How (or better when) do I get Anna?

My Ovi Suite doesn't offer me the Anna update. My phone (N8) says that all programs are up to date. How or when do I get Anna in Germany? Does it matter that I bought the phone in Switzerland (but registered in Germany)? Ovi Suite 3.1.1.85, phone 014.002

Wow, I can't believe that after all the noise Nokia made about Symbian Anna being released it's still not available worldwide for SIM-free phones at the same time. I have a phone purchased directly from Nokia USA (RM-596) that doesn't show Anna as being avaialble. I've tried WiFi and NSU, and was thinking it was because I don't have Ovi Suite but now that I read this thread, I won't bother installing Ovi Suite.
Nokia doesn't say anything about which product codes will get the update on this page, which is terribly misleading:
http://europe.nokia.com/support/product-support/device-software-update
They simply state, "* Please note that the latest software version may not be available for your device, and the benefits listed may not be available to you, or be available in selected countries." Wouldn't it be better to let me input my product code or IMEI or something and I could get an instant response on whether the update is available or not, and why not, if it is not available?
Sucks.
Lumia 920, Lumia 800
Nokia N8-00 (NAM, Product Code: 059C8T6), Symbian Belle, Type RM-596, 111.030.0609
Nokia 5800 XpressMusic (NAM, Product Code: 0577454) Software v51.2.007, Type RM-428

Similar Messages

How to install when I keep getting the following massage on windows 7 64 bit with or with firewall on and vwith or with virus protection on here is post This installation package could net be opened verify that the package exist and that you can access

how to install when I keep getting the following massage on windows 7 64 bit with or with firewall on and with or with virus protection on here is post " This installation package could net be opened verify that the package exist and that you can access" same when trying to install quicktime

I'd first try downloading an installer from the Apple website using a different web browser:
http://www.apple.com/quicktime/download/
If you use Firefox instead of IE for the download (or vice versa), do you get a working installer?

How to find when a ztable gets populated?

Hi Folks,
Closing balance not carrying forward to Opening Balance-MM
Previously I posted a question with the above said subject.But couldn't get any right lead.
The problem is we have developed a zreport to get the RG1 summary of finished goods.For that the previous team who worked on this had copied the table
j_2irg1bal to z2irg1bal.I want to know when and how this ztable will get populated.
Can anyone here please go through the BOLD part of this code and let me know.
K.Kiran.
REPORT zxxx MESSAGE-ID z_apd.
*& Includes *
INCLUDE <icon>.
*& Tables *
TABLES : j_1irg1,
j_2irg1bal,
z2irg1bal,
ser03,
objk.
*& Selection Screen *
SELECTION-SCREEN : BEGIN OF BLOCK blk1 WITH FRAME TITLE text-001.
PARAMETERS : p_exgrp TYPE j_1irg1-exgrp OBLIGATORY,
p_stdate LIKE sy-datum OBLIGATORY,
p_endate LIKE sy-datum OBLIGATORY.
SELECT-OPTIONS s_chapid FOR j_1irg1-chapid .
SELECTION-SCREEN : END OF BLOCK blk1.
*& Data Declaration *
Internal Tables
DATA : it_display TYPE TABLE OF zj1irg1,
it_final TYPE TABLE OF zj1irg1,
it_alv TYPE TABLE OF zj1irg1,
Work Areas
wa_display TYPE zj1irg1,
wa_alv TYPE zj1irg1,
it_display1 TYPE TABLE OF zj1irg1,
wa_display1 TYPE zj1irg1,
wa_alv1 TYPE zj1irg1.
DATA: BEGIN OF it_itab OCCURS 0.
INCLUDE STRUCTURE zj1irg1.
DATA: END OF it_itab.
DATA : BEGIN OF itab1 OCCURS 0,
matnr LIKE j_1irg1-matnr,
END OF itab1.
DATA : BEGIN OF itab2 OCCURS 0,
cpudt LIKE j_1irg1-cpudt,
END OF itab2.
DATA : BEGIN OF itab3 OCCURS 0.
INCLUDE STRUCTURE j_1irg1.
DATA: END OF itab3.
DATA : itab4 LIKE j_1irg1 OCCURS 0 WITH HEADER LINE,
itab5 LIKE j_1irg1 OCCURS 0 WITH HEADER LINE.
DATA : BEGIN OF itab6 OCCURS 0.
INCLUDE STRUCTURE j_1irg1.
DATA : sernr LIKE objk-sernr.
DATA: END OF itab6.
DATA : BEGIN OF itab61 OCCURS 0.
INCLUDE STRUCTURE j_1irg1.
DATA: sernr LIKE objk-sernr.
DATA: END OF itab61.
DATA : itab7 LIKE j_2irg1bal OCCURS 0 WITH HEADER LINE,
it_bal LIKE j_2irg1bal OCCURS 0 WITH HEADER LINE,
it_bal1 LIKE j_2irg1bal OCCURS 0 WITH HEADER LINE.
DATA: qty_menge LIKE j_1irg1-menge,
iss_menge LIKE j_1irg1-menge,
tot_menge LIKE j_1irg1-menge,
op_menge LIKE j_1irg1-menge,
matnr LIKE j_1irg1-matnr,
exgrp LIKE j_1irg1-exgrp ,
cpudt LIKE j_1irg1-cpudt.
*for checcking lines of itab
DATA: n1 TYPE i.
Others
DATA : v_bwart TYPE mseg-bwart,
v_index TYPE i,
v_index1 TYPE i,
count(4) TYPE n VALUE '0',
neg TYPE char1 VALUE '-',
menge TYPE char16,
count_1 TYPE i,
count_2 TYPE i,
count_3 TYPE i,
count12(4) TYPE n VALUE '0',
count13(4) TYPE n VALUE '0'.
*Ranges
RANGES: v_bwart1 FOR mseg-bwart.
For ALV Display
DATA : gs_variant TYPE disvariant,
gs_layout TYPE lvc_s_layo,
c_stk TYPE scrfname VALUE 'ZRG1',
custom_container TYPE REF TO cl_gui_custom_container.
CLASS lcl_event_receiver DEFINITION DEFERRED.
DATA : grid1 TYPE REF TO cl_gui_alv_grid,
event_receiver TYPE REF TO lcl_event_receiver,
ok_code TYPE sy-ucomm,
it_fieldcatalog TYPE lvc_t_fcat,
wafieldcatlog TYPE LINE OF lvc_t_fcat,
lt_rows TYPE lvc_t_row,
wa_rows TYPE LINE OF lvc_t_row.
*& Start of Selection *
START-OF-SELECTION.
IMPORT s_chapid FROM MEMORY ID 'SCHAPID'.
PERFORM get_data.
IF it_display[] IS INITIAL.
No Details Available
MESSAGE i017(z_apd) WITH text-005.
STOP.
ELSE.
Display the Details on the Screen
sort it_display by matnr.
*sort it_display by cpudt RISINDR RISINDI matnr.
<b>LOOP AT it_display INTO wa_display.
ON CHANGE OF wa_display-matnr.
*insert
*Check record exits
SELECT SINGLE * FROM z2irg1bal
WHERE
exgrp = exgrp AND
matnr = matnr AND
form = 'P' AND
cb_finish = tot_menge AND
datum = cpudt.
*If record does not exists
*Update balance Table.
IF count12 GE 1.
IF sy-subrc NE 0.
z2irg1bal-mandt = sy-mandt.
z2irg1bal-exgrp = exgrp.
z2irg1bal-matnr = matnr.
z2irg1bal-form = 'P'.
z2irg1bal-cb_finish = tot_menge.
z2irg1bal-datum = cpudt.
INSERT z2irg1bal ."values wa_display.
COMMIT WORK.
ENDIF.
Start of Insertion
IF sy-subrc EQ 0.
z2irg1bal-mandt = sy-mandt.
z2irg1bal-exgrp = exgrp.
z2irg1bal-matnr = matnr.
z2irg1bal-form = 'P'.
z2irg1bal-cb_finish = tot_menge.
z2irg1bal-datum = cpudt.
UPDATE z2irg1bal SET cb_finish = z2irg1bal-cb_finish
WHERE exgrp = z2irg1bal-exgrp AND
datum = z2irg1bal-datum AND
matnr = z2irg1bal-matnr AND
form = 'P'.
ENDIF.
End of Insertion.
ENDIF.</b>CLEAR: qty_menge,
iss_menge,
tot_menge,
count,
matnr,
cpudt,
exgrp.
ENDON.
loop at itab6.
AT NEW matnr.
v_index = 1.
count = count + 1 .
ENDAT.
IF v_index = 1.
CLEAR v_index.
*INsert for adding start
IF wa_display-risind = 'R'.
*wa_display-OP_FINISH = wa_display-OP_FINISH +
wa_display-CB_FINISH +
wa_display-MENGE.
wa_display-op_finish = wa_display-menge.
qty_menge = wa_display-op_finish.
IF wa_display-status = space.
tot_menge = tot_menge + qty_menge + wa_display-cb_finish .
ELSE.
tot_menge = tot_menge - qty_menge + wa_display-cb_finish.
ENDIF.
*tot_menge = op_menge.
op_menge = tot_menge.
ELSE.
*Qty Issued
wa_display-op_bond = wa_display-op_finish - wa_display-menge.
IF wa_display-op_bond LT 0.
iss_menge = wa_display-op_bond.
iss_menge = ABS( iss_menge ).
*Start of modification
tot_MENGE = tot_MENGE - iss_MENGE ."
IF count LE 1.
tot_menge = wa_display-cb_finish - iss_menge ."
ELSE.
tot_menge = tot_menge - iss_menge ."
ENDIF.
*End of modification
op_menge = tot_menge.
ENDIF.
ENDIF.
*wa_display-MENGE_FINI = wa_display-OP_FINISH - wa_display-OP_BOND.
*tot_MENGE = tot_MENGE + qty_MENGE - iss_MENGE .
wa_display-menge_fini = tot_menge.
**matnr for insert
matnr = wa_display-matnr.
*excise group
exgrp = wa_display-exgrp.
*Date
cpudt = wa_display-cpudt.
*Opening Balance
*Insert start
*if count le 1.
if wa_display-RISIND = 'R'.
wa_display-CB_FINISH = wa_display-CB_FINISH + qty_MENGE.
else.
wa_display-CB_FINISH = wa_display-CB_FINISH - iss_MENGE.
endif.
*endif.
*Insert End
IF count GT 1.
IF wa_display-risind = 'R'.
wa_display-cb_finish = tot_menge - qty_menge.
ELSE.
wa_display-cb_finish = tot_menge + iss_menge.
ENDIF.
ENDIF.
*check it_display-SERIALNO = wa_display-SERIALNO.
MODIFY it_display FROM wa_display.
*INsert for adding end
*move-corresponding wa_display to it_itab.
*append it_itab.
*check it_itab-SERIALNO = wa_display-SERIALNO.
*if sy-subrc = 0.
*endif.
*Insert to update closng to balance to Rg1bal table
*start
count12 = count12 + 1.
*for last record
AT LAST.
*Check record exits
SELECT SINGLE * FROM z2irg1bal
WHERE
exgrp = exgrp AND
matnr = matnr AND
form = 'P' AND
cb_finish = tot_menge AND
datum = cpudt.
*If record does not exists
*Update balance Table.
IF count12 GE 1.
IF sy-subrc NE 0.
z2irg1bal-mandt = sy-mandt.
z2irg1bal-exgrp = exgrp.
z2irg1bal-matnr = matnr.
z2irg1bal-form = 'P'.
z2irg1bal-cb_finish = tot_menge.
z2irg1bal-datum = cpudt.
INSERT z2irg1bal ."values wa_display.
COMMIT WORK.
Start of Insertion
IF sy-subrc EQ 0.
z2irg1bal-mandt = sy-mandt.
z2irg1bal-exgrp = exgrp.
z2irg1bal-matnr = matnr.
z2irg1bal-form = 'P'.
z2irg1bal-cb_finish = tot_menge.
z2irg1bal-datum = cpudt.
UPDATE z2irg1bal SET cb_finish = z2irg1bal-cb_finish
WHERE exgrp = z2irg1bal-exgrp AND
datum = z2irg1bal-datum AND
matnr = z2irg1bal-matnr AND
form = 'P'.
ENDIF.
End of Insertion
ENDIF.
ENDIF.
ENDAT.
*Insert to update closng to balance to Rg1bal table
*end
MOVE-CORRESPONDING wa_display TO wa_alv.
APPEND wa_alv TO it_alv.
append itab6 to it_alv.
ENDIF.
ENDLOOP.
loop at it_alv into wa_alv.
wa_alv-exgrp = wa_alv-exgrp.
wa_alv-SYEAR = wa_alv-syear.
wa_alv-SERIALNO = wa_alv-SERIALNO.
endloop.
EXPORT it_alv TO MEMORY ID 'ABCD'.
call screen 100.
ENDIF.
*& End of Selection *
END-OF-SELECTION.
*& Class Definition *
CLASS lcl_event_receiver DEFINITION.
PUBLIC SECTION.
METHODS:
handle_toolbar
FOR EVENT toolbar OF cl_gui_alv_grid
IMPORTING e_object e_interactive,
handle_user_command
FOR EVENT user_command OF cl_gui_alv_grid
IMPORTING e_ucomm,
handle_double_click
FOR EVENT double_click OF cl_gui_alv_grid
IMPORTING e_row e_column.
PRIVATE SECTION.
ENDCLASS. "lcl_event_receiver DEFINITION
*& Class Implementation *
CLASS lcl_event_receiver IMPLEMENTATION.
METHOD handle_toolbar.
Local Variables
DATA: ls_toolbar TYPE stb_button.
append a separator to normal toolbar
CLEAR ls_toolbar.
MOVE 3 TO ls_toolbar-butn_type.
APPEND ls_toolbar TO e_object->mt_toolbar.
append an icon to to show printing
CLEAR ls_toolbar.
MOVE 'PRINT' TO ls_toolbar-function.
MOVE icon_print TO ls_toolbar-icon.
MOVE 'Print Receipts' TO ls_toolbar-quickinfo.
MOVE ' Print' TO ls_toolbar-text.
MOVE ' ' TO ls_toolbar-disabled.
APPEND ls_toolbar TO e_object->mt_toolbar.
ENDMETHOD. " Handle_toolbar
METHOD handle_user_command.
CASE e_ucomm.
WHEN 'PRINT'.
REFRESH : lt_rows , it_final.
CALL METHOD grid1->get_selected_rows
IMPORTING
et_index_rows = lt_rows.
CALL METHOD cl_gui_cfw=>flush.
LOOP AT lt_rows INTO wa_rows.
READ TABLE it_alv INDEX wa_rows-index INTO wa_alv.
LOOP AT it_display INTO wa_display
WHERE mblnr = wa_alv-mblnr.
APPEND wa_display TO it_final.
ENDLOOP.
ENDLOOP.
perform display_form.
ENDCASE.
ENDMETHOD. "handle_user_command
METHOD handle_double_click.
IF e_column = 'MBLNR'.
READ TABLE it_alv INDEX e_row-index INTO wa_alv.
IF sy-subrc = 0.
REFRESH it_final.
LOOP AT it_display INTO wa_display
WHERE mblnr = wa_alv-mblnr.
APPEND wa_display TO it_final.
ENDLOOP.
PERFORM call_migo.
ENDIF.
ENDIF.
ENDMETHOD. "handle_double_click
ENDCLASS. "lcl_event_receiver IMPLEMENTATION
*& Form get_data
text
--> p1 text
<-- p2 text
FORM get_data .
*Select only for matnr and chapid from table
SELECT matnr FROM j_1irg1
APPENDING CORRESPONDING FIELDS OF TABLE itab1
WHERE exgrp = p_exgrp
AND
WERKS = P_WERKS
and
MATNR in s_MATNR
and
CPUDT in s_CPUDT.
cpudt BETWEEN p_stdate AND p_endate
AND
*Chapid
chapid IN s_chapid
ORDER BY matnr.
SORT itab1 BY matnr. " for performance
DELETE ADJACENT DUPLICATES FROM itab1 COMPARING matnr .
SELECT cpudt FROM j_1irg1
APPENDING CORRESPONDING FIELDS OF TABLE itab2
WHERE exgrp = p_exgrp
AND
cpudt BETWEEN p_stdate AND p_endate
AND
*Chapid
chapid IN s_chapid
ORDER BY cpudt.
SORT itab2 BY cpudt. " for Performance
DELETE ADJACENT DUPLICATES FROM itab2 COMPARING cpudt .
LOOP AT itab1.
LOOP AT itab2.
*on change of itab1-matnr or itab2-cpudt.
*select * from J_1IRG1
CLEAR itab3.
SELECT * FROM j_1irg1
*into itab3
APPENDING CORRESPONDING FIELDS OF TABLE itab3
WHERE matnr = itab1-matnr
AND
cpudt = itab2-cpudt.
*count = count + 1.
IF sy-subrc EQ 0.
LOOP AT itab3.
*count = count + 1.
*READ TABLE itab3 INDEX count."1.
IF itab3-risind = 'R'.
MOVE-CORRESPONDING itab3 TO itab4.
APPEND itab4.
DELETE itab3.
MOVE-CORRESPONDING itab4 TO itab6.
APPEND itab6.
CLEAR itab4.
ELSE.
MOVE-CORRESPONDING itab3 TO itab5.
APPEND itab5.
DELETE itab3.
MOVE-CORRESPONDING itab5 TO itab6.
APPEND itab6.
CLEAR itab5.
ENDIF.
ENDLOOP.
ENDIF.
*endon.
ENDLOOP.
ENDLOOP.
SELECT * FROM z2irg1bal
APPENDING CORRESPONDING FIELDS OF TABLE itab7
WHERE exgrp = p_exgrp
AND
datum LE p_stdate
ORDER BY datum.
SORT itab7 BY datum.
DELETE ADJACENT DUPLICATES FROM itab7 COMPARING datum .
*insert Start
LOOP AT itab6.
DELETE itab7 WHERE matnr NE itab6-matnr.
ENDLOOP.
*insert End
*insert Start
LOOP AT itab6.
CLEAR itab61. REFRESH itab61.
CLEAR wa_display.
MOVE-CORRESPONDING itab6 TO wa_display.
EQPT Serno
count13 = 1.
SELECT SINGLE obknr FROM ser03 INTO ser03-obknr WHERE
mblnr EQ itab6-mblnr
AND mjahr EQ itab6-mjahr.
IF sy-subrc EQ 0.
SELECT sernr FROM objk INTO CORRESPONDING
FIELDS OF TABLE itab61 WHERE
obknr EQ ser03-obknr.
DESCRIBE TABLE itab61 LINES n1.
*do N1 times.
LOOP AT itab61.
IF count13 EQ 1.
wa_display-sernr = itab61-sernr.
ENDIF.
IF count13 EQ 2.
wa_display-sernr1 = itab61-sernr.
ENDIF.
IF count13 EQ 3.
wa_display-sernr2 = itab61-sernr.
ENDIF.
IF count13 EQ 4.
wa_display-sernr3 = itab61-sernr.
ENDIF.
IF count13 EQ 5.
wa_display-sernr4 = itab61-sernr.
ENDIF.
IF count13 EQ 6.
wa_display-sernr5 = itab61-sernr.
ENDIF.
IF count13 EQ 7.
wa_display-sernr6 = itab61-sernr.
ENDIF.
if count13 eq 8.
objk-SERNR8 = objk-SERNR.
endif.
if count13 eq 9.
objk-SERNR9 = objk-SERNR.
endif.
count13 = count13 + 1.
endselect.
ENDLOOP.
*enddo.
ENDIF.
endif.
*End of Modification Eqpt Serial No
MOVE-CORRESPONDING itab6 TO wa_display.
SELECT * FROM z2irg1bal
APPENDING CORRESPONDING FIELDS OF TABLE it_bal1
WHERE matnr = itab6-matnr
AND datum LE p_stdate
AND exgrp = itab6-exgrp.
SORT it_bal1 DESCENDING .
READ TABLE it_bal1 INDEX 1.
ON CHANGE OF itab6-matnr .
wa_display-cb_finish = it_bal1-cb_finish.
ENDON.
AT LAST ."matnr.
wa_display-cb_finish = it_bal1-cb_finish.
ENDAT.
APPEND wa_display TO it_display .
CLEAR wa_display-cb_finish.
CLEAR it_bal1. REFRESH it_bal1.
ENDLOOP.
SELECT * FROM j_1irg1
APPENDING CORRESPONDING FIELDS OF TABLE it_itab
WHERE exgrp = p_exgrp
AND
cpudt BETWEEN p_stdate AND p_endate.
DESCRIBE TABLE it_itab[] LINES count_1.
count_3 = count_1 + 1.
DESCRIBE TABLE it_display[] LINES count_2.
IF it_display IS NOT INITIAL.
DELETE it_display FROM count_3 TO count_2.
ENDIF.
*start of insertion
DELETE it_display WHERE status = 'C'.
LOOP AT it_display INTO wa_display.
CLEAR wa_display-cb_finish.
MODIFY it_display FROM wa_display.
ON CHANGE OF wa_display-matnr .
SELECT * FROM z2irg1bal
INTO CORRESPONDING FIELDS OF TABLE it_bal1
WHERE matnr = wa_display-matnr
AND datum LE p_stdate
AND exgrp = wa_display-exgrp.
IF sy-subrc = 0.
SORT it_bal1 DESCENDING .
READ TABLE it_bal1 INDEX 1.
wa_display-cb_finish = it_bal1-cb_finish.
MODIFY it_display FROM wa_display.
ENDIF.
ENDON.
ENDLOOP.
*End of insertion
ENDFORM. " get_data
*& Module STATUS_0100 OUTPUT
text
MODULE status_0100 OUTPUT.
SET PF-STATUS 'ZRG1'.
SET TITLEBAR 'ZRG1'.
DATA: lt_exclude TYPE ui_functions.
IF custom_container IS INITIAL.
Create the Custom Container
CREATE OBJECT custom_container
EXPORTING
container_name = c_stk.
Create an instance of alv control
CREATE OBJECT grid1
EXPORTING
i_parent = custom_container.
Layout Settings
gs_layout-sel_mode = 'A'. " Multiple Lines
MOVE 'RG1 Register' TO gs_layout-grid_title.
Prepare the Field Catalog
PERFORM prepare_catalog.
To Exclude the PRINT Button from the Standard toolbar of ALV
PERFORM exclude_tb_functions CHANGING lt_exclude.
Display the List for ALV Display
CALL METHOD grid1->set_table_for_first_display
EXPORTING
it_toolbar_excluding = lt_exclude
is_layout = gs_layout
CHANGING
it_fieldcatalog = it_fieldcatalog[]
it_outtab = it_alv[].
CREATE OBJECT event_receiver.
SET HANDLER event_receiver->handle_user_command FOR grid1.
SET HANDLER event_receiver->handle_toolbar FOR grid1.
SET HANDLER event_receiver->handle_double_click FOR grid1.
CALL METHOD grid1->set_toolbar_interactive.
ENDIF.
CALL METHOD cl_gui_control=>set_focus
EXPORTING
control = grid1.
ENDMODULE. " STATUS_0100 OUTPUT
*& Form exclude_tb_functions
text
<--P_LT_EXCLUDE text
FORM exclude_tb_functions CHANGING pt_exclude TYPE ui_functions.
Local Varaibles
DATA ls_exclude TYPE ui_func.
ls_exclude = cl_gui_alv_grid=>mc_fc_print.
APPEND ls_exclude TO pt_exclude.
ENDFORM. " exclude_tb_functions
*& Form prepare_catalog
text
--> p1 text
<-- p2 text
FORM prepare_catalog .
DATA : v_index TYPE i.
*Entry Date
v_index = v_index + 1.
wafieldcatlog-fieldname = 'CPUDT'.
wafieldcatlog-tabname = 'IT_ALV'.
wafieldcatlog-seltext = 'RG1 Entry Date'.
wafieldcatlog-reptext = 'RG1 Entry Date'.
wafieldcatlog-hotspot = ' '.
wafieldcatlog-col_pos = v_index.
APPEND wafieldcatlog TO it_fieldcatalog.
CLEAR wafieldcatlog-reptext.
CLEAR wafieldcatlog-key.
*Serial No
v_index = v_index + 1.
wafieldcatlog-fieldname = 'SERIALNO'.
wafieldcatlog-tabname = 'IT_ALV'.
wafieldcatlog-seltext = 'RG1 serial number'.
wafieldcatlog-reptext = 'RG1 serial number'.
wafieldcatlog-hotspot = ' '.
wafieldcatlog-col_pos = v_index.
APPEND wafieldcatlog TO it_fieldcatalog.
CLEAR wafieldcatlog-reptext.
CLEAR wafieldcatlog-key.
v_index = v_index + 1.
wafieldcatlog-fieldname = 'CHAPID'.
wafieldcatlog-tabname = 'IT_ALV'.
wafieldcatlog-seltext = 'Chapter ID'.
wafieldcatlog-reptext = 'Chapter ID'.
wafieldcatlog-hotspot = ' '.
wafieldcatlog-col_pos = v_index.
APPEND wafieldcatlog TO it_fieldcatalog.
CLEAR wafieldcatlog-reptext.
CLEAR wafieldcatlog-key.
v_index = v_index + 1.
wafieldcatlog-fieldname = 'MBLNR'.
wafieldcatlog-tabname = 'IT_ALV'.
wafieldcatlog-seltext = 'Number of Material Document'.
wafieldcatlog-reptext = 'Number of Material Document'.
wafieldcatlog-hotspot = ' '.
wafieldcatlog-col_pos = v_index.
APPEND wafieldcatlog TO it_fieldcatalog.
CLEAR wafieldcatlog-reptext.
CLEAR wafieldcatlog-key.
*Item
v_index = v_index + 1.
wafieldcatlog-fieldname = 'ZEILE'.
wafieldcatlog-tabname = 'IT_ALV'.
wafieldcatlog-seltext = 'Item in Material Document'.
wafieldcatlog-reptext = 'Item in Material Document'.
wafieldcatlog-hotspot = ' '.
wafieldcatlog-col_pos = v_index.
APPEND wafieldcatlog TO it_fieldcatalog.
CLEAR wafieldcatlog-reptext.
CLEAR wafieldcatlog-key.
v_index = v_index + 1.
wafieldcatlog-fieldname = 'BWART'.
wafieldcatlog-tabname = 'IT_ALV'.
wafieldcatlog-seltext = 'Movement Type'.
wafieldcatlog-reptext = 'Movement Type'.
wafieldcatlog-hotspot = ' '.
wafieldcatlog-col_pos = v_index.
APPEND wafieldcatlog TO it_fieldcatalog.
CLEAR wafieldcatlog-reptext.
CLEAR wafieldcatlog-key.
v_index = v_index + 1.
wafieldcatlog-fieldname = 'MENGE'.
wafieldcatlog-tabname = 'IT_ALV'.
wafieldcatlog-seltext = 'Quantity'.
wafieldcatlog-reptext = 'Quantity'.
wafieldcatlog-hotspot = ' '.
wafieldcatlog-col_pos = v_index.
wafieldcatlog-DO_SUM = 'X'.
append wafieldcatlog to it_fieldcatalog.
clear wafieldcatlog-reptext.
clear wafieldcatlog-key.
*Base Unit of Measure
v_index = v_index + 1.
wafieldcatlog-fieldname = 'MEINS'.
wafieldcatlog-tabname = 'IT_ALV'.
wafieldcatlog-seltext = 'Base Unit of Measure'.
wafieldcatlog-reptext = 'Base Unit of Measure'.
wafieldcatlog-hotspot = ' '.
wafieldcatlog-col_pos = v_index.
wafieldcatlog-do_sum = 'X'.
APPEND wafieldcatlog TO it_fieldcatalog.
CLEAR wafieldcatlog-reptext.
CLEAR wafieldcatlog-key.
v_index = v_index + 1.
wafieldcatlog-fieldname = 'RISIND'.
wafieldcatlog-tabname = 'IT_ALV'.
wafieldcatlog-seltext = 'Goods Movement Direction'.
wafieldcatlog-reptext = 'Goods Movement Direction'.
wafieldcatlog-hotspot = ' '.
wafieldcatlog-col_pos = v_index.
APPEND wafieldcatlog TO it_fieldcatalog.
CLEAR wafieldcatlog-reptext.
CLEAR wafieldcatlog-key.
*Material Number
v_index = v_index + 1.
wafieldcatlog-fieldname = 'MATNR'.
wafieldcatlog-tabname = 'IT_ALV'.
wafieldcatlog-seltext = 'Material Number'.
wafieldcatlog-reptext = 'Material Number'.
wafieldcatlog-hotspot = ' '.
wafieldcatlog-col_pos = v_index.
APPEND wafieldcatlog TO it_fieldcatalog.
CLEAR wafieldcatlog-reptext.
CLEAR wafieldcatlog-key.
*CB_FINISH
v_index = v_index + 1.
wafieldcatlog-fieldname = 'CB_FINISH'.
wafieldcatlog-tabname = 'IT_ALV'.
wafieldcatlog-seltext = 'Opening Balance'.
wafieldcatlog-reptext = 'Opening Balance'.
wafieldcatlog-hotspot = ' '.
wafieldcatlog-col_pos = v_index.
APPEND wafieldcatlog TO it_fieldcatalog.
CLEAR wafieldcatlog-reptext.
CLEAR wafieldcatlog-key.
*materail manufactured
v_index = v_index + 1.
wafieldcatlog-fieldname = 'OP_FINISH'.
wafieldcatlog-tabname = 'IT_ALV'.
wafieldcatlog-seltext = 'Qty Manufactured'.
wafieldcatlog-reptext = 'Qty Manufactured'.
wafieldcatlog-hotspot = ' '.
wafieldcatlog-col_pos = v_index.
APPEND wafieldcatlog TO it_fieldcatalog.
CLEAR wafieldcatlog-reptext.
CLEAR wafieldcatlog-key.
*Material Issued
v_index = v_index + 1.
wafieldcatlog-fieldname = 'OP_BOND'.
wafieldcatlog-tabname = 'IT_ALV'.
wafieldcatlog-seltext = 'Qty Issue'.
wafieldcatlog-reptext = 'Qty Issue'.
wafieldcatlog-hotspot = ' '.
wafieldcatlog-col_pos = v_index.
APPEND wafieldcatlog TO it_fieldcatalog.
CLEAR wafieldcatlog-reptext.
CLEAR wafieldcatlog-key.
*Total
v_index = v_index + 1.
wafieldcatlog-fieldname = 'MENGE_FINI'.
wafieldcatlog-tabname = 'IT_ALV'.
wafieldcatlog-seltext = 'Closing Balance'.
wafieldcatlog-reptext = 'Closing Balance'.
wafieldcatlog-hotspot = ' '.
wafieldcatlog-col_pos = v_index.
APPEND wafieldcatlog TO it_fieldcatalog.
CLEAR wafieldcatlog-reptext.
CLEAR wafieldcatlog-key.
*Material Description
v_index = v_index + 1.
wafieldcatlog-fieldname = 'MAKTX'.
wafieldcatlog-tabname = 'IT_ALV'.
wafieldcatlog-seltext = 'Material Description'.
wafieldcatlog-reptext = 'Material Description'.
wafieldcatlog-hotspot = ' '.
wafieldcatlog-col_pos = v_index.
APPEND wafieldcatlog TO it_fieldcatalog.
CLEAR wafieldcatlog-reptext.
CLEAR wafieldcatlog-key.
*Storage Location
v_index = v_index + 1.
wafieldcatlog-fieldname = 'LGORT'.
wafieldcatlog-tabname = 'IT_ALV'.
wafieldcatlog-seltext = 'Storage Location'.
wafieldcatlog-reptext = 'Storage Location'.
wafieldcatlog-hotspot = ' '.
wafieldcatlog-col_pos = v_index.
APPEND wafieldcatlog TO it_fieldcatalog.
CLEAR wafieldcatlog-reptext.
CLEAR wafieldcatlog-key.
*Goods Movement Direction
v_index = v_index + 1.
wafieldcatlog-fieldname = 'RISIND'.
wafieldcatlog-tabname = 'IT_ALV'.
wafieldcatlog-seltext = 'Goods Movement Direction'.
wafieldcatlog-reptext = 'Goods Movement Direction'.
wafieldcatlog-hotspot = ' '.
wafieldcatlog-col_pos = v_index.
APPEND wafieldcatlog TO it_fieldcatalog.
CLEAR wafieldcatlog-reptext.
CLEAR wafieldcatlog-key.
*Reference Document 1
v_index = v_index + 1.
wafieldcatlog-fieldname = 'RDOC1'.
wafieldcatlog-tabname = 'IT_ALV'.
wafieldcatlog-seltext = 'Reference Document 1'.
wafieldcatlog-reptext = 'Reference Document 1'.
wafieldcatlog-hotspot = ' '.
wafieldcatlog-col_pos = v_index.
APPEND wafieldcatlog TO it_fieldcatalog.
CLEAR wafieldcatlog-reptext.
CLEAR wafieldcatlog-key.
*Excise Duty Base Amount
v_index = v_index + 1.
wafieldcatlog-fieldname = 'EXBAS'.
wafieldcatlog-tabname = 'IT_ALV'.
wafieldcatlog-seltext = 'Excise Duty Base Amount'.
wafieldcatlog-reptext = 'Excise Duty Base Amount'.
wafieldcatlog-hotspot = ' '.
wafieldcatlog-col_pos = v_index.
APPEND wafieldcatlog TO it_fieldcatalog.
CLEAR wafieldcatlog-reptext.
CLEAR wafieldcatlog-key.
*Basic Excise Duty
v_index = v_index + 1.
wafieldcatlog-fieldname = 'EXBED'.
wafieldcatlog-tabname = 'IT_ALV'.
wafieldcatlog-seltext = 'Basic Excise Duty'.
wafieldcatlog-reptext = 'Basic Excise Duty'.
wafieldcatlog-hotspot = ' '.
wafieldcatlog-col_pos = v_index.
APPEND wafieldcatlog TO it_fieldcatalog.
CLEAR wafieldcatlog-reptext.
CLEAR wafieldcatlog-key.
*Additional Excise Duty
v_index = v_index + 1.
wafieldcatlog-fieldname = 'EXAED'.
wafieldcatlog-tabname = 'IT_ALV'.
wafieldcatlog-seltext = 'Additional Excise Duty'.
wafieldcatlog-reptext = 'Additional Excise Duty'.
wafieldcatlog-hotspot = ' '.
wafieldcatlog-col_pos = v_index.
APPEND wafieldcatlog TO it_fieldcatalog.
CLEAR wafieldcatlog-reptext.
CLEAR wafieldcatlog-key.
*Special Excise Duty
v_index = v_index + 1.
wafieldcatlog-fieldname = 'EXSED'.
wafieldcatlog-tabname = 'IT_ALV'.
wafieldcatlog-seltext = 'Special Excise Duty'.
wafieldcatlog-reptext = 'Special Excise Duty'.
wafieldcatlog-hotspot = ' '.
wafieldcatlog-col_pos = v_index.
APPEND wafieldcatlog TO it_fieldcatalog.
CLEAR wafieldcatlog-reptext.
CLEAR wafieldcatlog-key.
*Cess amount
v_index = v_index + 1.
wafieldcatlog-fieldname = 'CESS'.
wafieldcatlog-tabname = 'IT_ALV'.
wafieldcatlog-seltext = 'Cess amount'.
wafieldcatlog-reptext = 'Cess amount'.
wafieldcatlog-hotspot = ' '.
wafieldcatlog-col_pos = v_index.
APPEND wafieldcatlog TO it_fieldcatalog.
CLEAR wafieldcatlog-reptext.
CLEAR wafieldcatlog-key.
*ECS Value
v_index = v_index + 1.
wafieldcatlog-fieldname = 'ECS'.
wafieldcatlog-tabname = 'IT_ALV'.
wafieldcatlog-seltext = 'ECS Value'.
wafieldcatlog-reptext = 'ECS Value'.
wafieldcatlog-hotspot = ' '.
wafieldcatlog-col_pos = v_index.
APPEND wafieldcatlog TO it_fieldcatalog.
CLEAR wafieldcatlog-reptext.
CLEAR wafieldcatlog-key.
**Register Entry Status
v_index = v_index + 1.
wafieldcatlog-fieldname = 'STATUS'.
wafieldcatlog-tabname = 'IT_ALV'.
wafieldcatlog-seltext = 'Register Entry Status'.
wafieldcatlog-reptext = 'Register Entry Status'.
wafieldcatlog-hotspot = ' '.
wafieldcatlog-col_pos = v_index.
append wafieldcatlog to it_fieldcatalog.
clear wafieldcatlog-reptext.
clear wafieldcatlog-key.
*EQPT Serno 1 Value
v_index = v_index + 1.
wafieldcatlog-fieldname = 'SERNR'.
wafieldcatlog-tabname = 'IT_ALV'.
wafieldcatlog-seltext = 'Serial number'.
wafieldcatlog-reptext = 'Serial number'.
wafieldcatlog-hotspot = ' '.
wafieldcatlog-col_pos = v_index.
APPEND wafieldcatlog TO it_fieldcatalog.
CLEAR wafieldcatlog-reptext.
CLEAR wafieldcatlog-key.
*EQPT Serno 2 Value
v_index = v_index + 1.
wafieldcatlog-fieldname = 'SERNR1'.
wafieldcatlog-tabname = 'IT_ALV'.
wafieldcatlog-seltext = 'Serial number'.
wafieldcatlog-reptext = 'Serial number'.
wafieldcatlog-hotspot = ' '.
wafieldcatlog-col_pos = v_index.
APPEND wafieldcatlog TO it_fieldcatalog.
CLEAR wafieldcatlog-reptext.
CLEAR wafieldcatlog-key.
*EQPT Serno 3 Value
v_index = v_index + 1.
wafieldcatlog-fieldname = 'SERNR2'.
wafieldcatlog-tabname = 'IT_ALV'.
wafieldcatlog-seltext = 'Serial number'.
wafieldcatlog-reptext = 'Serial number'.
wafieldcatlog-hotspot = ' '.
wafieldcatlog-col_pos = v_index.
APPEND wafieldcatlog TO it_fieldcatalog.
CLEAR wafieldcatlog-reptext.
CLEAR wafieldcatlog-key.
*EQPT Serno 4 Value
v_index = v_index + 1.
wafieldcatlog-fieldname = 'SERNR3'.
wafieldcatlog-tabname = 'IT_ALV'.
wafieldcatlog-seltext = 'Serial number'.
wafieldcatlog-reptext = 'Serial number'.
wafieldcatlog-hotspot = ' '.
wafieldcatlog-col_pos = v_index.
APPEND wafieldcatlog TO it_fieldcatalog.
CLEAR wafieldcatlog-reptext.
CLEAR wafieldcatlog-key.
*EQPT Serno 5 Value
v_index = v_index + 1.
wafieldcatlog-fieldname = 'SERNR4'.
wafieldcatlog-tabname = 'IT_ALV'.
wafieldcatlog-seltext = 'Serial number'.
wafieldcatlog-reptext = 'Serial number'.
wafieldcatlog-hotspot = ' '.
wafieldcatlog-col_pos = v_index.
APPEND wafieldcatlog TO it_fieldcatalog.
CLEAR wafieldcatlog-reptext.
CLEAR wafieldcatlog-key.
*EQPT Serno 6 Value
v_index = v_index + 1.
wafieldcatlog-fieldname = 'SERNR5'.
wafieldcatlog-tabname = 'IT_ALV'.
wafieldcatlog-seltext = 'Serial number'.
wafieldcatlog-reptext = 'Serial number'.
wafieldcatlog-hotspot = ' '.
wafieldcatlog-col_pos = v_index.
APPEND wafieldcatlog TO it_fieldcatalog.
CLEAR wafieldcatlog-reptext.
CLEAR wafieldcatlog-key.
*EQPT Serno 7 Value
v_index = v_index + 1.
wafieldcatlog-fieldname = 'SERNR6'.
wafieldcatlog-tabname = 'IT_ALV'.
wafieldcatlog-seltext = 'Serial number'.
wafieldcatlog-reptext = 'Serial number'.
wafieldcatlog-hotspot = ' '.
wafieldcatlog-col_pos = v_index.
APPEND wafieldcatlog TO it_fieldcatalog.
CLEAR wafieldcatlog-reptext.
CLEAR wafieldcatlog-key.
ENDFORM. " prepare_catalog
*& Module USER_COMMAND_0100 INPUT
text
MODULE user_command_0100 INPUT.
IF ok_code = 'EXIT'.
CALL METHOD grid1->free.
CALL METHOD cl_gui_cfw=>flush.
leave program .
LEAVE TO SCREEN 0.
ENDIF.
ENDMODULE. " USER_COMMAND_0100 INPUT
*& Form call_migo
text
--> p1 text
<-- p2 text
FORM call_migo .
CALL FUNCTION 'MIGO_DIALOG' "n547170
EXPORTING "n547170
i_action = 'A04' "n547170
i_refdoc = 'R02' "n547170
i_notree = 'X' "n547170
i_no_auth_check = ' ' "n547170
i_deadend = 'X' "n547170
i_skip_first_screen = 'X' "n547170
i_okcode = 'OK_GO' "n547170
i_mblnr = wa_alv-mblnr "n547170
i_mjahr = wa_alv-mjahr . "n547170
ENDFORM. " call_migo

Thanks,
K.Kiran

How to know when series items gets changed in the bubble series

Hi,
I want to trace when the data inside the series data provoder gets changed. how ?
Regards,
Arjun.

This works for me
<?xml version="1.0" encoding="utf-8"?>
<mx:Application xmlns:mx="http://www.adobe.com/2006/mxml" layout="absolute" creationComplete="init()">
     <mx:Script>
          <![CDATA[
               import mx.collections.ArrayCollection;
               import mx.events.CollectionEvent;
               [Bindable]
               public var expenses:ArrayCollection = new ArrayCollection([
                    {Month:"Jan", Profit:2000, Expenses:120, Amount:45},
                    {Month:"Feb", Profit:1000, Expenses:200, Amount:60},
                    {Month:"Mar", Profit:1500, Expenses:500, Amount:30}
               public var myArray:Array=[{Month:"Mar", Profit:1500, Expenses:500, Amount:30}];
               private function init():void{
                    expenses.addEventListener(CollectionEvent.COLLECTION_CHANGE,myFunction);
               private function myFunction(e:CollectionEvent):void{
                    trace("I was changed");
          ]]>
     </mx:Script>
     <mx:Button label="add something" click="expenses.addItem(myArray)" />
</mx:Application>

I have iWork on my new MacBookPro and it works fine. But I had the Beta iWorks in iCloud on my older desktop. How do I get the Beta iWorks off my iCloud because it is different (and better) when I use it on my MacBookPro?

I have iWork on my new MacBookPro and it works fine. But I had the Beta iWorks in iCloud on my older desktop. How do I get the Beta iWorks off my iCloud because it is different (and better) when I use it on my MacBookPro? Shouldn't the iCloud be the same as the MacBookPro iWorks

billjudy wrote:
Shouldn't the iCloud be the same as the MacBookPro iWorks
No, they are different apps. The beta one in icloud is for use by PC's as well as Mac's via a web browser and lets users collaborate on documents. It can't removed. Just ignore it if you have no use for it.

When trying to open iphoto I get the error message "You can't open the application iPhoto because it may be damaged or incomplete." How do I fix this and get my photo's back?

When trying to open iphoto I get the error message "You can't open the application iPhoto because it may be damaged or incomplete." How do I fix this and get my photo's back?

To re-install iPhoto
1. Put the iPhoto.app in the trash (Drag it from your Applications Folder to the trash)
2a: On 10.5: Go to HD/Library/Receipts and remove any pkg file there with iPhoto in the name.
2b: On 10.6: Those receipts may be found as follows: In the Finder use the Go menu and select Go To Folder. In the resulting window type
/var/db/receipts/
2c: on 10.7 they're at
/private/var/db/receipts
A Finder Window will open at that location and you can remove the iPhoto pkg files.
3. Re-install.
If you purchased an iLife Disk, then iPhoto is on it.
If iPhoto was installed on your Mac when you go it then it’s on the System Restore disks that came with your Mac. Insert the first one and opt to ‘Install Bundled Applications Only.
If you purchased it on the App Store you can find it in your Purchases List.

I have to reset factory settings but Apple ID is old email no longer used. I can't recall the password and when I went to answer security questions it told me my date of birth was wrong. How do i rest password but get it sent to my current email addr

I have to reset factory settings but Apple ID is old email no longer used. I can't recall the password and when I went to answer security questions it told me my date of birth was wrong. How do i rest password but get it sent to my current email address

Go to http://iforgot.apple.com to get help with your password.

How do I install latest version of iTunes when I keep getting an error message to go to Tools, Download only, then Install manually??

How do i install latest version of iTunes when I keep getting an error message to go to Tools, Download only, and install manually??

Hi Moerdesign,
Did you downloaded and installed Photoshop and Illustrator CS6 through Creative Cloud.
After uninstalled them, Creative Cloud saying applications are "Up to Date" when not installed.
If this is the case then please perform the steps given in the help document.
http://helpx.adobe.com/creative-cloud/kb/aam-lists-removed-apps-date.html
Please let me know if this is not the case.
Screenshot of the problem would be great help.
Regards,
Sumit Singh

I synced my ipad the other day... later when i went to check my photos they weren't there but they are on icloud. How do i acces them to get them back onto my ipad

I synced my ipad the other day... later when i went to check my photos (on my ipad2) they weren't there but they are on icloud. How do i acces them to get them back onto my ipad? i have projects and other materail that is extremely important!!!!!!!!
PLEASE HELP!!!!!!!!!!!!!!!!!!!!!11

Hey Ben,
If you backed up your photos on your computer, just sync back to your computer, and in iTunes, select Photos (with your device selected on the left side of iTunes window). Click to sync photos and select the photo album you want back on your device.
Good luck

How do I make the internal mic on my macbook air sustain better when recording on garage band? I have been recording an acoustic guitar and listening back, the mic seems to pick it up well naturally for 1 or 2 seconds then dramatically drop out.

How do I make the internal mic on my macbook air sustain better when recording on garage band? I have been recording an acoustic guitar and listening back, the mic seems to pick it up well naturally for 1 or 2 seconds then dramatically drop out.

I realised that you just need to go to System Preferences > Sound > Input > and uncheck 'Use ambient noise reduction'. mmm answered my own question.

When trying to get updates it says that I am not conntected and to check my network. How do I fix this?

When trying to get an update, a message reads that it cannot connect and to check the network setting. I can get the internet, so I dont know how the fix this.

Temporarily turn off the anti-virus and firewall software on your PC before attempting to get the update

How to send a mail to the user when a job gets canceled?

Hi experts,
                  I need to send a mail when a job gets canceled to the user.I know the FM for sending mail and i can find if a job is canceled from tbtco,but i want to know how to send the mail from the same program ,once it got canceled ?
thanks in advance,
helpful answers will be awarded with points
regards,
ashwin

Hi Ashwin
Use the below peace of code:
REPORT ZBCJOBMONITOR .
TABLES: SOMLREC90,
        TBTCO.
DATA: MAILDATA   LIKE SODOCCHGI1.
DATA: MAILTXT    LIKE SOLISTI1 OCCURS 10 WITH HEADER LINE.
DATA: MAILREC    LIKE SOMLREC90 OCCURS 0 WITH HEADER LINE.
DATA: I_TBTCO    LIKE TBTCO OCCURS 0 WITH HEADER LINE.
SELECTION-SCREEN BEGIN OF BLOCK B1 WITH FRAME TITLE TEXT-001 .
SELECT-OPTIONS: S_JOB FOR TBTCO-JOBNAME.
SELECT-OPTIONS: S_JOBC FOR TBTCO-JOBClass.
SELECT-OPTIONS: S_REC FOR SOMLREC90-RECEIVER.
SELECTION-SCREEN END OF BLOCK B1.
START-OF-SELECTION.
CLEAR:    MAILDATA, MAILTXT, MAILREC, I_TBTCO.
REFRESH: MAILTXT, MAILREC, I_TBTCO.
PERFORM GET_ABENDED_JOBS.
PERFORM BUILD_RECEIVERS.
LOOP AT I_TBTCO.
    PERFORM BUILD_TEXT_MESSAGE.
    PERFORM SEND_MAIL_NODIALOG..
ENDLOOP.
     Form BUILD_TEXT_MESSAGE
FORM GET_ABENDED_JOBS.
SELECT * FROM TBTCO
          INTO CORRESPONDING FIELDS OF TABLE I_TBTCO
                     WHERE JOBNAME IN S_JOB
                       AND STATUS = 'A'
                       AND JOBCLASS IN S_JOBC
                       AND SDLSTRTDT = SY-DATUM.
ENDFORM.
     Form BUILD_TEXT_MESSAGE
FORM BUILD_TEXT_MESSAGE.
DATA: DATE(10) TYPE C.
DATA: TIME(10) TYPE C.
MAILDATA-OBJ_NAME = 'MONITOR'.
MAILDATA-OBJ_DESCR = 'Batch Job Monitor'.
MAILDATA-OBJ_LANGU = SY-LANGU.
CONCATENATE 'Job Name:' I_TBTCO-JOBNAME
              INTO MAILTXT-LINE SEPARATED BY SPACE.
APPEND MAILTXT.
PERFORM FORMAT_DATE USING I_TBTCO-SDLSTRTDT
                            DATE.
CONCATENATE I_TBTCO-SDLSTRTTM+0(2) ':'
              I_TBTCO-SDLSTRTTM+2(2) ':'
              I_TBTCO-SDLSTRTTM+4(2)
                 INTO TIME.
CONCATENATE 'Start Date/Time:' DATE TIME
            INTO MAILTXT-LINE SEPARATED BY SPACE.
APPEND MAILTXT.
CONCATENATE 'Job Class:' I_TBTCO-JOBCLASS
            INTO MAILTXT-LINE SEPARATED BY SPACE.
APPEND MAILTXT.
MAILTXT-LINE = 'Job has terminated abnormally'.
APPEND MAILTXT.
ENDFORM.
     Form BUILD_RECEIVERS
FORM BUILD_RECEIVERS.
LOOP AT S_REC.
    CLEAR MAILREC.
    MAILREC-RECEIVER = S_REC-LOW.
    MAILREC-REC_TYPE = 'U'.
    APPEND MAILREC.
ENDLOOP.
ENDFORM.
     Form SEND_MAIL_NODIALOG
FORM SEND_MAIL_NODIALOG.
CALL FUNCTION 'SO_NEW_DOCUMENT_SEND_API1'
       EXPORTING
            DOCUMENT_DATA              = MAILDATA
            DOCUMENT_TYPE              = 'RAW'
            PUT_IN_OUTBOX              = 'X'
       TABLES
            OBJECT_HEADER              = MAILTXT
            OBJECT_CONTENT             = MAILTXT
            RECEIVERS                  = MAILREC
       EXCEPTIONS
            TOO_MANY_RECEIVERS         = 1
            DOCUMENT_NOT_SENT          = 2
            DOCUMENT_TYPE_NOT_EXIST    = 3
            OPERATION_NO_AUTHORIZATION = 4
            PARAMETER_ERROR            = 5
            X_ERROR                    = 6
            ENQUEUE_ERROR              = 7
            OTHERS                     = 8.
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
        WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
ENDFORM.
     Form FORMAT_DATE
FORM FORMAT_DATE USING IN
                       OUT.
CALL FUNCTION 'CONVERT_DATE_TO_EXTERNAL'
       EXPORTING
            DATE_INTERNAL            = IN
       IMPORTING
            DATE_EXTERNAL            = OUT
       EXCEPTIONS
            DATE_INTERNAL_IS_INVALID = 1
            OTHERS                   = 2.
ENDFORM.
Regards,
Sree

How and when do applications get stored on iCloud? I play a game called injustice and it saves to iCloud but seems to do it randomly. I often lose the most recent game and it backs up to an old one. Can i do it manually? is there a way to check?

when do games get saved? Can i do it manually? I often lose most recent game if i restore it from iCloud

You'd need to ask the developer. How and when individual apps use iCloud is up to the developer of that particular app,

How to ignore a variable defined in a query when the query gets executed

Hi SAP guru, I am creating a query, which has a user input variable, say A, and a replacement path variable, say B, Bu2019s value is determined by A and the whole purpose of A is letting user entering an initial value and A must be ignored when the query gets executed. How can I achieve this in query designer?
Thanks

Hi, thanks for the reply. Actually this is not my problem. My problem is the query should be filtered by a variable, say B, but B is not allowed to be entered directly by user (i.e. B could be a replacement path variable or user exit type). So B has to be derived from another user input variable, say A. However if I defined A in the query, A is by default used as one of the filters, which is not desirable because A is a subset of B in my case and should be ignored.
Is there options (settings) that allow the query ignore a specified variable (A) ? If not is there other ways to get around this?
Thanks
MichScott

How to know when the PRICE AFTER DISCOUNT changed and get the value

Hi,
Everything I do to see if a value changed in the grid works except for PRICE AFTER DISCOUNT
which seems to be inaccessible.
Any idea how to know when exactly this value changed and do actions accordinly ?
Also I always get 0.00 if I try to get the value of it
This works to get in the condition of a vlaue changing but I always get 0.00 as the value of the column
if (pVal.ItemUID == "38" && pVal.ColUID == COL_DISCOUNT.ToString() && pVal.EventType == BoEventTypes.et_VALIDATE && pVal.ItemChanged == true && pVal.ActionSuccess == true)
    try
        SAPbouiCOM.Matrix Matrix = (SAPbouiCOM.Matrix)SBO_Application.Forms.ActiveForm.Items.Item("38").Specific;
        SAPbouiCOM.EditText Editor = (SAPbouiCOM.EditText)Matrix.Columns.Item(COL_DISCOUNT).Cells.Item(pVal.Row).Specific;
        SBO_Application.MessageBox("Discount changed for : " + Editor.Value + "...", 1, "Ok", "", "");
    catch (Exception ex)
        SBO_Application.MessageBox(ex.Message, 1, "Ok", "", "");
And this do not even get into the condition even tought I SEE the column PRICE AFTER DISCOUNT:
if (pVal.ItemUID == "38" && pVal.ColUID == COL_PRICEAFTERDISCOUNT.ToString() && pVal.EventType == BoEventTypes.et_VALIDATE && pVal.ItemChanged == true && pVal.ActionSuccess == true)
    try
        SAPbouiCOM.Matrix Matrix = (SAPbouiCOM.Matrix)SBO_Application.Forms.ActiveForm.Items.Item("38").Specific;
        SAPbouiCOM.EditText Editor = (SAPbouiCOM.EditText)Matrix.Columns.Item(COL_PRICEAFTERDISCOUNT).Cells.Item(pVal.Row).Specific;
        SBO_Application.MessageBox("Price after discount changed for : " + Editor.Value + "...", 1, "Ok", "", "");
     catch (Exception ex)
         SBO_Application.MessageBox(ex.Message, 1, "Ok", "", "");

just idea, maybe it will works
Create one udf in row level and set there FS based on changes on price after discount and fill value what is in price after discount. Then the validation make on this field instead of standard SAP field.

How (or better when) do I get Anna?

Similar Messages

Maybe you are looking for