How to access and set the object attributes in a task flow?

I have created a web service data control which has an operation having input as payload object. This payload object has two attributes min and max. I am calling a task flow in a dynamic region in which I want to display result of this operation for which i have to set the values for min and max. I want to set these values when I click the taskflow link. How to achieve this? I am new to adf.

Hi Arun,
Thanks for your reply.
I have tried passing parameter to a task flow, but i cannot set the action to a task flow call because it already has action for a method in a dynamic region which renders the task flow at runtime. How do i set action to task flow call link? Also once i get the parameters into the page flow scope variables, i want to pass those to one of my data control operation which displays the result in that taskflow.(i dont want to create parameter form for this operation).

Similar Messages

I need to know how to access and use the Blue Tooth device that comes with the Thinkpad W520

Forgive me for being a techo illiterate. But I know that this thing supports Blue Tooth. And one "problem" with it is although it has a DVD and sound card, music and movies have very lousy audibility. Is there something I can do about that? I can barely hear anything on a movie unless I plug in head phones to the computer. But that leaves me stuck in my seat. I'd like to get cordless headsets. And I'm ready to purchase the Plantronics BackBeat 903+ Wireless Stereo Headphones - Mic, Rich Audio, Bass-boost, Voice Alerts, OpenMic, 3-way Earpiece. And have heard that it's compatable with a pc that has Bluetooth capabilities. but could someone get back to me with exactly how I access and use the Blue Tooth device?

I was searching for how to setup the 903+ and my W520 and came to this thread.
1. The OP was asking about audio and there are updated audio drivers / tweaks to get it louder / install different drivers.
but if you are going to go BT headset....
2. What I did for the 903+
Uninstalled the currently installed ThinkPad Bluetooth program. ( I forget the exact name, came stock and was out of date).
Required reboot.
Activated the Bluetooth with FN + F5 menu.
Downloaded the updated Bluetooth driver from lenovo (search lenovo driver matrix).
Ran the updated Bluetooth driver install.
Rebooted for good measure.
Double-clicked the Bluetooth Tray icon.
Clicked Add A Device.
Turned off my 903+ and continued to hold down the power to enable pairing mode.
Showed up in devices and added it.
Worked for audio. There are probably additional options for enabling the mic.
Hope that helps whoever might find this thread.

How to get and set custom tag attributes

How do i get and set custom tag attributes from a jsp page?

Not sure if this is what your looking for, but....
example...
< taglibprefix:testtag attribute1="x" attribute2="y">
...of course, the attributes have to be defined in your taglib (.tld) file

How to get and set the column order in SharePoint list forms

Hi,
I want to read the column order of the SharePoint list forms in SharePoint 2003 sites using any of the available web services and need to set the same order
in the newly created list in SharePoint 2010.
I am able to read the fields from SharePoint 2003 and creating the list with same fields in SharePoint 2010, but the column order is not maintaining in
list forms.
Also, I need to created the views from 2003 site to 2010 site.
Please help me...
Thanks in advance...

Hi,
Please try to use the following code to programatically change the order.
SPList list = web.Lists["Example List"];
if (list.ContentTypes.Count > 0)
SPContentType ct = list.ContentTypes[0];
string[] names = {"Example_x0020_One", "Example_x0020_Two", "Example_x0020_Three"};
ct.FieldLinks.Reorder(names);
ct.Update();
Here is a similar thread for your reference:
https://social.technet.microsoft.com/Forums/en-US/ce66fd65-2882-4bda-8142-89e116d8b90f/how-to-set-the-order-of-the-fields-in-list-forms?forum=sharepointdevelopmentprevious
Best Regards
Dennis Guo
TechNet Community Support

How to access and restore the files in recovery D on my HP Pavilion Windows 7??????

Im not very good with the technological side of computers, but it asked me to restore to factory settings after turning my computer on in the morning. I asked it to back up my computer so I can restore it which I believe it did to the Recovery D drive. I can open this file but it comes up with
Recovery Partition Warning
This area of your hard drive (or partition) contains files used to perform and system recover.
Do no delete or alter any of these files
Any change to this partition could prevent a system recovery in the future.
It also says there is 1.94GB free of 15.7GB which must mean there are files in there but I dont know how to access them.
Please help and please try to speak in term in which I may understand. As I said I dont really understand computer language lol.
Thanks in advance for your help.

Thank you. I think I completely stuffed it up. I didnt put anything into my computer to back it up like an external hard drive because I dont think I actually know what the computer was doing at the time so looks like I may have lost all my previously applications, settings and data. Oh well I'll have to live with that, Thanks for your help much appreciated

How to commit data at the end of a bounded task flow

Hi all,
I am using JDev 11.1.1.0.2.
I have this situation
1) A page with a button that goes to a task-flow to insert data (property data-control-scope set to shared and property transaction set to requires-transaction as suggested in http://www.oracle.com/technology/products/jdev/tips/fnimphius/cancelForm/cancelForm_wsp.html?_template=/ocom/print )
2) At the end of this task-flow a I have a TaskFlowReturn (property End Transaction set to commit)
When I click the button associated to this TaskFlowReturn, I return to the first page (described in 1) ), but the data I have just inserted are only submitted, but not committed.
What's the problem?
Any suggestions?
Thanks
Andrea

Hi,
if you set the return activity to commit the transaction then this is done. I don't see why rollback should work but commit doesn't
Frank

How does Apex access and manage db objects in other schemas?

I'm looking for a description of how Apex accesses and manages database objects in other schemas.
I'm sure I've seen such a description somewhere earlier but am unable to find it again...

Hi Rene,
When you are connected to sqlworkshop, it is basically connected to the sceham owner of the workspace. If you execute the query
select sys_context( 'userenv', 'current_schema' ), user, username from user_users;you would see the schema and user(currently connected) and schema owner through which you have logged in. The user will have all the privileges granted to schema owner. So basically you get connected through APEX_PUBLIC_USER and it has all the privileges of the schema owner.
In order to run scripts in another schema you would need grants on other schema same like you are connected to user A through sqlplus and wants to create objects in schema B. For example lets say you want to create a table in schema B and you have create table privileges in scehma B , you can execute command create table B.emp as select * from A.emp;
I hope this answers your question.
Regards,
Manish

Access and set title of JInternalFrame from contentPanel

I know the answer is probably very easy but how do I dynamiically access and set the title of the JInternalFrame from a JPanel in the contentPane? The problem is the JPanel does not have a direct reference stored to the JInternalFrame

Hi,
Please try '''firefox -p -no-remote''' in the '''Start''' > '''Run''' box (or press windows key + '''R''' if the Run box is not present), delete all the profiles with the files in it and create a new one. Please also see [http://kb.mozillazine.org/Profile_folder_-_Firefox Firefox Profile Folder & Files] and [https://support.mozilla.com/en-US/kb/Backing%20up%20your%20information?s=backup&r=1&as=s Backup.]
Useful links:
[https://support.mozilla.com/en-US/kb/Options%20window All about Tools > Options]
[http://kb.mozillazine.org/About:config Going beyond Tools > Options - about:config]
[http://kb.mozillazine.org/About:config_entries about:config Entries]
[https://addons.mozilla.org/en-US/firefox/addon/whats-that-preference/ What's That Preference? add-on] - Quickly decode about:config entries - After installation, go inside about:config, right-click any preference, enable (tick) MozillaZine Results to Panel and again right-click a pref and choose MozillaZine Reference to begin with.
[https://support.mozilla.com/en-US/kb/Keyboard%20shortcuts Keyboard Shortcuts]
[https://support.mozilla.com/en-US/kb/Viewing%20video%20in%20Firefox%20without%20a%20plugin Viewing video in Firefox without a plugin]
[http://kb.mozillazine.org/Profile_folder_-_Firefox Firefox Profile Folder & Files]
[https://support.mozilla.com/en-US/kb/Safe%20Mode Safe Mode]
[https://support.mozilla.com/en-US/kb/Basic%20Troubleshooting Basic Troubleshooting]
[http://kb.mozillazine.org/Problematic_extensions Problematic Extensions]
[https://support.mozilla.com/en-US/kb/Troubleshooting%20extensions%20and%20themes Troubleshooting Extensions and Themes]
[http://kb.mozillazine.org/Testing_plugins Testing Plugins]
[https://support.mozilla.com/en-US/kb/Troubleshooting%20plugins Troubleshooting Plugins]

How to export and import the lsmw

Hi Friends,
How to export and import the objects in lsmw
from dev to qas(quality) systems........
its urgent.........
regards,
venu.

best way is to create a transport and move it to other enviroments
There are two ways of Transporting for this. Can choose any one.
Goto the LSMW Transaction
1)Extras>Export Projects>(Give the Project name)
In next screen(Choose what subproject, routines, etc.. you wan to copy then, Export Rules-->Export((Will prompt for file name)
A text file will be downloaded.
In the Target System
Goto LSMW Extras-->Import Projects and give the text file which was downloaded.
2)Extras-->Generate Change Request
Assign a change request which is basically a transport request and you can then get this transported from one system to another through the basis route.

When I download itunes, it says that Ipod Service failed to start. I checked the services under task manager and when I try to start it, it says access denied. How to I get access and for the ipod service to start and run?

Please help. My ipod classic could not be recognised by itunes when I connect my ipod to PC. Previously it has been recognised before I updated. This was a while ago now and so I removed all apple files and re installed the latest itunes but am having the same problem.
When I download itunes, it says that Ipod Service failed to start. I checked the services under task manager and when I try to start it, it says access denied. How to I get access and for the ipod service to start and run?

Some anti-virus programs (e.g., McAfee) have this rule that can be invoked under the "maximum protection" settings: PREVENT PROGRAMS REGISTERING AS A SERVICE. If that rule is set to BLOCK, then any attempt to install or upgrade iTunes will fail with an "iPod service failed to start" message.
If you are getting this problem with iTunes, check to see if your anti-virus has this setting and unset it, at least for as long as the iTunes install requires. Exactly how to find the rule and turn it on and off will vary, depending upon your anti-malware software. However, if your anti-virus or anti-malware software produces a log of its activities, examining the log may help you find the problem.
For example, here's the log entry for McAfee:
9/23/2009 3:18:45 PM Blocked by Access Protection rule NT AUTHORITY\SYSTEM C:\WINDOWS\system32\services.exe \REGISTRY\MACHINE\SYSTEM\ControlSet001\Services\iPod Service Common Maximum Protection:Prevent programs registering as a service Action blocked : Create
Note that the log says "Common Maximum Protection: Prevent programs registering as a service". The "Common Maximum Protection" is the location of the rule, "Prevent programs registering as a service" is the rule. I used that information to track down the location in the McAfee VirusScan Console where I could turn the rule off.
After I made the change, iTunes installed without complaint.

How to set the DFF Attribute Programmatically?

hi
how to set the DFF Attribute Programmatically in Process Request of CO
thanx

Hi
Do u want to set the value in DFF Programmatically ?
u can capture the VO used for DFF and set the the value in controller.
Thanks

Trying to set the entity attributes in before commit and get the following

i get the following error when i try to set the entity attributes before commit.
JBO-28202: Entities invalidated in beforeCommit(). Need to re-validate and post.
can somebody let me know, how to re-validate and post.

I Suggest you set its Attribute on EOImpl, override doDML, and before call super.doDML set your Attribute. There is a special reason to set Attribute on beforeCommit?
Best Regards

I've had a hard drive crash and put in a new one. However iTunes has or list all of them from my old drive. How do we re-set the directory

I've had a hard drive crash and put in a new one. However iTunes has or list all of them from my old drive. How do we re-set the directory?

You can re-download the software from Download CS5.5 products
Install and enter your serial number when prompted.
Find your serial number quickly

How can I access and use the alphabetical keyboard of the phone ?

How can I access and use the alphabetical keyboard of the phone ? I cannot find the answer in the manual of use. Thanks for your help !

Recently I was abroad and tried to contact my voicemail to check my messages. I was asked to enter a password and did not know how to use the letters below the figures on the keyboard. I had to give up and wait until I was back in my country (no password is then needed).

I inadvertently pressed CTRL+ another key (possibly V or B or N) and the text size of my bookmarked page was significantly reduced in size. I can't read it. How do I re-set the text size?

I mistakenly pressed CTRL + another key (possibly V or B or N or whatever), when I was reading my e-mail. The text size shrank to a size that is useless to me, but I cannot seem to get the text size re-set to normal. Indeed all of the formatting on the page has been reduced (symbols, instructions, frames etc). Existing Firefox and returning to the bookmarked page makes no difference. How do I re-set the system?

Hi,
Please try '''Ctrl''' + '''0''' (zero). Alternatively '''View''' ('''Alt''' + '''V''') > '''Zoom''' > '''Reset'''.
[https://support.mozilla.org/en-US/kb/how-do-i-use-zoom?redirectlocale=en-US&redirectslug=Page+Zoom Page Zoom]
[https://support.mozilla.com/en-US/kb/Keyboard%20shortcuts Keyboard Shortcuts]

How to access and set the object attributes in a task flow?

Similar Messages

Maybe you are looking for