How openning of adobe forms could be faster at Enterprise portal 7.0
I wander how openning of adobe forms could be faster at Enterprise portal 7.0. We are using for ESS/MSS functionality.
I found out that firs time an form is opened it takes longer than next times. Has anyone some good documentation
Than you in advance
> I wander how openning of adobe forms could be faster at Enterprise portal 7.0. We are using for ESS/MSS functionality.
> I found out that firs time an form is opened it takes longer than next times. Has anyone some good documentation
I would say that this is caused by the Adobe Reader on the PC, not by the portal itself.
Markus
Similar Messages
-
How can I hide the option to "Open in Adobe Forms Central" in embedded responses.
Hello All,
I created a Web based form and the responses received through same are available in an web page (through embed code). Now I wish to limit the ability of those viewing same to export the data in XLS format. For this one thing I need to somehow enable is to remove the "Open in Adobe Forms Central" as the export to XLS option is only available there.
Looking forward to your responses....... if anything,
this could have appeared after I did the EFI frimware update.
So, is it standart to see the "choose network" option (below the bootable volumes)
in te start up manager (option-boot) ?
cheers,
pascal -
Error while opening the ADOBE FORM via mail
Hi to all,
I have created a program to attached ADOBE FORM to mail.
When I execute the program, it sends ADOBE FORM to my mail ID successfully.
But when I open my mail and try to open attached ADOBE FORM, it gives error
ADOBE READER COULD NOT OPEN u2018PDF FORM (1). PDFu2019 because it is either not a supported file type or because the file has been damaged ( for example, it was sent as an email attached and wasnu2019t correctly decoded).
Please can any tell me, what the problem is and what the solution is for that?
I shall be thankful to you for this.
Regards
Pavneet Rana
Edited by: pavneet rana on Aug 1, 2011 2:22 PMThanks for reply,
below is the code.
data:
l_fm_name TYPE rs38l_fnam,
l_formname TYPE fpname VALUE 'ZTESTF1' ,
fp_docparams TYPE sfpdocparams,
FP_FORMOUTPUT TYPE FPFORMOUTPUT,
fp_outputparams TYPE sfpoutputparams.
data: I_ATT_CONTENT_HEX type SOLIX_TAB.
START-OF-SELECTION.
data: st TYPE ZTABFM11.
data: it type table of sflight.
data: wa like LINE OF it.
data: wa_st like LINE OF ST.
fp_docparams-langu = 'E'.
fp_docparams-country = 'US'.
fp_docparams-fillable = 'X'.
fp_outputparams-nodialog = 'X'.
fp_outputparams-preview = 'X'.
fp_outputparams-device = 'LP01'.
fp_outputparams-getpdf = 'X' .
fp_outputparams-dest = 'LP01'.
fp_outputparams-reqimm = 'X'.
fp_outputparams-reqdel = 'X' .
fp_outputparams-xfpoutdev = 'LP01'.
CALL FUNCTION 'FP_FUNCTION_MODULE_NAME'
EXPORTING
i_name = l_formname
IMPORTING
e_funcname = l_fm_name.
E_INTERFACE_TYPE =
CALL FUNCTION 'FP_JOB_OPEN'
CHANGING
ie_outputparams = fp_outputparams
EXCEPTIONS
cancel = 1
usage_error = 2
system_error = 3
internal_error = 4
OTHERS = 5.
select * from sflight into TABLE it.
loop at it into wa.
wa_st-CARRID = wa-CARRID.
wa_st-CONNID = wa-CONNID.
wa_st-FLDATE = wa-FLDATE .
wa_st-PLANETYPE = wa-PLANETYPE.
append wa_st to st.
endloop.
CALL FUNCTION l_fm_name
EXPORTING
/1bcdwb/docparams = fp_docparams
st = st
IMPORTING
/1BCDWB/FORMOUTPUT = FP_FORMOUTPUT
EXCEPTIONS
usage_error = 1
system_error = 2
internal_error = 3
OTHERS = 4
CALL FUNCTION 'FP_JOB_CLOSE'
IMPORTING
E_RESULT = result
EXCEPTIONS
usage_error = 1
system_error = 2
internal_error = 3
OTHERS = 4
CALL FUNCTION 'SCMS_XSTRING_TO_BINARY'
EXPORTING
BUFFER = FP_FORMOUTPUT-PDF
APPEND_TO_TABLE = ' '
IMPORTING
OUTPUT_LENGTH =
TABLES
BINARY_TAB = I_ATT_CONTENT_HEX .
CLASS cl_bcs DEFINITION LOAD.
DATA:
lo_send_request TYPE REF TO cl_bcs VALUE IS INITIAL.
lo_send_request = cl_bcs=>create_persistent( ).
Message body and subject
DATA:
lt_message_body TYPE bcsy_text VALUE IS INITIAL,
lo_document TYPE REF TO cl_document_bcs VALUE IS INITIAL.
APPEND 'Dear,' TO lt_message_body.
append ' ' to lt_message_body.
APPEND 'Fill the details.'
TO lt_message_body.
append ' ' to lt_message_body.
APPEND 'Thank You,' TO lt_message_body.
lo_document = cl_document_bcs=>create_document(
i_type = 'RAW'
i_text = lt_message_body
i_subject = 'flight details' ).
DATA: lx_document_bcs TYPE REF TO cx_document_bcs VALUE IS INITIAL.
TRY.
lo_document->add_attachment(
EXPORTING
i_attachment_type = 'PDF'
i_attachment_subject = 'flight details'
I_ATTACHMENT_SIZE =
I_ATTACHMENT_LANGUAGE = SPACE
I_ATT_CONTENT_TEXT =
I_ATTACHMENT_HEADER =
I_ATT_CONTENT_HEX = I_ATT_CONTENT_HEX ).
CATCH cx_document_bcs INTO lx_document_bcs.
ENDTRY.
Add attachment
Pass the document to send request
lo_send_request->set_document( lo_document ).
Create sender
DATA:
lo_sender TYPE REF TO if_sender_bcs VALUE IS INITIAL,
l_send type ADR6-SMTP_ADDR value 'mail id '.
lo_sender = cl_cam_address_bcs=>create_internet_address( l_send ).
lo_sender = cl_sapuser_bcs=>create( sy-uname ).
Set sender
lo_send_request->set_sender(
EXPORTING
i_sender = lo_sender ).
Create recipient
DATA:
lo_recipient TYPE REF TO if_recipient_bcs VALUE IS INITIAL.
lo_recipient = cl_sapuser_bcs=>create( sy-uname ).
lo_recipient = cl_cam_address_bcs=>create_internet_address( l_send ).
Set recipient
lo_send_request->add_recipient(
EXPORTING
i_recipient = lo_recipient
i_express = 'X' ).
lo_send_request->add_recipient(
EXPORTING
i_recipient = lo_recipient
i_express = 'X' ).
Send email
DATA: lv_sent_to_all(1) TYPE c VALUE IS INITIAL.
lo_send_request->send(
EXPORTING
i_with_error_screen = 'X'
RECEIVING
result = lv_sent_to_all ).
COMMIT WORK.
message 'Form sucessfuly send to person' type 'I'.
plesase can any one, provide the soultion.
i shall be thankful toy you for this.
regards
pavneet rana -
Error in opening the adobe form to create a PCR
Hi,
I m getting an error while i open the adobe form to create a PCR as follows.
Script failed. accessor '$record.ENAME.DATA.FIELD' is unknown.
Please help.
<b>Points are sure.</b>Hi,
I m getting an error while i open the adobe form to create a PCR as follows.
Script failed. accessor '$record.ENAME.DATA.FIELD' is unknown.
Please help.
<b>Points are sure.</b> -
Hi Experts.
Kinldy tell me how to install adobe forms ...Hi
Just follow these links.
https://www.sdn.sap.com/irj/sdn/adobe
http://help.sap.com/saphelp_nw70/helpdata/EN/c8/4adf7ba13c4ac1b4600d4df15f8b84/content.htm
Hope this will help you.
Regards:'
Alok -
How to integrate adobe forms using webdynpro-abap
Hi All,
How to integarte adobe forms with webdynpro -abap(se80).
Thanks & Regards
SumanHi suman,
First you have insert a element interactive form in the view.
In the properties of the interactive form you have properties called datasource and pdfsource.
You have to give the data which you want to display in the datasource throught binding.
These data you have to get it from the context. For pdfsource it should be xstring.
There is one more property called templatesource, when you give a name and double click. It automatically goes to SFP and you can create the form of your purpose. While creating it will ask for context. That context will be the same which you have declared in the view or component controller.
Regards,
Arun. -
Hi Experts, how to copy adobe form to a Z form? see details, thanks.
Hi Experts,
how to copy adobe form to a Z form? becuase when I click copy and enter the z form name and click ok, then I got an internal error occured SAP FP API, what is wrong? can anyone tell me the correct way to copy a standard adobe form? thanks in advance!
Kind regards
DawsonHi Dawson,
I have just done the same, but i couldnt get any error, its suceesfully asking for Dev class and saving.
I suggest you to show this msg to your basis guy, he is the person who has to help you out.
Regards,
Sujatha -
How to configure adobe forms in OMLV for printing picking slip
Hello,
I want to configure a adobe form in OMLV transaction. But there is no column for putting adobe forms.
Can you tell me how do configure adobe forms for getting it printed from standard transaction whenever a transfer order is created.
Thanks in advance.Hi Ajay,
You are completely right that you cannot find anything with smartform in the customizing (OMLV). The reason for it: It is not there. It not even exists. Also the latest version of rlvsdr40 has nothing standard concerning smartforms.
I do not know why it is really necessary to use adobe or smartforms.
The only way is to build a new one (ZRLVSDR40). In that new one you have to use the sapscriptname (from OMLV)and treat it as a smartform- name.
I hope my explanation helps. Success.
Gr., Frank
Below how a smartform is called (from invoice)
determine smartform function module
CALL FUNCTION 'SSF_FUNCTION_MODULE_NAME'
EXPORTING
formname = lf_formname
IMPORTING
fm_name = lf_fm_name
EXCEPTIONS
no_form = 1
no_function_module = 2
OTHERS = 3.
IF sy-subrc <> 0.
error handling
retcode = sy-subrc.
IF sy-subrc = 1.
MESSAGE e001(ssfcomposer).
ENDIF.
IF sy-subrc = 2.
MESSAGE e002(ssfcomposer) WITH lf_formname.
ENDIF.
PERFORM protocol_update.
ENDIF.
CALL FUNCTION lf_fm_name
EXPORTING
archive_index = toa_dara
archive_parameters = arc_params
control_parameters = ls_control_param
mail_recipient = ls_recipient
mail_sender = ls_sender
output_options = ls_composer_param
user_settings = ' '
is_nast = nast
is_vbdka = vbdka
is_addres = addr_key
IMPORTING
document_output_info = document_output_info
job_output_info = job_output_info
job_output_options = job_output_options
TABLES
it_vbdpa = tvbdpa "Item information
it_vbdpau = tvbdpau "Subitem numbers
EXCEPTIONS
formatting_error = 1
internal_error = 2
send_error = 3
user_canceled = 4
OTHERS = 5. -
Open PDF Adobe form from workitem in UWL
Hi,
We have a requirement in which a workitem is gettng generated from workflows, And it comes in UWL, So when we execute that workitem it should open a adobe form for notificaton so that approver can reject or approve that notificaton in PDF, But it is openng a SAP transaction rather then adobe form.
we are on ECC 5.0 and portal verion is 7. we are using standard workflow WS5000041 which generates the workitem. It works perfectly fine in ECC 6.0, As there are different standard workflows in ECC 6.0 but the working is same.
Thanks.HI
I think you might have missed out to configure the respective task ID and its respective visualization parameters in the SWFVISU transaction.
Iam not sure what is exactly the flow in the ECC5.0 but if you look at the workflow template , it again incudes a subworkflow, in which you actually have the approve form standard task the task number is TS50000075 and in the swfvisu txn the task is already configured with visualization paramters as Webdynpro aplication and Name sape sa SAP, I think you have to add one more parameter in the DYNPARAM
Regards
Pavan -
Unable to view HCM adobe forms for one employee in sap portal
Dear Sap Gurus,
we are Unable to view HCM adobe forms for one employee in sap portal.
Regards
SrinivasHi,
What error you getting? Did the user has the authorisation? Is his system has Adobe installed?
Please perform normal checks. -
Hello Everybody,
I have created an Adobe form and try to open it from the program with FM but I get and error
"Job already open".
Can someone tell me what could be worng.
Thanks,
Sneha SIngh.in my opinion you get the error when you test it from se37.
create a small testprogramm and it will work!
br
norbert -
Error :-The requested resource does not exist while opening the adobe form
hello Experts,
We are in Portal implementation face with ECC6 EHP4 and Portal EHP1
We have developed adobe form using HCM forms and processes and done the required configuration in SPRO
When we are trying to open the form from ESS we are getting below error
404 not found
The requested resource does not exist.
Please look into this issue and let us know any thing we are missing
Sincerely
Pareshis ADS working correctly?
1. Use transaction SA38 to execute the program FP_TEST_00.
Detailed information about this test program and about how you
should then proceed is given in the Adobe Document Services
Configuration Guide in the Help Portal under:
http://help.sap.com/saphelp_nw2004s/helpdata/en/37/504b8cbc2848a4
94facfdc09a359b1/frameset.htm -> Adobe Document Services
Configuration Guide -> Configuring the Web Service -> Securing
Access to the Web Service ->Configuration Check -> Configuration
Check for PDF-Based Forms in ABAP
- If the FP_TEST_00 form is displayed in the print preview, the
ADS configuration is correct.
-> If you use scenarios with an interactive PDF, proceed with
point 5. Otherwise, proceed with the test under point 6.
- If the system displays an error message instead of a form, the
configuration of ADS is incorrect.
-> Carry out the additional tests from point 2 onwards.
2. Use transaction SA38 to execute the program FP_PDF_TEST_00.
This enables you to check the RFC connection to ADS (see the
reference to the documentation given above).
- If the system displays the version number of ADS, the
configuration of the RFC connection is correct.
read the note 944221
Please paste the whole error? Is any dump in ST22 -
Unable to open the adobe form in NWDS
Hi,
I could not open a pdf form which is developed in NWDS. Its throwing the following error stack...Can anyone help me out on proceedings over this? Any ideas what can be the problem?
javax.xml.rpc.soap.SOAPFaultException: Exception in method rpData.
at com.sap.engine.services.webservices.jaxrpc.wsdl2java.soapbinding.MimeHttpBinding.buildFaultException(MimeHttpBinding.java:643)
at com.sap.engine.services.webservices.jaxrpc.wsdl2java.soapbinding.MimeHttpBinding.processDocumentFault(MimeHttpBinding.java:734)
at com.sap.engine.services.webservices.jaxrpc.wsdl2java.soapbinding.MimeHttpBinding.call(MimeHttpBinding.java:1224)
at com.sap.tc.webdynpro.adsproxy.ConfigBindingStub.rpData(ConfigBindingStub.java:78)
at com.sap.tc.webdynpro.adsproxy.ConfigBindingStub.rpData(ConfigBindingStub.java:95)
at com.sap.tc.webdynpro.pdfobject.core.PDFObject.doSoapCall(PDFObject.java:277)
at com.sap.tc.webdynpro.pdfobject.core.PDFObject.createPDF(PDFObject.java:222)
at com.sap.tc.webdynpro.clientserver.adobe.AdobeFormHelper.createPDFDocumentForUIElement(AdobeFormHelper.java:457)
at com.sap.tc.webdynpro.clientserver.uielib.adobe.impl.InteractiveForm.afterHandleActionEvent(InteractiveForm.java:158)
at com.sap.tc.webdynpro.clientserver.cal.ClientApplication.afterHandleActionEvent(ClientApplication.java:1123)
at com.sap.tc.webdynpro.clientserver.task.WebDynproMainTask.handleActionEvent(WebDynproMainTask.java:402)
at com.sap.tc.webdynpro.clientserver.task.WebDynproMainTask.execute(WebDynproMainTask.java:649)
at com.sap.tc.webdynpro.clientserver.cal.AbstractClient.executeTasks(AbstractClient.java:59)
at com.sap.tc.webdynpro.clientserver.cal.ClientManager.doProcessing(ClientManager.java:252)
at com.sap.tc.webdynpro.serverimpl.defaultimpl.DispatcherServlet.doWebDynproProcessing(DispatcherServlet.java:154)
at com.sap.tc.webdynpro.serverimpl.defaultimpl.DispatcherServlet.doContent(DispatcherServlet.java:116)
at com.sap.tc.webdynpro.serverimpl.defaultimpl.DispatcherServlet.doGet(DispatcherServlet.java:48)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:740)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.runServlet(HttpHandlerImpl.java:392)
at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.handleRequest(HttpHandlerImpl.java:266)
at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:345)
at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:323)
at com.sap.engine.services.httpserver.server.RequestAnalizer.invokeWebContainer(RequestAnalizer.java:865)
at com.sap.engine.services.httpserver.server.RequestAnalizer.handle(RequestAnalizer.java:240)
at com.sap.engine.services.httpserver.server.Client.handle(Client.java:92)
at com.sap.engine.services.httpserver.server.Processor.request(Processor.java:148)
at com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:37)
at com.sap.engine.core.cluster.impl6.session.UnorderedChannel$MessageRunner.run(UnorderedChannel.java:71)
at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)
at java.security.AccessController.doPrivileged(Native Method)
at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:95)
at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:159)
Regards,
Deepthi Lakshmi.A.Hi
Is any updattions nwds inbetween time then that might be problem.
can u please check that ADS configuration once again.
that error meand webservices are not wroking and pdf services not able to capture.
In NWDS goto the webservice prosperctive and test the Adobedocumentservicesec . If it works fine then ok ohterwise some problem in ADS.
Thanks
Lohi. -
How open an interactive form in a tabstrip of Firefox
Hi ,
I have developped an application which involves interactive form . Now I want to display the pdf in a new tabstrip of Firefox.(after clicking on a button).
Do you have an idea to display an interactive form in a new tabstrip,please?
Actually to solve this problem, I have used a "LinkToUrl" UI Component which opens PDF in a new tabstrip of Firefox but I have an other problem that is I MUST clik on the link opening the PDF in a new tabstrip( but I don't want to click).
The code used is :
byte[] pdfSource = wdContext.currentGlobalElement().getPdfobject();
String pdfName = "form.pdf";
IWDResource webResource = WDResourceFactory.createCachedResource(pdfSource,pdfName,WDWebResourceType.PDF);
String pdfUrl2 = webResource.getUrl(WDFileDownloadBehaviour.OPEN_INPLACE.ordinal());
wdContext.currentLinkURLElement().setLink(pdfUrl2);
(The attribute "Link" is the reference of the UI Component.)
Can I execute a code no clicking on the linkURL,is-it possible to call an action dynamically in the code java?.
Please guide me how to goahead.
ThanksHi Manish,
If I get you correctly then you want to Upload a prefilled Adobe IF from some location without any user interaction and save it to some Backend/Temp storage: You need to have something like you have a user inbox and mail comes to this with the Adobe Form as an attachment, you extract the attachment and read it using available Java apis for reading. You can also specify a particular folder where you can place the filled form and then read it using FileInputStream and can save it in the backend after you have it in binary form in your application.
Hope this helps!!
Cheers,
Arafat -
How to Connect Adobe form to Portal
hi sdn friends,
How to connect R/3 Adobe form to the Enterprise Portal / Smart form to the Enterprise Portal
plz help me
thank u,
praveen.That depends...
If you need to display MSS forms into your portal, plz have a look at the Business Package for MSS. Interactive forms are presented in the portal via the ISRForm application (and PCRApplication).
If you need to display your custom made forms into the portal, you can develop your own WebDynpro application that embeds the Adobe Interactive form.
Could you explain more about your requirements?
Cheers,
Noë
Maybe you are looking for
-
Troubles with the type associations
Hello forum, The type and extension association is really delicious, it's time this happens! I've been trying it with moderate success, here are a few experiences, I would love advice for better results: - first the example at http://java.sun.com/jav
-
Where are Hierarchy node names stored in BW?
When I enter hierarchy view of an infoobjects master data, I can see a field called node name. If I want to use that as filter criteria, where do I go to find that? Where is it stored?
-
Can slide transitions fade in and out?
I have a slide show set with fade in transitions, and I want the slides to fade out when the next slide fades in. Can someone please tell me how to do this?? Thanks.
-
Problem with Branch Conditions (Request = Expression 1)
Application Express 3.1.0.00.32 I've looked around on the internet and couldn't find anything to differ from what I thought I was doing correctly. The issue I am having is that I have 4 push buttons (2 on top and 2 on bottom) that when pressed, shoul
-
My IPad 2 connect only to EDGE and Not to 3G. When i use my SIM Card in my I Phone 4, it Shows 3G. Somebody has any idea?