How similar is the performance and tuning 1z1-064 (12c) to the 1z0-054 (11g)?
I had taken the Oracle 11g performance and Tuning class from Oracle.
I am just wondering how close the 1z1-064 will be to the 1z0-054.
I am also studying for the 1z1-064 exam.
Are there any books out yet, or just the otn material.
Thanks Roger
Hopefully John Watson will pipe in on this. I know he has taken both exams. He recently noted on the OraFAQ forum that he had taken both the 1Z0-063 and 1Z0-064 beta exams. His comments about them there were:
"I would say that looking at the exams as a whole, there is a huge improvement over the 10g and 11g equivalents. The new exams cover a lot more material in a lot greater detail, and are a lot harder. These 12c exams are a Good Thing for the profession. They should filter out a lot of exam-cram only DBAs"
It's not clear to me how much of that comment was directed at 063 and how much at 064. The topic list for 063 is much larger than that for 053. However, the topic list for 064 is actually a bit smaller than that of 054.
Similar Messages
-
FAQ's, intros and memorable discussions in the Performance and Tuning Forum
Welcome to the SDN ABAP Performance and Tuning Forum!
In addition to release dependent information avalaible by:
- pressing the F1 key on an ABAP statement,
- or searching for them in transaction ABAPDOCU,
- using the [SDN ABAP Development Forum Search|https://www.sdn.sap.com/irj/sdn/directforumsearch?threadid=&q=&objid=c42&daterange=all&numresults=15&rankby=10001],
- the information accessible via the [SDN ABAP Main Wiki|https://wiki.sdn.sap.com/wiki/display/ABAP],
- the [SAP Service Marketplace|http://service.sap.com] and see [SAP Note 192194|https://service.sap.com/sap/support/notes/192194] for search tips,
- the 3 part [How to write guru ABAP code series|https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/f2dac69e-0e01-0010-e2b6-81c1e8e5ce50] ... (use the search to easily find the other 2 documents...)
... this "sticky post" lists some threads from the ABAP forums as:
- An introduction for new members / visitors on topics discussed in threads,
- An introduction to how the forums are used and the quality expected,
- A collection of some threads which provided usefull answers to questions which are frequently asked, and,
- A collection of some memorable threads if you feel like reading some ABAP related material.
The listed threads will be enhanced from time to time. Please feel welcome to post to [this thread|Suggestions thread for ABAP FAQ sticky; to suggest any additional inclusions.
Note: When asking a question in the forum, please also provide sufficient information such that the question can be answered usefully, do not repeat interview-type questions, and once closed please indicate which solution was usefull - to help others who search for it.ABAP Performance and Tuning
Read Performance => Gurus take over the discussion from Guests caught cheating the points-system.
SELECT INTO TABLE => Initial questions often result in interesting follow-up discussions.
Inner Joins vs For all Entries. => Including infos about system parameters for performance optimization.
Inner Join Vs Database view Vs for all entries => Usefull literature recommended by performance guru YukonKid.
Inner Joins vs For All Entries - performance query => Performance legends unplugged... read the blogs as well.
The ABAP Runtime Trace (SE30) - Quick and Easy => New tricks in old tools. See other blogs by the same author as well.
Skip scan used instead of (better?) range scan => Insider information on how index access works.
DELETE WHERE sample case that i would like to share with you => Experts discussing the deletion of data from internal tables.
Impact of Order of fields in Secondary index => Also discussing order of fields in WHERE-clause
"SELECT SINGLE" vs. "SELECT UP TO 1 ROWS" => Better for performance or semantics?
into corresponding fields of table VERSUS into table => detailed discussion incl. runtime measurements
Indexes making program run slower... => Everything you ever wanted to know about Oracle indexes.
New! Mass reading standard texts (STXH, STXL) => avoiding single calls to READ_TEXT for time-critical processes
New! Next Generation ABAP Runtime Analysis (SAT) => detailed introduction to the successor of SE30
New! Points to note when using FOR ALL ENTRIES => detailed blog on the pitfall(s) a developer might face when using FAE
New! Performance: What is the best way to check if a record exist on a table ? => Hermann's tips on checking existence of a record in a table
Message was edited by: Oxana Noa Zubarev -
A process for the performance monitoring, tuning and fixing issues
Hello
Any recommendations for 10g a process/procedure/methodology for the performance monitoring, tuning and fixing issues for a team to follow ?Ranker wrote:
Hello
Any recommendations for 10g a process/procedure/methodology for the performance monitoring, tuning and fixing issues for a team to follow ?1) upgrade the DB to a supported version.
2) Read The Fine Manual; Performance Tuning Guide
http://docs.oracle.com/cd/E11882_01/server.112/e10822/toc.htm
Handle: Ranker
Status Level: Newbie
Registered: May 12, 2013
Total Posts: 13
Total Questions: 4 (4 unresolved)
How sad!
why do you never get your questions answered here? -
Can anybody recommend any useful performance and tuning books.
I should probably limit my search to 11g or higher.
I am starting to prep for the 12c perf and tuning beta I have scheduled on March 21st.
Thanks RogerHi,
I will review your review.
I do see this Oracle 12c book at Amazon written over a year ago.
Its not a certificaiton book.
I also did take the course at Oracle for 11g performance and tuning.
Amazon book:
Oracle Database 12c Performance Tuning Recipes: A Problem solving approach.
Thanks Roger -
Performance and tuning techniques
Hi Experts,
Good moring, please help me to send what are performance and tuning techniques in abap programming.
how to improve the performance of abap program please give reply asap.
Regards
VenkatDid you notice that your previous 6-odd questions were deleted by the moderators for breaking the rules of this forum? If you do not read the rules and abide by it, you will surely lose your account here in SCN.
pk -
Best General practice for performance and tuning.
Hi ,
Can some body let me know the General Best practice for performance and tuning for Oracle Application 11i and 10g.
that can be implemented and suggest in a new environment.
Regards,Hi,
Please see the following documents/threads.
Note: 744143.1 - Tuning performance on eBusiness suite
Note: 864226.1 - How Can I Diagnose Poor E-Business Suite Performance?
Note: 362851.1 - Guidelines to setup the JVM in Apps Ebusiness Suite 11i and R12
Note: 216205.1 - Database Initialization Parameters for Oracle Applications Release 11i
EBS, performence issue
Re: EBS, performence issue
Oracle Apps Tuning
Re: Oracle Apps Tuning
Regards,
Hussein -
Check List for Performance and tuning
Hello Experts,
can anyone send me a document for BW performance and tuning
1. step by step guide for solving the performance issues
or
2. check list for performanceOur book on BW performance tuning has a detailed explanation and recommendations regarding step by step process of how to do the performance tuning as you have desired.
Pl. refer to the following link to know about the book.
http://www.amazon.com/SAP-Performance-Tuning-Shreekant-Shiralkar/dp/0977725146/ref=sr_1_1?ie=UTF8&s=books&qid=1196767811&sr=1-1.
You will notice that the book has screen shots and detailed theory on aspects like indexes like B Tree Index or Bitmap Index to help you identify and improve perfromance of your BW system.
Thanking you in advance for sharing your feedback on the book and its "reference" value for your work.
Shreekant -
Tyring to find my own course pdf for oracle performance and tuning 11g that I took thru Oracle.
I am studying for 1z0-064 currently using 10g perf tuning book.
Would Oracle have list of Oracle classes that i have taken.
If they do, is there any way to get hold of the pdf from the class that I took?
I realize that this is a stretch.
RogerRoger,
This is a question that you'd need to contact Oracle University Support about - Oracle University Contact Information. They should be able to help you.
Regards,
Brandye Barrington
Oracle Certification Program -
How to have more months and years appear for selection in the archives for blog posts?
Hello,
How to have more months and years appear for selection in the archives for blog posts? It just shows past 3 months in the year 2014, but we have many blog posts in years 2013, 2012 and 2011 and further back. I am using the OOB SharePoint blog
feature.
PaulHi,
Thanks for the reply; it doesn't add anything as RSA6 was one of the options I listed and this was my fall back option if there was no other special treatment for the COPA datasources.
I have found out why this, and other fields, are not available in KEB0. The program uses a Function called KERA_COPA_METADATA_INTERFACE within which there is a section that selects the COPA fields:
***** 1. RULES (choice/class)
* set rules for fixed fields
PERFORM COPA_SET_RULES_FIXED_FIELDS USING I_ACCTCOST
CHANGING E_T_RULES[].
When you look at this code section there is a hard coded list of fields to exclude:
MRULE 'MANDT ' NEVER FORGET_IT NEVER FORGET_IT.
MRULE 'PAOBJNR ' NEVER FORGET_IT NEVER FORGET_IT.
MRULE 'PASUBNR ' NEVER FORGET_IT NEVER FORGET_IT.
MRULE 'PAPAOBJNR ' NEVER FORGET_IT NEVER FORGET_IT.
MRULE 'PAPASUBNR ' NEVER FORGET_IT NEVER FORGET_IT.
MRULE 'HRKFT ' NEVER FORGET_IT NEVER FORGET_IT.
MRULE 'HZDAT ' NEVER FORGET_IT NEVER FORGET_IT.
MRULE 'USNAM ' NEVER FORGET_IT NEVER FORGET_IT.
MRULE 'RKESTATU ' NEVER FORGET_IT NEVER FORGET_IT.
MRULE 'TIMESTMP ' NEVER FORGET_IT NEVER FORGET_IT.
MRULE 'PERDE ' NEVER FORGET_IT NEVER FORGET_IT.
MRULE 'PERIO ' OBLIGATORY CHAR_CE3 OBLIGATORY CHAR_CE3.
MRULE 'COPA_AWTYP' NEVER FORGET_IT NEVER FORGET_IT.
MRULE 'COPA_AWORG' NEVER FORGET_IT NEVER FORGET_IT.
As this is a standard delivered SAP function I do not recommend that you change this code as you will invalid your SAP support and upgrade paths.
Thanks
Neil -
Quicktime stuttering, MOV file plays fine on my iphone but play it in my PC the sound and video stutters. happened only after the last update. how to fix?
Hi Richmoller51,
Welcome to Apple Support Communities.
See this article for some troubleshooting steps that can help with video playback in iTunes or Quicktime:
Troubleshooting iTunes for Windows Vista or Windows 7 video playback performance issues
http://support.apple.com/kb/ts1718
Best,
Jeremy -
I've uploaded Acrobat XI Pro and it freezes when I'm using it. I uninstalled and re-installed. When I login, it says that it is unable to validate the account and has an option to use the trial. How do I fix this?
This is an open forum, not Adobe support... you need Adobe staff support to help
Adobe contact information - http://helpx.adobe.com/contact.html
-Select your product and what you need help with
-Click on the blue box "Still need help? Contact us" -
How do I delete movies from iTunes library? I have moved them to the iCloud and now only seem to have the option to hide the icon in iCloud. I am sure I chose poorly at the 'keep file' window. Please help. My Brain hurts… 18 plus movies need to go…. Thank you.
Instead of removing the music from the cloud or the iTunes library why not shuffle your music using a Smart Playlist which excludes the holiday music, or tracks that are not checked. For example, use this very simple Smart Playlist:
-
I am new to iMovies. When I make a video using the mic and camera in my Macbook Pro, the audio and video are not in synch. Very annoying. How can I fix this?
DVD drives read the bottom of the disk, not the top. Smooth out the paper & try again.
-
I have a Windows copy of Photoshop Elements 11, but the serial number has been lost. I didn't buy the product and I am unable to find the box. As far as I know, it's never been used so has not been registered. Does anyone know how the serial number can be recovered under these circumstances?
If you never bought the product then you cannot get the serial number.
-
How to use direct select and insert or load to speedup the process instead of cursur
Hi friends,
I have stored procedure .In SP i am using cursur to load data from Parent to several child table.
I have attached the script with this message.
And my problem is how to use direct select and insert or load to speedup the process instead of cursur.
Can any one please suggest me how to change this scripts pls.
USE [IconicMarketing]
GO
/****** Object: StoredProcedure [dbo].[SP_DMS_INVENTORY] Script Date: 3/6/2015 3:34:03 PM ******/
SET ANSI_NULLS ON
GO
SET QUOTED_IDENTIFIER ON
GO
-- =============================================
-- Author: <ARUN,NAGARAJ>
-- Create date: <11/21/2014>
-- Description: <STORED PROCEDURE FOR DMS_INVENTORY>
-- =============================================
ALTER PROCEDURE [dbo].[SP_DMS_INVENTORY]
@Specific_Date varchar(20) ,
@DealerNum Varchar(6),
@Date_Daily varchar(50)
AS
BEGIN
SET NOCOUNT ON;
--==========================================================================
-- INVENTORY_CURSUR
--==========================================================================
DECLARE
@FileType varchar(50),
@ACDealerID varchar(50),
@ClientDealerID varchar(50),
@DMSType varchar(50),
@StockNumber varchar(50),
@InventoryDate datetime ,
@StockType varchar(100),
@DMSStatus varchar(50),
@InvoicePrice numeric(18, 2),
@CostPack varchar(50),
@SalesCost numeric(18, 2),
@HoldbackAmount numeric(18, 2),
@ListPrice numeric(18, 2),
@MSRP varchar(max),
@LotLocation varchar(50),
@TagLine varchar(max),
@Certification varchar(max),
@CertificationNumber varchar(max),
@VehicleVIN varchar(50),
@VehicleYear bigint ,
@VehicleMake varchar(50),
@VehicleModel varchar(50),
@VehicleModelCode varchar(50),
@VehicleTrim varchar(50),
@VehicleSubTrimLevel varchar(max),
@Classification varchar(max),
@TypeCode varchar(100),
@VehicleMileage bigint ,
@EngineCylinderCount varchar(10) ,
@TransmissionType varchar(50),
@VehicleExteriorColor varchar(50),
@VehicleInteriorColor varchar(50),
@CreatedDate datetime ,
@LastModifiedDate datetime ,
@ModifiedFlag varchar(max),
@InteriorColorCode varchar(50),
@ExteriorColorCode varchar(50),
@PackageCode varchar(50),
@CodedCost varchar(50),
@Air varchar(100),
@OrderType varchar(max),
@AgeDays bigint ,
@OutstandingRO varchar(50),
@DlrAccessoryRetail varchar(50),
@DlrAccessoryCost varchar(max),
@DlrAccessoryDesc varchar(max),
@ModelDesc varchar(50),
@Memo1 varchar(1000),
@Memo2 varchar(max),
@Weight varchar(max),
@FloorPlan numeric(18, 2),
@Purchaser varchar(max),
@PurchasedFrom varchar(max),
@InternetPrice varchar(50),
@InventoryAcctDollar numeric(18, 2),
@VehicleType varchar(50),
@DealerAccessoryCode varchar(50),
@AllInventoryAcctDollar numeric(18, 2),
@BestPrice varchar(50),
@InStock bigint ,
@AccountingMake varchar(50),
@GasDiesel varchar(max),
@BookValue varchar(10),
@FactoryAccessoryDescription varchar(max),
@TotalReturn varchar(10),
@TotalCost varchar(10),
@SS varchar(max),
@VehicleBody varchar(max),
@StandardEquipment varchar(max),
@Account varchar(max),
@CalculatedPrice varchar(10),
@OriginalCost varchar(10),
@AccessoryCore varchar(10),
@OtherDollar varchar(10),
@PrimaryBookValue varchar(10),
@AmountDue varchar(10),
@LicenseFee varchar(10),
@ICompany varchar(max),
@InvenAcct varchar(max),
@Field23 varchar(max),
@Field24 varchar(max),
@SalesCode bigint,
@BaseRetail varchar(10),
@BaseInvAmt varchar(10),
@CommPrice varchar(10),
@Price1 varchar(10),
@Price2 varchar(10),
@StickerPrice varchar(10),
@TotInvAmt varchar(10),
@OptRetail varchar(max),
@OptInvAmt varchar(10),
@OptCost varchar(10),
@Options1 varchar(max),
@Category varchar(max),
@Description varchar(max),
@Engine varchar(max),
@ModelType varchar(max),
@FTCode varchar(max),
@Wholesale varchar(max),
@Retail varchar(max),
@Draft varchar(max),
@myerror varchar(500),
@Inventoryid int,
@errornumber int,
@errorseverity varchar(500),
@errortable varchar(50),
@errorstate int,
@errorprocedure varchar(500),
@errorline varchar(50),
@errormessage varchar(1000),
@Invt_Id int,
@flatfile_createddate datetime,
@FtpDate date,
@Inv_cur varchar(1000),
@S_Year varchar(4),
@S_Month varchar(2),
@S_Date varchar(2),
@Date_Specfic varchar(50),
@Param_list nvarchar(max),
@Daily_Date Varchar(50);
--====================================================================================
--DECLARE CURSUR FOR SPECIFIC DATE (OR) DEALER-ID WITH SPECIFIC DATE (OR) CURRENT DATE
--====================================================================================
set @Date_Specfic = Substring(@Specific_Date,1,4) +'-'+Substring(@Specific_Date,5,2)+'-'+Substring(@Specific_Date,7,2);
set @Daily_Date = SUBSTRING(@Date_Daily,14,4) + '-' + SUBSTRING(@Date_Daily,18,2)+ '-' + SUBSTRING(@date_Daily,20,2)
IF @Daily_Date IS NOT NULL
BEGIN
Delete From [dbo].[DMS_INVENTORY_DETAILS]
Where DMSInventoryID in(select ID from [dbo].[DMS_INVENTORY] where CONVERT (date,FtpDate)=CONVERT (date,GETDATE()));
Delete From [dbo].[DMS_INVENTORY_AMOUNT]
Where DMSInventoryID in(select ID from [dbo].[DMS_INVENTORY] where CONVERT (date,FtpDate)=CONVERT (date,GETDATE()));
Delete From [dbo].[ICONIC_INVENTORY_VEHICLE]
Where DMSInventoryVehicleID in(select ID from [dbo].[DMS_INVENTORY] where CONVERT (date,FtpDate)=CONVERT (date,GETDATE()));
Delete From [dbo].[DMS_INVENTORY_VEHICLE]
Where DMSInventoryID in(select ID from [dbo].[DMS_INVENTORY] where CONVERT (date,FtpDate)=CONVERT (date,GETDATE()));
Delete From [dbo].[ICONIC_EQUITY_INVENTORY_COMPARE]
Where InventoryVehicleId in(select ID from [dbo].[DMS_INVENTORY] where CONVERT (date,FtpDate)=CONVERT (date,GETDATE()));
Delete From [dbo].[DMS_INVENTORY]
Where ID in(select ID from [dbo].[DMS_INVENTORY] where CONVERT (date,FtpDate)=CONVERT (date,GETDATE()));
DECLARE Inventory_Cursor CURSOR FOR
SELECT * from [dbo].[FLATFILE_INVENTORY] where
CONVERT (date,flatfile_createddate) = CONVERT (date,GETDATE()) order by flatfile_createddate;
END
Else
BEGIN
if (@Date_Specfic IS NOT NULL AND @DealerNum != '?????')
BEGIN
Delete From [dbo].[DMS_INVENTORY_DETAILS]
Where DMSInventoryID in(select ID from [dbo].[DMS_INVENTORY] where FtpDate=@Date_Specfic AND DMSDealerID='ACTEST' + @DealerNum);
Delete From [dbo].[DMS_INVENTORY_AMOUNT]
Where DMSInventoryID in(select ID from [dbo].[DMS_INVENTORY] where FtpDate=@Date_Specfic AND DMSDealerID='ACTEST' + @DealerNum);
Delete From [dbo].[ICONIC_INVENTORY_VEHICLE]
Where DMSInventoryVehicleID in(select ID from [dbo].[DMS_INVENTORY] where FtpDate=@Date_Specfic AND DMSDealerID='ACTEST' + @DealerNum);
Delete From [dbo].[DMS_INVENTORY_VEHICLE]
Where DMSInventoryID in(select ID from [dbo].[DMS_INVENTORY] where FtpDate=@Date_Specfic AND DMSDealerID='ACTEST' + @DealerNum);
Delete From [dbo].[ICONIC_EQUITY_INVENTORY_COMPARE]
Where InventoryVehicleId in(select ID from [dbo].[DMS_INVENTORY] where FtpDate=@Date_Specfic AND DMSDealerID='ACTEST' + @DealerNum);
Delete From [dbo].[DMS_INVENTORY]
Where ID in(select ID from [dbo].[DMS_INVENTORY] where FtpDate=@Date_Specfic AND DMSDealerID='ACTEST' + @DealerNum);
DECLARE Inventory_Cursor CURSOR FOR
SELECT * from [dbo].[FLATFILE_INVENTORY] where FtpDate=@Date_Specfic AND ACDealerID='ACTEST' + @DealerNum;
END
ELSE
BEGIN
Delete From [dbo].[DMS_INVENTORY_DETAILS]
Where DMSInventoryID in(select ID from [dbo].[DMS_INVENTORY] where FtpDate=@Date_Specfic);
Delete From [dbo].[DMS_INVENTORY_AMOUNT]
Where DMSInventoryID in(select ID from [dbo].[DMS_INVENTORY] where FtpDate=@Date_Specfic);
Delete From [dbo].[ICONIC_INVENTORY_VEHICLE]
Where DMSInventoryVehicleID in(select ID from [dbo].[DMS_INVENTORY] where FtpDate=@Date_Specfic);
Delete From [dbo].[DMS_INVENTORY_VEHICLE]
Where DMSInventoryID in(select ID from [dbo].[DMS_INVENTORY] where FtpDate=@Date_Specfic);
Delete From [dbo].[ICONIC_EQUITY_INVENTORY_COMPARE]
Where InventoryVehicleId in(select ID from [dbo].[DMS_INVENTORY] where FtpDate=@Date_Specfic);
Delete From [dbo].[DMS_INVENTORY]
Where ID in(select ID from [dbo].[DMS_INVENTORY] where FtpDate=@Date_Specfic);
DECLARE Inventory_Cursor CURSOR FOR
SELECT * from [dbo].[FLATFILE_INVENTORY] where FtpDate=@Date_Specfic;
END
END
OPEN Inventory_Cursor
FETCH NEXT FROM Inventory_Cursor
INTO
@FileType ,
@ACDealerID ,
@ClientDealerID ,
@DMSType ,
@StockNumber ,
@InventoryDate ,
@StockType ,
@DMSStatus ,
@InvoicePrice ,
@CostPack ,
@SalesCost ,
@HoldbackAmount ,
@ListPrice ,
@MSRP ,
@LotLocation ,
@TagLine ,
@Certification ,
@CertificationNumber ,
@VehicleVIN ,
@VehicleYear ,
@VehicleMake ,
@VehicleModel ,
@VehicleModelCode ,
@VehicleTrim ,
@VehicleSubTrimLevel ,
@Classification ,
@TypeCode ,
@VehicleMileage ,
@EngineCylinderCount ,
@TransmissionType ,
@VehicleExteriorColor ,
@VehicleInteriorColor ,
@CreatedDate ,
@LastModifiedDate ,
@ModifiedFlag ,
@InteriorColorCode ,
@ExteriorColorCode ,
@PackageCode ,
@CodedCost ,
@Air ,
@OrderType ,
@AgeDays ,
@OutstandingRO ,
@DlrAccessoryRetail ,
@DlrAccessoryCost ,
@DlrAccessoryDesc ,
@ModelDesc ,
@Memo1 ,
@Memo2 ,
@Weight ,
@FloorPlan ,
@Purchaser ,
@PurchasedFrom ,
@InternetPrice ,
@InventoryAcctDollar ,
@VehicleType ,
@DealerAccessoryCode ,
@AllInventoryAcctDollar ,
@BestPrice ,
@InStock ,
@AccountingMake ,
@GasDiesel ,
@BookValue ,
@FactoryAccessoryDescription ,
@TotalReturn ,
@TotalCost ,
@SS ,
@VehicleBody ,
@StandardEquipment ,
@Account ,
@CalculatedPrice ,
@OriginalCost ,
@AccessoryCore ,
@OtherDollar ,
@PrimaryBookValue ,
@AmountDue ,
@LicenseFee ,
@ICompany ,
@InvenAcct ,
@Field23 ,
@Field24 ,
@SalesCode ,
@BaseRetail ,
@BaseInvAmt ,
@CommPrice ,
@Price1 ,
@Price2 ,
@StickerPrice ,
@TotInvAmt ,
@OptRetail ,
@OptInvAmt ,
@OptCost ,
@Options1 ,
@Category ,
@Description ,
@Engine ,
@ModelType ,
@FTCode ,
@Wholesale ,
@Retail ,
@Draft ,
@flatfile_createddate,
@FtpDate;
WHILE @@FETCH_STATUS = 0
BEGIN
--==========================================================================
-- INSERT INTO INVENTORY (PARENT TABLE)
--==========================================================================
BEGIN TRY
INSERT INTO [dbo].[DMS_INVENTORY]
DMSDealerID,
StockNumber,
DMSType,
InventoryDate,
FtpDate
VALUES (@ClientDealerID,@StockNumber,@DMSType,@InventoryDate,@FtpDate);
END TRY
BEGIN CATCH
SELECT
@errornumber = ERROR_NUMBER(),
@errorseverity = ERROR_SEVERITY(),
@errortable = 'DMS_INVENTORY',
@errorstate = ERROR_STATE(),
@errorprocedure = ERROR_PROCEDURE(),
@errorline = ERROR_LINE(),
@errormessage = ERROR_MESSAGE();
--==========================================================================
-- INSERT ERRORS INTO DMSLOG_INVENTORY_ERROR
--==========================================================================
EXEC [SP_DMS_INVENTORY_ERROR] @FileType,@ACDealerID,@ClientDealerID,@DMSType,@StockNumber,@InventoryDate,@StockType,@DMSStatus,@InvoicePrice,@CostPack,
@SalesCost,@HoldbackAmount,@ListPrice,@MSRP,@LotLocation,@TagLine,@Certification,@CertificationNumber,@VehicleVIN,@VehicleYear,@VehicleMake,@VehicleModel,@VehicleModelCode,
@VehicleTrim,@VehicleSubTrimLevel,@Classification,@TypeCode,@VehicleMileage,@EngineCylinderCount,@TransmissionType,@VehicleExteriorColor,@VehicleInteriorColor,
@CreatedDate,@LastModifiedDate,@ModifiedFlag,@InteriorColorCode,@ExteriorColorCode,@PackageCode,@CodedCost,@Air,@OrderType,@AgeDays,@OutstandingRO,
@DlrAccessoryRetail,@DlrAccessoryCost,@DlrAccessoryDesc,@ModelDesc,@Memo1,@Memo2,@Weight,@FloorPlan,@Purchaser,@PurchasedFrom,@InternetPrice,
@InventoryAcctDollar,@VehicleType,@DealerAccessoryCode,@AllInventoryAcctDollar,@BestPrice,@InStock,@AccountingMake,@GasDiesel,@BookValue,
@FactoryAccessoryDescription,@TotalReturn,@TotalCost,@SS,@VehicleBody,@StandardEquipment,@Account,@CalculatedPrice,@OriginalCost,@AccessoryCore,
@OtherDollar,@PrimaryBookValue,@AmountDue,@LicenseFee,@ICompany,@InvenAcct,@Field23,@Field24,@SalesCode,@BaseRetail,@BaseInvAmt,@CommPrice,@Price1,
@Price2,@StickerPrice,@TotInvAmt,@OptRetail,@OptInvAmt,@OptCost,@Options1,@Category,@Description,@Engine,@ModelType,@FTCode,@Wholesale,@Retail,@Draft,
@ERRORNUMBER,@ERRORSEVERITY,@ERRORTABLE,@ERRORSTATE,@ERRORPROCEDURE,@ERRORLINE,@errormessage,@FtpDate
END CATCH
-- PRINT @errornumber;
-- PRINT @errorseverity;
-- PRINT @errortable;
-- PRINT @errorprocedure;
-- PRINT @errorline;
-- PRINT @errormessage;
-- PRINT @errorstate;
set @myerror = @@ERROR;
-- This -- PRINT statement -- PRINTs 'Error = 0' because
-- @@ERROR is reset in the IF statement above.
-- PRINT N'Error = ' + @myerror;
set @Inventoryid = scope_identity();
-- PRINT @Inventoryid;
--==========================================================================
-- INSERT INTO DMS_INVENTORY_DETAILS (CHILD TABLE)
--==========================================================================
BEGIN TRY
INSERT INTO [dbo].[DMS_INVENTORY_DETAILS]
DMSInventoryID,
StockType,
DMSStatus,
LotLocation,
TagLine,
Certification,
CertificationNumber,
CreatedDate,
LastModifiedDate,
ModifiedFlag,
PackageCode,
OrderType,
AgeDays,
OutstandingRO,
Memo1,
Memo2,
Purchaser,
PurchasedFrom,
DealerAccessoryCode,
InStock,
AccountingMake,
SS,
Account,
AccessoryCore,
ICompany,
InvenAcct,
Field23,
Field24,
SalesCode,
Draft,
FTCode,
FtpDate
VALUES (
@InventoryID,
@StockType,
@DMSStatus,
@LotLocation,
@TagLine,
@Certification,
@CertificationNumber,
@CreatedDate,
@LastModifiedDate,
@ModifiedFlag,
@PackageCode,
@OrderType,
@AgeDays,
@OutstandingRO,
@Memo1,
@Memo2,
@Purchaser,
@PurchasedFrom,
@DealerAccessoryCode,
@InStock,
@AccountingMake,
@SS,
@Account,
@AccessoryCore,
@ICompany,
@InvenAcct,
@Field23,
@Field24,
@SalesCode,
@Draft,
@FTCode,
@FtpDate
END TRY
BEGIN CATCH
SELECT
@errornumber = ERROR_NUMBER(),
@errorseverity = ERROR_SEVERITY(),
@errorstate = ERROR_STATE(),
@errortable = 'DMS_INVENTORY_DETAILS',
@errorprocedure = ERROR_PROCEDURE(),
@errorline = ERROR_LINE(),
@errormessage = ERROR_MESSAGE();
--==========================================================================
-- INSERT ERRORS INTO DMSLOG_INVENTORY_ERROR
--==========================================================================
EXECUTE [SP_DMS_INVENTORY_ERROR] @FileType,@ACDealerID,@ClientDealerID,@DMSType,@StockNumber,@InventoryDate,@StockType,@DMSStatus,@InvoicePrice,@CostPack,
@SalesCost,@HoldbackAmount,@ListPrice,@MSRP,@LotLocation,@TagLine,@Certification,@CertificationNumber,@VehicleVIN,@VehicleYear,@VehicleMake,@VehicleModel,@VehicleModelCode,
@VehicleTrim,@VehicleSubTrimLevel,@Classification,@TypeCode,@VehicleMileage,@EngineCylinderCount,@TransmissionType,@VehicleExteriorColor,@VehicleInteriorColor,
@CreatedDate,@LastModifiedDate,@ModifiedFlag,@InteriorColorCode,@ExteriorColorCode,@PackageCode,@CodedCost,@Air,@OrderType,@AgeDays,@OutstandingRO,
@DlrAccessoryRetail,@DlrAccessoryCost,@DlrAccessoryDesc,@ModelDesc,@Memo1,@Memo2,@Weight,@FloorPlan,@Purchaser,@PurchasedFrom,@InternetPrice,
@InventoryAcctDollar,@VehicleType,@DealerAccessoryCode,@AllInventoryAcctDollar,@BestPrice,@InStock,@AccountingMake,@GasDiesel,@BookValue,
@FactoryAccessoryDescription,@TotalReturn,@TotalCost,@SS,@VehicleBody,@StandardEquipment,@Account,@CalculatedPrice,@OriginalCost,@AccessoryCore,
@OtherDollar,@PrimaryBookValue,@AmountDue,@LicenseFee,@ICompany,@InvenAcct,@Field23,@Field24,@SalesCode,@BaseRetail,@BaseInvAmt,@CommPrice,@Price1,
@Price2,@StickerPrice,@TotInvAmt,@OptRetail,@OptInvAmt,@OptCost,@Options1,@Category,@Description,@Engine,@ModelType,@FTCode,@Wholesale,@Retail,@Draft,
@ERRORNUMBER,@ERRORSEVERITY,@ERRORTABLE,@ERRORSTATE,@ERRORPROCEDURE,@ERRORLINE,@errormessage,@FtpDate
END CATCH
--==========================================================================
-- INSERT INTO DMS_INVENTORY_AMOUNT (CHILD TABLE)
--==========================================================================
BEGIN TRY
INSERT INTO [dbo].[DMS_INVENTORY_AMOUNT]
DMSInventoryID,
AllInventoryAcctDollar,
OtherDollar,
PrimaryBookValue,
AmountDue,
LicenseFee,
CalculatedPrice,
OriginalCost,
BookValue,
TotalReturn,
TotalCost,
DlrAccessoryRetail,
DlrAccessoryCost,
DlrAccessoryDesc,
InternetPrice,
InventoryAcctDollar,
BestPrice,
Weight,
FloorPlan,
CodedCost,
InvoicePrice,
CostPack,
SalesCost,
HoldbackAmount,
ListPrice,
MSRP,
BaseRetail,
BaseInvAmt,
CommPrice,
Price1,
Price2,
StickerPrice,
TotInvAmt,
OptRetail,
OptInvAmt,
OptCost,
Wholesale,
Retail,
FtpDate
VALUES (
@InventoryID,
@AllInventoryAcctDollar,
@OtherDollar,
@PrimaryBookValue,
@AmountDue,
@LicenseFee,
@CalculatedPrice,
@OriginalCost,
@BookValue,
@TotalReturn,
@TotalCost,
@DlrAccessoryRetail,
@DlrAccessoryCost,
@DlrAccessoryDesc,
@InternetPrice,
@InventoryAcctDollar,
@BestPrice,
@Weight,
@FloorPlan,
@CodedCost,
@InvoicePrice,
@CostPack,
@SalesCost,
@HoldbackAmount,
@ListPrice,
@MSRP,
@BaseRetail,
@BaseInvAmt,
@CommPrice,
@Price1,
@Price2,
@StickerPrice,
@TotInvAmt,
@OptRetail,
@OptInvAmt,
@OptCost,
@Wholesale,
@Retail,
@FtpDate
END TRY
BEGIN CATCH
SELECT
@errornumber = ERROR_NUMBER(),
@errorseverity = ERROR_SEVERITY(),
@errortable = 'DMS_INVENTORY_AMOUNT',
@errorstate = ERROR_STATE(),
@errorprocedure = ERROR_PROCEDURE(),
@errorline = ERROR_LINE(),
@errormessage = ERROR_MESSAGE();
--==========================================================================
-- INSERT ERRORS INTO DMSLOG_INVENTORY_ERROR
--==========================================================================
EXEC [SP_DMS_INVENTORY_ERROR] @FileType,@ACDealerID,@ClientDealerID,@DMSType,@StockNumber,@InventoryDate,@StockType,@DMSStatus,@InvoicePrice,@CostPack,
@SalesCost,@HoldbackAmount,@ListPrice,@MSRP,@LotLocation,@TagLine,@Certification,@CertificationNumber,@VehicleVIN,@VehicleYear,@VehicleMake,@VehicleModel,@VehicleModelCode,
@VehicleTrim,@VehicleSubTrimLevel,@Classification,@TypeCode,@VehicleMileage,@EngineCylinderCount,@TransmissionType,@VehicleExteriorColor,@VehicleInteriorColor,
@CreatedDate,@LastModifiedDate,@ModifiedFlag,@InteriorColorCode,@ExteriorColorCode,@PackageCode,@CodedCost,@Air,@OrderType,@AgeDays,@OutstandingRO,
@DlrAccessoryRetail,@DlrAccessoryCost,@DlrAccessoryDesc,@ModelDesc,@Memo1,@Memo2,@Weight,@FloorPlan,@Purchaser,@PurchasedFrom,@InternetPrice,
@InventoryAcctDollar,@VehicleType,@DealerAccessoryCode,@AllInventoryAcctDollar,@BestPrice,@InStock,@AccountingMake,@GasDiesel,@BookValue,
@FactoryAccessoryDescription,@TotalReturn,@TotalCost,@SS,@VehicleBody,@StandardEquipment,@Account,@CalculatedPrice,@OriginalCost,@AccessoryCore,
@OtherDollar,@PrimaryBookValue,@AmountDue,@LicenseFee,@ICompany,@InvenAcct,@Field23,@Field24,@SalesCode,@BaseRetail,@BaseInvAmt,@CommPrice,@Price1,
@Price2,@StickerPrice,@TotInvAmt,@OptRetail,@OptInvAmt,@OptCost,@Options1,@Category,@Description,@Engine,@ModelType,@FTCode,@Wholesale,@Retail,@Draft,
@ERRORNUMBER,@ERRORSEVERITY,@ERRORTABLE,@ERRORSTATE,@ERRORPROCEDURE,@ERRORLINE,@errormessage,@FtpDate
END CATCH
--==========================================================================
-- INSERT INTO DMS_INVENTORY_VEHICLE (CHILD TABLE)
--==========================================================================
BEGIN TRY
INSERT INTO [dbo].[DMS_INVENTORY_VEHICLE]
DMSInventoryID,
InteriorColorCode,
ExteriorColorCode,
Air,
ModelDesc,
VehicleType,
VehicleVIN,
VehicleYear,
VehicleMake,
VehicleModel,
VehicleModelCode,
VehicleTrim,
VehicleSubTrimLevel,
Classification,
TypeCode,
VehicleMileage,
FtpDate,
EngineCylinderCount
VALUES (
@InventoryID,
@InteriorColorCode,
@ExteriorColorCode,
@Air,
@ModelDesc,
@VehicleType,
@VehicleVIN,
@VehicleYear,
@VehicleMake,
@VehicleModel,
@VehicleModelCode,
@VehicleTrim,
@VehicleSubTrimLevel,
@Classification,
@TypeCode,
@VehicleMileage,
@FtpDate,
@EngineCylinderCount
END TRY
BEGIN CATCH
SELECT
@errornumber = ERROR_NUMBER(),
@errorseverity = ERROR_SEVERITY(),
@errortable = 'DMS_INVENTORY_VEHICLE',
@errorstate = ERROR_STATE(),
@errorprocedure = ERROR_PROCEDURE(),
@errorline = ERROR_LINE(),
@errormessage = ERROR_MESSAGE();
--==========================================================================
-- INSERT ERRORS INTO DMSLOG_INVENTORY_ERROR
--==========================================================================
EXEC [SP_DMS_INVENTORY_ERROR] @FileType,@ACDealerID,@ClientDealerID,@DMSType,@StockNumber,@InventoryDate,@StockType,@DMSStatus,@InvoicePrice,@CostPack,
@SalesCost,@HoldbackAmount,@ListPrice,@MSRP,@LotLocation,@TagLine,@Certification,@CertificationNumber,@VehicleVIN,@VehicleYear,@VehicleMake,@VehicleModel,@VehicleModelCode,
@VehicleTrim,@VehicleSubTrimLevel,@Classification,@TypeCode,@VehicleMileage,@EngineCylinderCount,@TransmissionType,@VehicleExteriorColor,@VehicleInteriorColor,
@CreatedDate,@LastModifiedDate,@ModifiedFlag,@InteriorColorCode,@ExteriorColorCode,@PackageCode,@CodedCost,@Air,@OrderType,@AgeDays,@OutstandingRO,
@DlrAccessoryRetail,@DlrAccessoryCost,@DlrAccessoryDesc,@ModelDesc,@Memo1,@Memo2,@Weight,@FloorPlan,@Purchaser,@PurchasedFrom,@InternetPrice,
@InventoryAcctDollar,@VehicleType,@DealerAccessoryCode,@AllInventoryAcctDollar,@BestPrice,@InStock,@AccountingMake,@GasDiesel,@BookValue,
@FactoryAccessoryDescription,@TotalReturn,@TotalCost,@SS,@VehicleBody,@StandardEquipment,@Account,@CalculatedPrice,@OriginalCost,@AccessoryCore,
@OtherDollar,@PrimaryBookValue,@AmountDue,@LicenseFee,@ICompany,@InvenAcct,@Field23,@Field24,@SalesCode,@BaseRetail,@BaseInvAmt,@CommPrice,@Price1,
@Price2,@StickerPrice,@TotInvAmt,@OptRetail,@OptInvAmt,@OptCost,@Options1,@Category,@Description,@Engine,@ModelType,@FTCode,@Wholesale,@Retail,@Draft,
@ERRORNUMBER,@ERRORSEVERITY,@ERRORTABLE,@ERRORSTATE,@ERRORPROCEDURE,@ERRORLINE,@errormessage,@FtpDate
END CATCH
--==========================================================================
-- MOVE CURSUR TO NEXT RECORD
--==========================================================================
FETCH NEXT FROM Inventory_Cursor
INTO @FileType ,
@ACDealerID ,
@ClientDealerID ,
@DMSType ,
@StockNumber ,
@InventoryDate ,
@StockType ,
@DMSStatus ,
@InvoicePrice ,
@CostPack ,
@SalesCost ,
@HoldbackAmount ,
@ListPrice ,
@MSRP ,
@LotLocation ,
@TagLine ,
@Certification ,
@CertificationNumber ,
@VehicleVIN ,
@VehicleYear ,
@VehicleMake ,
@VehicleModel ,
@VehicleModelCode ,
@VehicleTrim ,
@VehicleSubTrimLevel ,
@Classification ,
@TypeCode ,
@VehicleMileage ,
@EngineCylinderCount ,
@TransmissionType ,
@VehicleExteriorColor ,
@VehicleInteriorColor ,
@CreatedDate ,
@LastModifiedDate ,
@ModifiedFlag ,
@InteriorColorCode ,
@ExteriorColorCode ,
@PackageCode ,
@CodedCost ,
@Air ,
@OrderType ,
@AgeDays ,
@OutstandingRO ,
@DlrAccessoryRetail ,
@DlrAccessoryCost ,
@DlrAccessoryDesc ,
@ModelDesc ,
@Memo1 ,
@Memo2 ,
@Weight ,
@FloorPlan ,
@Purchaser ,
@PurchasedFrom ,
@InternetPrice ,
@InventoryAcctDollar ,
@VehicleType ,
@DealerAccessoryCode ,
@AllInventoryAcctDollar ,
@BestPrice ,
@InStock ,
@AccountingMake ,
@GasDiesel ,
@BookValue ,
@FactoryAccessoryDescription ,
@TotalReturn ,
@TotalCost ,
@SS ,
@VehicleBody ,
@StandardEquipment ,
@Account ,
@CalculatedPrice ,
@OriginalCost ,
@AccessoryCore ,
@OtherDollar ,
@PrimaryBookValue ,
@AmountDue ,
@LicenseFee ,
@ICompany ,
@InvenAcct ,
@Field23 ,
@Field24 ,
@SalesCode ,
@BaseRetail ,
@BaseInvAmt ,
@CommPrice ,
@Price1 ,
@Price2 ,
@StickerPrice ,
@TotInvAmt ,
@OptRetail ,
@OptInvAmt ,
@OptCost ,
@Options1 ,
@Category ,
@Description ,
@Engine ,
@ModelType ,
@FTCode ,
@Wholesale ,
@Retail ,
@Draft ,
@flatfile_createddate,
@FtpDate;
END
CLOSE Inventory_Cursor;
DEALLOCATE Inventory_Cursor;
SET ANSI_PADDING OFF
END
Arunraj KumarThank you.
And another question if the data is already there in the child table if i try to load alone it must delete the old data in the child tablee and need to get load the new data and
How to do this ?
Arunraj Kumar
You can do that with an IF EXISTS condition
IF EXISTS (SELECT 1
FROM YourChildTable c
INNER JOIn @temptable t
ON c.Bkey1 = t.Bkey1
AND c.Bkey2 = t.Bkey2
DELETE t
FROM YourChildTable c
INNER JOIn @temptable t
ON c.Bkey1 = t.Bkey1
AND c.Bkey2 = t.Bkey2
INSERT INTO YourChildTable
where Bkey1,Bkey2 etc forms the business key of the table
Please Mark This As Answer if it solved your issue
Please Vote This As Helpful if it helps to solve your issue
Visakh
My Wiki User Page
My MSDN Page
My Personal Blog
My Facebook Page
Maybe you are looking for
-
I own a Zen Vison: M and am wanting a speaker system for my player
I know there aren't any docking speaker systems for them yet, and I honestly doubt there will be any real soon. So what would be the best way to go? My X girlfriend had an I-Pod (poooo) and she had this speaker system. http://www.alteclansing.com/pro
-
How to get bttoken in SAP BI 4.1 SP3 ?
Hi Experts, Can anyone tell me how to get bttoken in BI4.1 SP3? In BI4.0 we used "CafParameters.getFormTags()" , this is not working in BI4.1. Thanks in advance. -Deepa
-
Looking for compatible external dvd-r writer
have a late 2009 27" imac, running osx 10.6.8; internal optic drive is not working (have been trying to burn dvd-r of photos/music for siblings), altho can still burn CD's. have gotten "medium write error." have repaired permissions on HD. have tr
-
Exception while passing null as param in custom tag
Hi, I am using Oracle 10g AS(10.1.2). In my j2ee application,while passing NULL as parameter in custom tags, i am getting exception. But it was working fine with oracle 9i as. for example: This is my code in jsp: <% String str =null; %> <test:getInfo
-
Internal model vs external model
Hey, Internal model - the model that reflect the database model (may be hibernate). External model - the model that expose to the word, like UI and web services. My question: How close (in your application) the internal model to the external model? D