How many receiever determination steps.

Hello Everybody!
              This is the first project that i am implementing, So i need guidance from you all
I am implementing a scenario wherein:
1) Data is passed from R/3 to xi and then to a web server.
2) From webserver the updated data is sent back to xi.
3) A particular field is boolean checked in XI, if true the data is sent back to webserver.
4) and then again the updated data is sent back to r/3 via xi.
R/3 ---> XI ---> Web Server ---> XI -(If condition true)-> Web Server ---> XI ---> R/3
R/3 ---> XI ---> Web Server ---> XI -(If condition false)-> XI ---> R/3
I have thought of using RFC adapter then BPM and then soap adater.
BPM process is shown below:
Start > Receive (Async) > Send (Sync) > Send (Sync. This step only if boolean true) > Send (Async) > Stop.
Now could you guys pls advice me on how many Receiver determination steps,Sender aggrements, receiver aggrements and interface determination steps are required.
Also now that this implementation is for a product that would be released in the market, do i need to use business systems or business service as the sld may vary for company to company. 
Any comments???

hi,
>>>>Now could you guys pls advice me on how many Receiver determination steps,Sender aggrements, receiver aggrements and interface determination steps are required.
you should not worry about that
just use integration directory wizard
for every connection like:
from anything -> BPM
and from BPM -> anything
and it will create all ID objects for you
this way you will be sure that they are created correctly
Regards,
michal
<a href="/people/michal.krawczyk2/blog/2005/06/28/xipi-faq-frequently-asked-questions"><b>XI / PI FAQ - Frequently Asked Questions</b></a>

Similar Messages

  • How many Receiver determination in File to SOAP scenario

    Hi,
    I am trying a File -SOAP-File scenario, where file will be send to PI asynchronous. BPM is configured to receive the file and
    call the web services and get the response (Synchronous call) .After that BPM send the file asynchronous to File via FTP .
    It is basically asynchronous/ Synchronous bridge scenario.
    To do this I have  have configured the BPM  & created 3 Communication channel . 1 sender (File) & 2 receivers ( SOAP & File)
    But i got confused in Receiver determination. How many Receiver determinations do we require in this step?  2 or 3. If 3 how they will look like. I believe Interface determination is same as Receiver determination. I am suing Business System to send & recv the file.
    Points will be rewarded for suitable answer.
    Thanks

    hi,
    You require 3 receiver determinations.
    one from File to BPM(XI)..
    another from BPM to SOAP and other from SOAP to FILE.
    This is exactly the same scenario.
    RFC Scenario using BPM --Starter Kit
    Thanks,
    Vijaya

  • How does Receiver Determination Step in BPM work?

    Hi,
    I'm still in trouble with the Receiver determination step in the BPM...
    Normally, when you use the send step, it sends the message in the flow context. Am I right, when I suppose, that when you put the receiver determination step before this send step, the send step sends the message in the context of the receiver determination - that means: if in the Integration Directory, there is receiver determination (with some conditions) and these are matched with the message in the send step, the send step sends it into the receiver, that is defined for the condition and not in the flow context... Right?
    Please, write me just your experiences and not links to the documentation. I read it all, but... :O(
    Thanx 4 your help, Peter

    Hi Peter,
    The receiver determination step is used to get a list of receivers for a subsequent send step.It makes a call to the receiver determination you configured in the Integration Directory and returns the receiver list.
    Here you specify the send context and the multiline container element for the receiver list.
    The send context is a string.The send context can have any string value and depending upon the condition in recvr determination you can route to multiple receivers.
    Regards
    Priyanka

  • A running count of how many steps processed?

    Hi, I'm using labview to monitor where I'm at in my teststand sequence. I have several goto statements in TS, meaning that certain steps are executed several times. I'm already using the Step.Index to find out which step I'm on, however I need to keep track of how many times that step has been called(goto loops). Is there a count index that increments for each step processed, regardless of goto loops? I've tried, the Loop.Index however it does not keep track of the Goto loops. Thanks for any help.
    Joe

    Joe,
    Teststand does not expose a variable that keeps track of how many times a current step has been executed in a Goto Loop. However, it keeps track of how many steps have been executed so far. This information is store in the property RunState.NumStepsExecuted. If you now how many steps are included in your loop, and if you also know the number of steps executed so far, then you can calculate the current iteration of your goto loop.
    Hope this helps,
    Alejandro del Castillo
    Ni

  • Is there a way to find out how many steps you walked on a specific day in the Apple Health App.  I don't want to know minute by minute.  But want to know if I can go back a week to a certain day.

    LF way to see how many steps I walked on a certain day last week.  Not minute by minute, just recall the day's steps.  All I get is a graph and then all data when I tap a particular day,  which is far too detailed and useless.

    here is a link to macosxhints.com that tells you how to output all of your feed URLs to a terminal window. from there you can cut and paste them into your new feed reader of choice...
    http://www.macosxhints.com/article.php?story=20080319094830396
    and if you are in the marked for a new reader may i suggest David Watanabe's excellent NewsFire. he had just recently made it totally free as a gift to the macintosh community.
    best of luck.

  • HT4059 Being new to iBook publishing I need to know if stats are available to determine how many times my iBook has been downloaded. Can anyone help please? Mr Ignorant

    Being new to iBook publishing I need to know if stats are available to determine how many times my iBook has been downloaded. Can anyone help please? I need to persuade someone that this really is worthwhile. Mr Ignorant.

    The only people who can possibly assist you with this is Apple Customer Relations, call your local Apple contact number and ask for Customer Relations then explain your situation clearly and politely (be firm but don't rant).
    You might want to investiage what the local laws are regarding defective goods and 'fit for use' definitions on warranties etc. Consumer Protection can be a useful tool to use or bargain with if needed ...

  • How to use Receiver determination step in the BPM?

    Hi!
    I'm not sure, how to use the receiver determination step in the BPM... What is it good for? I have read the documentation, but I still don't know, what is it good for.. A little example would be great!
    Thanx, Peter

    Hi,
    >>I have read the documentation,
    but have you seen the example?
    http://help.sap.com/saphelp_nw04/helpdata/en/11/13283fd0ca8443e10000000a114084/content.htm
    Regards,
    Michal

  • How many steps can be recorded in the History panel?

    In Photoshop, 20 steps can be recorded in the Histroy panel with the defult setting, and we can change the setting to record more or less steps by choosing "Edit> Preference".
    In Lightroom, how many steps can be recorded in the History panel with the defult setting? And how can we change the number of step to be recorded?

    I guess since the history is kept in the database (and not only in memory as with PS), there is not so much an issue in limiting them.
    Beat Gossweiler
    Switzerland

  • How to determine:how many connections will be needed in RFC adapter setting

    Hi XI guru,
    We are working on following secnario:
    1. JDBC sender selects data from Oracle database, and send this data to SAP XI, XI use async RFC receiver adapter to call a self made RFC, in this RFC, we will call some BAPI and process some ABAP code, then if the reture code is ok, nothing will happen( means data successfully import into SAP ). if the reture code is not ok, another RFC will be called from ABAP code, send an asyn message to XI, XI use RFC receiver to update the message back to Oracle with specific flag.
    2. Why we use this secnario is, we want to avoid using BPM, this scenario are mass happening in our project, BPM will slow down the performance.
    3. We also don't want to use sync RFC, because BAPI and ABAP code will take sometime to run, we don;t want XI want for the RFC reture message.
    The question is:
    We successfully run this secnario in unit testing, but when we work on stress testing,found some times we will miss the RFC call. For example:JDBC sender sends message to XI for 10 times in a very short time( we use fault data to make  every message has a send back RFC message in stress testing), let's say poll interval 5 sec one time. but send back RFC only be called 7 or 8 times, 2-3 message were missing.
    we get back to SXMB_MONI, see all JDBC sender 10 message are successful, and 7- 8 send back RFC messages also successful. No log in SM58 RFC monitor. Then we go to modify maximum connection, and set it to 5, means 5 RFC coconnection possible(as far as I know, this setting means like this, but of course I maybe wrong)
    Question is: how can I know how many coconnections I need to setup, and if some RFC calls are missing, is there any place whatever in XI or R/3 can help me to monitor the log, then I can know they are not successful for some reasons,but not just simply miss as they never happened?
    That will be helpful, if some one can tell the story of what happen RFC works at background.
    Thank you very much for your time and effort on this

    HI,
    Maximum possible number of initial connections required between sender system and adapter. This value is limited internally to a maximum of 50
    See the below links
    http://help.sap.com/saphelp_nw2004s/helpdata/en/67/6d0540ba5ee569e10000000a155106/content.htm
    http://help.sap.com/saphelp_nw2004s/helpdata/en/33/c6e63b60c25767e10000000a11402f/content.htm
    http://help.sap.com/saphelp_nw2004s/helpdata/en/a4/db833d4c47ea4ea1a9b7af3c535ff2/content.htm
    http://help.sap.com/saphelp_nw2004s/helpdata/en/6e/3f560a3e0f6f4a90fb1e7db1388d4d/frameset.htm
    http://help.sap.com/saphelp_nw2004s/helpdata/en/25/90d038f58f863de10000000a11402f/frameset.htm
    /people/swaroopa.vishwanath/blog/2005/03/11/rfc-migration-to-bapi-in-r3--step-by-step
    Regards
    Chilla

  • How many certificate in needed for push notification please tell me all steps ?

    how many certificate in needed for push notification please tell me all steps ?

    Your System Details shows;
    Installed Plug-ins
    Garmin Communicator Plug-In 4.0.4.0
    Garmin Communicator Plug-In 4.0.3.0
    Having more than one version of a program may cause issues.

  • How can I determine how many days are left on an evaluation Enterprise license key?

    I am using the evaluation key available for SP 2010 enterprise. However, I would like to be able to determine how many days remain before it expires.
    Is there a page/link/powershell command/etc. for getting that information?
    Thank you.

    well, I am surprised - and a bit disappointed - that there isn't powershell commands that report the situation.
    But, I can manually go through one machine to find the info, then figure out manually or via some web app when the deadline is.
    I would have thought if Microsoft wanted people to convert an eval to a commercial license so they would make the information appear on the front of central admin

  • Determine how many activations I have left on a 10 managed systems license

    I just purchased Apple Remote Desktop 3 from Amazon.com. It was used. I do I determine how many license I have left with the serial number? How do I disable the other computers, should there be any, from the previous owner? Russ

    Russ
    I think you may be slightly confused about how the 10-Client license works? Basically you can only manage and 'see' 10 client workstations when using ARD from an administrator's workstation.
    The serial number itself (or if you like its license) is used when launching ARD for the first time on a workstation you decided to install it on. It only applies to that workstation. You key it in when prompted. The license is not installed or used in any way AFAIK on any workstation you decide to control/observe/manage.
    Tony

  • Determin how many user log on the site using JSP/Servlet?

    Hi all,
    Is there a way to determine how many user log on the site using JSP/Sevlet? I'm running Apache 2.x & Tomcat 4.x
    I'm trying to get a list of user currently log in the site.
    Please help!
    Thanks,
    -JN-

    You could use the HttpSessionBindingListener interface. Every time a user logs into the session put a user object into the session. The user object will implement the HttpSessionBindingListener interface. When the user object is added to a sessiion it recieves an event and it increments a counter. When the session times out or you invalidate the session because the user has logged out the user object will recieve an event and it can then decrement the counter.
    This will at least tell how many active user sessions there are.

  • What determines how many bytes a 8451 reads during a SPI transaction?

    Hello,
      What determines how many bytes a 8451 reads during a SPI transaction? Depending upon the device that you are interfacing with the quantity of bytes that comes back varies.
    Regards,
      Kaspar
    Regards,
    Kaspar

    Hi Kaspar,
    What you described regarding the reading and writing of data from an SPI device looked correct - I posted a similar response on your other thread here.  Also, you are correct that each bit of SPI data will be transferred per clock cycle.  So, if you were to write a byte of data and then read a byte of data, you would expect to have 8 clock cycles per byte.  Hope this helps!
    Regards,
    Anna M.
    National Instruments

  • How can I determine how many events are in my calendars?

    The web version of my iCloud Calendar and subsequently also my Calendar.app did show recently various malfunctions and error messages that were inconsistant. Also, Calendar.app crashed when I was editing events. Finally, Calendar.app did complain that my iCloud account would be out of quota, and did direct me to this KB article:
    http://support.apple.com/kb/HT4489
    I did not know about these quotas before which are not really high and quite limiting for use over longer periods of time. After checking them, I think that my real data are below these limits. However, there might be one exception:
    - Total number of calendars, events, and reminders: 25,000
    25,000 sounds a lot, but when you devide by 6 events per day (which is easily reached if you combine family and buisness, and maybe repeated events also count for each repetition at least after editing), one ends up at 4200 days which is not much more than 11 years. I am using Calendar with data since the year 2000 (for some time I used Palm Desktop that took over the (very) old Mac Calendar application and imported/moved the data when iCloud Calendar became available).
    My questions:
    - how can I determine the number of events in my calendars?
    - which events do count in which way for the quota limit?
    - what about events from shared calenders - do they count if owned by another account?
    - what about repeated events which are partially edited?
    Thanks in advance for any hint!

    Hi there
    I ran into the same problem last year. The solution I used is available here:
    http://forums.macrumors.com/showthread.php?t=1693875
    Apple don't seem keen to tell you you've reached your limit and if you think that isn't helpful tough luck. I reached due to duplicate events being created. I didn't know what had happened until I eqnuired further on the above forum. Someone needs to create an event counter application. Perhaps they have. Would need to do a search.
    However I've now reached the limit again and I'm not sure why, cue more faffing around being required. That's one of the problems of using a Mac computer with an Android phone.
    As for the limit, it exists and if you dont like it you need to change the way you work not Apple. That's the impression I get. Alternatively use something else that has more generious limts. I don't know what that would be. I did consider moving my calendars to Google but it would have meant certain functionality would not work in BusyCal, the third part calendar application I use on my Mac computer.

Maybe you are looking for