How move Oracle Certificate Authority on other server

Hello!!!
I am planning move Oracle Certificate Authority
to another host with certificates and so on.
Can you help me, I cannot find any documentation.

Hi,
You can start with some value say 40% of your physical memory allocate to SGA (SGA_TARGET) and see your database performance. Then monitor the use of SGA and then can decide on the add or reduce it. There is no direct rule for sizing it purely depends on your application behavior and amount of data and many other factors.
This will be continuous process, you need to start with some reasonable value.
Cheers,
Dilipkumar Patel.

Similar Messages

  • SSL certificates and/ or Oracle Certificate Authority

    Our Oracle infrastructure is as follows:
    1.Database server
    (a)Oracle 9i R2 database
    (b) Oracle ApEx 2.2
    2. Infrastructure server
    (a) Oracle 10g (9.0.4.x.x) Infrastructure
    (b) OID - configured as external authentication to Microsoft 2003 Active Directory LDAP version 3
    (c) SSO - configured as Windows Native authentication
    3. Application server
    (a)Oracle 10g (9.0.4.x.x) Forms and reports server
    Network traffic currently is not encrypted. All we need is to ensure that network traffic is encrypted between the the end-user PC and all servers (database or app server)
    I was reading through Oracle Certificate Authority and Secure Sockets Layer.
    1. Is there a difference between the two products?
    2. Which product would be best to ensure the encryption (authentication is provided through MS LDAP)
    Thanks,
    Mayura

    Certificate authority and SSL are two completely different concepts. They can be related but are by no means similar.
    SSL is a service or a feature, not a product. SSL is used to encrypt the traffic. Part of SSL is the use of certificates for authentication. A server or user would pass a certificate as part of an SSL transmission.
    The certificates used for enrypted transmission(SSL), can be obtained from the Oracle Certificate Authority(OCA), or by a third party certificate authority. OCA is not required to use SSL.
    To achieve a fully encrypted envrinment, you would need to use SSL at several layers. This would be done with or without the use of the Oracle certificate authority.
    1. From the web browser to the middle tier
    2. End user to database
    3. from the middle tier to OID
    4. from the middle tier to the database
    5. From OID to active directory

  • Oracle Certificate Authority OCA and SSL Immlementation

    Hi
    Is anybody can clear that:
    1) Does OCA only work on intranet or it does work internet also.
    2) What is the difference between OCA and Verisign or any other third party CA
    3) What are the benifits for OCA
    4) What are the advantages and disadvantages for both of them
    5) what are the main steps invloved to implement OCA and SSL
    I'll be very appraciated, if anybody give me the answers as soon as possible. Please gIve me the answers whichever you knows very well.
    Thanks in Advance
    Munir Muhammad

    Certificate authority and SSL are two completely different concepts. They can be related but are by no means similar.
    SSL is a service or a feature, not a product. SSL is used to encrypt the traffic. Part of SSL is the use of certificates for authentication. A server or user would pass a certificate as part of an SSL transmission.
    The certificates used for enrypted transmission(SSL), can be obtained from the Oracle Certificate Authority(OCA), or by a third party certificate authority. OCA is not required to use SSL.
    To achieve a fully encrypted envrinment, you would need to use SSL at several layers. This would be done with or without the use of the Oracle certificate authority.
    1. From the web browser to the middle tier
    2. End user to database
    3. from the middle tier to OID
    4. from the middle tier to the database
    5. From OID to active directory

  • Common reason for Mirage Server Failure in Clustered Environment and how clients will be switched to other server in a cluster

    Hi,
    Can Anybody share me the information regarding Common reason for Mirage Server Failure in Clustered Environment.
    And how clients will be switched to other server in a cluster to continue their operations from the failed server.
    Regards,
    Bathesha C

    Hello,
    if you have more than one mirage server configured with Load balancing (LB or MSFTNLB) the client would disconnect from the faulting server and then reconnect to an other server to progress with the action as before.
    All Mirage server are stateless and share the same SIS (single instance store) so any server can update or create CVD file set for an client.
    Hope that helps.

  • How can move Grid Control Repository to other server

    hi,
    We need to move our Oracle Grid Control Repository to Other server due to some Server Issuse....can someone helpme out......
    OMR and OMA : Server A (Windows 2003 Server)
    OMS : Server B (Windows 2003 Server)
    Target Server : Server C (Windows 2003 Server)
    Movement : Server A -----> Server C
    Please help me someone.....
    Thanks
    Jay

    Please Refer the below doc for migration
    http://download.oracle.com/docs/cd/B16240_01/doc/em.102/e10954/repository.htm#CHDBHDDC

  • Windows Server 2008 R2 Standard "Certificate Authority Service" / Exchange Server 2010 EMC not starting and no AD connectivity for authentication.

    Hello,
    I am a new IT Manager at this company and need assistance big time. Their environment looks as follows:
    Server 1. Domain Controller Server (Windows Server 2008 R2 Standard) running active directory.
    Server 2. Email Server (Windows Server 2008 R2 Standard) running Exchange Server 2010 .
    * Note. No back ups to work with aside from whats mentioned below.
    DC had a virus infection causing a lot of issues on the shared network drives 2 days ago locking up all the files with a crypto ransom virus. Running Avast suppressed the infection. Had to recover the file shares which luckily had a back up. 
    The issue is that the Exchange Server 2 post this lost connectivity with the AD Server 1. Exchange Server 2 when launching EMC could not launch the console stating the following:
    "No Exchange servers are available in any Active Directory sites. You can’t connect to remote
    Powershell on a computer that only has the Management Tools role installed."
    Shortly after I found that it is possible the EMC launcher was corrupt and needed to be reinstalled following another blog post. I deleted the exchange management console.msc  per instructions only to discover I couldnt relaunch it because there was
    no way how. So I copied another msc file that happened to be on the DC Server 1  back to Exchange Server 2 and got it to launch again. 
    Another post said that it might be an issue with the Domain Account for the Computer, so to delete it in the AD Server 1 only to find that rejoining it from Exchange Server 2 using Computer>Properties> Chage Settings > Change is greyed out because
    it is using the Certificate Authority Service.
    I tried manually re-adding the computer in AD and modeling permissions after another server in group settings but no go. After this I was unable to login to the Exchange Server 2 with domain accounts but only local admin, receiving the following Alert:
    "The Trust Relationship between this workstation and primary domain failed."
    I tried running the Power Shell tools on Exchange Server 2 to rejoing and to reset passwords for domain accounts as noted in some other blogs but no luck as the Server 2 could not make the connection with Server1 or other errors it kept spitting out.
    I also during the investigation found the DNS settings were all altered on both the Server 1 and Server 2 which I luckily was able to change back to original because of inventorying it in the beginning when I started. 
    I need help figuring out if I need to rejoin the Exchange Server 2 manually by disabling the Certificate Authority Service (or removing the CA as listed here:
    https://social.technet.microsoft.com/Forums/exchange/en-US/fb23deab-0a12-410d-946c-517d5aea7fae/windows-server-2008-r2-with-certificate-authority-service-to-rejoin-domain?forum=winserversecurity
    and getting exchange server to launch again. (Mind you I am relatively fresh to server managing) Please help E-Mail has been down for a whole day now!
    Marty

    I recommend that you open a ticket with Microsoft Support before you break things more.
    Ed Crowley MVP "There are seldom good technological solutions to behavioral problems."

  • How to create certificate authority and configure it for IIS

    Hi
    I Install ADCS role in Server 2012 and configure it. but when i go to IIS and want to create domain certification , the select button is grey .i think i couldn't configure certificate authority correctly. how can fix this problem.
    Whenever you see a helpful reply, click on Vote As Helpful & click on
    Mark As Answer if a post answers your question.
    LinkedIn:
      Facebook:

    Thanks my problem was solved.
    But there is a problem after install IIS and ADCS , i restarted both server but didn't work ,but now(6 hours after restart) it work fine.
    another Question is after i select appropriate certificate authority ,when i click on finish it gives me the following error 
    "the certificate request was submitted to the online authority but was not issued the request was denied"
    Whenever you see a helpful reply, click on Vote As Helpful & click on
    Mark As Answer if a post answers your question.
    LinkedIn:
    Facebook:

  • Migrate Server 2008 Certificate Authority To New Server Different Host Name?

    Our internal CA is installed on one of our Exchange servers.  Exchange is being migrated from 2010 to 2013, so all current Exchange servers will decommissioned and replaced with new new Hyper-V VMs with either Server 2008 R2 or 2012 R2 OS. The old VM
    containing Exchange 2010 and the current CA will go away since we cannot afford to use the server resources and use up the required Windows license to keep that server running doing nothing but acting as a CA.
    So, we will either need to move the CA to the new replacement Exchange 2013 server or some other existing server that's being used for something else (maybe one of the domain controllers).
    What is the best way to handle this?  I don't think the migration from Exchange 2010 to 2013 allows for reusing the same host name on the replacement server and if we move the CA to another existing server, it will also be on a server with a new host
    name anyways.
    Can we migrate the CA to a new server with a different host name?
    What about reissuing all the active certificates from the current server to replace them with new certificates from the new server and then decommissioning the original CA?  Can this be automated in some way?
    Which way is best and how would it be done?

    When following the instructions in the guide, I would also consider to switch to new "sanitized" URLs in certificates (CDP and AIA) in case you had used the default URLs now. That's what I did this when migrating W2K3 CAs (with default URLs) to W2K8 R2.
    Per default, the LDAP and HTTP URLs point to the CA server itself (HTTP) or to an LDAP objects that has the same name as the current server.
    Migrating to a new server, you need to make sure that CRLs will still be published to the old locations - thus the new CA server would write to the LDAP object that corresponded to the old server, and HTTP might be fixed by redirecting the DNS record. (Make
    sure this is documented so that nobody thinks it might be a good idea to delete the old object as it "references a server that does not exist anymore".)
    As you have to fiddle with URLs anyway, I would then add new URLs having neutral names - that is URLs not including the name of the CA server. The new CA instance would then 1) publish to the old locations but not add these to certificates anymore and 2)
    publish to new sanitized locations and add them to CDP and AIA URLs.
    Elke

  • How to accept certificate authority in HP PPM

    How can we accept the Certificate Authority (similar to VeriSign) of any organization specific instead of just accepting the individual certificate in HP PPM.This enables to be  able to accept any cert from that organization specific instead of having to import the Certificate each year

    Hi FahadKhan,
    Welcome to the HP Forums, I hope you enjoy your experience! To help you get the most out of the HP Forums I would like to direct your attention to the HP Forums Guide First Time Here? Learn How to Post and More.
    I am sorry, but to get your issue more exposure, I would suggest posting it in the commercial forums, since this is a commercial product. You can do this at
    http://h30499.www3.hp.com/t5/Operations-Management/ct-p/operations-management
    I hope this helps!
    Regards
    MechPilot
    I work on behalf of HP
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos, Thumbs Up" on the right to say “Thanks” for helping!

  • Move out Info Provider to other server without transport connection?

    Hi All,
    Could you share you thought ?
    Is there a possibility to move out the info provider design & info object to other server without transport connection ?
    The background is our project box will be decommissioned, and unfortunately it's not connected to development box. We've already found how to move out ABAP program, we generate it to XML, than upload it.
    How about for info provider itself / info Object ? Is there a possibility to have the same treatment ?
    Any thought from all of you ?
    If you have the way, appreciate if you can share it to me.
    Thanks a lot and have a good day,
    Best regards,
    Daniel N.

    Hi,
    From transport side, it is possible. You can create a dummy transport target system, then collect BI objects in request and release it. After release, the exported data is in dir_trans, you can manually copy it to realy target server, put them in dir_trans, and in STMS import Q, select from menu of import external request and import it.

  • How to restore cold backups on other server

    Hi all
    On Oracle9i production server, we have windows scheduled job to take the cold backups every day night. The size of the database is 2GB.
    Now, the cold backup consists of
    - Database files & Log files
    - Parameter file
    - Control file.
    I am required to check the validity of the cold backup we have. So, I need to restore the database in another server.
    So, please provide me the steps I need to do to restore the database.
    Thanks.

    See Chapter 3 "Performing User-Managed Restore Operations" of the
    "Oracle9i User-Managed Backup and Recovery Guide Release 2 (9.2)" (Part Number A96572-01)
    http://download.oracle.com/docs/cd/B10501_01/server.920/a96572/osrestore.htm#26029
    Best to start with Chapter 1 "Introduction ..."
    http://download.oracle.com/docs/cd/B10501_01/server.920/a96572/intro.htm#431510
    and Chapter 2 "Making User-Managed Backups"
    http://download.oracle.com/docs/cd/B10501_01/server.920/a96572/osbackups.htm#10000
    If you are on Windows note that besides installing the sofwtare you must also create the Oracle Service before you restore a database backp to another server.
    See Chapter 6 "Backing Up and Recovering Database Files" in the Oracle Database Administrator's Guide for Windows
    http://download.oracle.com/docs/cd/B10501_01/win.920/a95491/backup.htm#1004903

  • How to download a file from other server using servlet

    Hi All....
    Good Morning....
    right now,i am facing a problem..i am trying to download a file which is in other server..i tried somany ways and i couldnt succeed in this...
    will u pls give me solution for this..
    because it is very urgent for me...
    i am very much thankful if u provide me the code samples also....
    i am seeking ur help...
    Regards,
    sathya

    right now,i am facing a problem..i am trying to download a file which is in other server..i tried somany ways and i couldnt succeed in this...If you can tell some of our approaches and the failures you faced, someone might be able to help you.
    I dont think anyone will just give the code samples.

  • OCA oracle Certificate Authority

    Hi there
    When I try to start ocactl than I am getting error, which is:
    $./ocactl start
    Error: OCA Service not started. Web server down
    Please let me know the solution as soon as possible.
    Thanks
    Munir

    $./ocactl start
    Error: OCA Service not started. Web server downMunir, have you checked if your oracle http server(ohs) is up?
    $ORACLE_HOME/opmn/bin/opmnctl status -l
    $ORACLE_HOME/opmn/bin/opmnctl startproc type=ohs

  • How move music & vid to my other computer?

    scenario: at MacWorld Expo i bought an iPod video; using my 15" AlPB i bought several tv shows from the ITMS and enjoyed watching them on the flight home. Now I want to consolidate that newly purchased video and a couple songs i bought on the PB, on my "main" computer, my desktop.
    When I hooked the iPod vid up to the PB it downloaded onto the iPod the vids and about 400 songs that were on that computer; i've got about 1600 songs (mostly but not entirely duplicates of the 400) on the desktop 'puter. When I hooked the iPod up at home those 1600 songs replaced what WAS on the iPod.
    How do i "merge" the two computers' songs and vids (there's a music vid already on the desktop computer, too) so that everything is on the desktop computer, and for ease of use, it's all in the same place on the PB, too?
    thanks
    terry

    ok, i consolidated each library on its respective
    computer. I then used target mode to mount the
    powerbook on the desktop of the G5. I copied the
    iTunes Music folder from the G5 to the powerbook.
    That was incorrect. You should have:
    1) Copied the files you want to add to any arbitrary folder on the destination machine.
    2) file->addfolder_tolibrary, choosing the arbitrary folder.
    3) Consolidate library, which will copy all files from your arbitrary folder to the default iTunes library folder.
    4) Delete the arbitrary folder, since the files are now copied to the default iTunes library folder.
    That's it. There's no way I know of to also merge all your ratings etc. if the new songs came from another pc... unless you hack and merge the 'iTunes Music Library.xml' file by hand.

  • How to make development DB from other server.

    Hi.
    I need to create a Development Database on a new server being copied from productive database. The servers are identicall, running Win2003 SP2 and Ora 10.2.0.1.0.
    **exists some tool to do it easy?
    **I can do it without stopping the productive server?

    Hi,
    You can duplicate your database using rman, or just clone your database and rename it.
    USe the following Metalink notes to help you:
    - Creating a Duplicate Database on a New Host. - Doc ID: NOTE:388431.1
    - Steps to Manually Clone a Database - Doc ID: NOTE:458450.1
    Cheers,
    Francisco Munoz Alvarez
    http://www.oraclenz.com
    Edited by: F. Munoz Alvarez on Sep 25, 2008 11:01 AM

Maybe you are looking for