How many records will be selected by query ?

Hello experts,
what is the effect of filtered constant value (set in the filter area) on authorization? if a user is authorized for 3 values of a char, namely, abc, def and colon (, and in the query this char is restricted to a constant value which is one
of the 3 values, for example, abc, does the user get to display aggregated amounts of 3 similar records which are differentiated only by the char in question or is it that the filter will neutralise the effect of the colon such that user can only can see the record containing value abc instead of aggregated amount, assuming there are only 3 records in the cube?
many thanks.
YHogan
*I promise to award points for good answers.

Hello,
not sure that i have right understood your question.
The : authorization has the effect, if you do not include the appropriate char in the query, the query then aggregates the data over the char, the user can see the results. If you have the char in the query (for example in the filter part), you should restrict it to the authorized values (: will be not taken in account).
Commonly the system compares the structure of the query (or the generated SELECT statement) vs. the user authorization and does not compare the returned data vs. user authorizations.
Hope this helps,
Regards,
Kirill

Similar Messages

Report execute time nd how many records will be returned before hitting the "run" option?

Post Author: Prasad15
CA Forum: WebIntelligence Reporting
Is there any way to know how long the report executes and how many records will be returned before hitting the "run" option?
Regards
Prasad

To know if the report is going to return more than 10,000 records, you first have to run the query with a 'select count(1) from ... where ...' (with the same from and where clauses as you normal query). Since this takes about the same time as runnng your report, I wonder if you really gain anything (although formatting may take some time too).
You may simplify the select count(1) query by omitting all the lookup tables that are only needed for formatting. That way your query may run a lot faster. You can put this in your after parameter form trigger.

How to know how many records is returned by the query in report

Hi
i want to know how many records has been returned by a sql statement in a report.
can any one help me to solve this problem.
santosh.

you need to create a summary column with count function for a column in your select query. then u can print that formula column to know the no of rows selected in a query for a report

How many records are fetched my query into my internal tables

Hi
I am in the debugger, would like to know, how many records are fetched my query into my internal tables. How do I find out ?
thanks
siva

Hi,
Do the following,
Step 1:
Fill your internal table with select query.
Step 2 : Use DESCRIBE statement with LINE addition to get the no of rows in the internal table.
for further informations, check
http://help.sap.com/saphelp_nw70/helpdata/en/fc/eb3798358411d1829f0000e829fbfe/content.htm
Regards,
Anirban

How can I set limitations on how many records a report can return

I have a report on the web using Oracle Reports builder and I have the client enter in date parameters for the report that they want.
Well with date ranges for different clients a different number of records are returned. Because of time it can take the report to return I want to limit the number of records that report can return.
How can I go about doing that? I don't want to limit with date parameters because date won't really work for me. I need to limit on how many records can be returned. If it exceeds 10,000 records I want the client to refine the date range of schedule the report to run later. Meaning we will run that report. So I would have two check boxes if the count was over 10,000 do you want to define your date or schedule the job to run later.
Can any one help me with this? How would I go about this?

To know if the report is going to return more than 10,000 records, you first have to run the query with a 'select count(1) from ... where ...' (with the same from and where clauses as you normal query). Since this takes about the same time as runnng your report, I wonder if you really gain anything (although formatting may take some time too).
You may simplify the select count(1) query by omitting all the lookup tables that are only needed for formatting. That way your query may run a lot faster. You can put this in your after parameter form trigger.

How to filter results from 4 dynamic list menus depandant on how many of them are selected

I have a search page with a form with 4 list menus and 1 submit that post the results to the results page. I can create a record set that either retrieves the correct data from my database if a selection is made from all four menus Or i can create the recordset if only 3 menus have a selection or the same for 2 menus and 1 menu. However i want the user to be able to make a selection from either 1, 2, 3 or all 4 of the menus and the exact data be retrieved. At present if i try to combine the recordset using AND and ORs the results are not specific enough, for example the 4 menus are Location, Type, Price & Style if a user selects from all 4 i only want to retrieve data that matches all 4 criteria, but at the same time if the user selects only 2 of the menus the i want it to retrieve data that matches specifically those 2 variables. I´m not actually sure if i should be creating a more advanced sql query of if its the php side of things that i need to look at. This is my first dynamic site so please be aware i´m still a learner where php and sql is concerned. Please can anyone help?

Hey there,
Thanks for replying,
I too am using Dreamweaver recordset, my local server is XAMPP ( apache php mysql), i´have pasted my sql recordset below to give an idea of what i´m trying to do, however this does not work as i´m trying to select the exact data based on 4 menus PRICE TYPE LOCATION and BEDS, and also want the search to work if the user only selects options from either 1, 2, 3 or 4 of the menus, with the code as it is if the user select only two options from 2 of the menus the results don´t just find (for example) all results for location AND price they find all results for the location varibale OR the price variable rather than a match for both, if you see what i mean?
Any suggestions?
SELECT trueprice,`desc`, `propid`, `bathrooms`, `photo1`, locationtable.loc, typetable.style, bedtable.`number`
FROM detailstable JOIN locationtable ON detailstable.location=locationtable.locid JOIN typetable ON detailstable.type=typetable.typeid JOIN pricetable ON detailstable.price=pricetable.priceid JOIN bedtable ON detailstable.beds=bedtable.bedid
WHERE (location=varloc AND price = varprice AND type=vartype AND beds=varbed ) OR (price=varprice AND location=varloc AND type=vartype) OR (price=varprice AND location=varloc AND beds=varbed) OR (price=varprice AND beds=varbed AND type=vartype) OR ( location=varloc AND type=vartype AND beds=varbed) OR (price=varprice AND location=varloc) OR (price=varprice AND type=vartype) OR (price=varprice AND beds=varbed) OR (type=vartype AND location=varloc) OR (type=vartype AND beds=beds) OR (location=varloc AND beds=varbed) OR (price = varprice OR beds=varbed OR type=vartype OR location=varloc)
ORDER BY detailstable.trueprice ASC
Look forward to receiving your thoughts,
Linda
Date: Wed, 21 Oct 2009 14:36:33 -0600
From: [email protected]
To: [email protected]
Subject: how to filter results from 4 dynamic list menus depandant on how many of them are selected
Hiya,
I'm just doing my first dynamic site too, and am at a similar level to yourself.
Can you give us more info re the site. What software, eg Dreamweaver etc are you using, and is your server using PHP or ASP etc?
For what I've used, I amended the SQL side of things in the recordset in Dreamweaver. That way, you can test the SQL as you're setting up the recordset.
Let me know how you're going on anyway
Cheers
Andy
>

How do we track how many records INSERT/UPDATE/DELETE per day

Hi All,
We have around 150 tables in database. so many members/persons can access these table and every one can have rights to do INSERT,DELETE,UPDATE the records. I wanted to know How many records are UPDATED,INSERTED,DELETED for a day. is it possible to find out.
I have some questions please clarify the doubts.
1> If we create any table, this table gets store in All_OBJECTS/USER_OBJECTS, tabs/tab/user_tables...... we can find out table name,columns what tables were created in database.
2> if we enter records/ delete records / update records in a table. we can able to find corresponding table. Apart from corresponding table . is there any way to find out records.
above i said that if i create any table it will store in objects table.

Schedule a periodic DBMS_STATS.FLUSH_DATABASE_MONITORING_INFO and query USER_TAB_MODIFICATIONS. This view shows DML activity against each table and is updated when database monitoring info is flushed. The flush is automatic but if you need control over the frequency of updates, you can explicitly call the FLUSH.
In 9i you have to "ALTER TABLE table_name MONITORING ;" before you can use this method.
In 10g, this is enabled by default unless STATISTICS_LEVEL is set to BASIC.
See http://download.oracle.com/docs/cd/B19306_01/server.102/b14237/statviews_4465.htm#sthref2375
and
http://download.oracle.com/docs/cd/B19306_01/server.102/b14231/tables.htm#ADMIN01508
Another useful view is V$SEGMENT_STATISTICS (or the faster view V$SEGSTAT) which provides information in the same manner as in the V$SYSTAT / V$SESSTAT views.
Hemant K Chitale
http://hemantoracledba.blogspot.com

How many records does JDBC adapter can obtain in one polling?

Hello everybody,
I need to do an interface between legacy system and SAP ECC, the legacy systems have a DB so i use the jdbc adapter (sender) and receive the information to SAP ECC with proxy, so i need to activate the polling option from my jdbc adapter working as a sender, i read a table with lot of records, and i need to know how many records does jdbc adapter support when the polling is executed, because is necessary read all records from the table and change the status of the processed field.
Is possible to get all the records from that table in one polling interval (50,000 records aprox)?, or i need to do the polling by blocks of records until finish all records from the table?, the second option, i dont have idea how can i do it.
Regards,
Vicman

Hi again!,
i still working on that, but i have a question, is possible to handle Store Procedure in jdbc adapter?? is supported?, like PL SQL, because i was working in the next query but i don't know if it works and where do i need to locate the query in the Query SQL Statement or in Update SQL Statement field or both? but how?.
DECLARE c_cursor CURSOR FOR
SELECT * FROM tablename
WHERE processed=0
OPEN c_cursor
   FETCH NEXT FROM c_cursor
WHILE @@FETCH_STATUS = 0
BEGIN
   update tablename set processed=1
   FETCH NEXT FROM c_cursor
END
CLOSE c_cursor
DEALLOCATE c_cursor
Regards,

How many records processed

Dear all,
Oracle 10g
Is it possible to find out that how many records have been processed till now by an sql statement. The sql statement takes some hours to get the results. Can we know after some time how many records have been processed till now.
Regards
SL

It is not necessary that the job be present in V$SESSION_LONGOPS.
A long running DML that is driven by a Nested Loop - IndexRangeScan will NOT appear in V$SESSION_LONGOPS.
A long running Query that isn't doing FullTableScan(s) , Sort-Merge Join etc will NOT appear in V$SESSION_LONGOPS.
Only some classes of operations appear in V$SESSION_LONGOPS.

Is there any limit on how many records a cursor can hold?

Hi Everyone,
This is Amit here. I want to know whether there is any limit on how many records a cursor can hold.
I have a program in which i am creating a cursor and passing it to another procedure as an input parameter. But the count of cursor query is more than 15 Lakhs. The program is running forever.
Just wanted to know whether the huge data is the problem.
Thanks ....
Regards,
Amit

user13079404 wrote:
Just wanted to know whether the huge data is the problem.What do you think? How long does your code typically need to wait for the data to leave the magnetic platter of the harddisk, travel across wires and into the memory buffer of your application - for a single row?
Now multiply that waiting for I/O time with a million - for a million rows. Or by a billion, for a billion rows.
Is "+huge data+" a problem? Not really - it simple needs more work to get that amount of data from disk. More work means slower performance. It is that simple.
Which is why the row-by-row approach used by many developers is wrong. You do not pull a million rows from disk and process it in PL/SQL or Java or .Net. Heck, you do not even pull 10,000 rows like that.
The correct approach is to think data sets and use SQL to process that for you - and only return the bare minimum of data to the application layer. Maximize SQL. Minimize PL/SQL and Java and .Net.

How to keep track of how many records to display in a page.

Hi All:
I am using Weblogic 9.2, Web Services Client, and Struts.
I have a java client in struts that calls a web services.
The "ID" field contains a Java integer.
The "First_Name" is a Java String.
The "Effective_Date" field is a Java date field.
The web service returns an arrayList of a class called Result.
Code for Result.java:
>
public class Result
int id;
String first_Name;
Date effective_Date;
public int getId
return id;
public void setId(int id)
this.id=id;
public String getFirst_Name()
return first_Name;
public void setFirst_Name(String first_Name)
this.first_Name = first_Name;
public Date getEffective_Date()
return effective_Date;
public void setEffective_Date(Date effective_Date)
this.effective_Date=effective_Date;
From the arrayList, I displayed the result as the following:
ID FIRST_NAME EFFECTIVE_DATE
3 John 9/10/2007
2 Andrew 1/11/2006
5 Peter 3/4/2006
The "ID" header is a link.
The "First Name" header is a link.
The "EFFECTIVE_Date" is a link.
If I clicked on the link "ID", the first time, it will sort the rows in ascending
order like the following:
ID FIRST_NAME EFFECTIVE_DATE
2 Andrew 1/11/2006
3 John 9/10/2007
5 Peter 3/4/2006
If I clicked on the link "ID", the second time, it will sort the rows in descending
order like the following:
ID FIRST_NAME EFFECTIVE_DATE
5 Peter 3/4/2006
3 John 9/10/2007
2 Andrew 1/11/2006
If I clicked on the "First_Name" field the first time, it will sort the rows in
desceding order.
If I clicked on the "First_Name" field the second time, it will sort the rows in
ascending order.
This applies the same for the "EFFECTIVE_DATE".
If the arrayList returns 80 records of class Results.java.
I needed to displayed only the first 50 records for the first page and 30 records for the second page.
How do I keep track of that so that when I am in the second page, I know to display only record 51 to 80?
If I have a arrayList that returns 120 records of class Results.java.
In the first page, it displayed only 50 records.
In the second page, it displayed only 50 records.
In the third page, it displayed only 20 records.
Assuming I am able to sort the rows by ID, FirstName and Effective_Date by using Results.java implementing the
Java Comparator class. Is it still possible to keep track of how many records displayed in the first page and how many records should
be dispalyed in the second page?
Any hint would be greatly appreciate.
Yours,
Frustrated.

Hi,
Access the table through SM30. It comes blank as standard. Click "New Entries" and make entries for changes to be tracked. For example, whenever an org. unit changes 002 and 003 relationship, you will make entries like:
01 O 1001 B002 Activate box checked
01 O 1001 B003 Activate box checked
Here, 01 is your active plan version, O is org. unit, 1001 is infotype and B002 and B003 are the subtypes. You can also use * for infotype and subtype which means every change will be logged.
If you then run the report RHCDOC_DISPLAY through SA38, it will pick up all the changes pertaining to B002 and B003 relationship for org. units (in the above example).
Similarly, you can set up this table for other object types.
For more information, follow SPRO>Personnel Management>OM>Basic Settings>Activate change documents and go through the documentation for that node. Also, read up the documentation for the report.
Hope this helps.
Donnie

How many items will overflow in FI-SL Deltaqueue?

Hi,experts:
    As to SAP note
   "If the Delta method has been initialized for a source system, a Delta upload must be scheduled regularly so that the Deltaqueue will not overflow. If you want to stop the Delta method, you should also delete initialization."
    Then I have a question that how many items will overflow or how to calculate the maximum records?
Best Regards
Martin Xie

Hi,
In case of FI-SL the delta queue is not used so its not possible to count the number of records.
an SAP program-internal limit ensures that no more than 1 million LUWs are ever read and fetched from the database per delta request.
But even the LUW's can be a one document or many documnets bundled together.
So its defentely a multiple of million but its defenately not possible to count the number of records but you can make an assumption based on memory.
Thanks
Ajeet

I need to know how many objects i got selected

Hi all,
I need to know how many objects i got selected for a particular issue and ussualy are too many to count one by one. I know that this information is provided in other software like Corel or Freehand, but I didn't find out how to get this info in Illustrator.
Any idea?
Thanks

Open the Document Info palette.
From its flyout menu, turn on Selection Only and Objects.
The palette will not remember those settings. You have to re-select them every time you relaunch Illustrator.
The Document Info palette is a half-baked hack, tagged-on to display a subset of the information in the normally-hidden programmer's window, instead of incorporating the data properly into the program's interface. So it's another completely unintuitive grab-bag of important information that everyone needs, but no one would expect to look for there.
JET

Can any body tell me how many records can a db hold in a minute

can any body tell me how many records can a db hold in a minute

user644700 wrote:
can any body tell me how many records can a db hold in a minuteI would hope not since it will depend on X number of factors where X is a very large number.
Did you have anything specific in mind (version, hardware, etc...)? I assume you mean load and not hold?

No of records in SAP BI Corresponds to how many records in database

Dear all
If i have 2lakh records in a datasource then how it Corresponds to how many records in database.

For the first time load the datasource , the no of records in the database(source) must be equal to the number of records in the PSA(datasource).
If you are daily deleting the records in the PSA , and doing a delta load then the no of records in PSA must be equal to the no of records in delta queue RSA7 for the corresponding datasource .
If the load is a full load everytime or a full repair ,then the no of records in PSA must be equal to the numbers of records in source.

How many records will be selected by query ?

Similar Messages

Maybe you are looking for