How set more than 3 mp3 tones as ring tone

I can only 3 MP3 ringtones in my Iphone. How to set more mp3 ring tones inIphone 4. In some times I can 7 mp3 tones in my phone. But the Next synchronizing the tones misplaced. What I can do?

http://osxdaily.com/2010/09/04/make-free-iphone-ringtones-in-itunes-10/

Similar Messages

How to set more than one day in calendar?

Hello.
Is there a way to set more than one day in calendar and every selected day would create new record?
Thanks.

Not without creating your own calendar and maintaining the code to do so yourself.

Server does not support setting more than 5 shared access policy identifiers on a single container

Hi,
I upload a video file to a new Asset. I then attempt to create a streaming URL by creating an Access Policy and then a Locator, which I use to generate the URL used for streaming.This works great. Until the 6th time you execute
that code against the same Asset. Then you receive this error:
"Server does not support setting more than 5 shared access policy identifiers on a single container."
So, that's fine. I don't need to create a new AccessPolicy everytime, I can reuse the one I've created previously, build a Locator using that same policy. However, even then, I get the error about 5 shared access policies on a single container.
Is this the Lmitation of media service? or am I missing something?
Following is the code I used for this:
if (AssetId != "")
                inputAsset = (from a in _context.Assets
                              where a.Id == AssetId
                              select a).FirstOrDefault();
                policy= (from a in _context.AccessPolicies where a.Name==inputAsset.Name select a).FirstOrDefault();
                var assetFile = inputAsset.AssetFiles.Create(Path.GetFileName(singleFilePath));
                var locator = _context.Locators.CreateLocator(LocatorType.Sas, inputAsset, policy);
                assetFile.Upload(singleFilePath);
                locator.Delete();
                MediaElement media = new MediaElement();
                media.AssetId = inputAsset.Id;
                media.Title = Path.GetFileName(singleFilePath);
                var result = Save(media, singleFilePath);
                return inputAsset;
            else
                inputAsset = _context.Assets.Create(User.Identity.Name, AssetCreationOptions.None);
                 policy = _context.AccessPolicies.Create(
                                    inputAsset.Name,
                                    TimeSpan.FromDays(30),
                                    AccessPermissions.Write | AccessPermissions.List
| AccessPermissions.Read | AccessPermissions.Delete);
                 var assetFile = inputAsset.AssetFiles.Create(Path.GetFileName(singleFilePath));
                 var locator = _context.Locators.CreateLocator(LocatorType.Sas, inputAsset, policy);
                 assetFile.Upload(singleFilePath);
                 locator.Delete();
                 policy.Delete();
                 MediaElement media = new MediaElement();
                 media.AssetId = inputAsset.Id;
                 media.Title = Path.GetFileName(singleFilePath);
                 var result = Save(media, singleFilePath);
                 return inputAsset;

Hi,
I found some information related to
Stored Access Policy , Shared Access Signatures   please check if it helps.
Regards,
Shirisha Paderu.

Is there any way to set more than one list validation setting?

Can I set more than one list validation setting without using any coding? It seems strange that you can only have ONE per list (and I don't want just a single column validation).

Hi,
You can use the logical operators to realize multiple columns validation like
=AND(Birthday>DATE(2001,7,1),Location="New York").
For more details, please refert to:
http://msdn.microsoft.com/en-us/library/bb862071.aspx
Regards,
Seven

Set more than one color

hi
i want to set more than one color in hbox .where the hbox is
empty .can u pls tell me .Thanks in Advance

What do you mean? Please describe this in more detail.

Message: 'You cannot set more than 30 breakpoints' - None set

Hi,
I am trying to debug a standard program.
When trying to set a dynamic breakpoint, I get a small dialog screen asking me for the main program. Once selected, I receive the following message:
'You cannot set more than 30 breakpoints'
Debugging using /h from the main program would take a very long time.
I checked and no breakpoints are set (Utilities > Breakpoints > Display).
What do I do? Please help.
Thanks,
John

Hi
check this :
Re: break points in debugging
You can not set more than 30 dynamic breakpoints.
Neha

Set more than one InputVerifier for a JComponent

Is it possible to set more than one InputVerfier for a JComponent. For example, there is one InputVerfier which checks for null values, and another which checks for date format. Can I have both these InputVerfiers attached to a single JComponent ?
regards,
nirvan.

The problem is not the InputVerifier, the problem is you want to use multiple different classes to do the validation. Even if you use another approach you would still have the problem of invoking two different validation classes.
The other approach for validating input fields is to do the validation in the actionPerformed of your "Process/Submit" (or whatever you want to call it) button.
If you want to validate data as it is entered you would use a DocumentFilter.

Mac filtering Netgear CG3100D how to set more than 1 filter

It a previous post the solution given to GMT issue was to set 2 filters, can someone please explain how to create more than 1 filter? My setting seems pretty rigid that there is only 1 filter.Kindly point me to the right direction please, thanks.

Hi silvelining,
There is a help file appears to the right side of the modem screen and should assist with adjusting the settings.
The following links are some of the FAQs from the Netgear site which you might find helpful.
http://kb.netgear.com/app/answers/detail/a_id/13112/~/how-to-configure-access-control-or-mac-filtering-%28smart-wizard-routers%29
http://kb.netgear.com/app/answers/detail/a_id/20483/~/set-up-a-netgear-router-to-block-access-to-certain-websites
- Shelly

How Calculate more than one value and store it into to different rows and column for each input?

thx guys.....i have a progress now in LV
But now i have new trouble here. Ok i attached my LV file (LV 7.0.1/7.1) and excel form. I just could'nt calculate more than one input value. I want a different result for each value that i enter ... and store it into different rows and column. But it just store at one row.
Attachments:
My Project.vi ‏31 KB
rumus motor bakar.xls ‏14 KB

duplicate post

[How?]More than 1 Wine version simultaneously

As a frequent Arch user, I want to broaden my knowledge and skills with Linux - this time, I'd like to be able to have 2 Wine versions - new 1.1.38 and stable 1.0.1. Right now I only have 1.1.38 installed under /opt/wine/. In q4wine it's possible to set different Wine versions, so it looks like something entirely doable and not that hard.
I looked under the PKGBUILD of wine-stable at AUR to see where it installs (I hoped for something like /opt/wine-stable/ to make my life easier), but it didn't tell me much. Because of my newbieness, I don't understand the relevant part:
build() {
ar x $(basename ${source[0]}) || return 1
tar xf data.tar.lzma || return 1
cp -rf etc/ usr/ "$pkgdir"/
But it doesn't look like it's getting installed to /opt/wine-101 or something close.
So, my questions are:
1) Where does wine-stable from AUR install as default?
2) How can I change it to install the binaries to /opt/wine-stable?
3) Will it read my current virtual drive ~/.wine/drive_c/ with any problem? Or I need to setup a separate drive?
4) Will there be two separate instances of winecfg?
Thanks for your help! It is greatly appreciated!

syre wrote:shouldnt it be /etc/ and /usr/?
You are of course right, thanks
But one more problem:
==> Validating source files with md5sums...
wine_1.0.1-0ubuntu8_i386.deb ... Passed
==> Extracting Sources...
==> Entering fakeroot environment...
==> Starting build()...
cp: cannot open `/etc/default/cacerts' for reading: Permission denied
cp: cannot open `/etc/sudoers' for reading: Permission denied
cp: cannot open `/etc/gshadow-' for reading: Permission denied
cp: cannot access `/etc/polkit-1/localauthority': Permission denied
cp: cannot open `/etc/shadow-' for reading: Permission denied
cp: cannot open `/etc/openldap/slapd.conf' for reading: Permission denied
cp: cannot open `/etc/openldap/DB_CONFIG.example' for reading: Permission denied
cp: cannot open `/etc/crypttab' for reading: Permission denied
cp: cannot open `/etc/ppp/chap-secrets' for reading: Permission denied
cp: cannot open `/etc/ppp/pap-secrets' for reading: Permission denied
cp: cannot open `/etc/shadow' for reading: Permission denied
cp: cannot open `/etc/cups/printers.conf' for reading: Permission denied
cp: cannot open `/etc/cups/printers.conf.O' for reading: Permission denied
cp: cannot open `/etc/cups/classes.conf' for reading: Permission denied
cp: cannot open `/etc/ssh/ssh_host_rsa_key' for reading: Permission denied
cp: cannot open `/etc/ssh/ssh_host_key' for reading: Permission denied
cp: cannot open `/etc/ssh/ssh_host_dsa_key' for reading: Permission denied
cp: cannot open `/etc/cups.OLD/printers.conf' for reading: Permission denied
cp: cannot open `/etc/cups.OLD/printers.conf.O' for reading: Permission denied
cp: cannot open `/etc/.pwd.lock' for reading: Permission denied
cp: cannot open `/etc/gshadow' for reading: Permission denied
cp: cannot open `/etc/passwd-' for reading: Permission denied
cp: cannot open `/etc/group-' for reading: Permission denied
^C
==> ERROR: Aborted by user! Exiting...
I Ctrl+C'ed it, because obviously it needs sudo permissions. But I don't know if I should run makepkg as sudo, because 1) it could be dangerous, since the PKGBUILD is yet unproved to be safe 2) there is something like fakeroot to use in PKGBUILDs, no? How do I do this?

How to more than one scale (4.0 scale and 4.3 scale)

Dear All,
In our case( Korea Sogang University) customer used 4.0 scale for module appraisal but changed to 4.3 scale some years ago.
In this case how can we use two scale ?.
some students have 4.0 scale appraisal and 4.3 scale also.
I want to total GPA as 4.3 scale bases becuase it is used currently.
regards,
jin dal

Jin Dal,
I think you can simplify this, depending on how you have actually defined the scales. In an ideal world, you would have set up the scales in the following way:
KRDO (A-F)
A = 90,000
B= 80,000
C= 70,000
etc., or some similar scale values
KRG1 (4.0 scale)
4.0 would map to 90,000 (NOT 100,000) - This means that the 'upper limit' of that linear quantity scale is something other than 4.0.
KRDR (A-F with +/-)
A+ = 93,000
A0 = 90,000
etc.
If you did this, then you would not even need scale KRGV.
Here is the problem. You cannot just go and change your scales now to this simple model. Why? The appraisals you have already stored contain the absolute value (i.e. the value on the 100,000 scale). They would then all be wrong, unless you went into each appraisal and re-stored it.
I mainly describe that scenario for everyone else out there setting up their systems. Leave some 'headroom' above you current maximum score in the GPA! You may need it later. This is described in the Base Configuration Cookbook in my sticky post.
Unfortunately for you, I suspect you set up your scale KRDO with A = 100,000, and your linear scale KRG1 with 4.0 as the highest values (= 100,000). That means you really do need the extra 4.3 scale of KRGV.
You will probably not want to keep going into the IMG to change the scale for GPA. In fact you might have a user bring up the performance indices for a pre 2001 student, and then immediately jump to a post-2001 student! So, here are your possible solutions:
1) Just have two different performance indices: one for pre-2001, one for post-2001
2) For your GPA PI, use the 4.3 scale. However, then you need to change your PI Calculation itself to look at the appraisal records. For the pre-2001 students, you need to actually CHANGE (in memory; not in the database) the assigned grades from A to A0, B to B0, C to C0, etc.

Can't make an alarm that is set more than 24 hours in future with JSpinner

I have what I thought was a simple problem, but I can't seem to get past it, so I come to ask the experts.
I want to use a JSpinner to basically set an alarm. I am using the SpinnerDateModel and a DateEditor with the string "HHH:mm:ss". The reason there is three hour feilds is because what I really want is to be able to set it to any number of hours from 0 to 999. But there in lies my problem, it won't let me get past 24.
What I have tried:
I changed the first H to D (or d, whichever is days in the year) but it wont work for me because it can't be zero.
I tried extending the DateEditor code, but this was next to impossible because the company I work for makes us have two machines on our desk, both are thin clients, one connects to the internet but we are not allowed/able to download anything, and it does not have java on it in any form. The other does not connect to the internet, and can not, it has Java on it, but not the source code for methods like DateEditor. So without seeing the source I have no clue what to override.
I really want to use the one JSpinner with the SpinnerDateModel, but if I can't figure this out then I could use seperate spinners for hours, minutes, and seconds though that looks really ugly and is far from ideal.
So please if anyone has any clue how I could solve this, please let me know.
Thanks,
JSG
Edited by: JustSomeGuy on Jun 29, 2010 2:00 PM

I just tried out a JSpinner with the SpinnerDateModel and DateEditor using pattern "HH:mm:ss". Behind the scenes, you are still dealing with a date. If you look at what date gets returned, the first time you spin the spinner using that pattern, the year suddenly jumps to 1970. It's using a default year, because there is no year to spin within your pattern.
So long as you don't feel too guilty or uncool for using the date spinner in a manner that it was not intended, you could probably achieve your objective by abusing the date editor with a pattern like "SSS:mm:ss". That pattern is milliseconds (which conveniently go from 0 to 999), minutes, then seconds. When reading your spinner, just interpret the milliseconds as the hours, minutes as minutes, and seconds as seconds. The rest of the date just gets thrown away. Uncool. But should work.
Or you can be cool and write a custom editor and model, but depending on your experience level, this could be difficult and time consuming. But also comes with a greater feeling of achievement.

Is it possible to set more than one look and feel (laf) to a java program?

Hi
For example,
I really like the windows system look/feel for the menubar + JTabbedPane etc...
But i also like the standard Java'a look/feel for some other components like JButton, JSliders etc..
if so how?
Cause at the moment i only set laf right at the start of the program (main bit) before i actually initialise the swing ui components, so that they all have my defined laf set
thanks

You can add up to three 'aliases' to your account - these are additional addresses (not accounts) which deliver into the same inbox as the main address.
You set them up at http://icloud.com - go to the Mail page, click the cogwheel icon at top right, choose 'Preferences', then in the pane which opens go to 'Accounts' and click the '+' button below the list area.
Note that aliases stick permanently with the account which created them. You cannot move them to another account nor turn them into a full account, and if you delete one you cannot reinstate it.

How can more than one value be assigned to a variable in ODI

Hi,
I am inserting 2 values in DB Table.
I want to get both the values in a single variable in ODI.
Pls tell me how can it be done?
Thanks in advance.

Hi Deca,
Can you pls tell me is the following code fine or not?
<?xml version = '1.0' encoding = 'UTF8'?>
<EmpodiCollection xmlns="http://xmlns.oracle.com/pcbpel/adapter/db/top/tar" xmlns:env="http://schemas.xmlsoap.org/soap/envelope/">
 <Empodi xmlns="">
 <empid>1</empid>
 <empname>ani</empname>
 <bonus>#SOA_ODI_SALARY*0.1</bonus>
 <annualsalary>#SOA_ODI_SALARY*12</annualsalary>
 </Empodi>
</EmpodiCollection>
here #SOA_ODI_SALARY is a variable which is calculating salary from a table src_ws_soa_odi having the code as select Basic_sal from src_ws_soa_odi.
Actually the problem we are facing is that this transformation #SOA_ODI_SALARY*0.1 needs to be mapped in a bpel component as its input, but when i am checking the payload of the bpel component it is showing as follows :
<message>
<properties>
<property name="tracking.compositeInstanceId" value="750014"/>
<property name="tracking.ecid" value="449b4b64fa2729cc:-5b3fd395:140c49e9de6:-8000-00000000000505cc"/>
<property name="transport.http.remoteAddress" value="172.18.22.193"/>
</properties>
<parts>
<part name="request">
<EmpodiCollection>
<Empodi>
<empid>1</empid>
<empname>ani</empname>
<bonus>3400*0.1</bonus>
<annualsalary>3400*12</annualsalary>
</Empodi>
</EmpodiCollection>
</part>
</parts>
</message>
So from my observation I can see the calculation is not taking place in ODI, so pls let me know where i am doing wrong.
Your help is highly appreciated.
Thanks,
Anindya.

AVTransmit, how transmit more than one audio files

Hello. I have download the client server example from your site for transmitting an audio file. The example is in http://java.sun.com/products/java-media/jmf/2.1.1/solutions/AVTransmit2.java
The thing is that i want to change it so as to transmit one audio file after another, something like having a playlist. How can i change the datasource and play the next audio file? I try to change it by adding an endofmedia event but just changing the datasource is not working

I'll post u the jnlp file which i am using. To sign all the jars i've used the same alias ( a self signed certificate using keytool and jarsigner).Here is the jnlp file:
<?xml version="1.0" encoding="utf-8"?>
<jnlp spec="0.2 1.0"
codebase="http://127.0.0.1:8080/healthdec"
href="testTool.jnlp">
<information>
<title>Unit Test Manager </title>
<vendor>Sun Microsystems, Inc.</vendor>
<description>A minimalist drawing application along the lines of Illustrator</description>
<icon href="images/testing.gif"/>
<offline-allowed/>
</information>
<resources>
<j2se version="1.3+ 1.2+"/>
<jar href="utestfw.jar" main="true" download="eager"/>
<jar href="crimson.jar" main="false" download="eager"/>
<jar href="jaxp.jar" main="false" download="eager"/>
</resources>
<application-desc main-class="utestfw.ObjectBrowser"/>
<security>
<all-permissions/>
</security>
</jnlp>
Can u please look at the above code and suggest me where i am wrong. Thanks.
-Regards
Aparna

How set more than 3 mp3 tones as ring tone

Similar Messages

Maybe you are looking for