How to determine:how many connections will be needed in RFC adapter setting

Hi XI guru,
We are working on following secnario:
1. JDBC sender selects data from Oracle database, and send this data to SAP XI, XI use async RFC receiver adapter to call a self made RFC, in this RFC, we will call some BAPI and process some ABAP code, then if the reture code is ok, nothing will happen( means data successfully import into SAP ). if the reture code is not ok, another RFC will be called from ABAP code, send an asyn message to XI, XI use RFC receiver to update the message back to Oracle with specific flag.
2. Why we use this secnario is, we want to avoid using BPM, this scenario are mass happening in our project, BPM will slow down the performance.
3. We also don't want to use sync RFC, because BAPI and ABAP code will take sometime to run, we don;t want XI want for the RFC reture message.
The question is:
We successfully run this secnario in unit testing, but when we work on stress testing,found some times we will miss the RFC call. For example:JDBC sender sends message to XI for 10 times in a very short time( we use fault data to make every message has a send back RFC message in stress testing), let's say poll interval 5 sec one time. but send back RFC only be called 7 or 8 times, 2-3 message were missing.
we get back to SXMB_MONI, see all JDBC sender 10 message are successful, and 7- 8 send back RFC messages also successful. No log in SM58 RFC monitor. Then we go to modify maximum connection, and set it to 5, means 5 RFC coconnection possible(as far as I know, this setting means like this, but of course I maybe wrong)
Question is: how can I know how many coconnections I need to setup, and if some RFC calls are missing, is there any place whatever in XI or R/3 can help me to monitor the log, then I can know they are not successful for some reasons,but not just simply miss as they never happened?
That will be helpful, if some one can tell the story of what happen RFC works at background.
Thank you very much for your time and effort on this

HI,
Maximum possible number of initial connections required between sender system and adapter. This value is limited internally to a maximum of 50
See the below links
http://help.sap.com/saphelp_nw2004s/helpdata/en/67/6d0540ba5ee569e10000000a155106/content.htm
http://help.sap.com/saphelp_nw2004s/helpdata/en/33/c6e63b60c25767e10000000a11402f/content.htm
http://help.sap.com/saphelp_nw2004s/helpdata/en/a4/db833d4c47ea4ea1a9b7af3c535ff2/content.htm
http://help.sap.com/saphelp_nw2004s/helpdata/en/6e/3f560a3e0f6f4a90fb1e7db1388d4d/frameset.htm
http://help.sap.com/saphelp_nw2004s/helpdata/en/25/90d038f58f863de10000000a11402f/frameset.htm
/people/swaroopa.vishwanath/blog/2005/03/11/rfc-migration-to-bapi-in-r3--step-by-step
Regards
Chilla

Similar Messages

How to determine how long an Oracle patch will take to complete?

Hello,
Does anybody know of a way as to how to determine how long a certain Oracle patch will take when it is applied?
Regards.

Another thing to consider is if the patch does any data conversion/inserts/updates/validation/etc. Running a patch against a small test instance with 100 users and 10,000 invoices may take considerably less time than it does against a production size instance with 22,000+ users and millions of invoices.
We try to test every patch against a production size test instance prior to implementing it into production.

How to determine who is connected via AFP in WORKGROUP

I am running a WORKGROUP configuration leopard server on a MP early 2008. Using the server widget I can tell if there are users connected but I have not figured out how to determine Who is connected and how to contact them if I want to reboot the server. Moreover, how do I determine what users are doing? The AFP log is turned off in this config and I can't get it to come on. From the command line I could use serveradmin to find out who is connected but in the workgroup config it is not clear if it is OK to run serveradmin since the GUI counterpart "Server Aministrator" is forbidden unless you upgrade to the advanced config. Does anybody know if the CLI serveradmin is OK to use in the WORKGROUP config or know any other way to determine who connected via AFP and SMB and what files they have open? This semms like a terrible security risk without knowing who is doing what.
Thanks
-Chris

Just in case others have the same question, I have determined that the CLI tools can be used to query the file services without any apparent detrimental effects while using our leopard server 10.5.3 in a workgroup configuration. Hence the names of AFP users can be determined from the command line by:
sudo serveradmin command afp:command = getConnectedUsers | grep name
and the smb users can be found with:
sudo serveradmin command smb:command = getConnectedUsers | grep name
Hope that helps
-csl

I am considering buying a new MAC laptop to run LOGIC for composition and band live/recording, but which one is best as I do not want to spend too much money? Does it have a line in and how do you monitor sound? Will I need adaptors and a interface?

Can anybody help?
I am considering buying a new MAC laptop to run LOGIC for composition and band live/recording, but which one is best as I do not want to spend too much money?
Does it have a line in and how do you monitor sound?
Will I need adaptors and an interface?
Also, I am guessing as Logic only runs on MAC surely then they would not the best spec to recommend to run it?
I see all the upgrades as additional memory or a faster process?
Is a retina screen necessary, and why flash based storage against a 1TB hard drive, and a i5 instead of an i7
The main reason for this purchase is to play live and use backing tracks and record found sounds and make creative songs.
I hope you can provide some valuable feedback, as I am a longtime MAC user and see upgrades and changes happen regularly but the most important thing is the songs not the equipment.
I have £500 already and willing to add another 500 to 700 pounds, then software extra.

Can anybody help?
I am considering buying a new MAC laptop to run LOGIC for composition and band live/recording, but which one is best as I do not want to spend too much money?
Does it have a line in and how do you monitor sound?
Will I need adaptors and an interface?
Also, I am guessing as Logic only runs on MAC surely then they would not the best spec to recommend to run it?
I see all the upgrades as additional memory or a faster process?
Is a retina screen necessary, and why flash based storage against a 1TB hard drive, and a i5 instead of an i7
The main reason for this purchase is to play live and use backing tracks and record found sounds and make creative songs.
I hope you can provide some valuable feedback, as I am a longtime MAC user and see upgrades and changes happen regularly but the most important thing is the songs not the equipment.
I have £500 already and willing to add another 500 to 700 pounds, then software extra.

I will be traveling to Rome and Paris. I'm concerned about frying my IPad when charging the battery. Will I need a converter/adapter to charge the battery or do I just need an adapter.

I will be traveling to Rome and Paris and I'm concerned about frying my iPad when charging. Will I need a converter/adapter when charging or will I just use an adapter?

what RBRY says. Look at the fine print on your power brick. It says 100v-240v. This means it can handle world wattage.....both the us 110 and the UK/and other places 220. Anything that displays that range works anywhere in the world with the right plug adapter.
You can get plug adapters at walgreens, walmart, target, kmart, best buy, office max, office depot.....almost any major retailer. Look in the travel/luggage area.
Do some googling and find out what Italian plugs look like or you can simply find a kit that is a 'world wide' kit.

How to unlock ipod not connected will not connect to itunes

how to unlock ipod not connecting to itunes

Place the iOS device in Recovery Mode and then connect to your computer and restore via iTunes. The iPod will be erased.
iOS: Wrong passcode results in red disabled screen
If recovery mode does not work try DFU mode.
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings

How many gigs will I need for a LG G3 phone?

I just purchased a G3 phone. I only signed up for 1/2 gig of data because I will only be using the phone for talking and occasional texting. I won't use the internet at all. (And won't be using any apps, email or anything.) Somebody advised me that 1/2 gig will not be enough -- that I will need 2 gigs -- even if I'm not using internet. They said that data is constantly being used, every time I use the phone. Is this true? Will I need to update to 2 gigs? Any opinions or advice on this will be greatly appreciated. Thank You.

I'm confused as to why you would upgrade to a smartphone with no intention to use the Internet features. There are many wonderful apps out there that keep you informed (most newspapers, radio stations, tv stations have apps), help you keep track of your personal finances (credit cards, bank accounts, etc), navagation apps (no need for a separate gps anymore!), share files, etc. Even fun things like Shazam, where you hear a song and you just need to know who's performing it!
1 GB should be fine for light users. I use Chrome a lot and watch some videos, plus I am always reading the newspapers online and checking twitter, instagram, etc. I have trouble connecting to Xfinity wifi hotspots with my G3, and I am not constantly around places that offer wifi.
Just make sure you have the phone set to only update apps over wifi. And restrict background data on apps as well. That should eliminate a lot of phantom/unnecessary data usage.
I use about 5GB a month. People on unlimited plans who are streaming lots of music and video and transferring files can use hundreds of GBs a month.
Have fun with your new phone! Check out Google Play and download some apps. You can always turn mobile data on and off from the settings menu as you like.

How to determine how old an iPod is

My iPod is not working correctly with my Cadillac CUE system. I'm being told the iPod is too old. How can I determine how old my iPod is?

Hello there Leah,
There is an article that talks about Identifying iPod models found here http://support.apple.com/kb/ht1353.
Usually I quote the relevant section of the article but in this case, what I would quote would be a mile long heh.
Regards,
Sterling

How to determine how long dbms_job jobs take to execute?

I have a number of dbms_Jobs (snapshot refresh jobs created automatically by creating the refresh groups) and I'm required to determine how long the jobs are running to verify some timelines. I was hoping it would be as easy as recording the last_date and next_date frequently and when there are changes, use the delta to determine (since the jobs are supposed to be scheduled from the completion of the previous job) but this doesn't appear to be working. I created a simple job that just sleeps for 15 seconds with an interval of 5 minutes, and (next_date - last_date) is always 5 minutes. What I would have expected was
Job starts at 00:00:00 (last_date)
Runs for 15 seconds, ends at 00:00:15
Scheduled out 5 minutes: 00:05:15 (next_date)
In that example next_date - last_date would be 5:15, and knowing the interval was 5 minutes I could determine it ran for 15 seconds.
In practice though the current next_date becomes the next last_date (as if the interval is being calculated when the job starts, not completes), so it always shows 5 minutes which is just the interval.
Short of not using the default jobs, and just submitting my own to do the refresh where I add some logic to record the duration, is there a good way to get this information? I'm using 10.2.0.4.
Thanks

Did you check out the TOTAL_TIME column of the DBA_JOBS view?
:p

Will I need a converter/adapter for my Macbook Pro in Japan?

I'm currently set to study abroad in Japan, and I have a few questions about what converters/adapters I'll need. Regrettably, I need to admit I'm not very tech-savvy, making this issue a bit more complicated for me.
Electricity in Japan runs at 100 volts and 50 hertz, and most (if not all) outlets only accept 2-prong plugs, according to the predeparture information I was provided with.
I should note that I lost the "plug" attachment of my Macbook's charger, meaning I have to rely exclusively on the 3-prong extension cord to plug my Macbook in. Needless to say, I should definitely get an adatper to be able to plug the 3-prong charger into Japan's 2-prong outlets.
When it comes to voltage and frequency, though, I'm essentially clueless. What converters and/or adaptors will I need to use my Macbook Pro in Japan? Are there any converters/adapters available that can address both my 3-prong plug and volts/hertz issues in a single product, or will I have to buy a separate product for each of these needs?
Thanks in advance.

You can purchase a wall outlet plug adaptor by purchasing any international travel kit such as Apple's or from AAA. No other device is needed. The power unit for your computer is auto-detecting/switching.

How to determine how many times result set columns have same value

Hi -
I'm doing a report which will be used for payment trend analyses.
My initial result set looks like this:
HOUSEHOLD_ID     JAN_PMT     FEB_PMT     MAR_PMT     APR_PMT     MAY_PMT     JUN_PMT     JUL_PMT     AUG_PMT     SEP_PMT     OCT_PMT     NOV_PMT     DEC_PMT
90026845409     1     1     1     1     2     1     1     1     1     0     1     0(many rows, of course; result set pivoted)
I need to determine the households that have a > 0 value in three or more consecutive months.
I'm hoping someone will have some suggestions because the only solutions I'm coming up with right now would be a coding nightmare (lots of "OR's"), and I'm assuming (hoping) there's a better solution out there.
Thanks!
Christine

Hi Frank,
I'm not sure I'm understanding how I would use those analytic functions. Here is my select statement:
SELECT HOUSEHOLD_ID,
       SUM(CASE WHEN ( TO_NUMBER(TO_CHAR(RECEIVED_DATE, 'MM'))     = 1 AND TO_NUMBER(TO_CHAR(RECEIVED_DATE, 'DD')) > 19 ) OR
                     ( TO_NUMBER(TO_CHAR(RECEIVED_DATE, 'MM')) - 1 = 1 AND TO_NUMBER(TO_CHAR(RECEIVED_DATE, 'DD')) < 6 )
                THEN 1 ELSE 0 END) AS JAN_PMT,
       SUM(CASE WHEN ( TO_NUMBER(TO_CHAR(RECEIVED_DATE, 'MM'))     = 2 AND TO_NUMBER(TO_CHAR(RECEIVED_DATE, 'DD')) > 19 ) OR
                     ( TO_NUMBER(TO_CHAR(RECEIVED_DATE, 'MM')) - 1 = 2 AND TO_NUMBER(TO_CHAR(RECEIVED_DATE, 'DD')) < 6 )
                THEN 1 ELSE 0 END) AS FEB_PMT,
       SUM(CASE WHEN ( TO_NUMBER(TO_CHAR(RECEIVED_DATE, 'MM'))     = 3 AND TO_NUMBER(TO_CHAR(RECEIVED_DATE, 'DD')) > 19 ) OR
                     ( TO_NUMBER(TO_CHAR(RECEIVED_DATE, 'MM')) - 1 = 3 AND TO_NUMBER(TO_CHAR(RECEIVED_DATE, 'DD')) < 6 )
                THEN 1 ELSE 0 END) AS MAR_PMT,
       SUM(CASE WHEN ( TO_NUMBER(TO_CHAR(RECEIVED_DATE, 'MM'))     = 4 AND TO_NUMBER(TO_CHAR(RECEIVED_DATE, 'DD')) > 19 ) OR
                     ( TO_NUMBER(TO_CHAR(RECEIVED_DATE, 'MM')) - 1 = 4 AND TO_NUMBER(TO_CHAR(RECEIVED_DATE, 'DD')) < 6 )
                THEN 1 ELSE 0 END) AS APR_PMT,
       SUM(CASE WHEN ( TO_NUMBER(TO_CHAR(RECEIVED_DATE, 'MM'))     = 5 AND TO_NUMBER(TO_CHAR(RECEIVED_DATE, 'DD')) > 19 ) OR
                     ( TO_NUMBER(TO_CHAR(RECEIVED_DATE, 'MM')) - 1 = 5 AND TO_NUMBER(TO_CHAR(RECEIVED_DATE, 'DD')) < 6 )
                THEN 1 ELSE 0 END) AS MAY_PMT,
       SUM(CASE WHEN ( TO_NUMBER(TO_CHAR(RECEIVED_DATE, 'MM'))     = 6 AND TO_NUMBER(TO_CHAR(RECEIVED_DATE, 'DD')) > 19 ) OR
                     ( TO_NUMBER(TO_CHAR(RECEIVED_DATE, 'MM')) - 1 = 6 AND TO_NUMBER(TO_CHAR(RECEIVED_DATE, 'DD')) < 6 )
                THEN 1 ELSE 0 END) AS JUN_PMT,
       SUM(CASE WHEN ( TO_NUMBER(TO_CHAR(RECEIVED_DATE, 'MM'))     = 7 AND TO_NUMBER(TO_CHAR(RECEIVED_DATE, 'DD')) > 19 ) OR
                     ( TO_NUMBER(TO_CHAR(RECEIVED_DATE, 'MM')) - 1 = 7 AND TO_NUMBER(TO_CHAR(RECEIVED_DATE, 'DD')) < 6 )
                THEN 1 ELSE 0 END) AS JUL_PMT,
       SUM(CASE WHEN ( TO_NUMBER(TO_CHAR(RECEIVED_DATE, 'MM'))     = 8 AND TO_NUMBER(TO_CHAR(RECEIVED_DATE, 'DD')) > 19 ) OR
                     ( TO_NUMBER(TO_CHAR(RECEIVED_DATE, 'MM')) - 1 = 8 AND TO_NUMBER(TO_CHAR(RECEIVED_DATE, 'DD')) < 6 )
                THEN 1 ELSE 0 END) AS AUG_PMT,
       SUM(CASE WHEN ( TO_NUMBER(TO_CHAR(RECEIVED_DATE, 'MM'))     = 9 AND TO_NUMBER(TO_CHAR(RECEIVED_DATE, 'DD')) > 19 ) OR
                     ( TO_NUMBER(TO_CHAR(RECEIVED_DATE, 'MM')) - 1 = 9 AND TO_NUMBER(TO_CHAR(RECEIVED_DATE, 'DD')) < 6 )
                THEN 1 ELSE 0 END) AS SEP_PMT,
       SUM(CASE WHEN ( TO_NUMBER(TO_CHAR(RECEIVED_DATE, 'MM'))     = 10 AND TO_NUMBER(TO_CHAR(RECEIVED_DATE, 'DD')) > 19 ) OR
                     ( TO_NUMBER(TO_CHAR(RECEIVED_DATE, 'MM')) - 1 = 10 AND TO_NUMBER(TO_CHAR(RECEIVED_DATE, 'DD')) < 6 )
                THEN 1 ELSE 0 END) AS OCT_PMT,
       SUM(CASE WHEN ( TO_NUMBER(TO_CHAR(RECEIVED_DATE, 'MM'))     = 11 AND TO_NUMBER(TO_CHAR(RECEIVED_DATE, 'DD')) > 19 ) OR
                     ( TO_NUMBER(TO_CHAR(RECEIVED_DATE, 'MM')) - 1 = 11 AND TO_NUMBER(TO_CHAR(RECEIVED_DATE, 'DD')) < 6 )
                THEN 1 ELSE 0 END) AS NOV_PMT,
       SUM(CASE WHEN ( TO_NUMBER(TO_CHAR(RECEIVED_DATE, 'MM'))     = 12 AND TO_NUMBER(TO_CHAR(RECEIVED_DATE, 'DD')) > 19 ) OR
                     ( TO_NUMBER(TO_CHAR(RECEIVED_DATE, 'MM')) - 1 = 12 AND TO_NUMBER(TO_CHAR(RECEIVED_DATE, 'DD')) < 6 )
                THEN 1 ELSE 0 END) AS DEC_PMT
FROM MONETARY_TRANS
WHERE MONETARY_TRANS_TYPE_ID    = 1                             --payment
--TESTING
AND HOUSEHOLD_ID = 90026845409
   AND RESPONSIBLE_PARTY_TYPE_ID = 1                             --household
   AND RECEIVED_DATE > '01-JAN-2008'
   AND ( TO_NUMBER(TO_CHAR(RECEIVED_DATE, 'DD')) < 6
    OR   TO_NUMBER(TO_CHAR(RECEIVED_DATE, 'DD')) > 19 )
   AND PREMIUM_AMOUNT            > 0
   AND BILLING_TRANS_TYPE_ID     = 6
   AND MONETARY_TRANS_TYPE_ID    = 1
   AND RESPONSIBLE_PARTY_TYPE_ID = 1
GROUP BY HOUSEHOLD_IDAnd from this I get the results originally posted. From there I need to figure out the households that have values greater than 0 for three or more consecutive months.
Thanks for your help........
-Christine

How to determine network interface that will be used to send a packet

Hello,
I'm writing to you because I encountered the following problem. My program displayes all network interfaces that are available in the system, but I would like to add a functionality in which a user can enter a destination address IP (ex. the IP address of the Google search engine) and will get information which network interface will be used to send it. As I know it is associated with reading information from routing table in the system. Maybe you know the API (functions/methods) which I could use to do it in Solaris ? I program in C/C++, but if you know how to do it in other programming languages (Java, Perl, Python) I will be grateful for any information.
Thank you for any help, tips and suggestions.
Best regards,
Foxrafi

Thank you for your response it was very helpful :).
I went to the OpenSolaris webpage because I would like to find the code of this command, but unfortunately I don't know where I should start my searches.
There is a page with source code of basic commands, but there is no "route" command: here .
Maybe you are better enlightened where I should start.
Thank you for answer.
Foxrafi

How to determine how many Sales Quote turned to Sales Order

Hello Friends,
Is there any possibility to track how many Sales Quotation has been turned into an Sales Order in the system. If not then can you please help me in making the query for it as I am not able to make it.
Thanks,
Rahul

Dear M. Jenkins,
The query which you have sent is working but I need a diffrent report.
I want that from Sales Quotation the followings fields should be displayed :
1) Document Series Name
2) Sales Quotation Document Number
3) Sales Quotation Date
4) Business Partner Code
5) Business Partner Name
6) Sales Employee Name
7) Document Total
8) Sales Quotation Status
9) Customer Refrence Number
10) Remarks
11) Territory Name
and from Sales Order
1) Sales Order Document Series Name
2) Sales Order Document Number
3) Sales Order Date
4) Business Partner Code
5) Business Partner Name
6) Sales Employee Name
7) Document Total
8) Sales Order Status
9) Customer Refrence Number
10) Remarks
11) Territory Name
and parameter should have Start Date and End Date, Territory Name, Sales Employee Name.
Means I want a report by which I get to know how many sales Quotation are turned into Order with respect to Territory Name, Sales Employee with Start and End date.
Would be thankful if you can kindly help me out in it.
I have a below query but would need an help to make it as per the above requirement.
SELECT distinct 'Sales Quotation' "Type",
D0.DocStatus,
D0.DocNum SalesQuotation#,
D0.DocDate,
D0.DocDueDate,
D0.DocTotal,
'Sales Order' "Type",
I0.DocStatus,
I0.DocNum SalesOrder#,
I0.DocDate,
I0.DocDueDate,
I0.DocTotal
FROM
((dbo.OQUT D0 inner Join dbo.QUT1 D1 on D0.DocEntry = D1.DocEntry)
left join
(dbo.ORDR I0 inner join dbo.RDR1 I1 on I0.DocEntry = I1.DocEntry)
on (I1.BaseType=23 AND D1.DocEntry = I1.BaseEntry AND D1.LineNum=I1.BaseLine))
WHERE
(D1.BaseType=-1 and D0.DocStatus = 'O' AND D1.DocDate>='[%0]' AND D1.DocDate<='[%1]')
OR (I1.BaseType=23 AND I1.BaseEntry IN
(SELECT Distinct DocEntry
FROM dbo.QUT1 WHERE D0.DocStatus = 'O' and BaseType=-1 AND DocDate>='[%0]' AND DocDate<='[%1]'))
ORDER BY D0.DocNum
Please guide and help.
Thanks,
Rahul

Sync or Stream (or, how good of an internet connection do I need)?

Hey there,
I have a really crummy satellite internet connection out here in the boonies. If I use iTunes Match and register multiple devices to my account, then when I play music, will it actually stream the song over my internet connection every single time, or do copies of the files still reside locally on my devices? If I have to stream them every single time, then I'm up a creek because my internet connection won't handle it. Yes, for real.
Thanks!

iTunes Match does not stream to iOS devices (except Apple TV). All songs played are downloaded to the device. On Apple TV all music is steam-only. In iTunes, the original files are not modified in any way so there is no streaming unless the original files are deleted.

Quick question on how CBO determines hows to access table partitions

Hey all,
I have a large table that is range partitioned on a "code" within the table (about 23 unique values). I'm able to query it very quickly and easily when I specify the code in a query... ie:
select *
from large_table
where code = 'X'
However, I am looking to calculate the code based on a reference table that I have. I can easily re-create the performance drop doing:
select *
from large_table
where code = (Select 'X' from dual)
When running the 2nd SQL, my query takes a very long time. I think I understand why (CBO can't "guess" the results of the subquery) and I understand that the easiest to fix this would be to just run the subquery first and pass its results to a second query.
My question is if anyone knows of a way to provide the CBO a hint or any other trick that would allow Oracle to scan a single partition instead of the whole table using a method like this?

Thanks Tubby, that link at least helps confirm my original reasoning for the degraded performance and appears to be for similar reasons
As for the explain plans, here they are:
(Slow Query -- Object names have been changed)
| Id | Operation | Name | Rows | Bytes |TempSpc| Cost (%CPU)| Time | Pstart| Pstop | TQ |IN-OUT| PQ Distrib |
| 0 | SELECT STATEMENT | | 413 | 219K| | 18794 (1)| 00:03:46 | | | | | |
| 1 | PX COORDINATOR | | | | | | | | | | | |
| 2 | PX SEND QC (RANDOM) | :TQ10013 | 413 | 219K| | 18794 (1)| 00:03:46 | | | Q1,13 | P->S | QC (RAND) |
|* 3 | HASH JOIN RIGHT SEMI BUFFERED | | 413 | 219K| | 18794 (1)| 00:03:46 | | | Q1,13 | PCWP | |
| 4 | BUFFER SORT | | | | | | | | | Q1,13 | PCWC | |
| 5 | PX RECEIVE | | 2 | 8 | | 15 (7)| 00:00:01 | | | Q1,13 | PCWP | |
| 6 | PX SEND HASH | :TQ10003 | 2 | 8 | | 15 (7)| 00:00:01 | | | | S->P | HASH |
| 7 | VIEW | VW_NSO_1 | 2 | 8 | | 15 (7)| 00:00:01 | | | | | |
| 8 | VIEW | view_ref_table | 2 | 26 | | 15 (7)| 00:00:01 | | | | | |
|* 9 | TABLE ACCESS FULL | ref_table | 2 | 22 | | 15 (7)| 00:00:01 | | | | | |
| 10 | PX RECEIVE | | 4543 | 2391K| | 18779 (1)| 00:03:46 | | | Q1,13 | PCWP | |
| 11 | PX SEND HASH | :TQ10012 | 4543 | 2391K| | 18779 (1)| 00:03:46 | | | Q1,12 | P->P | HASH |
|* 12 | HASH JOIN | | 4543 | 2391K| | 18779 (1)| 00:03:46 | | | Q1,12 | PCWP | |
| 13 | BUFFER SORT | | | | | | | | | Q1,12 | PCWC | |
| 14 | PX RECEIVE | | 11 | 187 | | 5 (0)| 00:00:01 | | | Q1,12 | PCWP | |
| 15 | PX SEND BROADCAST | :TQ10002 | 11 | 187 | | 5 (0)| 00:00:01 | | | | S->P | BROADCAST |
|* 16 | TABLE ACCESS FULL | threshold_table | 11 | 187 | | 5 (0)| 00:00:01 | | | | | |
|* 17 | VIEW | | 430K| 214M| | 18774 (1)| 00:03:46 | | | Q1,12 | PCWP | |
| 18 | WINDOW SORT | | 430K| 130M| 280M| 18774 (1)| 00:03:46 | | | Q1,12 | PCWP | |
| 19 | PX RECEIVE | | 430K| 130M| | 18772 (1)| 00:03:46 | | | Q1,12 | PCWP | |
| 20 | PX SEND HASH | :TQ10011 | 430K| 130M| | 18772 (1)| 00:03:46 | | | Q1,11 | P->P | HASH |
|* 21 | HASH JOIN BUFFERED | | 430K| 130M| | 18772 (1)| 00:03:46 | | | Q1,11 | PCWP | |
| 22 | BUFFER SORT | | | | | | | | | Q1,11 | PCWC | |
| 23 | PX RECEIVE | | 7332 | 157K| | 16 (13)| 00:00:01 | | | Q1,11 | PCWP | |
| 24 | PX SEND HASH | :TQ10001 | 7332 | 157K| | 16 (13)| 00:00:01 | | | | S->P | HASH |
| 25 | VIEW | view_ref_table | 7332 | 157K| | 16 (13)| 00:00:01 | | | | | |
| 26 | WINDOW SORT | | 7332 | 80652 | | 16 (13)| 00:00:01 | | | | | |
| 27 | TABLE ACCESS FULL | ref_table | 7332 | 80652 | | 14 (0)| 00:00:01 | | | | | |
| 28 | PX RECEIVE | | 129K| 36M| | 18756 (1)| 00:03:46 | | | Q1,11 | PCWP | |
| 29 | PX SEND HASH | :TQ10010 | 129K| 36M| | 18756 (1)| 00:03:46 | | | Q1,10 | P->P | HASH |
| 30 | BUFFER SORT | | 413 | 219K| | | | | | Q1,10 | PCWP | |
| 31 | NESTED LOOPS | | 129K| 36M| | 18756 (1)| 00:03:46 | | | Q1,10 | PCWP | |
| 32 | NESTED LOOPS | | 124K| 30M| | 14444 (1)| 00:02:54 | | | Q1,10 | PCWP | |
| 33 | NESTED LOOPS | | 122K| 25M| | 10173 (1)| 00:02:03 | | | Q1,10 | PCWP | |
|* 34 | HASH JOIN | | 123K| 23M| | 5893 (1)| 00:01:11 | | | Q1,10 | PCWP | |
| 35 | PX RECEIVE | | 124K| 22M| | 5629 (1)| 00:01:08 | | | Q1,10 | PCWP | |
| 36 | PX SEND HASH | :TQ10008 | 124K| 22M| | 5629 (1)| 00:01:08 | | | Q1,08 | P->P | HASH |
| 37 | BUFFER SORT | | 413 | 219K| | | | | | Q1,08 | PCWP | |
| 38 | NESTED LOOPS | | 124K| 22M| | 5629 (1)| 00:01:08 | | | Q1,08 | PCWP | |
|* 39 | HASH JOIN | | 122K| 20M| | 1797 (2)| 00:00:22 | | | Q1,08 | PCWP | |
| 40 | PX RECEIVE | | 119K| 17M| | 1101 (3)| 00:00:14 | | | Q1,08 | PCWP | |
| 41 | PX SEND HASH | :TQ10006 | 119K| 17M| | 1101 (3)| 00:00:14 | | | Q1,06 | P->P | HASH |
|* 42 | HASH JOIN | | 119K| 17M| | 1101 (3)| 00:00:14 | | | Q1,06 | PCWP | |
| 43 | BUFFER SORT | | | | | | | | | Q1,06 | PCWC | |
| 44 | PX RECEIVE | | 86 | 602 | | 3 (0)| 00:00:01 | | | Q1,06 | PCWP | |
| 45 | PX SEND BROADCAST | :TQ10000 | 86 | 602 | | 3 (0)| 00:00:01 | | | | S->P | BROADCAST |
| 46 | TABLE ACCESS FULL | OFFICE | 86 | 602 | | 3 (0)| 00:00:01 | | | | | |
|* 47 | HASH JOIN | | 119K| 16M| | 1098 (3)| 00:00:14 | | | Q1,06 | PCWP | |
| 48 | PX RECEIVE | | 47 | 940 | | 2 (0)| 00:00:01 | | | Q1,06 | PCWP | |
| 49 | PX SEND BROADCAST | :TQ10004 | 47 | 940 | | 2 (0)| 00:00:01 | | | Q1,04 | P->P | BROADCAST |
| 50 | PX BLOCK ITERATOR | | 47 | 940 | | 2 (0)| 00:00:01 | | | Q1,04 | PCWC | |
|* 51 | TABLE ACCESS FULL | REF | 47 | 940 | | 2 (0)| 00:00:01 | | | Q1,04 | PCWP | |
|* 52 | HASH JOIN | | 701K| 84M| | 1095 (3)| 00:00:14 | | | Q1,06 | PCWP | |
| 53 | PX RECEIVE | | 12 | 240 | | 2 (0)| 00:00:01 | | | Q1,06 | PCWP | |
| 54 | PX SEND BROADCAST | :TQ10005 | 12 | 240 | | 2 (0)| 00:00:01 | | | Q1,05 | P->P | BROADCAST |
| 55 | PX BLOCK ITERATOR | | 12 | 240 | | 2 (0)| 00:00:01 | | | Q1,05 | PCWC | |
|* 56 | TABLE ACCESS FULL | REF | 12 | 240 | | 2 (0)| 00:00:01 | | | Q1,05 | PCWP | |
| 57 | PX BLOCK ITERATOR | | 16M| 1617M| | 1090 (2)| 00:00:14 | 1 | 24 | Q1,06 | PCWC | |
| 58 | TABLE ACCESS FULL | Fact_Table | 16M| 1617M| | 1090 (2)| 00:00:14 | 1 | 24 | Q1,06 | PCWP | |
| 59 | PX RECEIVE | | 13M| 323M| | 693 (1)| 00:00:09 | | | Q1,08 | PCWP | |
| 60 | PX SEND HASH | :TQ10007 | 13M| 323M| | 693 (1)| 00:00:09 | | | Q1,07 | P->P | HASH |
| 61 | PX BLOCK ITERATOR | | 13M| 323M| | 693 (1)| 00:00:09 | | | Q1,07 | PCWC | |
| 62 | TABLE ACCESS FULL | Dimension 1 | 13M| 323M| | 693 (1)| 00:00:09 | | | Q1,07 | PCWP | |
| 63 | TABLE ACCESS BY INDEX ROWID | Dimesnion 2 | 1 | 12 | | 0 (0)| 00:00:01 | | | Q1,08 | PCWP | |
|* 64 | INDEX UNIQUE SCAN | Dimension 2 Index | 1 | | | 0 (0)| 00:00:01 | | | Q1,08 | PCWP | |
| 65 | PX RECEIVE | | 15M| 151M| | 261 (2)| 00:00:04 | | | Q1,10 | PCWP | |
| 66 | PX SEND HASH | :TQ10009 | 15M| 151M| | 261 (2)| 00:00:04 | | | Q1,09 | P->P | HASH |
| 67 | PX BLOCK ITERATOR | | 15M| 151M| | 261 (2)| 00:00:04 | | | Q1,09 | PCWC | |
| 68 | INDEX FAST FULL SCAN | Dimension 1 Index | 15M| 151M| | 261 (2)| 00:00:04 | | | Q1,09 | PCWP | |
| 69 | TABLE ACCESS BY INDEX ROWID | Dimension 3 | 1 | 18 | | 0 (0)| 00:00:01 | | | Q1,10 | PCWP | |
|* 70 | INDEX UNIQUE SCAN | Dimension 3 Index | 1 | | | 0 (0)| 00:00:01 | | | Q1,10 | PCWP | |
| 71 | PARTITION HASH ITERATOR | | 1 | 39 | | 0 (0)| 00:00:01 | KEY | KEY | Q1,10 | PCWP | |
| 72 | TABLE ACCESS BY LOCAL INDEX ROWID| Dimension 4 | 1 | 39 | | 0 (0)| 00:00:01 | KEY | KEY | Q1,10 | PCWP | |
|* 73 | INDEX UNIQUE SCAN | dimension 6 Index | 1 | | | 0 (0)| 00:00:01 | KEY | KEY | Q1,10 | PCWP | |
| 74 | TABLE ACCESS BY INDEX ROWID | Dimension 5 | 1 | 38 | | 0 (0)| 00:00:01 | | | Q1,10 | PCWP | |
|* 75 | INDEX UNIQUE SCAN | Dimension 5 index | 1 | | | 0 (0)| 00:00:01 | | | Q1,10 | PCWP | |
(Fast Query -- Object Names Changed)
| Id | Operation | Name | Rows | Bytes |TempSpc| Cost (%CPU)| Time | Pstart| Pstop | TQ |IN-OUT| PQ Distrib |
| 0 | SELECT STATEMENT | | 107 | 57673 | | 1302 (1)| 00:00:16 | | | | | |
| 1 | PX COORDINATOR | | | | | | | | | | | |
| 2 | PX SEND QC (RANDOM) | :TQ10009 | 107 | 57673 | | 1302 (1)| 00:00:16 | | | Q1,09 | P->S | QC (RAND) |
|* 3 | HASH JOIN BUFFERED | | 107 | 57673 | | 1302 (1)| 00:00:16 | | | Q1,09 | PCWP | |
| 4 | BUFFER SORT | | | | | | | | | Q1,09 | PCWC | |
| 5 | PX RECEIVE | | 11 | 187 | | 5 (0)| 00:00:01 | | | Q1,09 | PCWP | |
| 6 | PX SEND HASH | :TQ10002 | 11 | 187 | | 5 (0)| 00:00:01 | | | | S->P | HASH |
|* 7 | TABLE ACCESS FULL | Threshold Table | 11 | 187 | | 5 (0)| 00:00:01 | | | | | |
| 8 | PX RECEIVE | | 10163 | 5180K| | 1296 (1)| 00:00:16 | | | Q1,09 | PCWP | |
| 9 | PX SEND HASH | :TQ10008 | 10163 | 5180K| | 1296 (1)| 00:00:16 | | | Q1,08 | P->P | HASH |
|* 10 | VIEW | | 10163 | 5180K| | 1296 (1)| 00:00:16 | | | Q1,08 | PCWP | |
| 11 | WINDOW SORT | | 10163 | 3185K| 6792K| 1296 (1)| 00:00:16 | | | Q1,08 | PCWP | |
| 12 | PX RECEIVE | | 10163 | 3185K| | 1295 (1)| 00:00:16 | | | Q1,08 | PCWP | |
| 13 | PX SEND HASH | :TQ10007 | 10163 | 3185K| | 1295 (1)| 00:00:16 | | | Q1,07 | P->P | HASH |
|* 14 | HASH JOIN BUFFERED | | 10163 | 3185K| | 1295 (1)| 00:00:16 | | | Q1,07 | PCWP | |
| 15 | BUFFER SORT | | | | | | | | | Q1,07 | PCWC | |
| 16 | PX RECEIVE | | 148 | 3256 | | 15 (7)| 00:00:01 | | | Q1,07 | PCWP | |
| 17 | PX SEND HASH | :TQ10001 | 148 | 3256 | | 15 (7)| 00:00:01 | | | | S->P | HASH |
| 18 | VIEW | view_ref table | 148 | 3256 | | 15 (7)| 00:00:01 | | | | | |
| 19 | WINDOW SORT | | 148 | 2072 | | 15 (7)| 00:00:01 | | | | | |
|* 20 | TABLE ACCESS FULL | ref table | 148 | 2072 | | 14 (0)| 00:00:01 | | | | | |
| 21 | PX RECEIVE | | 6867 | 2005K| | 1279 (1)| 00:00:16 | | | Q1,07 | PCWP | |
| 22 | PX SEND HASH | :TQ10006 | 6867 | 2005K| | 1279 (1)| 00:00:16 | | | Q1,06 | P->P | HASH |
| 23 | BUFFER SORT | | 107 | 57673 | | | | | | Q1,06 | PCWP | |
| 24 | NESTED LOOPS | | 6867 | 2005K| | 1279 (1)| 00:00:16 | | | Q1,06 | PCWP | |
| 25 | NESTED LOOPS | | 6591 | 1679K| | 1050 (1)| 00:00:13 | | | Q1,06 | PCWP | |
|* 26 | HASH JOIN | | 6604 | 1567K| | 821 (1)| 00:00:10 | | | Q1,06 | PCWP | |
| 27 | BUFFER SORT | | | | | | | | | Q1,06 | PCWC | |
| 28 | PX RECEIVE | | 86 | 602 | | 3 (0)| 00:00:01 | | | Q1,06 | PCWP | |
| 29 | PX SEND HASH | :TQ10000 | 86 | 602 | | 3 (0)| 00:00:01 | | | | S->P | HASH |
| 30 | TABLE ACCESS FULL | OFFICE | 86 | 602 | | 3 (0)| 00:00:01 | | | | | |
| 31 | PX RECEIVE | | 6604 | 1522K| | 817 (1)| 00:00:10 | | | Q1,06 | PCWP | |
| 32 | PX SEND HASH | :TQ10005 | 6604 | 1522K| | 817 (1)| 00:00:10 | | | Q1,05 | P->P | HASH |
| 33 | NESTED LOOPS | | 6604 | 1522K| | 817 (1)| 00:00:10 | | | Q1,05 | PCWP | |
| 34 | NESTED LOOPS | | 6541 | 1258K| | 590 (1)| 00:00:08 | | | Q1,05 | PCWP | |
| 35 | NESTED LOOPS | | 6612 | 1207K| | 475 (1)| 00:00:06 | | | Q1,05 | PCWP | |
| 36 | NESTED LOOPS | | 6507 | 1112K| | 272 (2)| 00:00:04 | | | Q1,05 | PCWP | |
|* 37 | HASH JOIN | | 6352 | 924K| | 51 (4)| 00:00:01 | | | Q1,05 | PCWP | |
| 38 | PX RECEIVE | | 47 | 940 | | 2 (0)| 00:00:01 | | | Q1,05 | PCWP | |
| 39 | PX SEND BROADCAST | :TQ10003 | 47 | 940 | | 2 (0)| 00:00:01 | | | Q1,03 | P->P | BROADCAST |
| 40 | PX BLOCK ITERATOR | | 47 | 940 | | 2 (0)| 00:00:01 | | | Q1,03 | PCWC | |
|* 41 | TABLE ACCESS FULL | REF | 47 | 940 | | 2 (0)| 00:00:01 | | | Q1,03 | PCWP | |
|* 42 | HASH JOIN | | 37236 | 4690K| | 48 (3)| 00:00:01 | | | Q1,05 | PCWP | |
| 43 | PX RECEIVE | | 12 | 240 | | 2 (0)| 00:00:01 | | | Q1,05 | PCWP | |
| 44 | PX SEND BROADCAST | :TQ10004 | 12 | 240 | | 2 (0)| 00:00:01 | | | Q1,04 | P->P | BROADCAST |
| 45 | PX BLOCK ITERATOR | | 12 | 240 | | 2 (0)| 00:00:01 | | | Q1,04 | PCWC | |
|* 46 | TABLE ACCESS FULL | REF | 12 | 240 | | 2 (0)| 00:00:01 | | | Q1,04 | PCWP | |
| 47 | PX BLOCK ITERATOR | | 849K| 88M| | 46 (3)| 00:00:01 | KEY | KEY | Q1,05 | PCWC | |
| 48 | TABLE ACCESS FULL | Fact Table | 849K| 88M| | 46 (3)| 00:00:01 | 5 | 5 | Q1,05 | PCWP | |
| 49 | TABLE ACCESS BY INDEX ROWID | Dim 1 | 1 | 26 | | 0 (0)| 00:00:01 | | | Q1,05 | PCWP | |
|* 50 | INDEX UNIQUE SCAN | Dim 1 index | 1 | | | 0 (0)| 00:00:01 | | | Q1,05 | PCWP | |
| 51 | TABLE ACCESS BY INDEX ROWID | Dim 2 | 1 | 12 | | 0 (0)| 00:00:01 | | | Q1,05 | PCWP | |
|* 52 | INDEX UNIQUE SCAN | Dim 2 index | 1 | | | 0 (0)| 00:00:01 | | | Q1,05 | PCWP | |
|* 53 | INDEX UNIQUE SCAN | Dim 3 Index | 1 | 10 | | 0 (0)| 00:00:01 | | | Q1,05 | PCWP | |
| 54 | PARTITION HASH ITERATOR | | 1 | 39 | | 0 (0)| 00:00:01 | KEY | KEY | Q1,05 | PCWP | |
| 55 | TABLE ACCESS BY LOCAL INDEX ROWID| Dim 4 | 1 | 39 | | 0 (0)| 00:00:01 | KEY | KEY | Q1,05 | PCWP | |
|* 56 | INDEX UNIQUE SCAN | Dim 4 Index | 1 | | | 0 (0)| 00:00:01 | KEY | KEY | Q1,05 | PCWP | |
| 57 | TABLE ACCESS BY INDEX ROWID | Dim 5 | 1 | 18 | | 0 (0)| 00:00:01 | | | Q1,06 | PCWP | |
|* 58 | INDEX UNIQUE SCAN | Dim 5 Index | 1 | | | 0 (0)| 00:00:01 | | | Q1,06 | PCWP | |
| 59 | TABLE ACCESS BY INDEX ROWID | Dim 6 | 1 | 38 | | 0 (0)| 00:00:01 | | | Q1,06 | PCWP | |
|* 60 | INDEX UNIQUE SCAN | Dim 6 Index | 1 | | | 0 (0)| 00:00:01 | | | Q1,06 | PCWP | |
DB Version is 10g R2:
Oracle Database 10g Enterprise Edition Release 10.2.0.4.0 - 64bi
PL/SQL Release 10.2.0.4.0 - Production
"CORE 10.2.0.4.0 Production"
TNS for IBM/AIX RISC System/6000: Version 10.2.0.4.0 - Productio
NLSRTL Version 10.2.0.4.0 - Production

How to determine:how many connections will be needed in RFC adapter setting

Similar Messages

Maybe you are looking for