How successful is the junk filter?

For quite a time I was very proud of the way the junk filter seemed to get rid of mail that had found its way past the server's filter, but recently I seem to get more and more junk. One of the typical problems that beats the filter is the use of random letters to stand for a username (eg. fgfsjdfhsk). Is there no programming that can put an end to this?

Is there no programming that can put an end to this?
Yes, there is - you should take a look at JunkMatcher - it integrates with Mail and if you set it up correctly to match your needs, it will be extremely efficient in catching spam (I get a false negative about once in two months and I do get a lot of spam...)
http://junkmatcher.sourceforge.net
Andreas

Similar Messages

  • How to call the PS filter in my own MFC PlugIn

    There are several filters in PS that I use frequently.But it's so trouble to find them one by one.I want to write a plugin so that I can see all the filters I want in the same interface.I try it.But when I called filter in my plugin,it always told me that something was wrong and the plugin can't do anything.Can anybody tell me how to call the PS filter in MFC Plugin.My codes that called filter was in the follow.I don't know where is wrong.(ps:My english is so poor.....I don't know whether there are some syntax error.Sorry.)
    PIActionDescriptor test = NULL;
      SPErr error = kSPNoError;
      PIActionDescriptor result = NULL;
      error = sPSActionDescriptor->Make(&test);
      sPSActionDescriptor->PutEnumerated(test,'GEfk','GEft','PstE');
      sPSActionDescriptor->PutInteger(test,keyEdgeThickness,2);
      sPSActionDescriptor->PutInteger(test,keyEdgeIntensity,6);
      sPSActionDescriptor->PutInteger(test,keyPosterization,2);
      error = sPSActionControl->Play(&result,eventPosterEdges,test,plugInDialogSilent);

    I'm sorry. But how can I selected the pixel layer in MFC. I use the codes in the follow. And it work excellent in the automation plugin. But it doesn't work in MFC plugin. How can I change it? Can you give me some advices?
    PIActionDescriptor desc00000000000000F8 = NULL;
    error = sPSActionDescriptor->Make(&desc00000000000000F8);
    if (error) goto returnError;
    PIActionReference ref0000000000000038 = NULL;
    error = sPSActionReference->Make(&ref0000000000000038);
    if (error) goto returnError;
    error = sPSActionReference->PutName(ref0000000000000038, classLayer, "Background");
    if (error) goto returnError;
    error = sPSActionDescriptor->PutReference(desc00000000000000F8, keyNull, ref0000000000000038);
    if (error) goto returnError;
    error = sPSActionDescriptor->PutBoolean(desc00000000000000F8, keyMakeVisible, false);
    if (error) goto returnError;
    error = sPSActionControl->Play(&result, eventSelect, desc00000000000000F8, plugInDialogSilent);
    if (error) goto returnError;

  • How to clean the junk files in iPhone 5S

    How to clean the junk files in iPhone 5S

    Howdy sdshiras,
    Welcome to Apple Support Communities.
    Take a look at the article linked below, it provides a lot of great information that you can use to identify content which is taking up storage space on your iPhone 5s.
    See how much storage you've used on your iPhone, iPad, and iPod touch - Apple Support
    Cheers,
    -Jason

  • My ipod went through the wash. how successful is the rice trick?

    my ipod went through the wash. how successful is the rice trick?

    not very.  It think your best bet is to let it air dry for several days and cross your fingers.

  • How do I get the junk filter on the MAC to also filter email on IPhone and IPad?

    I have a MAC, IPad and Iphone and am using Icloud to keep calenndars, photos and music up to date.  however, my email junk filter on the MAC doesn't filter via Icloud for email on the Ipad or Iphone.  It would be great while traveling to not waste time and effort deleting junk mail.
    thanks

    no.

  • How to use the size filter in Liquid?

    How does the "size" filter work in Liquid if the size of an array is zero. I would like to check if an array's size == 0 or if it is empty. Does the size filter output anything if the array is empty? If not, is there a better way to check if an array is empty? Thanks.
    {% if {{lastMinuteOpeningsApp | size}} == 0 %}
        <!-- Some HTML code here to run if the array is empty -->
    {% endif %}
    I really wish there were more/better examples on the BC documentation for Liquid.

    Hi Dean,
    Firstly - You do not need to do the braces inside the if:
    {% if {{lastMinuteOpeningsApp | size}} == 0 %}
    {% if lastMinuteOpeningsApp | size == 0 -%}
    Secondly, If you are accessing web app items, you do not access the webapp as you have.
    <pre>{{lastMinuteOpeningsApp | json }}</pre> Will get you the output of the web app liquid object. You will see the items actually inside "items"
    So your web app items would but items are not returned if there are no web app items - Have a look. With that you can just say if lastMinuteOpeningsApp.items. Size will only return the maximum number of items you have per pagination limit.

  • How to delete the Junk Data From Excel Sheet

    Dear ABAPers,
                I am uploading the Excel sheet from the Desktop to the SAP System. In the Internal table i am getting Unwanted Junk data's for Example '##########'.I am not getting this Junk data for all the times. i am getting it for Some times.How to ignore these junk data.
    Thanks & Regards,
    Ashok.

    Dear Friends,
                I communicated wrongly.I am very sorry for that.The Problem is I am getting All the Data into the internal table in addition to that lines i am getting the Junk data in the internal table at the end of the internal table.
    Excel Sheet
    L-1     21.10.2008     1110     888555444676001
    L-1     21.10.2008     1110     888555444676002
    L-1     21.10.2008     1110     888555444676003
    L-1     21.10.2008     1110     888555444676004
    Internal table
    L-1     21.10.2008     1110     888555444676001
    L-1     21.10.2008     1110     888555444676002
    L-1     21.10.2008     1110     888555444676003
    L-1     21.10.2008     1110     888555444676004
    Thanks & Regards,
    Ashok.

  • How to put the ratings filter back where it belongs?

    The 1.0 version suddenly moved the ratings filter away from the rest of the filters on the left-hand library column, and stuck it with the horizontal file browser at the bottom of the screen. I've tried and tried to drag the filter back into the vertical column, but it doesn't want to budge.
    The only problem is I hate the little scrolling thing at the bottom and always use Lightroom with it turned off.
    Why they split half of the filters into the library control panel (file name, date, etc.), and tacked on the other half (rating and flags) into the bottom panel is beyond me.

    Not "learning how...", just "learning too...". In other words, you can learn to like having it on all the time, and that was just one of three options I gave you.
    As for "an option like most everything else", none of the panels in LR are tear-off and relocatable like those in PS.
    I'm sorry you don't like this change. I hope I've explained why it's like it is. You don't have to agree with it but, if you are to use the program, you are going to have to choose one of the options I mentioned above.
    Lee Jay

  • How to fetch the junk values of a column and the column name in oracle

    Hello,
    Can anyone help me in writing a procedure/dynamic SQL to fetch the column where the junk values appears and its value. Eg: If emp table contains ID and Name columns, and ID column contains junk values, the result should be the Id column and the junk value/s. It should be dynamic because next time if the other column contains junk values(like $,%...), the query should display the other column too..
    Thanks in advance..

    Try this, I'm not sure if it'll help... and get some idea...
    try to modify it as per your requirement -
    select * from junk_vals;
    1     ranit1
    2#     ranit2
    3     ranit3
    4$     ranit@4
    5     ranit5
    6     r^anit6
    select 'ID', id, val from junk_vals
        where regexp_like(id,'[^a-zA-Z0-9]')
    UNION
    select 'VALUE', id, val from junk_vals
        where regexp_like(val,'[^a-zA-Z0-9]');
    -- "Output :"
    ID     2#     ranit2
    ID     4$     ranit@4
    VALUE     4$     ranit@4
    VALUE     6     r^anit6
    NOTE - I've considered anything other than Alphabets and Numbers as a Junk Value
    Edited by: ranit B on Jan 4, 2013 5:07 PM
    -- o/p added

  • How to set the right filter mode?

    Hi All,
    I have a few applications deployed in Tomcat 5.5.9 for which i need to control access.
    I have created a policy to which I have added a rule of type URL Policy Agent and added a few users as subjects.
    Now that the policy is in place, I tried to change the filter.mode property in AMAgent.properties file to all the possible options and I have noticed the following:
    filter.mode=NONE              Allows all users without authentication
    filter.mode=SSO_ONLY          Allows all users after authentication against DS
    filter.mode=URL_POLICY          Disallows authentic users also (HTTP 403 error)
    filter.mode=J2EE_POLICY          Allows all users after authentication against DS
    filter.mode=ALL                      Disallows authentic users also (HTTP 403 error)
    In my case all the observations except the J2EE_POLICY option work as required.
    I conclude this as a part of my understanding gained through the following:
    http://docs.sun.com/source/816-6884-10/chapter3.html#wp21908
    I have failed to understand why the J2EE_POLICY option allows users which are not included as subjects in the realm as authentic.
    I have also tried setting the com.sun.am.policy.agents.do_sso_only=false property but dint get things working as needed.
    Any help in this regard would be appreciated.
    Regards,
    Saiesh Nayak,
    Persistent Systems.

    J2ee_policy allows users which are not included as subjects in the realm because the policy agent actually doesn't validate the URL policies configured in AM, it just validate j2ee declarative security from your web application.
    So, as I suspect, if you don't have security constraints in your webapp, you won't enforce security.
    With URL_POLICY option, you will enable url policy evaluations as you configure it in Access Manager. So, in this case and in the ALL option case, check that the url policy is correctly configured, mainly the rule.
    You can enable debug.level=message instead of debug.level=error in AMAgent.properties in order to see what's happening. When you enable message level debug, the agent will create some debug log files, please take a look on the amFilter and amWebPolicy log files.
    Hope it helps.

  • How to Install the Extract Filter in Photoshop CS5

    Extract filter is not available in Photoshop CS5...I guess..however while searching i found somthing http://www.egurudev.com/2011/09/install-the-extract-filter-in-photoshop-cs5.html
    Can somebody kindly confirm if this method works...if not please suggest some other alternative..thanks!!

    Check this out : http://feedback.photoshop.com/photoshop_family/topics/where_did_the_extract_filter_go_in_p hotoshop_cs5-12e7w3

  • Can I get the junk filter to ignore Gmail's 'spam' folder?

    I could put the junk into the 'spam' folder, but having two categories is really useful. Gmail picks up penile enlargement and mail order brides, while 'junk' has things that require decision. Can I stop 'junk' looking in 'spam'?

    use this add-on to make two junk folders https://addons.mozilla.org/en-US/thunderbird/addon/folderflags/

  • How to add the Cloud Filter to Custom Shapes?

    Hello:                                                                                                Level: Newbie    OS: Windows 7 64bit    Ps CS6
    I am trying to make a sun. I used the elliptical marquee and was able to add the filter > render > coulds w/no problem
    However, when I draw a custom shape and try to use the cloud filter it fills the whole layer not just the shape.
    I've tried several things but nothing has worked.
    Also, a box pops up that says the layer must be rasterized before using the cloud filter and then it fills the whole canvas/layer.
    Any ideas? Thank you for your time

    Photoshop filters operate on raster images (i.e. pixels) only. A couple of ways to get the necessary raster from a Shape Layer:
    1. Rasterize the SL, permanently converting it to a regular pixels layer (although you could keep a hidden copy of the SL in case you wanted to return to it).
    2. Convert the SL to a Smart Object which non-destructively encapsulates the SL and provides a raster representation on which filters can operate. This is advantageous in that you can edit the contained Shape Layer at any time, you can non-destructively transform (e.g. stretch or warp) the SO as many times as you want, and filters can be attached as non-destructive re-editable Smart Filters.
    For Clouds to be visible in only the existing pixels and not the empty region of a layer, make a mask for the layer: target the layer, Ctrl-click on its thumbnail to get a marquee of its pixels then click the Add Mask button at bottom of Layers panel. That's what I did below, but the mask could have been used as a Smart Filters mask which you can see as a white thumbnail.

  • How to Delete the Junk data in Transformation Routines

    Hi,
    I had scenario like infoobject for 0CUSTOMER master data is bringing the values
    C123456_RECEIPTS.
    C12345_RECEIPTS.
    So when i extract the data from R/3 for this 0CUSTOMER master data it is bringing the SOME JUNK DATA
    I would require delete the C12345_RECIEPTS it should allow only C123456_RECIEPTS.
    I have to do in the routines for the deletion of this.
    Requesting send some sample code on how to delete it the BI 7.

    Hello,
    If the data is like after every C5* or C6* there is an underscroll sign (_), then below code will work in start routine:
    Data: wa_source_package like line of source_package,
              itab_sp type standard table of tys_SC_1,
              a(6) type c,
              b(10) type c.
    loop at source_package into wa_source_package.
       split wa_source_package at '_' into a and b.
       if strlen( a ) = 7.
          append wa_source_package to itab_sp.
       endif.
    endloop.
    refresh source_package.
    source_package = itab_sp.
    Regards,
    Shashank

  • How to clear the previous  filter text when creating new record??

    Dear All,
    my question is i i created table having filter and sorting.
    when i m searching data through filter text data is coming but i want to clear that text(filter text) when i am creating new record.
    for my case when i am creating new record all blank field is coming but in that filter text box previous data is coming which one i was searching.
    but i need when i will create a new record tat filter text should be clear.
    Thanks
    Damby

    Damby, please tell us your jdev version.
    Check my blog http://tompeez.wordpress.com/2011/10/29/jdev-how-to-reset-a-filter-on-an-aftable/ you can add this to the button you use to create the new record.
    Timo

Maybe you are looking for