How sum values on crystal report?

hi,
i want sum same values on my report for example
for display like this
page 1
hi1 = 100
hi2 = 150
hi3 = 300
hi1 = 100
hi2 = 150
hi3 = 300
hi1 = 100
total of page=1200
page2 & final page
hi2 = 150
hi3 = 300
hi1 = 100
hi2 = 150
hi3 = 300
total of all = 2200
i have tryed this:
sum({total.count})
but i have the total of values in first page the solution is using this line
if PageNumber<>TotalPageCount then
but even using this i get the total of values on first page 
how can i do that?
anyone?
thanks a lot for your help

You should be able to just drag your running total to the page footer to get it to display for each page.

Similar Messages

  • How to assign a variable value to crystal report viewer formula with CR2008

    Hi ,
    I am using crystal reports 2008 and i am not able to find how to assign  variable value  to crystal report viewer formula.
    In CR 8.5 , i used to have crystalreport1.Formulas(0) = variable1
                                             crystalreport1.Formulas(1) = variable2
    but, i don't find similar kind  in crystal reports 2008.
    How can i achieve the same functionality using crystal reports 2008.
    Thanks in Advance
    Regards,
    Ramnath

    Hi,
    Can i anyone help me out with this.
    I am generating crystal reports in vb6 using CR 8.5 and vb6 and below is the code snippet for the same
    CrystalReport1.Formulas(0) = "PrintTitle= '" & strMyTitle & "'"
    CrystalReport1.Formulas(1) = "FromDate= '" & MskFromDate.Text & "'"
    CrystalReport1.Formulas(2) = "ToDate= '" & MskToDate.Text & "'"
    Please let me know how the same functionality can be achieved in VB.Net using Crsytal reports 2008
    Any code snippet would be of great Help.
    Thanks in Adnvance.
    Ramnath

  • Passing Value from Crystal Report (special function) to Business View parameter

    Friends,
                 Í have a scenario where i need to pass value from Crystal Report to a Business view's parameter.
    Eg : CurrentCEUsername (func in crystal report)-- gives login user  which i should pass to parameter in a Business view (used in the same report).
    Will be able to explain more if required.
    Thanks in Advance,
    Bharath

    I guess you got the picture wrong.  User_id is not a report_level parameter .
    In Data Foundation, below query is used..
    select Acc_Number, Account_Group,User_id  from Accounts where user_id={?User_id}
    where in {?User_id}  is the BV parameter...
    The Filter was a solution. But it takes long time to Query all the data from DB and then filter at BV level.
    How do i pass the CurrentCEUsername to {?User_id}
    Value should ve CurrentCEusername always. so that query will be
    select Acc_Number, Account_Group,User_id  from Accounts where user_id=CurrentCEusername
    It will restrict the data pulled from DB to BV .. right?

  • Range Value in Crystal Report

    Hello Experts,
    I want to include a range value in crystal report. Currently the report is used for printing AR invoice with one invoice at time, wherein user inputs invoice number which he wants to print. I want to include invoice number range in the report, but that option is disabled in the parameter field. In present report Invoice number is taken as static value and then connected to db to get the data of that AR invoice number, advise how to
    - Activate "Allow Range Value option"
    - How to set up the multiple invoice printing
    Setup details : SBO 2007B, CR 2008, SQL 2005
    Regards
    Deepak

    Hi Deepak........
    Sure........
    Hope your query report is perfect and for Parameter Range goto Report Expert in Tool Bar of the Crystal Report you can find it by yellow coloured Flask Symbol. Click on that and just define the range of parameters........
    Regards,
    Rahul

  • How to Call a Crystal Report from Form 6i?

    Dear All,
    Can anybody tell me how to call a crystal report, designed using Crystal Report 9, in form 6i? I tried one solution by using the host command but it was not working properly. The code I was tried is like:
         f_name varchar2(240);
         f_name :='C:\Program Files\Crystal Decisions\Crystal Reports 9\crw32.exe D:\Form16\Form16_Rep\bin\Debug\Form_16_character_emp.rpt';
                   host(f_name);
    This open the crystal report in design view. So how we call a report which run automatically like in .Net. How to pass the connection info of the database schema?
    Thanks & Regards
    Sunil

    Hi
    First see the built in run_product function.
    You can create a parameter list, add the
    "MAXIMIZE" paramter in it and then call your
    report with run_product passing your parameter list in it.
    hence the called report will be maximized.
    null

  • How to create a crystal Report using C# and SQL Server

    Hi, im new in creating crystal report using SQL Server, and im making a project.. and could someone help me how to connect your .sdf (SQL Server File) from the bin to your crystal report? thanks a lot.. i followed some instructions like this one (https://social.msdn.microsoft.com/Forums/vstudio/en-US/48c0dd48-5b23-49da-8601-878f8406125e/how-to-create-a-crystal-report-using-sql-server-visual-c?referrer=http://social.msdn.microsoft.com/Forums/vstudio/en-US/48c0dd48-5b23-49da-8601-878f8406125e/how-to-create-a-crystal-report-using-sql-server-visual-c?referrer=http://social.msdn.microsoft.com/Forums/vstudio/en-US/48c0dd48-5b23-49da-8601-878f8406125e/how-to-create-a-crystal-report-using-sql-server-visual-c?referrer=http://social.msdn.microsoft.com/Forums/vstudio/en-US/48c0dd48-5b23-49da-8601-878f8406125e/how-to-create-a-crystal-report-using-sql-server-visual-c?forum=csharpgeneral)
    but i got an error on the adding of server name and database portion.. thanks a lot in advance

    Hello,
    Crystal Reports are supported on
    http://scn.sap.com/community/crystal-reports.
    Karl
    When you see answers and helpful posts, please click Vote As Helpful, Propose As Answer, and/or Mark As Answer.
    My Blog: Unlock PowerShell
    My Book:
    Windows PowerShell 2.0 Bible
    My E-mail: -join ('6F6C646B61726C406F75746C6F6F6B2E636F6D'-split'(?<=\G.{2})'|%{if($_){[char][int]"0x$_"}})

  • How to get a Crystal report as an iview in Portal

    Hi,
    Please let me know how to get a crystal report to Portal.
    Regards,
    Pradeep

    Hi,
    I used URL iview option to get the crystal report in portal and am able to view it. Thank you all for your inputs.
    But as of now SSO is not configured between BOE and BI system, so when i click on URL iview initially it asks me for credentials to BOE InfoView and after entering that it again asks for BI login as the data has to be picked from BI server.
    We are going to configure SSO mean while i just want to know whether it is possible to pass the id and passw as parameters to this url iview, if so what are the parameter id's i need to maintain to pass id and passw.
    Let me know on this.
    Regards,
    Pradeep
    Edited by: pradeep balam on Jul 29, 2011 8:34 AM

  • How to open the crystal reports 2008 in CRYSTAL REPORTS ENTERPRISE 4.0

    Hi All,
    Can you please let me know how can migrated the crystal reports from BO XI 3.1 to SAP BO 4.1 and after migrate how to open the crystal reports 2008 in CRYSTAL REPORTS ENTERPRISE 4.0.
    can you please help on this and if document please share.
    Thanks,
    Rajesh

    Use the upgrade management tool to move from 3.1 reports to BO 4.1. After migration, open the report in crystal enterprise 4.0, you will get a message saying that the report will be converted to latest version, will not be able to view from older version after converting. (Similar words- not sure exact words).

  • How to publish a Crystal Report in Business One

    Hi
    Please can anyone tell me how I publish a Crystal report (which is now inbuilt in SAP B1) so it is available to all users?  I have full administrator/manager user rights. I have so far created the report and saved it to my SAP server machine on it's C:drive.
    Thank you very much for any help and info.
    Matt

    Hi, I worked out how to do it. I had to first enable the Crystal Add on from within SAP and then open the Crystal Reports Administration menu under Administration and then select "Manage Crystal Reports". From there you can browse to the report you have created and select the module for where you want it to appear under in SAP.
    Edited by: matth76 on Jun 25, 2009 4:14 PM

  • How Can I call Crystal report from R3?

    Hi experts,
      How Can I call Crystal report from R3?

    Hi Bill,
    Can you please be specific and could you please provide the steps
    Thank you

  • Sum duplicate values in crystal reports XI

    Post Author: Stuart
    CA Forum: Formula
    Hi All
    As you probably know I'm very new to crystal reports.
    Apologies but it seems my previous question was unclear as no one has been able to respond.
    What I need is a formula that can recognise a name in field1 is a duplicate and then the amount in field2 for both rows should be sum together thus creating only one row with the same name in field1 but with the two values sum in field2.
    I've had a look around and I can see how to remove the duplicates but I want to sum the duplicates into one row not two or three, etc.
    Hope to hear from you,
    Kind Regards,
    Stuart

    Post Author: Stuart
    CA Forum: Formula
    Hi
    Thanks for your assistance,
    There could be several duplicates,
    My data will look like as follows;
    Firstname    Surname     Amount
    Thomas       Brown        $100
    Thomas       Brown        $200
    Andrew       Slater          $400
    Andrew       Brown          $100
    Kelly           Smith         $50
    With the formula which I hope you can help me with I would expect the results to be;
    Firstname    Surname     Amount
    Thomas       Brown        $300
    Andrew       Slater          $400
    Andrew       Brown          $100
    Kelly           Smith         $50
    Notice in the above the first and surname have to be unique in order to sum.
    There are alot more names hence I cannot list everything,
    hope you can help me further,
    Kind Regards,
    Stuart

  • How to set Default DateTime values in Crystal Reports 2008

    Hi All,
    I'm using Crystal Reports 2008. I have two fields FromDate and ToDate in reports. While running report, FromDate field should be displayed with CurrentDate + 00:00:00 in the UI and for ToDate it should be displayed with CurrentDate + 23:59:59 format.
    I have tried the below things, But still I want to set CurrentDate + 00:00:00 time in DateTime field.
    "In CR 2008 you would set the time portion to 00:00:00 in this way:
    1) Edit the date/time parameter and look for the 'Default Value' option; it would be blank
    2) Set this to 00:00:00
    This would default the calendar to 12/30/1899 00:00:00. The only worry here is, when you click on the calendar icon you would be presented with the calendar for the year 1899 and it is painstaking to scroll all the way to the current year."
    I found one solution in SAP forum and I have added the below lines in Record Selection formula,
    {@FromDate} = date(@CurrentDate)+time(00,00,00)
    {@ToDate} = date(@CurrentDate)+time(23,59,59)
    When I run the report, I still getting the empty values in the input parameters screen.
    Am I missing anything? Kindly help
    Thanks,
    Ramesh Kumar G.

    See the following for samples:
    Java (Crystal Reports for Eclipse) SDK - Business Intelligence (BusinessObjects) - SCN Wiki
    BusinessObjects Enterprise / SAP BusinessObjects Business Intelligence Platform 4.x Java SDK Applications
    Business Objects / BI Unmanaged Java RAS SDK Sample Applications
    Developer Help Files:
    Crystal Reports SDK
    - Ludek
    Senior Support Engineer AGS Product Support, Global Support Center Canada
    Follow us on Twitter

  • Passing formula values to Crystal Reports from c#

    in an old vb 6 application we used to be able to call a function called PESetFomula in the Crystal Reports viewer and pass it the name of the parameter and the value.
    How do we do that now using Crystal Reports for VS 2013. I don't mean to set the criteria just to pass over parameters and values.
    Bill

    Hi Bill,
    Moving the thread to Crystal reports for Visual Studio Space.
    Using the .net SDK you could use the ReportDocument class to pass the parameter values to the report.
    See the sample applications here:
    http://scn.sap.com/docs/DOC-6929
    http://wiki.scn.sap.com/wiki/display/BOBJ/Crystal+Reports+for+.NET+SDK+Samples
    The developer guide and the API reference guide is here.
    http://scn.sap.com/docs/DOC-7824
    - Bhushan
    Senior Engineer
    SAP Active Global Support
    Follow us on Twitter
    Got Enhancement ideas? Try the SAP Idea Place
    Getting started and moving ahead with Crystal Reports .NET applications.

  • Suppressing NuLL values in Crystal Report

    Hi....
    I m facing a problem,i use asp.net and  I have designed a Crystal Report.I had to place Text Objects in the the details section along with the corresponding Records from Database as per the Reports Design needed. Now i want that the NULL values in the report should be suppressed and should be disappeared  along with the static Text Objects. Like as it happens in Grid view in ASP .net
    Please Help me to solve this issue..
    Thank you

    I think i have been able to do it with little compliated suppress logic.
    When i design the report this is how it looks in design mode:
    Line1  Field1
    Line2  Field2
    Line3  Field3
    and when Field 2 is null or contains a blank string the output should look like:
    Line1  Field1
    Line3  Field3
    1. Initially just design the text fields and db fields without any suppress.
    2. Check Suppress for Line 2 and use the formula: isnull({Table.Field2}) . Do nothing to Field2. This should suppress Line2 when Field2 is null, you can also add StrCmp({Table.Field2}, "") = 0 for checking blank strings.
    3. Now copy Object Line3 and Field3 and place on top of Line2 and Field2 respectively so that their positions match. Let these newly copied objects be Line3_1 and Field3_1 respectively.
    4. Line3_1 and Field3_1 should be suppressed if Field2 contains a non null value. So for both of them Click Suppress checkbox and add the following in the format formula editor not isnull({Table.Field2})
    5. If Line3_1 and Field3_1 are visible = Field2 is null\empty -> Line3 and Field3 should be suppressed or the output would be like:
    Line1 Field1
    Line3 Field3
    Line3 Field3
    So to remove the duplicate:
    For both of them Click Suppress checkbox and add the following in the format formula editor isnull({Table.Field2})
    Hope this helps. I will see if I can attach a sample report based on xtreme here.

  • How to add in crystal report

    hi i am developing a web application , i am using crystal report plugin in eclipse europa editor .
    my problem is that , there is a table which has a date colunm and i am adding all the dates together by using
    sum(DateDiff("yyyy",{Birth_date},{death_date)) as a function
    i am getting the data by record filter but above formula showing me only result for the last record , what happening to other records , i don't know.
    so please guide me .
    Thanks in advance...........                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                       

    Hi Rizwan,
    You can't with the report itself because once the refresh is complete it requires a full refresh to update any page. And there is no option to for example refresh just the subreport.
    RAS SDK has samples on how to add subreports, see the OverView tab for a link to the samples, but it still requires a refresh to be called.
    One way may be to use Subreports on Demand, URL's to another report.... Each subreport would run individually without refreshing the main report. It would like a Table Of Contents report though.
    So to be clear, adding pages is the same thing as adding more data. Problem is most of the data needs to be complete so that summaries and running totals etc. type of objects require the data to be complete to be able to render each page.
    So why do you need to do this? Can you explain your workflow?
    Don

Maybe you are looking for