How Session/token/Header is passed to Application from OAM ?

Hi Experts,
I have understood that IAM will have obssocookie (10gwebgate), OAM_RMOETE_HEADER (OAM-identity assertor), any thing like session as well ?
Question is
Where is a mapping of enterprise Application session and OAM session ? in other words where we do configuration/assignment of session?
Assumption : Enterprise application is deployed on one weblogic. (application like ADF,WCP,EJB)
IAM is on another weblogic.
Help appreciated

For your qustn: How Session/token/Header is passed to Application from OAM?
1. The appln contain the access code receives user req. for resource
2. AG constructs ObResourceRequest structure
3. The AG constructs ObAuthentication structure (For protected resources)
4. Access server responds and AG constructs ObUserSession struc
5. If credentials true then AG creates a Session Token for the user (this Tokes has usr identity, name of trget requested etc,.)
Thnx
Vishwa

Similar Messages

  • CS 5.5 How to insert header into pre-fab design --- from a sophomoric neophyte

    CS 5.5 How to insert header into pre-fab design --- from a sophomoric neophyte
    Essentially, I have one basic HTML class from several years ago, and a beginning DW class in 2008.
    i am trying to figure out if I can insert a header or otherwise edit the top of this pre-fab DW site.
    http://www.doyle.thibert.com/neos/index.html
    Thanks in advance for your sage advice.
    Doyle

    Learn all you can about HTML and CSS first.  DW expects you to know coding fundamentals. 
    HTML, CSS & Web Design Theory Tutorials -
    http://w3schools.com/
    http://www.csstutorial.net/
    http://phrogz.net/css/HowToDevelopWithCSS.html
    http://webdesign.tutsplus.com/sessions/web-design-theory/
    Then work through David Powers' 5-part tutorial
    Creating  your first web site in DW -
    http://www.adobe.com/devnet/dreamweaver/articles/first_website_pt1.html
    Good luck!
    ❄  ☃  ❄Nancy O.

  • How do I delete or remove an application from my iPad.

    How do I delete or remove an application from my iPad.

    Press and hold any of the apps and after a couple of seconds or so they should start to shake. Then press the 'x' in the left corner to delete the ones that you don't want, and when you've finished deleting press the home button so as to stop the shaking. You cannot delete any of the Apple built-in apps e.g. iPod, App Store, Game entre etc. If you don't get the 'x' on any of the apps that you've downloaded then check that Settings > General > Restrictions > Deleting Apps isn't set 'off'
    If the app is on your computer's iTunes then you should probably also either delete it from there as well, or un-tick it from your iPad's sync list when you next connect it, otherwise it might get put back on the iPad. As long as the app remains in the app store you can always re-download it for free in the future (http://support.apple.com/kb/HT2519).

  • How do I prevent the Window Office applications from launching when my iMAC boots or recovers from sleep? I've tried System Preferences however the Office programs are not listed?

    How do I prevent the Window Office applications from launching when my iMAC boots or recovers from sleep? I've tried System Preferences however the Office programs are not listed?

    lunagirl wrote:
    The first 3 apps listed are not installed because I have not run the activation assistant for the Office trial that came with the T61.  Add/Remove programs has only these pre-installed apps:
    Microsoft Office 2003 Web Components
    Microsoft Office 2007 Primary Interop Assemblies
    Microsoft Office Small Business Connectivity Components
    MS SQL Server 2005
    MS SQL Server Native Client
    MS SQL Server Setup Support Files
    MS SQL Server VSS Writer
    Is the activation assistant one of them?
    No, AFAIK should be listed as Microsoft Office Suite Activation Assistant
    Rgds,
    Ahti

  • How to manually completely remove a J2EE application from the server?

    Hello,
    I have created and deployed a certain test J2EE application.
    After I finished with it I wanted to remove it, yet I cannot do it: Any removal attempt, either by the SDM or Admin Tool, encounters exceptions and errors I cannot handle. I tried restarting the server, stopping the application yet nothing works. on telnet the application has always STOPPING ststus...
    Desperately, I have decided to manually remove this application from the server yet I don't know the steps.
    Can someone please give me a step-by-step guidance on how to completely remove this application from the server, so it won't appear anyome both at the SDM and at the deploy service of the WAS?
    Thank you in advance,
    Roy

    Hi Peter,
    I've reproduced the problem and created a thread dump. I believe these lines are the important ones:
    "SAPEngine_Application_Thread[impl:3]_10" prio=5 tid=0x080cc9d8 nid=0x18e0 in Object.wait() [8a8f000..8a8fdb8]
         at java.lang.Object.wait(Native Method)
         - waiting on <0x14450d88> (a java.lang.Object)
         at java.lang.Object.wait(Object.java:429)
         at com.sap.engine.services.ejb.EJBAdmin.destroyContainers(EJBAdmin.java:1145)
         - locked <0x14450d88> (a java.lang.Object)
         at com.sap.engine.services.ejb.EJBAdmin.commitStop(EJBAdmin.java:2529)
         at com.sap.engine.services.deploy.server.application.StopTransaction.commonCommitFinished(StopTransaction.java:262)
         at com.sap.engine.services.deploy.server.application.StopTransaction.commitCommon(StopTransaction.java:305)
         at com.sap.engine.services.deploy.server.application.StopTransaction.commit(StopTransaction.java:291)
         at com.sap.engine.services.deploy.server.application.ApplicationTransaction.makeAllPhasesOnOneServer(ApplicationTransaction.java:310)
         at com.sap.engine.services.deploy.server.application.ParallelAdapter.makeAllPhasesImpl(ParallelAdapter.java:327)
         at com.sap.engine.services.deploy.server.application.ParallelAdapter.runInTheSameThread(ParallelAdapter.java:111)
         at com.sap.engine.services.deploy.server.application.ParallelAdapter.makeAllPhasesAndWait(ParallelAdapter.java:230)
         at com.sap.engine.services.deploy.server.application.RemoveTransaction.begin(RemoveTransaction.java:133)
         at com.sap.engine.services.deploy.server.application.ApplicationTransaction.makeAllPhasesOnOneServer(ApplicationTransaction.java:292)
         at com.sap.engine.services.deploy.server.application.ApplicationTransaction.makeAllPhases(ApplicationTransaction.java:326)
         at com.sap.engine.services.deploy.server.DeployServiceImpl.makeGlobalTransaction(DeployServiceImpl.java:3139)
         at com.sap.engine.services.deploy.server.DeployServiceImpl.remove(DeployServiceImpl.java:903)
         at com.sap.engine.services.deploy.server.DeployServiceImpl.remove(DeployServiceImpl.java:5056)
         at com.sap.engine.services.deploy.server.DeployServiceImplp4_Skel.dispatch(DeployServiceImplp4_Skel.java:885)
         at com.sap.engine.services.rmi_p4.DispatchImpl._runInternal(DispatchImpl.java:304)
         at com.sap.engine.services.rmi_p4.DispatchImpl._run(DispatchImpl.java:193)
         at com.sap.engine.services.rmi_p4.server.P4SessionProcessor.request(P4SessionProcessor.java:122)
         at com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:33)
         at com.sap.engine.core.cluster.impl6.session.MessageRunner.run(MessageRunner.java:41)
         at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)
         at java.security.AccessController.doPrivileged(Native Method)
         at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:100)
         at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:170)
    Could you please advise how to proceed from here?
    Thank you in advance,
    Roy

  • How do I start and suspend Java Application from say C++ program

    I want to start a Java application via C++ and on some condition i want to suspend the same program not terminate , but suspend

    Have you tried running the virtual machine from your C++ application ? You can start Java applications from your C++ application using JNI after starting the Virtual machine from within your C++ application. According to the Java documentation you can even now stop the virtual machine from within your C++ program.
    I haven't looked at the 'suspend' detail but I suppose it will not be a problem to call a method via JNI to set a flag to suspend a thread etc.
    There is a tutorial: 'Invoking the Java Virtual Machine' at the following URL: http://java.sun.com/docs/books/tutorial/native1.1/invoking/invo.html.
    This example seems to work only for version1.1 of the JDK. For JDK1.3, version 1.2, (I am not so sure whether I fully understand Sun's version numbers for Java yet) there is some updates on the JNI for starting the VM from C++. This article is called 'JNI Enhancements'. The URL for this article is:
    http://java.sun.com/j2se/1.3.0/docs/guide/jni/jni-12.html
    You have to set version to: JNI_VERSION_1_2
    There is only one problem. I get an error when calling JNI_CreateJavaVM from C++. I could not find any documentation that indicates how you can go about diagnosing what is causing the problem. Normally in Visual C++ you can just get the probable cause by inspecting GetLastError() or the function itself can return helpful diagnostic (error) codes.
    If you manage to start the VM correctly from within Visual C++ please let me know. My email address is [email protected]
    good luck
    Henko

  • How to deal with security when migrating application from weblogic 5.1 to weblogic 6.1?

    Dear All,
    I have one statement int weblogic 5.1 weblogic.propertis as follow,
    weblogic.security.realmClass=com.tbcn.security.realm.TestRealm
    but after converting to weblogic 6.1 there are no corresponding statement in
    the file config.xml. And when i start the new application, error occured.
    what should I do?
    The error message is:
    <2001/8/27 am 11:33:42> <Notice> <Management> <Loading configuration file
    .\config\tbcn\config.xml
    <2001/8/27 am 11:33:49> <Emergency> <Server> <Unable to initialize the
    server: 'Fatal initializatio
    Throwable: java.lang.NullPointerException
    java.lang.NullPointerException
    at
    weblogic.security.SecurityService.initializeRealm(SecurityService.java:261)
    at
    weblogic.security.SecurityService.initialize(SecurityService.java:115)
    at weblogic.t3.srvr.T3Srvr.initialize(T3Srvr.java:385)
    at weblogic.t3.srvr.T3Srvr.run(T3Srvr.java:197)
    at weblogic.Server.main(Server.java:35)
    '>
    The WebLogic Server did not start up properly.
    Exception raised: java.lang.NullPointerException
    java.lang.NullPointerException
    at
    weblogic.security.SecurityService.initializeRealm(SecurityService.java:261)
    at
    weblogic.security.SecurityService.initialize(SecurityService.java:115)
    at weblogic.t3.srvr.T3Srvr.initialize(T3Srvr.java:385)
    at weblogic.t3.srvr.T3Srvr.run(T3Srvr.java:197)
    at weblogic.Server.main(Server.java:35)
    Reason: Fatal initialization exception

    Dear Satya,
    My weblogic propertis file as follow,
    # CORE PROPERTIES
    # You should set these before you start the WebLogic Server the first time.
    # If you need more instructions on individual properties in this
    # section, check the same section in the Optional Properties, where
    # we've left the long explanations. Or, better yet, go to our
    # website and read all about properties, at:
    # http://www.weblogic.com/docs51/admindocs/properties.html
    # CORE SYSTEM PROPERTIES
    # TCP/IP port number at which the WebLogic Server listens for connections
    weblogic.system.listenPort=7001
    # CORE SECURITY-RELATED PROPERTIES
    # Read important information about security at:
    # http://www.weblogic.com/docs51/admindocs/properties.html
    # REQUIRED: The system password MUST be set in order to start the
    # WebLogic Server. This password is case-sensitive, at least 8 characters.
    # The username for the privileged user is ALWAYS "system".
    # This username and password also includes httpd access (see
    # HTTPD properties below).
    weblogic.password.system=12345678
    # RECOMMEND Set to 'everyone' if HTTPD is enabled
    weblogic.allow.execute.weblogic.servlet=everyone
    # Set individual ACLs to restrict access to HTTP-related resources,
    # such as the Administration servlets.
    # To make your own servlets generally available, follow this
    # pattern (provide a weblogic.allow.execute) for your packages and
    # set ACLs as appropriate.
    # CORE SECURITY-RELATED PROPERTIES FOR SSL
    # Read important information about SSL at:
    # http://www.weblogic.com/docs51/classdocs/API_secure.html
    # Enable SSL
    # (default if property not defined is false)
    weblogic.security.ssl.enable=true
    # SSL listen port
    weblogic.system.SSLListenPort=7002
    # Servlets for SSL
    # Authentication servlet for creating tokens for applets
    weblogic.httpd.register.authenticated=weblogic.t3.srvr.ClientAuthenticationS
    ervlet
    # Limits number of unclaimed stored tokens
    weblogic.security.certificateCacheSize=3
    # Capture CA root of client servlet
    weblogic.httpd.register.AdminCaptureRootCA=admin.AdminCaptureRootCA
    # Certificates for SSL
    # Name of acceptable CA roots
    # For client authentication change value to a valid .pem file
    #weblogic.security.clientRootCA=SecureServerCA.pem
    # Server certificates for SSL
    weblogic.security.certificate.server=democert.pem
    weblogic.security.key.server=demokey.pem
    weblogic.security.certificate.authority=ca.pem
    # registration for certificate generator servlet
    weblogic.httpd.register.Certificate=utils.certificate
    weblogic.allow.execute.weblogic.servlet.Certificate=system
    # CORE HTTPD ADMINISTRATIVE PROPERTIES
    # True permits the HTTPD to run (default)
    # Uncomment this property to disable HTTPD
    #weblogic.httpd.enable=false
    # If authentication is required, add username/password for each user
    # who will be included in an ACL, as in this commented-out example:
    #weblogic.password.peter=#8gjsL4*
    # SYSTEM PROPERTIES
    # System properties in this section are set to system defaults
    # Performance pack. The shared library must be accessible from your
    # PATH (NT) or from your shared library path (UNIX; the name of the
    # variable varies: LD_LIBRARY_PATH, SHLIB_PATH, etc.)
    weblogic.system.nativeIO.enable=true
    # Outputs logging information to the console as well as to the log file
    weblogic.system.enableConsole=true
    # Sets the directory or URL for the WebLogic Admin help pages
    # The help pages are shipped in the "docs/adminhelp" directory, in the
    # default document root in public_html
    weblogic.system.helpPageURL=/weblogic/myserver/public_html/docs51/adminhelp/
    # If you prefer to access the most recent help pages, you can do so online
    # by commenting out the previous property and uncommenting this one:
    #weblogic.system.helpPageURL=http://www.weblogic.com/docs51/adminhelp/
    # Properties for tuning the server's performance
    # Number of WebLogic Server execute threads.
    weblogic.system.executeThreadCount=15
    # Other optional system properties
    # Limits size of weblogic.log (in K) and versions old log
    weblogic.system.maxLogFileSize=1024
    # Adjust minimum length of password
    weblogic.system.minPasswordLen=8
    # UNIX only: If running on port 80 on UNIX, enable the setUID program
    #weblogic.system.enableSetUID=false
    # UNIX only: Unprivileged user to setUID to after starting up
    # WebLogic Server on port 80
    #weblogic.system.nonPrivUser=nobody
    # CLUSTER-SPECIFIC PROPERTIES
    # Cluster-specific properties in this section are set to system defaults.
    # CLUSTER USERS: Note that ALL Cluster-specific properties should be set
    # in the per-cluster properties file ONLY.
    # Time-to-live (number of hops) for the cluster's multicast messages
    # (default 1, range 1-255).
    #weblogic.cluster.multicastTTL=1
    # Sets the load-balancing algorithm to be used between
    # replicated services if none is specified. If not specified,
    # round-robin is used.
    #weblogic.cluster.defaultLoadAlgorithm=round-robin
    # SERVER-SPECIFIC CLUSTER PROPERTIES
    # Cluster-related properties in this section are set to system defaults.
    # CLUSTER USERS: Note that these server-specific cluster-related properties
    # should be set in the per-server properties file ONLY.
    # Sets the weight of the individual server for the weight-based
    load-balancing.
    # Range is 0 - 100.
    # Larger numbers increase the amount of traffic routed to this server.
    #weblogic.system.weight=100
    # SYSTEM STARTUP FILES - Examples
    # CLUSTER USERS: Note that ONLY startup registrations for pinned RMI
    # objects should be registered in the per-server properties file.
    # All other startup classes should be registered in the per-cluster
    # properties file.
    # For more info on writing and using startup file, see the
    # Developers Guide "Writing a WebLogic Client application," at
    # http://www.weblogic.com/docs51/classdocs/API_t3.html
    # Register a startup class by giving it a virtual name and
    # supplying its full pathname.
    #weblogic.system.startupClass.[virtual_name]=[full_pathname]
    # Add arguments for the startup class
    #weblogic.system.startupArgs.[virtual_name]={argname]=[argvalue]
    # This example shows the entry for examples/t3client/StartupQuery.java
    #weblogic.system.startupClass.doquery=examples.t3client.StartupQuery
    #weblogic.system.startupArgs.doquery=\
    # query=select * from emp,\
    # db=jdbc:weblogic:pool:demoPool
    # SYSTEM SHUTDOWN FILES - Examples
    # For more info on writing and using shutdown file, see the
    # Developers Guide "Writing a WebLogic Client application," at
    # http://www.weblogic.com/docs51/classdocs/API_t3.html
    # Register a shutdown class by giving it a virtual name and
    # supplying its full pathname.
    #weblogic.system.shutdownClass.[virtual_name]=[full_pathname]
    # Add arguments for the shutdown class
    #weblogic.system.shutdownArgs.[virtualName]={argname]=[argvalue]
    # This example shows the entry for examples/t3client/ShutdownTest.java
    #weblogic.system.shutdownClass.ShutdownTest=examples.t3client.ShutdownTest
    #weblogic.system.shutdownArgs.ShutdownTest=\
    # outfile=c:/temp/shutdown.log
    # SECURITY-RELATED PROPERTIES FOR WORKSPACES
    # For backward compatibility, the following entries disable Access
    # Control on Workspaces
    weblogic.allow.read.weblogic.workspace=everyone
    weblogic.allow.write.weblogic.workspace=everyone
    # JOLT FOR WEBLOGIC PROPERTIES
    # These properties configure a BEA Jolt connection pool for use with
    # the simpapp and bankapp examples, and register a servlet for use with
    # with the simpapp example. The default server address provided here
    # points to a public TUXEDO server that is hosted by BEA for use with
    # this example.
    # Servlet registration for simpapp example:
    #weblogic.httpd.register.simpapp=examples.jolt.servlet.simpapp.SimpAppServle
    t
    # Pool creation and cleanup
    # note this example is set up to work with the public
    # demo TUXEDO server available from BEA's website:
    #weblogic.system.startupClass.demojoltpoolStart=\
    # bea.jolt.pool.servlet.weblogic.PoolManagerStartUp
    #weblogic.system.startupArgs.demojoltpoolStart=\
    # poolname=demojoltpool,\
    # appaddrlist=//beademo1.beasys.com:8000,\
    # failoverlist=//beademo1.beasys.com:8000,\
    # minpoolsize=1,\
    # maxpoolsize=3
    #weblogic.system.shutdownClass.demojoltpoolStop=\
    # bea.jolt.pool.servlet.weblogic.PoolManagerShutDown
    #weblogic.system.shutdownArgs.demojoltpoolStop=\
    # poolname=demojoltpool
    # WEBLOGIC ENTERPRISE CONNECTIVITY PROPERTIES
    # The registrations enable a BEA IIOP connection pool and
    # register servlets for use with the simpapp and university examples.
    # Configure for your environment and uncomment to use.
    # Uncommenting these properties requires WebLogic Enterprise Connectivity
    # and an operating WebLogic Enterprise Server.
    # Servlet registration for simpapp servlet example
    #weblogic.httpd.register.SimpappServlet=\
    # examples.wlec.servlets.simpapp.SimpappServlet
    #weblogic.allow.execute.weblogic.servlet.SimpappServlet=everyone
    # Servlet registration for simpapp EJB example
    # (You'll need to add the wlec_ejb_simpapp.jar to the
    # weblogic.ejb.deploy property in this file.)
    #weblogic.httpd.register.ejbSimpappServlet=\
    # examples.wlec.ejb.simpapp.ejbSimpappServlet
    #weblogic.allow.execute.weblogic.servlet.ejbSimpappServlet=everyone
    # Pool creation and cleanup for the simpapp example
    #weblogic.CORBA.connectionPool.simplepool=\
    # appaddrlist=//wlehost:2468,\
    # failoverlist=//wlehost:2468,\
    # minpoolsize=2,\
    # maxpoolsize=3,\
    # username=wleuser,\
    # userrole=developer,\
    # domainname=simpapp
    # Servlet registration for university Servlet example:
    #weblogic.httpd.register.UniversityServlet=\
    # examples.wlec.servlets.university.UniversityServlet
    #weblogic.allow.execute.weblogic.servlet.UniversityServlet=everyone
    # Pool creation and cleanup for the University example:
    #weblogic.CORBA.connectionPool.Univpool=\
    # appaddrlist=//wlehost:2498,\
    # failoverlist=//wlehost:2498,\
    # minpoolsize=2,\
    # maxpoolsize=3,\
    # username=wleuser,\
    # userrole=developer,\
    # apppassword=wlepassword,\
    # domainname=university
    # WEBLOGIC FILE PROPERTIES
    # Maps a volume name to a path, for client file read/write
    #weblogic.io.fileSystem.[volumeName]=[fullPathName]
    # WEBLOGIC JMS DEMO PROPERTIES
    # CLUSTER USERS: Note that ALL JMS deployment should be done in the
    # per-cluster properties file ONLY.
    # You set up a JDBC connection pool if you want persistent messages
    # (including durable subscriptions). To use JMS and EJBs in the same
    # transaction, both must use the same JDBC connection pool. Uncomment
    # the following property to use the default JDBC connection pool
    # 'demo', which is defined in the Demo connection pool section of this file.
    #weblogic.jms.connectionPool=demoPool
    # The JMS Webshare example demonstrates how the ClientID for a
    # durable subscriber is configured in the connection factory:
    #weblogic.jms.topic.webshareTopic=jms.topic.webshareTopic
    #weblogic.jms.connectionFactoryName.webshare=jms.connection.webshareFactory
    #weblogic.jms.connectionFactoryArgs.webshare=ClientID=webshareUser
    #weblogic.httpd.register.webshare=examples.jms.webshare.WebshareServlet
    # The JMS trader example shows how to use JMS with an EJB. In addition
    # to uncommenting the following properties, you must also set up and
    # deploy the EJB example examples.ejb.basic.statelessSession.Trader in
    # ejb_basic_statelessSession.jar to try out this JMS example:
    #weblogic.jms.topic.exampleTopic=javax.jms.exampleTopic
    #weblogic.jms.connectionFactoryName.trader=jms.connection.traderFactory
    #weblogic.jms.connectionFactoryArgs.trader=ClientID=traderReceive
    #weblogic.httpd.register.jmstrader=examples.jms.trader.TraderServlet
    # Registers the underlying servlet
    #weblogic.httpd.register.jmssender=examples.jms.sender.SenderServlet
    # These properties are used with the ServerReceive JMS example,
    # which demonstrates how to establish a JMS message consumer
    # in a startup class:
    #weblogic.system.startupClass.serverReceive=\
    # examples.jms.startup.ServerReceive
    #weblogic.system.startupArgs.serverReceive=\
    # connectionFactory=javax.jms.TopicConnectionFactory,\
    # topic=javax.jms.exampleTopic
    # These properties are used with the PoolReceive JMS example,
    # which demonstrates how to establish a pool of JMS message consumers
    # in a startup class:
    #weblogic.system.startupClass.poolReceive=\
    # examples.jms.startup.PoolReceive
    #weblogic.system.startupArgs.poolReceive=\
    # connectionFactory=javax.jms.TopicConnectionFactory,\
    # topic=javax.jms.exampleTopic
    #weblogic.allow.create.weblogic.jms.ServerSessionPool=everyone
    # WEBLOGIC RMI DEMO PROPERTIES
    # CLUSTER USERS: Note that pinned RMI objects should be registered
    # in the per-server properties file ONLY. All other RMI startup
    # classes should be registered in the per-cluster properties file.
    # Remote classes registered at startup after the pattern:
    #weblogic.system.startupClass.[virtualName]=[fullPackageName]
    # These examples can be compiled to see RMI in action. Uncomment to use:
    #weblogic.system.startupClass.hello=examples.rmi.hello.HelloImpl
    #weblogic.system.startupClass.multihello=examples.rmi.multihello.HelloImpl
    #weblogic.system.startupClass.stock=examples.rmi.stock.StockServer
    # WEBLOGIC EJB DEMO PROPERTIES
    # CLUSTER USERS: Note that ALL EJB deployment should be done in the
    # per-cluster properties file ONLY.
    # See WebLogic Demo Connection Pool below for a connection pool
    # to use with these examples.
    # Deploys EJBeans. Uncomment the appropriate lines below and
    # modify DBMS-related info and paths to match your particular installation:
    # TBCN EJB PROPERTIES
    weblogic.ejb.deploy=\
    C:/weblogic/myserver/AccountSB.jar, \
    C:/weblogic/myserver/AddressEntryDet.jar, \
    C:/weblogic/myserver/AddressEntry.jar, \
    C:/weblogic/myserver/Affiliate.jar, \
    C:/weblogic/myserver/ContactPerson.jar, \
    C:/weblogic/myserver/ContactSB.jar, \
    C:/weblogic/myserver/Factory.jar, \
    C:/weblogic/myserver/FactorySups.jar, \
    c:/weblogic/myserver/LoginUsers.jar, \
    c:/weblogic/myserver/Member.jar, \
    c:/weblogic/myserver/MemberQuotaUsage.jar,\
    c:/weblogic/myserver/MemberToCategory.jar,\
    c:/weblogic/myserver/Organization.jar, \
    c:/weblogic/myserver/Person.jar, \
    c:/weblogic/myserver/QuotaType.jar,\
    c:/weblogic/myserver/Registration.jar, \
    c:/weblogic/myserver/TempAccounts.jar, \
    c:/weblogic/myserver/TempDomain.jar, \
    c:/weblogic/myserver/UserAccount.jar, \
    c:/weblogic/myserver/UserRole.jar, \
    c:/weblogic/myserver/BuyerProducts.jar, \
    c:/weblogic/myserver/Catalog.jar, \
    c:/weblogic/myserver/Categories.jar, \
    c:/weblogic/myserver/CategoryToCategory.jar, \
    c:/weblogic/myserver/CountryToCategory.jar, \
    c:/weblogic/myserver/InvitedMember.jar, \
    c:/weblogic/myserver/ProductOrigin.jar, \
    c:/weblogic/myserver/ProductOtherFee.jar,\
    c:/weblogic/myserver/ProductSups.jar, \
    c:/weblogic/myserver/Products.jar,\
    c:/weblogic/myserver/ProductToCategory.jar, \
    c:/weblogic/myserver/SecondaryQcEntry.jar, \
    c:/weblogic/myserver/CodeClass.jar,\
    c:/weblogic/myserver/ConfirmationSB.jar, \
    c:/weblogic/myserver/PurchasedPackage.jar,\
    c:/weblogic/myserver/RejectReasonCode.jar, \
    c:/weblogic/myserver/ServiceOrder.jar,\
    c:/weblogic/myserver/ServiceOrderLog.jar,\
    c:/weblogic/myserver/ServiceOrderState.jar,\
    c:/weblogic/myserver/ServiceOrderType.jar,\
    c:/weblogic/myserver/ServicePackageDetails.jar, \
    c:/weblogic/myserver/ServicePackage.jar, \
    c:/weblogic/myserver/ServicePayment.jar, \
    c:/weblogic/myserver/ServiceReqSB.jar, \
    c:/weblogic/myserver/TAM.jar, \
    c:/weblogic/myserver/SubscriptionEB.jar, \
    c:/weblogic/myserver/PostingCategoryEB.jar, \
    c:/weblogic/myserver/PostingBrowsedEB.jar, \
    c:/weblogic/myserver/PostingInfoEB.jar, \
    c:/weblogic/myserver/TransactionLogEB.jar, \
    c:/weblogic/myserver/PostingSB.jar
    #weblogic.ejb.deploy=\
    # d:/weblogic/myserver/ejb_basic_beanManaged.jar, \
    # d:/weblogic/myserver/ejb_basic_containerManaged.jar, \
    # d:/weblogic/myserver/ejb_basic_statefulSession.jar, \
    # d:/weblogic/myserver/ejb_basic_statelessSession.jar, \
    # d:/weblogic/myserver/ejb_extensions_finderEnumeration.jar, \
    # d:/weblogic/myserver/ejb_extensions_readMostly.jar, \
    # d:/weblogic/myserver/ejb_subclass.jar, \
    # d:/weblogic/myserver/jolt_ejb_bankapp.jar
    # Servlet used by the EJB basic beanManaged example
    # Uncomment to use:
    weblogic.httpd.register.beanManaged=\
    examples.ejb.basic.beanManaged.Servlet
    # Add a list of users (set the password with
    weblogic.password.[username]=XXX)
    # to set an ACL for this servlet:
    #weblogic.allow.execute.weblogic.servlet.beanManaged=user1,user2,etc
    #weblogic.password.user1=user1Password
    #weblogic.password.user2=user2Password
    # WEBLOGIC XML DEMO PROPERTIES
    # These properties are required to run the XML examples.
    # Uncomment to use.
    # CLUSTER USERS: Note that ALL servlets should be set up
    # in the per-cluster properties file ONLY.
    #weblogic.httpd.register.StockServlet=examples.xml.http.StockServlet
    # BizTalk example properties
    #weblogic.jms.queue.tradeIncoming=biztalk.jms.tradeIncoming
    #weblogic.jms.queue.tradeError=biztalk.jms.tradeError
    #weblogic.httpd.register.BizTalkServer=examples.xml.biztalk.BizHttpProtocolA
    dapter
    #weblogic.httpd.initArgs.BizTalkServer=bizQueue=biztalk.jms.tradeIncoming
    # WEBLOGIC ZAC DEMO PROPERTIES
    # These registrations enable the ZAC Publish Wizard.
    weblogic.zac.enable=true
    # Set the publish root for a WebLogic Server. Edit and
    # uncomment to use.
    #weblogic.zac.publishRoot=d:/weblogic/zac
    # Set an ACL for each package you publish. The [name] is
    # the "Package name" you assign in the ZAC Publish Wizard.
    # Publish a package, edit this property, and uncomment to use.
    #weblogic.allow.read.weblogic.zac.[name]=[user list]
    #weblogic.allow.write.weblogic.zac.[name]=system
    # HTTPD ADMINISTRATIVE PROPERTIES
    # Enables logging of HTTPD info in common log format and
    # sets the log file name (default is "access.log" in "myserver")
    weblogic.httpd.enableLogFile=true
    weblogic.httpd.logFileName=access.log
    # Tracks HTTPD requests with events delivered to WEBLOGIC.LOG.HTTPD
    weblogic.httpd.enableEvents=false
    # Enables HTTP sessions
    weblogic.httpd.session.enable=true
    # Sets an optional cookie name. The default name is "WebLogicSession".
    # Prior to version 4.0, the default was "TengahSession". To make
    # this backward compatible with cookies generated from previous
    # installations, you should set this property to "TengahSession".
    # Uncomment this line and set this to any string of your choice,
    # or comment out this property to use the default.
    #weblogic.httpd.session.cookie.name=WebLogicSession
    # MIME types
    weblogic.httpd.mimeType.text/html=html,htm
    weblogic.httpd.mimeType.image/gif=gif
    weblogic.httpd.mimeType.image/jpeg=jpeg,jpg
    weblogic.httpd.mimeType.application/pdf=pdf
    weblogic.httpd.mimeType.application/zip=zip
    weblogic.httpd.mimeType.application/x-java-vm=class
    weblogic.httpd.mimeType.application/x-java-archive=jar
    weblogic.httpd.mimeType.application/x-java-serialized-object=ser
    weblogic.httpd.mimeType.application/octet-stream=exe
    weblogic.httpd.mimeType.text/vnd.wap.wml=wml
    weblogic.httpd.mimeType.text/vnd.wap.wmlscript=wmls
    weblogic.httpd.mimeType.application/vnd.wap.wmlc=wmlc
    weblogic.httpd.mimeType.application/vnd.wap.wmlscriptc=wmlsc
    weblogic.httpd.mimeType.image/vnd.wap.wbmp=wbmp
    # In seconds, the keep-alive for HTTP and HTTPS requests
    weblogic.httpd.http.keepAliveSecs=60
    weblogic.httpd.https.keepAliveSecs=120
    # WEBLOGIC JDBC DRIVER PROPERTIES
    # Enables JDBC driver logging and sets the file name for the log
    # The weblogic.jdbc.logFile is placed in the per-server
    # directory (default is "myserver")
    weblogic.jdbc.enableLogFile=false
    weblogic.jdbc.logFileName=jdbc.log
    # WEBLOGIC JDBC CONNECTION POOL MANAGEMENT
    # CLUSTER USERS: Note that ALL JDBC connection pools should be set up
    # in the per-cluster properties file ONLY.
    # For creating JDBC connection pools. This example shows a connection
    # pool called "oraclePool" that allows 3 T3Users "guest," "joe," and "jill"
    # to use 4 JDBC connections (with a potential for up to 10 connections,
    # incremented by two at a time, with a delay of 1 second between each
    # attempt to connect to the database), to an Oracle database server called
    # "DEMO." If more than 4 connections are opened, after 15 minutes, unused
    # connections are dropped from the pool until only 4 connections remain
    open.
    # Every 10 minutes, any unused connections in the pool are tested and
    # refreshed if they are not viable.
    #weblogic.jdbc.connectionPool.oraclePool=\
    # url=jdbc:weblogic:oracle,\
    # driver=weblogic.jdbc.oci.Driver,\
    # loginDelaySecs=1,\
    # initialCapacity=4,\
    # maxCapacity=10,\
    # capacityIncrement=2,\
    # allowShrinking=true,\
    # shrinkPeriodMins=15,\
    # refreshMinutes=10,\
    # testTable=dual,\
    # props=user=SCOTT;password=tiger;server=DEMO
    # Get more details on each argument for this property in the
    # Administrators Guide on setting properties at:
    # http://www.weblogic.com/docs51/admindocs/properties.html
    # Set up ACLs for this connection pool with the following:
    weblogic.allow.reserve.weblogic.jdbc.connectionPool.oraclePool=everyone
    # guest,joe,jill
    #weblogic.allow.reset.weblogic.jdbc.connectionPool.oraclePool=\
    # joe,jill
    #weblogic.allow.shrink.weblogic.jdbc.connectionPool.oraclePool=\
    # joe,jill
    # This property is an ACL that specifies the users who can
    # create dynamic connection pools:
    #weblogic.jdbc.connectionPoolcreate.admin=joe,jill
    # Read more about setting up and using connection pools in the
    # developers guide for WebLogic JDBC at:
    # http://www.weblogic.com/docs51/classdocs/API_jdbct3.html#T5a
    # TBCN JDBC CONNECTION POOL MANAGEMENT
    weblogic.jdbc.connectionPool.oraclePool=\
    url=jdbc:oracle:thin:@202.109.102.151:1521:tbcn,\
    driver=oracle.jdbc.driver.OracleDriver,\
    loginDelaySecs=1,\
    initialCapacity=2,\
    maxCapacity=10,\
    capacityIncrement=2,\
    allowShrinking=true,\
    shrinkPeriodMins=15,\
    refreshMinutes=10,\
    testTable=dual,\
    props=user=tbcn;password=ca91768
    weblogic.allow.reserve.weblogic.jdbc.connectionPool.oraclePool=everyone
    weblogic.jdbc.TXDataSource.oracleDataSource=oraclePool
    weblogic.jdbc.DataSource.oracleReadOnlyDataSource=oraclePool
    # WEBLOGIC DEMO CONNECTION POOL PROPERTIES
    # CLUSTER USERS: Note that ALL JDBC connection pools should be set up
    # in the per-cluster properties file ONLY.
    # This connection pool uses the sample Cloudscape database shipped
    # with WebLogic. Used by the EJBean, JHTML, JSP and JMS examples.
    # Uncomment to use:
    #weblogic.jdbc.connectionPool.demoPool=\
    # url=jdbc:cloudscape:demo,\
    # driver=COM.cloudscape.core.JDBCDriver,\
    # initialCapacity=1,\
    # maxCapacity=2,\
    # capacityIncrement=1,\
    # props=user=none;password=none;server=none
    # Add a TXDataSource for the connection pool:
    #weblogic.jdbc.TXDataSource.weblogic.jdbc.jts.demoPool=demoPool
    # Add an ACL for the connection pool:
    #weblogic.allow.reserve.weblogic.jdbc.connectionPool.demoPool=everyone
    # WEBLOGIC HTTP SERVLET PROPERTIES
    # CLUSTER USERS: Note that ALL servlets should be set up
    # in the per-cluster properties file ONLY.
    # WebLogic offers different types of servlets for various uses.
    # Classpath servlet registration
    # The ClasspathServlet is used to serve classes from
    # the system CLASSPATH. It is used by applets to load
    # classes they depend upon, and is registered against
    # the virtual name 'classes' here by default. This means
    # you should set your applet codebase to "/classes".
    # You can register multiple virtual names for this servlet.
    # Note that it can also be used to serve other
    # resources/files from the system CLASSPATH.
    # Don't confuse the ClasspathServlet with the ServletServlet. The
    # ClasspathServlet is used for serving classes for client-side Java only.
    # The ServletServlet is used to invoke unregistered servlets.
    # See the Administrators Guide "Setting up WebLogic as an HTTP server"
    # http://www.weblogic.com/docs51/admindocs/http.html#classfile for more
    info.
    weblogic.httpd.register.classes=weblogic.servlet.ClasspathServlet
    # We also set an open ACL for everyone to call the ClasspathServlet
    # so that applets work without requiring further changes.
    weblogic.allow.execute.weblogic.servlet.classes=everyone
    # File servlet registration
    # FileServlet searches below the documentRoot for the requested file
    # and serves it if found. If the requested file is a directory,
    # FileServlet will append the defaultFilename to the requested path
    # and serve that file if found.
    weblogic.httpd.register.file=weblogic.servlet.FileServlet
    weblogic.httpd.initArgs.file=defaultFilename=index.html
    weblogic.httpd.indexFiles=zh_TW/index.htm
    # ServerSideInclude servlet registration
    # SSIServlet searches below the documentRoot for the
    # requested .shtml file and serves it if found.
    weblogic.httpd.register.*.shtml=weblogic.servlet.ServerSideIncludeServlet
    # Example URL: http://localhost:7001/portside/welcome.shtml
    # for the file /weblogic/myserver/public_html/portside/welcome.shtml
    # PageCompileServlet (used by JHTML)
    # See the information below under WebLogic JHTML
    # JSPServlet (used by JSP)
    # See the information below under WebLogic JSP
    # ServletServlet registration
    # Allows unregistered servlets in the servlet classpath (see Servlet
    # reload properties below) to be r

  • How to invoke A CORBA-Java Client Application, from Oracle???

    Hi,
    I have a CORBA-Java Client Application, which takes the input parameters from a Oracle table and calls the CORBA Server, passes these parameters to the C++ Server Application and gets the results back thorugh CORBA.
    My problem is, this java application needs to be invoked, when ever there is a new record in the Oracle table.
    I am not sure if i can use Java Stored Procedures in Oracle in this case, because my app is in Sun JVM and i am using BEA WebLogic Enterprise 5.1 for the CORBA.
    Is there any other way by which i can invoke this app, when a new record is updated in the Oracle table?
    Currently, i have just put a TIMER in my java App, to check the oracle table in every few seconds, to see if there is a new reocrd. If it finds a new record it invokes the corresponding class(corba class), or else just keep sending a messsage that no new record is available.
    The problems i am facing in this method are as follows;
    1. Unnecessarily, the application has to keep on running if there is no request coming frequently.
    2. When there is a new record found, the Corba Class is called and the whole process (till it gets the result back from the server) takes about 20 - 30 secs. But within this period, if there is another record coming into Oracle table, my timer class doesnt invoke another corba class....(though i am using multithreading by using the RemidTask method in the timer.schedule.
    (timer.schedule(new RemindTask(),10,5*1000);)
    3. Also, if during the first call, there is some error, then the whole process exits, instead of another process running parallely (when a second new record is found).
    So how does this timer class act like a multithreading process?
    Well, i hope i am not confusing....Please let me know if anyone wants bit more elaboration on this.
    It would be really helpful if someone can suggest some answer to my problem.
    Thanks in advance.

    Thank you very much Keith.
    Though i am really getting a hope of solving this problem, from you answer, i am actually not 100% sure if i understood your reply properly.
    First of all, about
    1. "use the update stored procedure to place the updated record (or unique index) onto an Oracle Application Queue."
    -- Why do i need to put the record in the AQ. (Frankly speaking, at this moment i dont have much idea about AQ, probably i can learn more about it from oracle technet site? Or would u suggest anything else?)
    Then,
    2."Your app then waits on this queue and for each new message, consumes it, gets the data required from the AQ load (e.g the index and or record), and fires off the CORBA class"
    -- How does my application stay in the queue? and gets the data from the queue?
    Of course, as far as i understand, i am going through the same principle...keeping on running a timer class, which keeps on checking the table for a new record, and when it finds, it calls the CORBA class.
    Of course, i feel there should be a difference in running the timer continuosly and staying in queue. However i am totally unaware, how can i make my java app to wait in the queue and waits for a new record?
    Can you please elaborate your answer a bit more, because i dont know about the AQ, that you have mentioned.
    Thank you very much in advance for your time. But please know that it will be of great help to me and hence will be higly appreciated.
    Regards,
    Subhasree.

  • How to call a stand alone java application from ADF BC JSP, struts or JSF

    Hi,
    My requirement is that there are utilities or stand alone java applications that I want to call from our existing applications.
    We have two seperate applications one ADF BC Struts application we developed using JDeveloper 10.1.2 and another ADF BC JSF application we developed using JDeveloper 10.1.3.2.
    We want to integrate applications like JTwain and others to help us in scanning. The application will be placed on the same server as our application. How can I do this without loosing all the current session information.
    Please help.
    Thanks and regards,

    There are two possible solutions.
    First, if the tool or application you want to integrate, has an Java-API you can use this api and integrate the tool in your application (using one or more jars you add to the classpath).
    Second, if the tool has no java api, you can call the tool via runtime.exec(...) as a shell process. This way you open a command shell in you application and execute the tool like you do on a normal command shell.
    For tide integration and control I recommend the first approach. The second one is only for those tools which don't offer a java api.
    Timo

  • I'm running Final Cut Express 2. How can I move entire project and application from one internal hard drive to another? Ran out of space on one drive. Thanks.

    I'm running Final Cut Express 2. My video project is 95% done and I've run out of space on my 500g internal hard drive. How can I (1) move the complete FCE program and video to my unused 250g internal hard drive and operate it from there and (2) how do I then purge all the FCE info from the 500g drive without losing anything from the 250 drive?
    Also, is it possible to change the aspect ratio from 4:3 to 16:9 when the project is finished? If so, how? I now know this all should have been done before I started. Thanks for the help.

    1. You can't move the application. It must remain on the system drive. Move your capture scratch folder to the external FireWire drive and use the reconnect function in the project.
    2. What's the media 16:9 or 4:3?

  • How can I run two independant LabView applications from the same computer, without taking a performance hit?

    I have two identical, but independant test stations, both feeding data back to a Data Acquisition Computer running LabView 6.1. Everything is duplicated at the computer as well, with two E-series multifunction I/O cards (one for each test station) and two instances of the same LabView program for acquiring and analysing the data. The DAQ computer has a Celeron processor w/ 850Mhz clock and 512MB memory, and is running on Windows NT.
    I have noticed that when I run both the applications simultaneously, I take a substantial performance hit in terms of processing speed (as opposed to running just one program). Why does this happen and how can I prevent it? (In t
    his particular case, it may be possible to combine both the tests into one program since they are identical, but independant, simultaneous control of two different LabView programs is a concept I need to prove out).
    Thanks in advance for any tips, hints and spoon feedings (!)....

    Depending on your application, you may or may not be able to improve things.
    Firstly, each task requires CPU time, so a certain performance difference is guaranteed. Making sure you have a "wait until ms" in every while loop helps in all but the most CPU intensive programs.
    Secondly, if you are
    1) streaming data to disk
    2) Acquiring lots of data over the PCI bus
    3) Sending lots of data o ver the network
    you can have bottlenecks elsewhere than in your program (limited Disk, PCI or Network bandwidth).
    Avoid also displaying data which doesn`t need to be displayed. An array indicator which only shows one element still needs a lot of processing time if the array itself is large.... Best is to set the indicator invisible if this is the case.
    I think
    it would be best if you could give some more information about the amount of data being acquired, processed and sent. Then maybe it will be more obvious where you can optimise things. If you are running W2000, try activating the task manager while the program(s) are sunning to see where the bottleneck is.
    Shane
    Using LV 6.1 and 8.2.1 on W2k (SP4) and WXP (SP2)

  • How Do I convert to adobe for application from email attached

    How do I convert to PDF file to type the application form .

    Hi khin Thu,
    Do I understand correctly that you have a form that you want to convert to PDF? You can use Adobe Fill & Sign to upload and fill out for your form. See Tutorial: Introduction to Adobe Fill & Sign for more information.
    Please let us know if you have additional questions.
    Best,
    Sara

  • How to add header line in a file from XI system using file adapters

    Hi All,
    I need to add header line (Column names) in a file coming from XI system.
    I am using file adapters.
    Thanks & Regards,
    Gaurav Mittal

    The Receiver File Adapter is configured, using the following settings:
    1) Choose File Content Conversion as the Message Protocol.
    2) You give the ‘addHeaderLine’ parameter as 1
    3) For the ‘fieldSeparator’ parameter you need to give field separator for both list and substructure (referring to the data type above). For eg: it may be a ‘,’ (comma) for substructure in a comma separated file.
    4) The ‘endSeparator’ parameter needs to given for substructure only. For eg: it may be a ‘nl’ (new line)
    5) Give the file name, the directory and the Construction mode. Activate all the settings. Receiver File Adapter with F.C.C. is configured.
    please visit the blog.
    /people/arpit.seth/blog/2005/06/02/file-receiver-with-content-conversion
    /people/venkat.donela/blog/2005/03/02/introduction-to-simplefile-xi-filescenario-and-complete-walk-through-for-starterspart1
    /people/venkat.donela/blog/2005/03/03/introduction-to-simple-file-xi-filescenario-and-complete-walk-through-for-starterspart2

  • How do i remove messages or mail applications from my ipad?

    One of my iPad mini's has tiny storage capacity, and i want to use it for my child to have as a consumption/learning device. I would like to remove the bulky mail and messaging app's that she won't use.
    How can I do this?

    Stock iOS apps can not be removed. You can add them to a folder and move them to another page.

  • How to edit header & footer info that prints from Safari?

    I need to adjust what info is included in the headers & footers that print-out using Safari. For instance, only the time is printing in the header. I need the date to print instead. Can't t find anything in preferences. Thanks.

    Open the print dialogue and click Show Details. Under TextEdit there should be an option to print headers and footers. Uncheck it.

Maybe you are looking for