How to activate company code field on selection screen of report pc00_m40_f24q ?

Hello,
Client is upgrading form ECC 6.0 ehp3 to ECC6.0 ehp7 . The report is generated according to the company code ,but after upgrade the company code field got disabled. Can any tell what might be the reason for this?
Regards,
Yashika

Go to SE38 - Pass program name HINCF24Q- select - attributes - click on display - click on HR report category - click on F7 - click on CTRL+F1 - allowable selection criteria - click on F5 - add company code from the drop downs and then check.
Once resolved close the thread as well.
Regards
Venkatesh

Similar Messages

How to add order reason code field to selection screen of VL10

Hi,
How to add Order reason code(vbak-augru) to the selection screen of VL10.
1. How to find enhancement for it?
2.I want to display Order reason code field on output list also?
3.Pls give steps i am new to enhancements
thanking u advance...
surya

Hi,
there is no user exit available for this report program, one alternative is copy the program associated with this standard program i.e. RVV50R10C to a Z program and modify it as per your requirement or if you want to modify the standard program you need access key.
Regards,
Raghavendra

How to make the obligate field in selection screen

Hi ,
In my report two radio buttons and two bloc selection screens are there.When we select the first radio button first screen will be editable second screen will be non-editable vice-versa.
but the problem is in each selection screen one mandatory field is required suppose if i give the one field obligatory in first block screen it is not allowing the second readout please help me regarding this how i will make the mandatory field in both screens.
Thanks,
Harinath

Hi...
Dont Declare your field as OBLIGATORY.
Instead perform the validation in AT SELECTION-SCREEN event. But validation should be only when Particular Radiobutton is selected.
And Generate only Error Message (Type E).
Try this code:
AT SELECTION-SCREEN on <yOUR mandatory field>.
   IF PA_UPD = 'X'.
         IF <YOUR MANDATORY FIELD> IS INITIAL.
              Message 'Entry is must in this field' type 'E'.
         ENDIF.
   ENDIF.
AT SELECTION-SCREEN OUTPUT.
IF pa_udp = 'X'.
LOOP AT SCREEN.
IF screen-group1 = 'ABC'. "#CCE
screen-active = 1.
ELSEIF screen-group1 = 'DEF'.
screen-input = 0.
ENDIF.
MODIFY SCREEN.
ENDLOOP.
ELSEIF pa_rep = 'X'.
LOOP AT SCREEN.
IF screen-group1 = 'ABC'. "#CCE
screen-input = 0.
ELSEIF screen-group1 = 'DEF'.
screen-active = 1.
ENDIF.
MODIFY SCREEN.
ENDLOOP.
ENDIF.
<b>Reward if Helpful</b>

How to include text lable in Variable selection screen (Web Reporting)

Hi Experts,
I have created one query and in Web Report-->variable selection screen I have one Date field for that field I have to display a label stating that user to input date in the format YYYY.MM(like a text label).Actually I have created 10 to 12 report . I need u r suggestion such that a single change will reflect my requirement in all the reports and I have created all the reports for same multiprovider.
Thanks in Advance
Yours,
Bala

Bala,
Prompts can originate from one of two places: either via Designer and using the @prompt functionality or while creating the report building a prompt in the Query Filters panel. If the prompt was built using the @prompt method, and all 10-12 reports are using that particular @prompt, then one change via Designer will cause all reports to reflect the new verbiage. If you built the 10-12 reports using the prompt in the second scenario, then each individual report needs to be opened, modified and then saved. If you must use the latter method, then you can open the first report, modify the prompt verbiage, then highlight the new verbiage with your mouse and hit Control-C (which copies that text to the Clipboard of your Windows system). Then go to the second report, locate the verbiage that needs to be changed, delete it, then Control-V (which pastes), and voila, some keyboarding strokes are saved....
Thanks,
John

How to activate NCM code Field on STO PO(doc type:UB) for Brazil

Dear Gurus,
I,m working on STO PO-Doc type UB for Brazil.On PO item level on the Tab Page Brazil one field should be there with name NCM CODE.That field is disppeared for this doc type UB.For all the other doc types that field is visible.
I have checked the settings related to UB and the field NCM codeScreen field:MEPO1326-J_1BNBM
is mandatory.
Can u kindly inform me how to make the field visible?
Regards
Kumar

.

Need to add date field on select screen of report RM06INP0.

Hi All,
I have to create a new report ZRM06INP0 as a copy from RM06INP0 and add a field in the selection.
When the selection "Price Determination w/o PO" is not picked then we need a maintainable field from the info record. The default for the date is 9999.12.31 and should manually maintained. This date shoulde be written in the info record.
How to achieve this?
Please see OSS Note 392 988 Solution to 2 for more info.

Hi Akash
What kind of date is you wanted? You can try to find it in dynamic selections.
regards,
Archer

How to add Material type(MTART) field on Selection screen of MB5B transaction code.

Hi All,
    Please let me know how to add material type field on selection screen of MB5B transaction
For that i made copy ZMB5B_COPY of original report RM07MLBD.
Thanks in adv .
Samadhan

Hi,
Once you copied the standard report to Z report, you can MTART in selection screen like below.
and in order to inlcude the same in programming logic, we have three option.
1) Check all related select queries, and include MTART in SELECT query using inner join with MARA.
2) In START-OF-SELECTION event fill MATNR as shown below.
3) If user entered any value in MTART, then before displaying the report just check material type of each material in the final internal table(which is used to display report) delete enteries from internal table accordingly.
START-OF-SELECTION.
IF MTART[] IS NOT INITIAL AND MATNR[] IS INITIAL.
    SELECT MATNR FROM MARA INTO MATNR-LOW WHERE MTART IN MTART.
      MATNR-OPTION = 'EQ'.
      MATNR-SIGN = 'I'.
      APPEND MATNR.
      CLEAR MATNR.
    ENDSELECT.
ENDIF.
The above option has one limitation: The selection screen variables has some restriction, please read the below thread.
Facing problem in select statement dump DBIF_RSQL_INVALID_RSQL CX_SY_OPEN_S
Getting Dump in the select query has more than 2000 entries
Hope this will work for you .
regards,
Rajesh Sadula.

Validating field on selection screen

wht is the meaning of validation
how to validate a particular field on selection screen
suppose parameters:p_vkorg like vbak-vkorg.
how to validate p_vkorg.
pz give me coding

Hello pavan,
Validation means "checking whether the input which u are gining to the selection secreen is valid or not". means...
Lets take your example only...
parameters:p_vkorg like vbak-vkorg.
in selection screen you will give inout in that parameter....
users can give any input... lets suppose I'll give input as ABC... which is not in the table VBAK. No need to excute the code once we came to know that the input is not there in the table. So we will do validation like...
at selection-screen on p_vkorg.
select * from vbak where vkorg = p+vkorg. " This is the case with Parameter.
at selection-screen on p_vkorg.
Select * from vbak where vkorg = p+vkorg. " This is the case with Selct-option.
if the input that u r giving is present in the table... the above stmt will execute successfully, otherwise not.
You can make use of System variable SY-SUBRC and you can go ahead with ur coding...
Reward If Helpful
Regards
Sasidhar Reddy Matli.
Message was edited by:
Sasidhar Reddy Matli

Adding the field in selection screen

Hi Guru's,
how can i add the field in selection screen of t code qa33.
can any one help me pls.
Thanks & Best Regards,
Rakhi.

You can enhance the standard program RQEEAL10 using implicit enhancement points.
Click the spiral (Enhance) button (Shift + F4)
Go to Edit -> Enhancement operations -> Show Implicit Enhancement Poitns
Create an Enhancement Implementation and include your code there.
See the following link -> Source Code Enhancements - Part 5 of the Series on the New Enhancement Framework
Hope it helps
Neeraj

Month/year input field in selection screen

Hi,
Can anyone tell how to declare an input field in selection screen in the format month/year with out day.
Thanks.
Prasad.

hi ,
I have the same doubt ,
but its taking invalid input also as in if i enter 13/2006
Can it be avoided,
also can the calender be displayed at F4 on such field.
Thanks in advance
Regards
Bijal

Protecting certain field on selection screen

Hi,
How do I protect certain field on selection screen.
Thanks,
Manjula.

By saying Protecting, do you mean something as below:
parameters: p_matnr type matnr obligatory,
            p_maktx type maktx.
at selection-screen output.
   loop at screen.
        if screen-name cp 'P_MAKTX'.
           screen-input = 0.
           modify screen.
        endif.
   endloop.
   if not p_matnr is initial.
      select single maktx into p_maktx
             from makt
             where matnr = p_matnr
             and   spras = sy-langu.
   endif.
Kind Regards
Eswar

How to activate Compny code validation ( cross company code)

*Hi ,*
*We migrated classic GL to New GL before one month Now*
*I am rollout new company code, after completed all configuration I found uncopmplit configuration of company code validation is not active in controlling area config ( Transaction Code- OKKP) , which is related to cross company code ( Indicator for company code validation )*
*can anybody provide solution to activate company code validation*
Thank ,
Jeetendra

Hi ,
I want to activate company code validation for cross company code still it is inactive
without activation I can not use cross company code for costing
Edited by: jitu konde on Jun 15, 2011 9:38 AM

Can you explain me clearly how to make company code visible in cost center

can you explain me clearly how to make company code visible in cost center master data using tcode kmlv

Hi,
There is no way to activate the company code field. If your Controlling Area and Company Code have one to one Assignment, then Company code is defaulted from the Controlling Area. However, if multiple Company Codes are assigned to one Controlling Area, then Company Code becomes a mandatory field in the Cost Center master data
Also, in case you have multiple company codes assigned to one controlling area, please check the setting of the Controlling Area in Configuration and see if have selected "Cross Company Code Cost Accounting" . Also, check if you have assigned all the company codes to the controlling area
Regards
Mahendra

Usage of Company code field in the Change Request for Company

Hi,
Would like to know the usage of - Company code field in the UI for Change request for Company.
1. If a new Company is created, can i assign the company code directly in the UI, will the assignment also replicated to backend in this case?
2. In case of new Company creation, is it possible for multiple company code assignments?
3. Is it possible to to pick the existing Company from the F4 list in the CR and assign the company code in the CR? How about the replication work in this case?
Please share your comments, Thank you.

Thanks Sanjay.
Just to summarize and a bit more specific, here is my understanding:
1. (a). You have mentioned that we can assign new company code also - does this mean i can select            a company code which is not in the F4 list? In such case, how will be the assignment                   replicated? It should ideally create a company code in the backend before the assignment is           processed.
    (b). Usually, if a new company code is created in backend, i need to load that in to MDG tables                 such that it will be active in MDG F4 list, for Company assignments in the Change request.
2.      Understood
3.      In the Change request, if i pick existing company from F4 values and edit company related data,          it will be replicated accordingly.
         In the same CR, if i give some value in the company code data, the replication will result in one          more assignment added to the company, so as on date, SAP has given the option of only                    additional assignments to the existing assignments.

How to display COMPANY CODE DESCRIPTION ON THE TOP LEFT OF PAGE

How to display COMPANY CODE DESCRIPTION(Field BUTXT) ON THE TOP LEFT OF EVERY PAGE OF THE REPORT GENERATED.
Actually I have collected BUTXT using
'select butxt into table itab from t001 where bukrs = p_bukrs'
where p_bukrs is the selection screen field.
REQUIREMENT: Depending on what company code we give on the selection screen, corresponding company code description(butxt) should be displayed at the top left of every page. how would i display it in TOP-OF-PAGE EVENT.

Hi
It's very simple, but what is the need to use <b>into table itab</b> in your select query.
Rather, define a variable
data: v_butxt type t001-butxt.
Select butxt into v_butxt from t001 where bukrs = pbukrs.
TOP-OF-PAGE.
write :/ v_butxt.
Regards
Surya.

How to activate company code field on selection screen of report pc00_m40_f24q ?

Similar Messages

Maybe you are looking for