How Many Installs Allowed/ How To Apply to 3 different Macs?

Since we are no longer dealing with a disc, can you install the new Lion upgrade on 3 different Macs, purchasing only one for the $29.00, or do you have to buy Lion for each individual computer? If you can install onto other Macs with one purchase, how do you install on each individual Mac? Thanks for any advice

You are allooweed up to 5 Macs.
However beware as the installer self distructs on use so you have to clone it *before* you upgrade.
Simply Download from the Applestore and copy the installer to your two other Mac *then* run it.
Make sure you do all the pre-installation checks, upgrades, compatibility checks and backups before you upgrade.
Regards,
Shawn

Similar Messages

How many installations allowed?

How many different Macs can I install a single-user version of iWork on? I have a laptop and desktop, both of which belong to me. Can I install the same single-user version on both, or do I need the family license?

Bummer. I know for Aperture, you can install the same copy onto multiple computers, though you can only use one at a time if they are on the same network. Is this same for iWork or is it really one installation per copy?

How many installations allowed on same "machine" if hard drive is replaced?

I recently had to reinstall my Adobe Creative Suite 3 Web Standard on my same laptop when I replaced a bad hard drive. Now I find out I have to replace the hard drive yet again (freezes up, tech guy thinks its been knocked around too much). I've googled around a bit and have read that I can install my (limited, student licensing?) Adobe software on two "machines". What is meant by machine? If it's the same computer, is it the same machine if I have to put a new hard drive in it? In other words, will I be able to install this a third time on the same computer if I've done so twice on two different hard drives?

What you should do is contact Adobe Support using chat and ask them to reset your activations. That way you have a fresh slate of two waiting for you to use.
The limit of two machines is a continuous limit, not a one time limit, meaning as you change machines you can move your license as needed. Normally you would deactivate an installation (by selecting Help -> Deactivate), but when a machine dies you lose the ability to deactivate. Adobe support can take care of that by resetting the activations.
For the link below click the Still Need Help? option in the blue area at the bottom and choose the chat option...
Serial number and activation chat support (non-CC)
http://helpx.adobe.com/x-productkb/global/service1.html ( http://adobe.ly/1aYjbSC )

How to apply temple to different standard layouts

I'm trying to determine best design way of doing the following on a new site:
I wish to create a template with top banner and bottom footer. Then I would like to apply the template to the standard dreamweaver pages created by File>>>New.
This is what I have done unsuccessfully so far. I have created a new 1 column fixed, centered, header and footer HTML page. I have inserted my banner in the Header and adjusted margins and padding in the Header. I then created an editable region at <div id=" maincontent">. I then saved this document as a dwt.
So far so good. I then created a new HTML 1 column fixed, centered, header and footer HTML and applied the previous template. Perfect.
I then repeated the process of applying my original template to a new 2 column fixed, left side bar, header and footer.. The left side bar was lost in translation. I have repeated this process multiple times varying which document I would start with.
Nothing worked and its clear to me that I'm missing one or more big concepts here. Can someone point me in the right direction. Sorry if this the the wrong posting group. I'm new to this but can learn. Thanks. M

This is what I have done unsuccessfully so far. I have created a new 1 column fixed, centered, header and footer HTML page. I have inserted my banner in the Header and adjusted margins and padding in the Header. I then created an editable region at <div id=" maincontent">. I then saved this document as a dwt.
There are two ways you could have done this:
Used FILE | Save As, browsed into the Templates folder and saved the file with a *.dwt extension
Used FILE | Save As Template
Which did you use? The first is wrong and will not work. The second is the only way you should do this.
Nothing worked and its clear to me that I'm missing one or more big
concepts here. Can someone point me in the right direction.
The best way to do what you want is to START with the template, and use FILE | New Page From Template to create the child pages. Applying a template to a page with existing content is going to make you nuts - it can be done, but you have to really understand how templates work to do it. Nevertheless, if you have a page with content and you want to bring that page into a template's control, the BEST way to do would be to spawn a new child page from the template, copy and paste content from the original page into the new child page, and then save the new child page with the old page's name.

How to apply metrics for different platform

Hi,
If a metric has different code for different platform, or the metric only runs on some specific type of system, how can we apply it to a group of hosts?
For example, I have a metric that checks only Sun T3 types of systems. I can create a group of hosts that are T3 type system, but how do I apply the metric to this group?
The other example is the way to collect data is different for Soaris and Linux platform, can I have 2 metrics, one apply to the group of Solaris machines, and the other apply to the group of Linux machines?
Thanks.

Hi,
You can use EM groups and monitoring templates to accomplish what you want to do. For example, create a group for Solaris hosts and a template to push out appropriate metric settings for the group.
Documentation links:
- EM groups:
http://docs.oracle.com/cd/E24628_01/doc.121/e24473/group_management.htm#DAFHBFCB
- Monitoring templates:
http://docs.oracle.com/cd/E24628_01/doc.121/e24473/monitor_overview.htm#sthref38
Regards,
- Loc

How do i get a different mac computer to recognize my ipod?

I have recently gone to college and did not take the computer that I had used at home, which happened to be a dell, and now I am using an iMac. When i tried to plug in my iPod shuffle a window popped up saying that it had to delete all the songs to recognize the iPod in iTunes. How can I make this computer to recognize my iPod without deleting all my songs?

You can't, it is designed to work with only one computer/library.
After you tell it no, you can download 3rd party software (such as el ipodo) that will let you copy the songs as files to the mac, Add them to the Library, then, if you want to use iTunes, connect the Shuffle again and say Yes to link it. Your songs will be on the Mac and you can copy them back to the Shuffle.

How many installations of Logic 9 are allowed?

How many installations of logic 9 are allowed? I have it running on two macs and am considering a third. Of course I only use one at a time. Do I need to uninstall one? I don't believe I ever registered the current installations with online registration.... How does all this work?

Yes.. the code was present in all versions of 8 and 9 up to 9.1.6 when it was removed/disabled...
Once you update LP9 to 9.1.6, 9.1.7 or 9.1.8 then that network check code is no longer functional.
LPX can be installed and run on as many Macs as you use/own.... using your Apple ID that you initally used to purchase it...without any limitations.
(Note: The App Store T&Cs determine this type of use is fine so long as you are using LPX for Private/personal use and not for example.. in a public studio... in which case you should purchase a multi user license...)
I often run LPX (and LP 9.1.8 for that matter) on several Macs here when testing stuff... at the same time without any problems...

CS5 Student Master Suite - How Many Installs

I'm purchasing the CS5 Master Suite Student edition and was wondering how many installs you get. I have both a high end laptop and a desktop at home. I would like to be able to use the more powerful desktop when at home but the laptop while not at home.

Student Teacher is Academic...sorry. There is a cheaper student only version that only gets one activation. You can find all of the student/teacher versions at the Adobe Education Store
Note that you must provide proof of eligibility to purchase the product. Adobe even allows commercial use of the software.
Hope that helps.
Bob

I lost my laptop to water damage. how many installations do i get with PS CS6?

i lost my laptop to water damage. how many installations do i get with PS CS6?

You can get 2 activations count which allow you to install and use the Adobe software on 2 computers.
So, you can install the PS CS6 on the new computer without issues.
You can also contact Adobe Support to get the activation count resetted so that you can use the software on 2 computer again.

How to apply an Outlook 2013 Open license to a pre-installed Office Home and Business 2013 installation for Email Auto Archiving functionality

We're deploying new Dell pc's.
Unfortunately we have a large existing install base of Office Home and Business in the field due to customers buying Office bundled on Dell machines. Buying Open License Outlook licenses is more cost effective than upgrading to Office Pro Plus for all
these users and is our preferred path. We aren’t sure how to apply these Open License Outlook licenses since the Home and Business installations work off a single license key for all the applications

Hi,
Isn't the Office bundled on Dell machines already activated?
If it's the OEM version that has been installed on the machines and you want to use retail product keys to activate the Office, it's not possible. You will need to uninstall the OEM version and install the retail version.
You can check the OEM licensing system here:
http://www.microsoft.com/OEM/en/licensing/productlicensing/Pages/office-2013-licensing-packaging.aspx
To find more help about OEM depolyment, I should recommend you to get contact with the OEM Reseller Support System
http://www.microsoft.com/OEM/en/Pages/contactus.aspx
If I misunderstood anything, please feel free to post back.
Regards,
Melon Chen
TechNet Community Support

How many optional allowed in the query?

Hi,
Data base is getting disconnected while running the below sparql query (Query with 9 optional conditions).
I tested the query with 5 optional its working fine but, its not working for more than 5 optional.
How many optional allowed in the query?
Please advice me to solve this problem.
Error Detail: ORA-03113: end-of-file on communication channel
SELECT bi, OWNER,name,usage,notes,icto,app,ssd,ssdname,ssdid,sdname,sdarchitect,schedule
FROM TABLE (sem_match('{
?bi rdf:type di:Bulk_Interface .
?bi di:hasBulkInterfaceItOwner ?OWNER .
?bi di:hasBulkInterfaceName ?name .
?bi di:hasBulkInterfaceRecipientApplicationArea ?usage .
?bi di:hasBulkInterfaceRecipientFeederType ?notes .
?bi di:hasBulkInterfaceSupplierApplicationId ?icto .
?app ds:hasConceptualSourceApplicationIctoId ?icto .
?ssd ds:hasConceptualSourceApplication ?app .
?ssd ds:hasConceptualSourceSubdomainName ?ssdname .
?ssd ds:hasConceptualSourceSubdomainIctoId ?ssdid .
?sd ds:hasConceptualSourceSubdomain ?ssd .
?sd ds:hasConceptualSourceDomainName ?sdname .
?sd ds:hasConceptualSourceDomainArchitect ?sdarchitect .
?bi di:hasBulkInterfaceDeliverySchedule ?schedule
optional {?bi di:hasBulkInterfaceRecSet1AverageStorageRequirements ?avgsize}
optional {?bi di:hasBulkInterfaceWorstStorageRequirements ?maxsize}
optional {?bi di:hasBulkInterfaceRecSet1AverageNumberOfRecords ?avgrec}
optional {?bi di:hasBulkInterfaceAverageNumberOfRecords ?avgrec}
optional {?bi di:hasBulkInterfaceRecSet1WorstNumberOfRecords ?maxrec}
optional {?bi di:hasBulkInterfaceWorstNumberOfRecords ?maxrec}
optional {?bi di:hasBulkInterfaceTransferMethodJob ?job}
optional {?bi di:hasBulkInterfaceDataFileAvailability ?post}
optional {?bi di:hasBulkInterfaceBusinessDescription ?descr}
sem_models ('IFM_CURR', 'SRC_CURR'),
SEM_Rulebases('OWLPRIME'),
sem_aliases(SEM_ALIAS('di','http://www.cse.com/sbip/dwh/mdm/data_interface#'),
SEM_ALIAS('ds','http://www.cse.com/sbip/dwh/mdm/data_sources#'))
, NULL));
Let me know if you need any other details.
Regards,
Kavitha.
Edited by: 789259 on Aug 3, 2011 2:01 AM

If possible, I would suggest that you upgrade to the latest release: 11.2.0.2.0. It has many bugfixes and enhancements.
There is no limit on the number of optionals per query. I suspect that the use of the same new variables (?avgrec and ?maxrec) in the parallel optional clauses is the reason you are seeing the error in this particular case. If you use different variable names does the error go away? If needed, you can use a coalesce in the outer SQL SELECT to get the same behavior as before (e.g. COALESCE(avgrec1, avgrec2) as avgrec).
Thanks,
Matt

How many installs do I get with a Creative Suite License

How many installs do I get with a Creative Suite License and if more than one can I put a copy on MAC and Windows?

Hi Isendusersup,
You can install software on up to two computers. These two computers can be Windows, Mac OS, depends on the Platform for which you bought the product (Creative Suites License ). For Creative Cloud subscription, it can be any two platforms.
If you install on a third computer, it will request you to de-activate on the other two computers. You can then reactivate one of the previous two computers, and use Creative Suite license or Creative Cloud apps on it.
For Creative Suite - To deactivate from preinstalled machine, Open any Adobe CS application > Help Menu > Deactivate.
For Creative Cloud - To deactivate from preinstalled machine, Open any Adobe CC application > Help Menu > Sign out.
Let us know if you need more assistance.
Thanks!
Eshant

How many group policies can be applied to an OU?

Hi,
I just want to know about how many group policies can be applied to an OU?
I have 7 different GPOs but only 2 or 3 are applied. How can I troubleshoot this problem?
reg
A

GPOs are actually applied by users or computers. Each object can process 999 GPOs. If you have GPOs not being applied, it most likely is a scoping issue.
Check out this guide and let me know what you find:
http://deployhappiness.com/top-10-ways-to-troubleshoot-group-policy/
If my answer helped you, check out my blog:
DeployHappiness. Subscribe by
RSS or
email.

Sql Server 2012 Evaluation - How many connection allowed ?

Hi all
I'm testing the replication, everything Works fine, but I'd like to know how many connections allow the evaluation of the SQL Server versión I'm testing on.
We are testing 2 stores with 2 server in replica with about 20 users in each side. So we can get an idea of the prices of the licences my customer have to buy.
Thank you very much.
James Smiths

SQL 2012 license usually is per core and/or per CAL and it depends on the edition.
All editions don't impose any limit on connections but rather on maximum memory, CPUs and other features.
You need first to decide which SQL version suits your needs (and your hardware) and then call for suggestions and prices.
http://www.mssqltips.com/sqlservertip/2942/understanding-the-sql-server-2012-licensing-model/
http://www.microsoft.com/en-us/server-cloud/products/sql-server/buy.aspx
"If there's nothing wrong with me, maybe there's something wrong with the universe!"

How many installations do I get with Creative Cloud?

I am currently using CS5 Master Collection. When I purchase the product, I have 2 installations (I use one on my desktop and one on my laptop). Do I still get at least 2 installations with Creative Cloud so my workflow can continue?
Basically, how many installations so I get with one subscription?
Thanks.

You can activate Cloud apps on a maximum of two computers.
The big difference with the Cloud is that it's not platform specific: i.e. you can install on Win/Win, Mac/Mac or Win/Mac.
http://www.adobe.com/products/creativecloud/faq.html
Are there any unique benefits that come with my paid membership?
Yes, as a member of Creative Cloud, you get many benefits that you do not get when you purchase a traditional shrinkwrapped product:
Access to both the Mac OS and Windows® versions of the desktop applications and the ability to install them on your primary computer and one backup computer. So, if you have a Mac at home and a PC at work, you can install your applications on both as long as they are not running at the same time. See the product license agreements page for more information.
Perpetual licenses are platform specific: Win/Win or Mac/Mac only. Win/Mac is not possible.

How Many Installs Allowed/ How To Apply to 3 different Macs?

Similar Messages

Maybe you are looking for