How make a new report in discovere?

Hi
I am new in discovere and have database,discovere administrator and BI tool install on my system. Please tell me from where i can open discovere tool and create a simple report from my database.
Regards

Hi,
There are two ways
1.Desktop
2.URL
For 1 one very simple install Discoverer administrator and create a EUL in the Data base.
Then use Discoverer Desktop to create new report.
For 2 You have to install a application server and do the same step of 1 ( as given above) and viewer can use the URL to view the reports.
Thanks,
Himanshu Tiwari

Similar Messages

How to delete duplicate reports in Discoverer created by APPS?

I am a functional anyalst and new to Discoverer. I have created several reports in Disco Plus and some how users are seeing duplicate reports, one under my name and two under APPS. I'm not sure how this happened. I suspect it may have happened when copying the EUL's related to the reports. The EUL's are all owned by APPS. I can not delete the reports since I'm not the owner. I've asked our DBA to search for the reports but he was not able to find them. How can we find these reports created by APPS and delete them? Thanks for any help.

Hi ,
RSZDELETE tcode is used to delete the query as well as work book also.
when you are deleting the query it will ask for work book also.
Thanks & Regards,
Ramnaresh . P.

How to publish a report from Discoverer to Oracle App. Server

Hi,
I am just getting into this. I glanced through admin & desktop user guides(10g Release 2 (10.1.2.1)) for information on how to publish the end report developed using discoverer desktop onto Oracle Application server?
Do anyone of you know which tool allows me to do that?
( perhaps, this would be a silly question to ask. But I got a bit inpatient in knowing about it)
Thanks,
Sun

You are correct, the viewer will provide that functionality, it is a web tool that they can use to view the saved workbooks.
There are some differences between the plus and the desktop, for example:
1. The desktop should be installed on every end user computer in order to run reports while the plus is installed on IAS server and all the user referred to it.
2. you cannot install the desktop on any operating system other then windows.
3. there are functionality differences between the 2 apps like: in the desktop you can perform sub query that you cannot create in the plus (you can use a pre built)
4. in the desktop you can save the workbooks locally, in the Plus you can save to the database only.

How to call Report 6i/9i Oracle Standard Report into Discoverer 10g

How to call Report 6i Standared report into Duscoverer 10g as there is a requirement to create or transfer Oracle Standard report into Discoverer.
1) Account Analysis Subledger Details(180 Char) - Standard Report 6i as i want the same report in Discoverer 10g.
2) Aging Report -- 7 bucket --Standard report in 6i,how to transfer in Discoverer 10g.
Is is possible to Transfer from Report 6i to Discoverer or How to Create this report in Discoverer 10g.
Please advice,
Sushant

Well, if I had to do it, here's how I'd start.
1. Get the SQL from the Oracle Report and then create a database view that's more generic based on the SQL but still gets the answers.
For example, you'd not code many conditions, etc. but the database view would be pointing to the correct Oracle Apps tables / views.
Once you've got the view, bring it in to Disco Admin, etc. and create a report from it that now adds the extra conditions needed. That way you can use the underlying concept without hard coding things like dates, etc. which you would ask the user at run time.
However ... as you may well know ... Oracle Reports can do some 'strange and/or powerful things' on the fly and, for example, it may be something like a temporary table generated for the report, etc. so may become a much bigger issue.
2. If you have NoetixViews views then they'll most likely already have the views for these queries already created as they're reasonable for what's needed in an Oracle environment.
3. I'd see if there is already a pre-defined BIS view that covers this as well. Again, you're in an area that's pretty popular so if a BIS view already covers much of the same info then you've got a create view 'head start' already. Check views owned by Apps starting with the application plus FV or FG (the one you'd really want) such as: GLFG_Budgets_To_Actuals to see what I mean.
Russ

How to link the reports to portal

Hai Friends...
I generated reports using discoverer plus and i viewed the reports using discoverer viewer . I am new to discoverer viewer.
Any body done please give me steps for how to deploy the reports in discoverer viewer and how to link the reports to portal.I wouid appreciate any help.
Cheers
Gopi

hi gopi,
u can store ur reports in the database using Discoverer user edition. these stored reports can then be viewed in the discoverer Viewer. here i am assuming that u have configured ur discoverer viewer correctly.
bye..
naresh

Develop new Report for Summarized JIT (Just In Time) calls

Hi to all,
Can anybody kindly tell me how to develop new report for summarized JIT (Just In Time) calls.
Thanks in advance,
Regards
Simi

I think it is a good feature, but I'd like to make some suggestions.
1) When the dialog pops up (like your attachment), it would be nice if I could tell it right then that I don't care about that advice. Right now you have to click on the link and then say you don't want the advice in the future. I think it is that extra step that is really annoying. I think, like most people, my instinct is to just close the dialog. Then next time I run LabVIEW I have to deal with it again. After the 5th time dismissing the damn thing I turn it off.
2) It would be nice to have an easy way to turn JIT advice off for a particular session. For example, I'm called on to help get new employees up to speed in LabVIEW. When I sit down at their computer to help design/debug things, I would really like to turn off JIT advice but just for my session. I don't want to change the other persons settings.
3) It would also be nice to be able to turn off JIT advice without going to the options.
So, I guess what I would like is this. When the JIT advice dialog comes up, instead of only having the link to the advice I'd like to see some a button that will turn off this topic in the future, a button that will turn it off for this session of LabVIEW and a button that will turn JIT off for good (with a verification dialog).
So, experience programmers with a new install will just turn it off for good the first time it pops up. Experience programmers on someone else's machine can turn it off without messing up the other persons ini file and I can leave it on when LV8 comes out and just dismiss the old advice quickly as it comes up.
Pat

Activity Universe + Audit / Creating a new report

Hello.
We are using the audit & Activity universe reports, but some user have asked to make a new report that is not in the packaged reports in the Audit folder.
He needs for all exisitng reports :
- report name
- date of the last refresh
- author of the last refresh
- and if possible ... the folder where is the report
They asked me too a list of all Users with their "Groups" related ...
is it possible to have report on the CMC datas ?
We are on BO XI R2 - ServicePack 5 - FixPack 5.6
Thank you very much

Hi !
Thanks to everyone who answered to my question, I was able make something now.
I have one more problem with my query on the Activity universe : I always have the old reports (deleted or moved into another folder), even with the condition even_type_id = 65543 = "Object deleted" !
Here my query on BO :
SELECT DERIVED_DOCUMENT_NAME.Detail_Text, AUDIT_EVENT.User_Name, max(trunc(AUDIT_EVENT.Start_Timestamp)), TO_CHAR(TRIM(AUDIT_DETAIL.Detail_Text))
FROM (select AUDIT_EVENT.Server_CUID, AUDIT_EVENT.Event_ID, RTRIM(TO_CHAR(AUDIT_DETAIL.Detail_Text), CHR(0)) as Detail_Text
        from AUDIT_EVENT, AUDIT_DETAIL
        where (AUDIT_EVENT.Server_CUID = AUDIT_DETAIL.Server_CUID)
        and (AUDIT_EVENT.Event_ID = AUDIT_DETAIL.Event_ID)
        and (AUDIT_DETAIL.Detail_Type_ID = 8)
     ) DERIVED_DOCUMENT_NAME, AUDIT_EVENT, AUDIT_DETAIL
WHERE ( AUDIT_DETAIL.Event_ID=AUDIT_EVENT.Event_ID and AUDIT_DETAIL.Server_CUID=AUDIT_EVENT.Server_CUID )
AND ( AUDIT_EVENT.Event_ID=DERIVED_DOCUMENT_NAME.Event_ID and AUDIT_EVENT.Server_CUID=DERIVED_DOCUMENT_NAME.Server_CUID )
AND ( AUDIT_EVENT.Event_Type_ID = 19     /* Document refreshed */ )
AND ( AUDIT_DETAIL.Detail_Type_ID = 43 ) /* Object Folder Path */
AND (AUDIT_EVENT.Event_Type_ID <> 65543 ) /* Object deleted */
GROUP BY DERIVED_DOCUMENT_NAME.Detail_Text, AUDIT_EVENT.User_Name, TO_CHAR(TRIM(AUDIT_DETAIL.Detail_Text))
someone have an idea ?
maybe it's a parameter ?
Thanks again.

How to get the Report Names which use a Folder in Discoverer Administrator?

Hello All,
How could I get which Reports in discoverer Desktop are using a particular folder in Discoverer Administrator?
Or
How to know which Discoverer Desktop Reports are being derived from a folder in Discoverer Administrator?
We have Oracle 9i DS installed and have a Custom Folder Created in the Administrator, and want to know exactly which Reports/Workbooks are using that folder?
Thanks in advance :)

Well Abhijit,
The eul workbooks have been created by oracle specifically to analyze your eul and make your work easier!. So, I prefer this way to view the information about my eul in a report format in the desktop. Try it! you may like it.
If you want you can follow these steps:
Run the script called eul5.sql located in <discoverer_installation_path>\discoverer\util in the user who own the eul in the database.
Then import the eul5.eex file located at <discoverer_installation_path>\discoverer\ in the discoverer administrator.
Then login into desktop and open the reports in the database, you can see a report called[b] EUL Workbook Management. Open that and goto the sheet named Workbook Dependency - Folders & Items Lookup. I think it the last but one worksheet in that workbook.
Hope it helps you!

How to use "machine name" in new report vi?

I have a computer on a network that has Microsoft excel installed. On another computer I have an application that will take an excel file and stuff a bunch of data from a database into specific cells to generate a report. The vi works fine on my computer (where excel is loaded locally) but when I try and run the VI and access excel remotely I get an error message as follows:
Error -41106 occurred at NI_Excel.lvclass:new report subVI.vi -> NI_report.lvclass:New Report.vi -> printTestSheet.vi
Possible reason(s):
Report Generation Toolkit: Microsoft Word or Excel did not open. Make sure Microsoft Word or Excel is installed.
Error -41106 occurred at NI_Excel.lvclass:new report subVI.vi -> NI_report.lvclass:New Report.vi -> printTestSheet.vi
Possible reason(s):
Report Generation Toolkit: Microsoft Word or Excel did not open. Make sure Microsoft Word or Excel is installed.
I have included the ip address of the remote machine to the "machine name" input of the "New Report" vi.
Any suggestions/solutions?
Gerry Thompson

Hi Gerry,
One reason that you may get this error is if Distributed COM wasn't enabled on the remote machine. See this Microsoft KB for how to check or enable that functionality.
If that doesn't help; let me know, and I'll try to setup a similar test case on my end. The process isn't well documented, and I haven't seen any existing examples, so I'd like to see what it takes to get it running.
All the best,
Fred V -- Product Support Engineer -- LabVIEW R&D -- National Instruments

How to add new text field in standard report

how to add new text field in standard report?

Hi,
I presume you are talking about a report display in ALV and u wish to add a column to it .
If it is a global requirement ,as in table being used there in ALV can be modified, then you can append the table and the system should pick up the same automatically from there.
Otherwise , you can make a Z program . Modify the catalog being used in ALV.
Regards,
Shweta

How to make a new recovery partition on a 600 series

Well I thought this was worth a mention as nobody seems to have said it could be done.
Having just got the cheep 600 series unit working I wanted to restore the RESTORE PARTITION.
Mostly to get the F11 function working as it should after fitting a Brand new HDD.
The OS is WIN7x64 but I would guess the same could be said for others.
It is actually quite simple and perhaps has been described in better detail elsewhere but here we go.
Oh, I actually did this a few different ways and got some very interesting results,
including one that needed the F11 pressing before boot or it would fail to load windows after the recovery.
Nice little hidden security function.! But breaks the restore ability !!!
If you want to disable the F11 recovery option then you need to rename a file.
Perhaps not disable but MakeFail !
So the way it seemed to work goes like this.
You will need your Original Restore DVD's (Cd's) for this if I did not assume that already.
With your new hard disk you need to partition it into three parts.
Either do it in the machine with a bootdisk (BartsPE) or similar
or for quickest results pop the drive into a caddy and do it on a live machine.
If you need to be told how to partition the disk then ask. (Right click My Computer, select Manage)
OOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOO
NOTICE: >> THIS IS GOING TO DESTROY ANY DATA ON THAT DRIVE ...
OOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOO
Make these in order.
partition 1 = 100 meg PRIMARY, UNFORMATTED, NO LABEL, NO DRIVE LETTER.
partition 2 = ??? PRIMARY, UNFORMATTED, NO LABEL, NO DRIVE LETTER
(calculate size from remaining space less partition3 size)
partition 3 = PRIMARY, NTFS, ANY LABEL, ANY DRIVE LETTER.
(This needs to be large enough for ALL your recovery disks plus a little more.)
So if you only have one Restore DVD make the third partition about 5gigs.
If you have two 10 gigs and 3Dvd's perhaps 14 or 15 Gigs.
Add some more space if you want to store more stuff on that partition.
Format the 3rd partition, then copy in order ALL the restore disks to the NEW drive.
You can also copy other files to this partition if you want.
Best to keep it tidy and make a new folder for your own stuff.
Stuff like AV installers, Updates, Application installers.
The Recovery process will HIDE ALL folders on the recovery drive but they will still be there.
So that should be it.
You have got 3 partitions?,
You copied all the DVD's to the 3rd one,?
NOW..
Reinstall the drive to the machine.
Put in the "Recovery 1 DVD" and boot the machine.
When asked if you want to use the recovery from disk or harddrive,, select DVD Disk.
Once the install is complete the F11 button on bootup should now work error free.
Well ,, it did for me...
Brand new hard drive with a full system recovery option made from only the Restore DVD's.
I did another system restore via the F11 button just for the fun of it.
Just so you know the system restore takes less than a quarter of the time from HDD over DVD.
I was going to check the process of making another NEW set of DVD recovery disks from the NEW drive,
but perhaps someone else will do that and report back on their progress.
Hv.
I never knew who HP were until my workshop got filled with faulty equipment. !! I know who Apple are now too.

Depending on the software you use to clone will it copy the recovery partition or not ex SuperDuper does not.
You can always reinstall the OS on top of what you have. This will re-create the recovery partition without touching your user files, documents, photos, bookmarks etc. After that you may have to run the software update to get the latest OSX update 10.10.1
One draw back to no recovery partition is iCloud>Find my Mac will not be functional.
From option command R on start or from an installer SD card you created.
Recovery http://support.apple.com/kb/HT4718

How to use a repository in a new report

Hello,
I am starting to learn OBIEE and installed it in my home environment. I installed OBIEE, and used the RCU to install a repository in an Oracle database.
Then, I used the BI Administration tool to make a 'repository' which connects to my data (also in an Oracle database).
In the BI Administration tool I now have a physical layer, a business model and mapping, and a presentation layer. I saved this as a rpd file on my harddisk.
Then, in the Oracle BIEE Home I choose 'New report'. But I cannot find how I can choose my 'repository' with my data. I also tried to make a new datamodel, but here I am also not able to choose my repository.
How can I connect to my data in a report ? How does it work ?
Many thanks in advance,
Best Regards,
André.

You are totally getting Confused..
Have these understanding first.
You have DB installed.
You will create schema(Two users) in DB using RCU(Repository Creation Utility:Basically stores metadata required for OBIEE).
You will install OBIEE and use these schema there.
Above installation installs weblogic and then deploy BI files to weblogic to make them work.You should remember weblogic password.
Now when you open up Admin tool --Repository password should be 'Admin123' (A in capital) and username is weblogic and password should be weblogic password.
You will be able to open up the RPD in online mode.
I suggest you to first go through the Architecture of OBIEE and then start installation and start exercises.
mark correct or helpfull if it helps.Also let me know if you were able to open RPD and answers.
Regards,
Veeresh Rayan

How to add new customise field in standard SAP ME28 Report?

Hi Anybody,
How to add new customise field inside Standard SAP Screen report ME28?.
Anybody, Please tell me how to do?.
Thanks,
Regards,
S.Muthu.

Hi Subramaniyam,
You can find enhancement in me28 by following steps and then apply your logic in include of this enhancement.
cmod>Give a project name>in enhancement column give the package name ME >f4>in package write ME-->ENTER>It will show you all enhancements available in me28> find which ever suits your requirement>save > click on components> from there you can make changes in include program.to add that particular field.

Reg:HOw to add new charactersitics in standard report

hi all
HOw to add new charactersitics in standard report
regards
JK Rao

You need to copy the std report and make necessary changes in the copied report. SAP does not allow changes to std report. The technical details of the report can be seen by selecting from the menu Extras - technical information. Select the library and Report name. Copy the same using t code GRR1. Carry out necessary changes and SAVE. Before execution, you will have to specify the report group in which report needs to be attached. You can choose and existing group or specify a new one.
Regards
Rakesh Pawaskar

How to make cross Tab report for SAP B1

Hello and Hi
i trying to make cross tab report for SAP B1 but test column not appera in
File >>New >>Cross Tab Report start cross tab report creation wizard select database name and table
but only numeric columns appear in available column fields , how will appearall fields including test fields..

i got solution
thanks google
memo type field will not apper in list .use bellow statment to convert in interger or char type
convert(int,U_Dist_Sr_No) AS Dist_Sr, CAST(U_Dist_Name AS varchar(250)) AS Dist_Name,

How make a new report in discovere?

Similar Messages

Maybe you are looking for