\Models\TestStandModels\Database\Database.seq
From [Installation Directory]\TestStand\_SequentialModel.seq to [TestStand]\Components\Models\TestStandModels\reportgen_xml.seq
From [Installation Directory]\TestStand\_SequentialModel.seq to [TestStand]\Components\Models\TestStandModels\modelsupport2.dll
From [Installation Directory]\TestStand\_SequentialModel.seq to [TestStand]\Components\Models\TestStandModels\ModelSupport.seq
From [Installation Directory]\TestStand\Avionics.seq to [TestStand]\Components\Models\TestStandModels\modelsupport2.dll
+++++++++++++++++++++++++++++++++++++++

Similar Messages

How long should my nc8430 laptop run with a new 14.4 volt 4400mah battery

Hi I have replaced my laptop battery with a new 14.4 volt 4400mha . with a full charge and power settings at minimal how long should it run I am getting just under 2hours is this normal with intel centrino my previous battery was getting more than three hours.
thanks

I run a 7440 mha battery on an nc4400 and on high performance with no power savings, I get about 2 hours out of it.
So, I would say for yours, that's about right.
Maybe your old battery had a higher capacity.
Did someone help you? Pay it forward. Help someone else.
NC4400, TC4400 Win 7 Ultimate, xp pro, both dual boot
a bunch of thinkpads

How long should it take to run chkdsk on iPod?

I know this should only be used as a last resort and could cause problems, but I am at the point where I have nothing to lose.
How long should it normally take to run chkdsk with both boxes checked (fix file system errors and fix bad sectors?)
Any help will be greatly appreciated.

The sensor is most likely regenerating regular expression cache tables.
Instead of analyzing each signature's regular expression independantly when a packet comes in, it will instead combine the regular expressions of all of the signatures into one giant regular expression and generate a state table, and then write the new state table to the disk/compactflash. (We term these the regular expression cache tables).
When you enable or disable a signature, or when you add in custom signatures, it will have to regenerate these cache tables, because that combined regex has now changed.
(NOTE: Version 5.0 has large improvements in this area. Cache tables are now shipped directly from Cisco for the standard unretired signatures as part of the signature update process. But if you add custom signatures or unretire signatures that Cisco has retired, then even 5.0 can take time to make the changes)
Creating these tables is very CPU intensive, so the sensor is not able to monitor traffic while the tables are being created.
So it is best to save modifications like enable/disabling, retiring/unretiring, changing regular expressions, and creating custom signatures for times when you can afford the sensor downtime.
NOTE: Modifications to severity, actions, summarizations, and filters do not affect the cache tables and should be able to be applied in a matter of seconds.

How long should Aperture take to run a consistancy Check. (15,000 items)

Running on a mac pro for reference
It seems to have stopped at "running VACUUM on database". No movement for 30 mins.
Does this procedure take a long times
Thanks

I also would like to know as I have a aperture file of about 35000 items and running on an iMac, it has been running for days with the progress bar about 3/4 complete but no longer seems to be moving. The Activity Monitor shows it taking up CPU time and performing context switches and Mach Messages Out, Mach System Calls, and Unix System Calls. But it is also only using about 0.8% of the CPU.

Automatic Deployment Performance (How long should it take?)

I began an automatic deployment this morning. How long should it normally take?
I setup the BC4J directories and libraries on the server in accordance with the bc4j2oc4j.sh script and made sure the admin.jar for both JDeveloper and OC4J are version compatible.
What would slow down the process?

Be sure you have performed the following:
Unzip, in Solaris, the current release of JDev on same root as OC4J.
Edit appropriately and run the <JDEV_HOME>\BC4J\bin\bc4j2oc4j.sh script in the OC4J_HOME on Solaris. Be careful! JDEV_HOME and OC4J_HOME should be on equal levels. Do not unzip JDev within OC4J.
Ensure both 9iAS and JDev's (latest release) oc4j.jar and admin.jar are version compatible. Check the sizes and dates. Copy the OC4J's (latest release) oc4j.jar file to your <JDEV_HOME>\j2ee\home directory on the client not the server copy.
Edit your .profile (Sun OS) setup PATH, JDK_HOME = my jdk1.3.1 from the "soft link", OC4J_HOME, and JDEV_HOME on the server.
Be sure you have a "soft link" to JDK1.3 on Sun. Try typing java -version at the $ prompt on Solaris. It should say 1.3.1. If it does not work, most likely its Paths or Permissions to another JDK1.2, etc. Chown something... Find out how to do a "soft link" in Solaris. Its a default setting I think.
Restart the OC4J and begin auto deploy.
Thanks to all the Forum experts for your contributions to my success.
Arnold Angel
[email protected]

How long should I let Safe Mode startup run? I keep getting the "disk0s2 i/o error" message and I'm just not sure when to give up and try a different method. I already ran disk utility in Recovery Mode and it said there were no repairs needed.

How long should I let Safe Mode startup run? I keep getting the "disk0s2 i/o error" message and I'm just not sure when to give up and try a different method. I already ran disk utility in Recovery Mode and it said there were no repairs needed but it still kept getting stuck on the apple loading screen.

You have limited opportunity to attempt to create a backup of your created files.
That is what the SafeBoot or safemode appears to allow you -- at the moment.
Since the hard disk drive exhibits signs of failure or other major issues, plan
on a replacement in the near future. You may be able to get the computer to
start up in a regular full OS X (not safe mode) but consider its hours are limited.
An externally enclosed hard disk drive (with own power supply, not relying on
Mac ports to run it) is a good basic means of which to use a disk utility to make
a copy or a Clone of the current OS X. This may help retrieve an archive that
could be used along with a Time Machine backup, to restore your Mac once you
get a new hard drive installed inside.
Good luck & happy computing!

HT1766 How long should it take for a icloud back up of about 6.4GB? It has been running all night and not complete.

How long should it take for an icloud backup of about 6.4GB? I selected a manual backup and it has been running all night? Thanks

That's going to depend alot on your internet connection speed. 6.4 GB is alot of data, especially if your connection speed is slow (DSL) or low-end cable speeds of ~1.5 Mbps.

I have tried to download update for Firefox 3 separate times ,but each time it runs for more than 30 minutes and is still running, is this normal,? How long should this take?

I have tried downloading the update for Firefox 3 times, but had to go to bed before it was finiahed....seemed to be more than 45 minutes is this normal? How long should it take?

Since the maximum OS X version for an eMac is 10.5, how are you running OS X 10.7.5 on the eMac?
http://support.apple.com/kb/TS1591

How long should I let the extracting process run? It has been over 6 hours (Photoshop Elements.

How long should I let the extracting process run? It has been over 6 hours (Photoshop Elements). I have already received Disk Image Error - 4960. System will not let me attempt another download as message that download is in queue is received??

Cancel it, try this:
Direct Download Links for Adobe Software
Use Winzip to extract the 7z file.
Mylenium

Mavericks is installed and runs well, but how long should I keep the small windows "Optimizing Your Mac" ? It has been now one month!!!

Small window "Optimizing your Mac" (see below) has been on my Desktop for over a month now.
How long should I keep it (... without "impacting the performance or the battery life")?

Closing it when it first appeared wouldn't have stopped the 'optimization' so you could have closed it any time and can do so now - in any case optimization will have long since completed.

How long should it take a well-qualified server admin to migrate from Tiger to Lion...

How long should it take a well-qualified server admin to migrate from Tiger to Lion...
For a small company, if the Tiger server is running on a G4 Tower:
-Roughly 500GB in user files
-Data resides on old-school ATA drives
-OD Master - Kerberized
-AFP
-Mobile Homes
-DHCP
-DNS (for 2 domains)
-FTP
-iChat
-Mail (non SSL)
-NetBoot
-Print Server
-SWUPD
-VPN
-Hosting website using MySQL
-User & Computer Management
Considerations/Hurdles/Challenges:
-Tossing old G4 into garbage, upgrading Mini client to Snow Leopard, adding Lion iMac client to the LAN
-Fresh OS installs on the Mini and iMac
-Upgrading from CAT5 to CATE on the LAN (not it the walls - just loose cables)
-All new hardware must be sourced out (take some time to price compare)
-Must find a way to transfer data from ATA drives to SATA drives or Lion Server
-Company must not have any email downtime (MX Records to be modified on DNS Providers site)
-Servers hostname goes from "companyserver.company.com" to "server.company.com"
-ISP blocks some SMTP ports
-DNS Provider doesn't support TSL/SSL SMTP
-Implementing a switch into the network
-Implementing a new router (for firewall and NAT) from ISP
Upgrading to Lion Mini Server
-All the same services
-Using SSL
-Implementing Mobile Device Enrolment and Deployment
That should just about cover it. I'll add any other details/hurdles as they come to mind.
Can you guys give me your best guesstimate as to how many hours you think this job should take? I'd appreciate any feedback as to how long you guys think it'd take you to make this transition. I'm trying to plan, and we're going to be down-and-out, the boss NEEDS to know for how long.!
Thanks in advance guys!

It's about a gigabyte, so if you have a slow connection, it might take some time.
But - you shouldn't be getting the beach ball - that's a different thing.
Can you do open Activity Monitor, or is it stuck completely?

Configure how long a automatic activity can run before timeout

I have a long running job in this step. Can I configure how long that automatic activity can run before it will time out. How do I configure this when running in the BPM Studio and when deploy the apps to the server?
Alternatively, I was try to use a SecureShell to run a unix job with nohup but somehow it doesn't execute properly and the shell would exit out but the script would not run. When I run the same nohup command line in the external host, it does run properly. Is there any special way to call nohup through SecureShell.
Thanks,
Wing

You can define the timeout of the BP-Methods that is actually the value that should be used for the method in your automatic activities. This is configured into the Engine preferences and it's the Maximum BP-Methods+ Timeout parameter, both for the studio and the enterprise.
Remember to handle the timeout exception when using this parameter. If not correctly handled, your process will abort.
HTH
Giuliano

How long should it take to get my old number back ...

I moved house 4 working days ago. New house is on same exchange as old, sa asked to keep my old number.
The order is apparently in two parts:
1) Cease line at old address - done on day "1"
2) Connect new line at new address - engineers "cancelled" on Day 1. No reasons given on the order and I wasn't contacted to tell me all had gone to a ball of chalk..... I'd have been none the wiser had I not bothered to check.
Over the weekend I spoke with various people, leading to a new order for a new line, to be installed on day "4" (today). It wasn't possible to pull my old number out of the allocatable pool (presumably (good!) it was still allocated to the cancelled order?) The engineers were "asked" in a note on the order to move my old number back onto the line.
This line is now up and running on a temporary number.
As my O2 broadband reconnection is waiting till I have a line with a stable number on it and I am keen to get it back asap, how long should I have to wait? Is there anything that could happen that will sabotage getting my number back and what should I do to prevent this?
Jon

I am with you on this and am very interested also as to the answer.
I was originally with BT, then moved to Sky as I wanted Sky TV, and thought it best to get the complete package. They never once mentioned, "oh by the way if you move home you lose your number". I think they should highlight this, and then watch there customer base drop.
Anyways, that aside. I have decided to come back to BT, and BT have created a new number at my new address, and when the line is activated I have to call to get a renumber and hope that the number I want hasn't been taken.
i presume by law Sky have to put the number back into the pool, and therefore should be able to get BT to get it back. Fingers crossed.
What reasons could there be that they cant get the number back.

How long should upgrade to Yosemite take?

I have downloaded Yosemite from the AppStore and on my initial attempt to install got to the point of having a grey screen with apple in the middle and a progress bar which stopped about 1/4th the way to completion. I let it run overnight after reading posts online indicating that it should resolve itself with time. After over 12 hours, I restarted the late 2012 MacBook Air and it would immediately go back to the same point in the installation. I then booted to the recovery disk and restored Maverick from my TimeMachine. I have tried to install again and have been stuck in the same spot for over 12 hours. I've tried entering Command-L to observe the log file with no change in what is being displayed. How long should I wait?

Install after download seems to take around a half hour. Of course it will depend on your hardware.
Phil

I am using a WD external hard drive for backing up my laptop with Time Machine, but I have to do it manually. How do I know when it has finished the back up? How long should it take?

I am using an external WD hard drive for backing up my laptop. I have to do it manually, so I can't set Time Machine to just do it for me. How do I know when it is done backing up? How long should this take?

Triple-click anywhere in the line below to select it:
tmutil compare -E
Copy the selected text to the Clipboard (command-C).
Launch the Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
Paste into the Terminal window (command-V).
The command will take at least a few minutes to run. Eventually some lines of output will appear below what you entered.
Each line that begins with a plus sign (“+”) represents a file that has been added to the source volume since the last snapshot was taken. These files have not been backed up yet.
Each line that begins with an exclamation point (“!”) represents a file that has changed on the source volume. These files have been backed up, but not in their present state.
Each line that begins with a minus sign (“-“) represents a file that has been removed from the source volume.
At the end of the output, you’ll get some lines like the following:
Added:
Removed:
Changed:
These lines show the total amount of data added, removed, or changed on the source(s) since the last snapshot.

How long should a deployment build run

Similar Messages

Maybe you are looking for