How to access the System's Printer

Hi,
How to access the printer using java. Can any one give me a sample.
Thanks in advance,
Maheshwaran Devaraj

http://java.sun.com/docs/books/tutorial/2d/printing/index.html

Similar Messages

Bought a mac for my sons bday present of eBay :( it starts up in osx utilities screen, iv never seen the actual desktop(launch pad) I dnt know how to access the systemI know the basics for start up but says to delete files so I can dwnload the software?

AS above states the computer seems to run normally as far as turning it on, tabs & pages are fine. But I can't access the system to delete some files.. Which is what the 'error' keeps saying everytime I tr and download a helpful link/app or software.. The instal disc that seems to be stored on the comp says its mountain lion 10.8 install disk 'read only' & this is the only disc it gives me to select to startup.. I have the full software on USB as its very large.. So .. PLEASE TELL ME finally,
HOW to ... Access comp files to delete required memory for software install?? If this is the best option..
HOW to ... Erase everything on computer & install 10.8 via USB?
And when or what enables me to see and use this computer correctly..ie, launch pad? Etc..
PLease reply back in 'normal terms' as I'm already exceeding my boundaries of imac knowledge

First: no, you cannot use someone else's install DVD unless it is a retail version; all others are machine specific. It will not work and would be illegal.
Is this what you bought?
http://www.everymac.com/systems/apple/imac/specs/imac_cd_2.0_20.html
IF that is correct, then you are not on 10.8 because the highest OS it can go to would be 10.6
So, you'd either need the original install disks (preferred) or buy a retail Snow Leopard (10.6) - that is as high as you can go with that machine. And, your maximum RAM is 2 GB, so you couldn't go higher with the OS because of that either because it would not run well on 2 GB.
If you do get 10.6, then I'd suggest increasing the RAM to the max. of 2 GB.
If this is not the machine you got (maybe the seller just used any old box), then I'd suggest taking it to an Apple store/Genius Bar to have them sort out how to get out of this mess.

How to Access the Systems ipaddress in a java program

Hi
   In a network The ip addresses of every system is changing.So that i want to know the ipaddresses of the system dynamically.
   I want a client program to do that.
And also i want to kno how to create a .exe file for java
class file

Hi
In order to find the IP address of a system dynamically through a java programme Here is code...
    import java.net.*;
    public class check{
     public static void main(String args[])
              try
{ InetAddress addr = InetAddress.getLocalHost();
    String ipaddress_as_text =addr.getHostAddress();
    System.out.println(ipaddress_as_text);
        catch(Exception ex){}
For the 2 question ie to convert a .class file to a
.exe file there are some tools available...
I think the following link will be useful to you.
       http://duckware.com/jexepack/index.html
    Thank you....

How do I set up the system to print 4x6 labels via paypal and ebay using a DYMO 4XL Thermal Label Printer (through airport)?

We bought a DYMO Label Writer 4XL. We want to print thermal labels from our Mac and PC, wireless. The good thing is that I already have the printer set in the network and added on each of our computers (Mac and Windows 8). For printing regular labels you can use the Dymo software; for printing postage labels from ebay or paypal has been impossible.
From ebay I even tried one label at the time but still did not work. I sent the the print command from the mac-print-window, changing each of the settings (such as paper size) but did not work. Each time (no matter if you want to print one label only) it advances more than one lable.
http://community.ebay.com/t5/Miscellaneous/Using-a-thermal-printer-for-eBay-labe ls-using-a-Mac/qaq-p/3135261 (post by stormshock)
Through Paypal is a different story. It should be easy cause it seems the Zebra Driver in Paypal works with this DYMO. The issue is how to get the system to send the print command to the DYMO printer through the Zebra LP2488? please help! I know some people have succeded making all these work. What am I missing?
http://www.amazon.com/review/R3E73A6ZX39ZZQ/ref=cm_cr_pr_cmt?ie=UTF8&ASIN=B002M1 LGJ4&linkCode=&nodeID=&tag=#wasThisHelpful

To whomever is reading this post I just wanted to let you know I returned the Dymo 4XL. Their customer service is horrible. Technical support does not exist at all. The issue was extremely frustrating and time consuming. I do not recommend this thermal printer at all. Good luck finding one... if you do, please share.

How do you get permission for FlexLm/HASP to access the system clock?

I've got animation software that accesses the system clock to verify a security dongle. It works fine under 10.4.3, but I recently got a dual processor G5 with 10.4.5 on it. According to the s/w tech people, the dongle mgmt s/w doesn't have permission to access the system clock because of new security fixes. Anybody have any idea how I can open permissions to the system clock so I can get back to work?
Thanks for any help you can offer...
Brian

Moving this discussion to the Using Flash Builder forum.
I believe the software though is working as designed. From previous discussions I have seen the Design view was removed in Flash Builder 4.7. The users in this forum may be able to provide additional information around this.

How to access the pre-delivered XI Integration Content for APO ,SCM or CRM

Guys,
Do anyone know how to access the pre-delivered XI Integration Content for APO ,SCM or CRM and load onto the XI server.
Any inputs in this direction is appreciated.
Thanks, -Vara.

Hi VaraPrasad,
you can try:
1. https://websmp204.sap-ag.de/swdc
2. Search for all Categories
3. type: XI content
then unpack and the easiest way is to import with the file system:
http://help.sap.com/saphelp_nw04/helpdata/en/a8/5e56006c17e748a68bb3843ed5aab8/content.htm
and you have the content on your XI
Regards,
michal

How to access the *.java file corresponding to a TypeElement T?

Here is a problem:
How to access the *.java file corresponding to a TypeElement T from a AnnotationProcessor environment?
Let us say the hook method
public boolean process(Set<? extends TypeElement> annos, RoundEnvironment roundEnv)
is invoked with a TypeElement T such that T.getQualifiedname() = "a.b.c.X"
And the problem is how to locate the file that has the *.java source code for a.b.c.X?
That is the file that has the source code for a.b.c.X say "some/path/a/b/c/X.java"?
For simplicity, let us assume that TypeElement T corresponds to a top-level Java class.

Pinaki wrote:
That is not something you as the annotation processor author should be asking about. That is something you the person configuring the javac environment should set up via the -d option or its equivalent.
I strongly recommend using a separate output directory hierarchy.That is the way the current implementation is. The annotation processor takes a -Aout= <some directory path> to write generated output relative to a user-specified location (which defaults to the class output location).That is contrary to the design of the annotation processing facility. The intended use is for that information to be configured via options like "javac -d".
Additionally, IMO it is a serious configuration error to put generated files and input files, presumably tracked under version control, in the same directory. Interesting you said that. We are just running some "field trial" with these things and some users want them to be in the same directory of the original *.java files (especially when their source files are spread across many roots) .
Who knows what the user wants?The user does and the user is free to (mis)configure their environment however they like ;-) However, that is the user's option and the user has control of this via the javac command line. The annotation processor is not the proper place to configure this setting; see slide 7 of http://blogs.sun.com/darcy/resource/J1_2006-BOF-0606.pdf for some thoughts on different roles in annotation processing.
presumably tracked under version control, in the same directory.version control is another 'usability issues' that we are trying to get our heads around with this stuff. "To check-in or not?" - that seems to be the question. When presented these facilities without any cue, "the users" were divided -- some wanted them to be checked-in, some did not. The context where these generated files being used -- there exists some rationale to check them in a version control system.The right answer depends on the circumstances, but IMO generally generated files should not be checked in under version control, especially if they are derived from other source files. Checking in generated files of this nature just creates the opportunity for them to get out of date with the originating files.

How to access the ORACLE APPS table structures from SAP

Hi Experts,
How to access the ORACLE APPS table structures from SAP? Is it possible from SAP?
Thanks in advance
Thomas

Hi Silviya,
you can access this database using a technique called DB Multiconnect - sometimes written as multi-connect.
Search the SAP documentation and notes for this term and you will find how to do it.
Essentially you configure the remote database connection via transaction DBCON.
If your SAP system is not running on Oracle you will need to install the db-specific kernel files for Oracle along with the Oracel db client software - SQL*Net.
Then you can access the Oracle database from ABAP using native-SQL. It works a treat!
Cheers
Graham Robbo

How to access the SAP Server Console? Through VPN

How to access the SAP Server Console? Through VPN
Sudhakar

Hi,
You need to contact your system admin as they will enable the port in ur system so that u can access client servers.It should also be allowed from client side also i mean access.
You will connect thru weblink with user name and pw and SAP with logon details.
Thanks
Suresh

How to access the sql database in applet?

How to access the sql database in applet?
Please help me.

import java.applet.*;
import java.awl.*;
import java.sql.*;
//other packages
public class jdb extends Applet
Connection con;
Statement stmt;
String name="drvijay";
String phoneno="9842088860";
public void init(){}
pubilc void stop(){}
public void destroy(){}
public void start()
call();
public void call()
try{
          Class.forName("sun.jdbc.odbc.JdbcOdbcDriver");
          conn=DriverManager.getConnection("Jdbc:Odbc:emp","sa","");
          stmt=conn.createStatement();
          stmt.executeUpdate("insert into empdetails(name,phoneno) values ('"+name + "',''"+ phoneno +"' )" );
          }catch(SQLException e)
               System.out.println("error"+e);
               System.exit(0);
//<applet code="jdb" height="200" width="200"> </applet>
u this jdbc statement in any of the method..
*/

How to get the system time in a Swing application ?

I know how to do it in JavaScript, but not java. Please help me, and also how to get the system time in an Applet. Thanks !!!

Check this link, I hope it helps
http://202.71.136.142:8080/globalleafs/Swing/View.jsp?slno=22&tbl=0

In VB Programming code -- How to access the formula for suppressing a field

In VB Programming code -- How to access the formula for suppressing a field
I am using Crystal Reports 2008 v1
Using VB code, I am attempting to modify a Crystal Report before exporting it into a PDF format and then displaying it on the Web.
My problem is that I am unable to access the formula used to dynamically suppress a field.
The following code is working:
mySections = rd.ReportDefinition.Sections
For Each mySection As CrystalDecisions.CrystalReports.Engine.Section In mySections
   ' myFieldToChange is a String set to the text of the field I need to adjust the Suppression
   iloop = 0
   For Each RecObj As CrystalDecisions.CrystalReports.Engine.ReportObject In mySection.ReportObjects
           If mySection.ReportObjects.Item(iloop).Name.ToLower = myFieldToChange Then
               myTextObject = CType(mySection.ReportObjects.Item(iloop), CrystalDecisions.CrystalReports.Engine.TextObject)
               myTextObject.Text = "new field text goes here"
               mySection.SectionFormat.EnableSuppress = True
               ' Here is where I want to change the formula for the Suppression
            End if
            iloop = iloop + 1
    Next
Next
I can not find any reference to the actual suppression formula in the SDK help file.
Note, the EnableSuppress can be set to True for False, but if there is a formula for dynamic suppression, the True or False value is overwritten. The results of the formula determine the suppression.
Is there a way to reference this formula. I know that I can put on in using the Crystal Report Designer software, I need to modify this formula using VB code and the SDK.

Hello, Mark;
If you are using the ReportDocument object you do not have access to the Conditional Suppression formula. You can get around it by using a formula field in the report for the supression and then using the FormulaField code to change it at runtime.
If you want to change the supression condition directly at runtime you need to use RAS and the ReportClientDocument.
Elaine

How to access the photos on icloud

hi
how to access the photos which i saved in i cloud, from my iPhone 5,
Note: i do not use any PC. and i only have purchased 20 GB of space on an annual sub. so as to save my photos, and create space in my phone and now i am unable to access it,
please advise
thanks
xxv

There isn't really a way to "save" photos to iCloud currently with non-beta software.
iCloud is involved with photos in 2 ways -- backup and Photo Stream.
Backup of an iOS device includes Camera Roll photos but they cannot be viewed at iCloud.com -- the backup can only be used when doing a restore of an iOS device.
Photo Stream photos also cannot be viewed at iCloud.com; Photo Stream is designed as a method of transferring photos from one device to another and is not designed to store the photos. More info http://support.apple.com/kb/HT4486
There is a new feature -- "iCloud Photo Library" -- coming sometime after the iOS 8 release next week: http://www.macrumors.com/2014/09/12/apple-demotes-icloud-photo-library-beta/

I used a partitioned HDD for time machine, using a partition already containing other data files. I am now no longer able to view that partition in Finder. Disk Utility shows it in grey and "not mounted". Any suggestions of how to access the files?

I used a partitioned HDD for time machine, using a partition already containing other data files. I am now no longer able to view that partition in Finder. Disk Utility shows it in grey and "not mounted". Any suggestions of how to access the files? Does using time machine mean that that partition is no longer able to be used as it used to be?
HDD is a Toshiba 1TB, partitioned into two 500GB partitions.
OS X version 10.9.2

Yes, sharing a TM disk is a bad idea, and disks are cheap enough so that you don't need to.
Now
Have you tried to repair the disk yet

How to access the global data in user exit.

Hi All,
How to access the global data in user exit.
the question is that when we were writing a code in the FM. i need to read data from the standard program like newly created documen and this document number need to be accessed in my program.
this document number is not imported to the FM i needed to access for frther proceed.
Thanks in advance.

Hi,
See the below PDF file by Jeff Goldstein. There you can find all the details about accessing data outside of the exit.
[SAP User Exits and the People Who Love Them|https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/208811b0-00b2-2910-c5ac-dd2c7c50c8e8]
This will help you to solve your problem.
Regards
Karthik D
Edited by: Karthik D on Dec 2, 2008 4:18 PM

How to access the System's Printer

Similar Messages

Maybe you are looking for