How t o make data in file as tab delimited..

Hi frndz,
  How to make data in file as tab delimited.

For tab delimiting pl use the following snippet..I guess you are aware of the rest of the stuff..
data: w_tab type c value cl_abap_char_utilities=>horizontal_tab,
      rec_file type string.
concatenate <fld1> <fld2> ...<fldn> into rec_file
               separated by w_tab.
~Suresh

Similar Messages

  • Transfer data in unix with tab-delimited

    Hi,
    How can we transfer data to unix with tab-delimited? I have incoming file with tab-delimited and want to copy as backup file in another folder in unix. When I read the incoming file, tab separator is translated into '#' so when I do transfer data to the backup folder, the file contains '#'.
    Is there a way to transfer data in tab-delimited?
    thank you
    alia

    try to use delimiter cl_abap_char_utilities=>HORIZONTAL_TAB.
    here is a piece of code:
    REPORT  ztestfile                               .
    DATA: BEGIN OF gt_file_out OCCURS 0,
            filed(2000),
          END OF gt_file_out.
    START-OF-SELECTION.
      DATA: lv_file_out LIKE filename-fileextern.
      CONCATENATE 'Hello' 'World' INTO gt_file_out SEPARATED
        BY cl_abap_char_utilities=>horizontal_tab.
      APPEND gt_file_out.
      lv_file_out = '
    XXXX\XXXX\mytest1.txt'.
      OPEN DATASET lv_file_out FOR OUTPUT IN TEXT MODE ENCODING DEFAULT.
      LOOP AT gt_file_out.
        TRANSFER gt_file_out TO lv_file_out.
      ENDLOOP.
      CLOSE DATASET lv_file_out.
    Message was edited by: joseph fryda

  • How to upload the data from excel(3 tabs) file to sap environment

    Hi all,
    This is Mahesh.
    how to upload the data from excel(3 tabs) file to sap environment (internal tables) while doing bdc.

    Hi,
    The FM 'ALSM_EXCEL_TO_INTERNAL_TABLE' makes it possible to load a worksheet into an internal table in ABAP.
    However, if you want to get the data from several worksheets, I think you are stuck with OLE access to your Excel Workbook...
    You can find a solution for 2 worksheets in this post :
    TO UPLOAD DATA FROM 2 EXCEL SHEETS INTO TWO INTERNAL TABLES
    I think you can easily modify it to handle any number of worksheets.
    Hope it helps !
    Best regards,
    Guillaume

  • How can I make a PDF file from each folders with layers, where each page is a each folder?

    How can I make a PDF file from each folders with layers, where each page is a each folder?

    I found an answer to my own question. A work around of sorts.
    Download Photoshop Elements 6 for Macintosh. With PSE6 I made a slide show with 550 images 1920x1200, without thumbs. I ran into one problem making the slide show. My images contained 4 images which had not ben created by Photoshop and could not be included in the slide show. Opening the images in Photoshop CS4 and re-saving them still did not make then acceptable. Not a big deal. I probably could have fixed the four images by stripping all EXIF data before opening them in Photoshop. BTW, PSE6 made the slide show in demo mode.
    I hope the bug in Photoshop CS4 will be fixed in Photoshop CS5.

  • How can I make an ant file that launches an AS project app in a debug flash player that traces to the flex console?

    How can I make an ant file that launches an AS project app in a debug flash player that traces to the flex console?
    Basically I like the control over the compiling process that I get by using Ant - but I really want traces to come up immediately without having to switch contexts.
    I have an ant file that successfully launches a swf in the flashplayer - but I don't know how to make the flex console start displaying the trace output. I assume that I will have to point it to the appropriate trace output file - but I am not sure how to have ant even address the console.  Is this possible?
    Here is the the target node from my ANT file:
        <target name="launch">
            <exec executable="${FLASHPLAYER_EXE}" errorproperty="trace.output">
                <arg line="'${DEPLOY_DIR}\test.swf'" />
            </exec>
        </target>
    Thanks for any thoughts, or alternatives!

    For the record, I ended up using Logwatcher - it worked perfectly.
    http://graysky.sourceforge.net/

  • How can I make a .gif file work in Keynote on my iPad Mini?

    How can I make a .gif file work in Keynote on my iPad Mini?
    Have saved a .gif file to my Camera Roll, and it works fine as I have checked it through mail. When I import it into Keynote however it won't animate. Even when I play slide. Any suggestions?

    The can use apps such as Apple's Pages app for Word documents and Numbers for Excel spreadsheets, and from third-parties apps such as Documents To Go ('premium' version) and QuickOffice Pro HD.

  • How can i make shorten systemlog files and joblog files on OS

    Hello
    How can i make shorten systemlog files and joblog files on OS

    Hello Jan,
    You can limit the size of system log.
    The size of the application server's System Log is determined by the
    following SAP profile parameters. Once the current System Log reaches
    the maximum file size, it gets moved to the old_file and and a new
    System Log file gets created. The number of past days messages in the
    System Log depends on the amount/activity of System Log messages and the
    max file size. Once messages get rolled off the current and old files,
    they are no longer retrievable.
    rslg/local/file /usr/sap/<SID>/D*/log/SLOG<SYSNO>
    rslg/local/old_file /usr/sap/<SID>/D*/log/SLOGO<SYSNO>
    rslg/max_diskspace/local 1000000
    rslg/central/file /usr/sap/<SID>/SYS/global/SLOGJ
    rslg/central/old_file /usr/sap/<SID>/SYS/global/SLOGJO
    rslg/max_diskspace/central
    Refer to http://help.sap.com/saphelp_nw70/helpdata/EN/c7/69bcbaf36611d3a6510000e835363f/content.htm
    for explanation of profile parameters.you can reduce the size of system log using rslg/max_diskspace_local and rslg/max_diskspace_central
    But you can't reduce the size of job log files on OS
    Rohit

  • How do I make a PDF file smaller in size?

    How do I make a PDF file smaller in size?

    Do you have images on your PDF? You might want to use smaller images (smaller in file size and not in necessarely in image dimension).
    I'm not sure what else could be done to make your PDF form smaller. How big is your form?
    Gen

  • How do I make a plot file for AutoCad to produce a PDF

    How do i make a plot file for AutoCad to produce a PDF

    Moving this discussion to the Creating, Editing, & Exporting PDFs forum.

  • How do i make a new file created appear in the Application Navigator?

    I am doing an extension to JDeveloper..How do i make the new file that the user has created to appear in the Application Navigator?
    What methods can i use?
    These are my codes...but it does not work still...
    File file = new File(dir ,fileName);
    file.createNewFile();
    FileWriter fw = new FileWriter(file, false );
    PrintWriter pw = new PrintWriter( fw, true );
    Workspace workspace = ctx.getWorkspace();
    java.net.URL projectURL = workspace.getActiveProjectURL();
    URL url = file.toURL();
    Node node = new Node(url);
    jpr.add(node, true);
    node.open();
    NavigatorManager.getWorkspaceNavigatorManager().openNavigator(ctx);
    ProjectNavigatorManager.getApplicationNavigatorManager().openNavigator(ctx);
    EditorManager.getEditorManager().openDefaultEditorInFrame(node.getURL());

    If it's an IMAP type account then you should get an Edit button at the top of the list of folders that you currently have on your email account. If it's a POP type account then you won't get the Edit button, and you are limited to your existing folders

  • How can i make Distiller autoname file ( when exprting from other application?)

    hello everyone,
    i have been searching for a solution for a long time please help me >
    we have more than 100.000 docuents saved as pic on our network at work by using ( Laser Fiche). I wanted to save all files by using acrobat distiller but when i try to print a file i was prompted to enter a file name! but i don't want to... i want the distiller create a file name automatially.
    in the preferencesd i unchecked ( ask for PDF .. ) but the problem is that all files saved were overwritten because distiller was imporing the file name from Laser Fich!
    how can I make distiller ( autoname files like 0001 0002 0003 and so on) ?
    forgot to tell you that i am using acrobat version 5 ( and windows xp + laser fiche at work )
    thanks in advance

    thanks Bill@VT -
    it didn't work
    I opened the properiteis of the distiller and uncheck the ( prompt for the PDF file name) so that the distiller can save files automatically . it did but by overwriting the files because the original files in the LASER FICHE have same names so the distiller saved one file only by overwriting ....that's why i want to make distiller to name files when saving them ( the distiller are imorting the files from Laser fiche only but i want it to autoname them )
    i also opened distiller properites and unchecked the ( ask to replace existing PDF filename ) the distiller was always asking me to replace file ! and I can't do it this way because I have more than 100.000 docuents!
    sorry , I know this is a very difficult question
    but I would very happy if you can help me
    hank you
    Al

  • How do I make data from one Table flow into a separate Table

    How do I make data from one Table flow into a separate Table in iworks numbers?

    Great stuff Yvan,
    KOENIG Yvan wrote:
    Here you may see the way to transfer the contents of a column of Table A in a column of Table B
    I used two kinds of formulas.
    In the cell A2 of Table B
    the formula is :
    =Table A :: $B2
    It may be :
    =Table A :: $B
    Apply Fill Down
    Copy paste it in cell A1 which is in a header row.
    This formula does its duty but it’s not robust enough and will not survive to a Sort.
    This is why in B2, I inserted a more robust formula :
    =OFFSET(Table A :: $A$1,ROW()-1,2)
    You will find details about the functions used in Numbers User Guide delivered with every copy of iWork ‘08
    Yvan KOENIG (VALLAURIS, France) samedi 6 août 2011 17:45:22
    iMac 21”5, i7, 2.8 GHz, 4 Gbytes, 1 Tbytes, mac OS X 10.6.8 and 10.7.0
    My iDisk is : <http://public.me.com/koenigyvan>
    Please : Search for questions similar to your own before submitting them to the community
    To be the AW6 successor, iWork MUST integrate a TRUE DB, not a list organizer !
    The first suggestion was the simple answer I needed,
    Thank you

  • How to store xml data into file in xml format through java program?

    HI Friends,
    Please let me know
    How to store xml data into file in xml format through java program?
    thanks......
    can discuss further at messenger.....
    Avanish Kumar Singh
    Software Engineer,
    Samsung India Development Center,
    Bangalore--560001.
    [email protected]

    Hi i need to write the data from an XML file to a Microsoft SQL SErver database!
    i got a piece of code from the net which allows me to parse th file:
    import java.io.IOException;
    import org.xml.sax.*;
    import org.xml.sax.helpers.*;
    import org.apache.xerces.parsers.SAXParser;
    import java.lang.*;
    public class MySaxParser extends DefaultHandler
    private static int INDENT = 4;
    private static String attList = "";
    public static void main(String[] argv)
    if (argv.length != 1)
    System.out.println("Usage: java MySaxParser [URI]");
    System.exit(0);
    String uri = argv[0];
    try
    XMLReader parser = XMLReaderFactory.createXMLReader("org.apache.xerces.parsers.SAXParser");
    MySaxParser MySaxParserInstance = new MySaxParser();
    parser.setContentHandler(MySaxParserInstance);
    parser.parse(uri);
    catch(IOException ioe)
    ioe.printStackTrace();
    catch(SAXException saxe)
    saxe.printStackTrace();
    private int idx = 0;
    public void characters(char[] ch, int start, int length)
    throws SAXException
    String s = new String(ch, start, length);
    if (ch[0] == '\n')
    return;
    System.out.println(getIndent() + " Value: " + s);
    public void endDocument() throws SAXException
    idx -= INDENT;
    public void endElement(String uri, String localName, String qName) throws SAXException
    if (!attList.equals(""))
    System.out.println(getIndent() + " Attributes: " + attList);
    attList = "";
    System.out.println(getIndent() + "end document");
    idx -= INDENT;
    public void startDocument() throws SAXException
    idx += INDENT;
    public void startElement(String uri,
    String localName,
    String qName,
    Attributes attributes) throws SAXException
    idx += INDENT;
    System.out.println('\n' + getIndent() + "start element: " + localName);
    if (localName.compareTo("Machine") == 0)
    System.out.println("YES");
    if (attributes.getLength() > 0)
    idx += INDENT;
    for (int i = 0; i < attributes.getLength(); i++)
    attList = attList + attributes.getLocalName(i) + " = " + attributes.getValue(i);
    if (i < (attributes.getLength() - 1))
    attList = attList + ", ";
    idx-= INDENT;
    private String getIndent()
    StringBuffer sb = new StringBuffer();
    for (int i = 0; i < idx; i++)
    sb.append(" ");
    return sb.toString();
    }// END PRGM
    Now , am not a very good Java DEv. and i need to find a soln. to this prob within 1 week.
    The next step is to write the data to the DB.
    Am sending an example of my file:
    <Start>
    <Machine>
    <Hostname> IPCServer </Hostname>
    <HostID> 80c04499 </HostID>
    <MachineType> sun4u [ID 466748 kern.info] Sun Ultra 5/10 UPA/PCI (UltraSPARC-IIi 360MHz) </MachineType>
    <CPU> UltraSPARC-IIi at 360 MHz </CPU>
    <Memory> RAM : 512 MB </Memory>
    <HostAdapter>
    <HA> kern.info] </HA>
    </HostAdapter>
    <Harddisks>
    <HD>
    <HD1> c0t0d0 ctrl kern.info] target 0 lun 0 </HD1>
    <HD2> ST38420A 8.2 GB </HD2>
    </HD>
    </Harddisks>
    <GraphicCard> m64B : PCI PGX 8-bit +Accel. </GraphicCard>
    <NetworkType> hme0 : Fast-Ethernet </NetworkType>
    <EthernetAddress> 09:00:30:C1:34:90 </EthernetAddress>
    <IPAddress> 149.51.23.140 </IPAddress>
    </Machine>
    </Start>
    Note that i can have more than 1 machines (meaning that i have to loop thru the file to be able to write to the DB)
    Cal u tellme what to do!
    Even better- do u have a piece of code that will help me understand and implement the database writing portion?
    I badly need help here.
    THANX

  • How do I make 1 video file play alone or as part of a sequence of videos

    how do I make 1 video file play alone or as part of a sequence of videos and only have it on the disc once.
    My problem is that I am short of space on my disc due to the amount of content, and all of the files appear separately on the menu to play invividualy, but i would like to have a play all function aswell without putting the files on the disc twicew. Am I being an idiot? Is this easy to solve?

    Take a look at "stories" in the manual.

  • How can I make the pdf file size smaller?

    How can I make the pdf file size smaller?

    Hi vickyb,
    Reducing the file size of PDF requires Acrobat (one way is by choosing File > Save As > Reduced Size PDF). If you don't have Acrobat, you can try it free for 30 days. See www.adobe.com/products/acrobat.html for more information.
    Best,
    Sara

Maybe you are looking for

  • ALV Problem

    Moderator message: please use a more meaningful subject in future Hi Experts, I have one query in ALV report. In ALV output I am not able to see the option for SUM & subtotal icons are not displayed. I wanted to display both icons in my ALV output. A

  • Digital Signatures in Acrobat 5?

    I have acquired a certificate (p12 file from TrustCenter thruough my employer). I am able to sign/certify documents in Acrobat 8 Pro. Most of our users, however, are still using Acrobat 5 Pro and would like the ability to sign PDF's. Is there a way t

  • Failed to load Source Model

    Trying to load Source Model from MS SQL Server 7.0, getting an error "Failed to load Source Model. [Microsoft][ODBC SQL Server Driver][SQL Server]Line 1: Incorrect syntax near '.7'.". The last entry in the log was "Capturing Loading SS7_SYSFOREIGNKEY

  • System Refresh problem - request/task does not exist

    I have a problem after system refresh, and when I am trying to import users and roles, I get the message - request/task XXXXXXX does not exist. Data/cofile are present. Can someone help me please ? Thanks in advance, Jordan

  • Problem with Android app

    One article in my folio should show a pdf-file, there is the link to this file in Web content frame. In iOS everything works fine, but Android devices don't show the file! Can native Android apps show pdf-files in Web Content???? And is it possible t