How to activate IS-Retail in ECC6.0

Hi,
We are running ECC6.0 , Please sugegst how to activate IS-Retail in ECC6.0.
In Service market place i can find SAP-Retail master guide , it does not talk about IS-Reatil activation.
Please let me know , how to activate this.
- Kristene

Hello
This post is back.
We are going to upgrade our SAP system from 4.6C to ECC6 for SD/MM/WM/FI/CO.
We plan to implement just after this upgrade SAP Retail for fashion as our core system.
One of the advises we get is to activate a Retail parameter during the upgrade: it will ease the further implementation.
We have to analyse the impact on our upgrade project:
- what is this parameter ?
- are there any impacts on the existing modules ?
- the standard MM module is compatible with the Retail MM module ?
- is there any particular need in term of architecture we have to plan by activating the Retail parameter ?
In fact, why should we activate this parameter during the upgrade and not after the upgrade ?
Is there somebody who can help me ?
Thank you very much
Best regards
Vincent

Similar Messages

How to activate Retail system

Hello guys,
I need some urgent solution about how to activate EA-Retail extension set!!
I went to SPRO to activate. there it shows it is active... but in SPRO still plants are as Plant( which should change to Site)
also I can't run any Retail system tcode (Like MM41, MM42 etc.)
Please advise with the steps?
Thanks in Advance!

Hi Madhusudan,
Please refer Note 897714 - Activating Retail Short Text Replacement,this will solve your problem.
Reward points if helpful.
Regards,
Sam

How to activate the IS-Retail in ECC 6.0 R/3 system

Dear Guru's...........
Can any one tell me how to activate the IS-Retail in ECC 6.0 R/3 system.
I have IDES system in my home I donu2019t know how to activate retail settings.
Please suggest me how to do that.
Regards
dnr

Dear DNR,
SPRO --> IMG --> Activate SAP ECC Extensions (Or, T. Code: SFW5)
Go to Tab: Industry Business Function
Select Business Function Set: ISR_RETAIL - SAP Retail
A new line will be appeared below.
Current Status will be OFF. Click within Field: Current Status. It will pop-up a list. Select "X - ON".
Important: I've read somewhere - Once Activated, cannot Roll-back.
Best Regards,
Amit
Note: For more, go to - http://help.sap.com
Follow the menu tree: SAP for Industries/SAP for Retail
Click on the link for "SAP industry Specific Components"
Choose the document "Business Function Set Retail"
Also,
Check https://websmp103.sap-ag.de/erp-upgrade --> mySAP ERP 2005: Updated upgrade FAQs, there you will find the list of Industry solutions which are supported by mySAP ERP.
https://websmp103.sap-ag.de/~sapidb/011000358700006168472006/
You must this thread in to [Forum: SAP Enhancement Packages|/community [original link is broken]; OR [Forum: Enterprise Resource Planning (ERP)|Enterprise Resource Planning (SAP ERP); as Nowhere, it is related to SAP SD.

How to activate ABAP Dynrpo in SE80

Hi Experts,
I am using ECC 5.0, and I want to create a web dynpro using ABAP, but in SE80 transaction this option is deactivated, how to activate it ?

Hi Rajesh,
In ECC5.0 you can not work with webdynpro.
Its only avilable with Ecc6 versions.
Check this link also,
Re: ECC 5.0 or ECC 6.0?
Thanks.
Edited by: Viji on Apr 16, 2008 11:29 AM

Is-retail in ecc6.0

Hi,
we are installed ecc 6.0 server recently.I want to actiavte the is-retail on same server.plz any one give me the step by step to actiavte is-retail in ecc6.0.
thanku

Hello
This post is back.
We are going to upgrade our SAP system from 4.6C to ECC6 for SD/MM/WM/FI/CO.
We plan to implement just after this upgrade SAP Retail for fashion as our core system.
One of the advises we get is to activate a Retail parameter during the upgrade: it will ease the further implementation.
We have to analyse the impact on our upgrade project:
- what is this parameter ?
- are there any impacts on the existing modules ?
- the standard MM module is compatible with the Retail MM module ?
- is there any particular need in term of architecture we have to plan by activating the Retail parameter ?
In fact, why should we activate this parameter during the upgrade and not after the upgrade ?
Is there somebody who can help me ?
Thank you very much
Best regards
Vincent

How to activate JVA in ECC 6.0

hi,
i am learning by myself joint venture accounting,i am not sure whether its apart of IDES ECC6.0 or not, if it is part of ECC could any one please guide me how to activate JVA ,if it is not could any one please advise me which is the better way to practice JVA, is there any one providing online sandbox servers for practice,thanks

Hi Sri Ray,
Please find below screen shot, based on screen shot you can activate JVA accounting for your company code.
Please follow below instruction to activate JVA.
1.If Joint Venture Accounting is installed, it is not necessarily used for all company codes. To activate JVA for a company code, it has to be switched on in FI customizing but also in JVA..
The activation is done with this transaction. For the activation it has to be decided which JV ledgers should be used. The JV standard ledger is 4A for data collection and 4B as billing ledger. Every ledger can have one transaction currency and up to two local currencies. Since FI can have up to three local currencies, JV offered also the possibility to use an additional ledger - 4C as additional data collection ledger and 4D as additional billing ledger. But this additional ledger should only be used if necessary.
2.Please check also the currencies for the JVA ledger. The currencies for the collection ledgers should be identical to the currencies for the billing ledgers (e.g. currencies for ledger 4A are equal to currencies of 4B). Also those ledger should only use the currencies delivered from FI. If an additional curreny is added to the JV ledger, please keep in mind that those currencies are converted on line level (actually from FI-SL) and those currencies might not balance per document.
Thanks
Mallikarjuna

How to activate or set up iphone5s

how to activate iphone5s or set up without apple id?

You can check if the iPhone has been Activation Locked here:
https://www.icloud.com/activationlock/
If you are the original owner (not 2cd hand or used purchase) and have proof
of the original purchase. take the iPhone and that proof to a physical Apple
store and they may be able to assist. Make an appointment at the Genius Bar
to avoid delay.
http://www.apple.com/retail/geniusbar/
If you are not the original purchaser and the iPhone is Activation Locked, you will
have to find the person who initiated the Activation Lock to have them release it.
If you cannot find them or they refuse, return the iPhone for a refund. There is no
workaround for Activation Lock.

TS1292 how to activate my itunes card?

How to activate my itunes card?

What you normally should do when you have an iTunes card that has not been activated is go back the retailer from whom you purchased the card and discuss the problem with them. They should either correctly activate the card or give you a new one. If they refuse to help, as some retailers do, or you don't know or can't get to the retailer, go here:
iTunes Support
and follow the instructions to report the issue to the iTunes Store. They will ask for a scan of the front and back sides of the card as well as a scan of the receipt
Regards.

How to Activate the Table which Doesn't Exist - Can I create Table in SE11

Hi Gurus,
I am a BASIS Person ..so, I don't have much idea about ABAP Developement side . But, while applying patches to one of the SAP Component, I get the following error message ( usr\sap\trans\log ) :
Phase Import_Proper
>>>
SAPAIBIIP7.BID
1 ED0301 *************************************************************************
1 EDO578XFollowing objects not activated/deleted or activated/deleted w. warning:
1EEDO519X"Table" "WRMA_S_RESULT_DATA" could not be activated
1EEDO519 "Table Type" "WRMA_TT_UPDTAB_DSO" could not be activated
1 ED0313 (E- Row type WRMA_S_RESULT_DATA is not active or does not exist )
2WEDO517 "Domain" "WRMA_KAPPL" was activated (error in the dependencies)
2WEDO517 "Data Element" "/RTF/DE_FISCPER" was activated (error in the dependencies)
2WEDO517 "Data Element" "/RTF/DE_FISCVARNT" was activated (error in the dependencies)
2WEDO517 "Data Element" "WRMA_DE_RCLASV" was activated (error in the dependencies)
2WEDO517 "Data Element" "WRMA_DE_RMA_AMNT" was activated (error in the dependencies)
2WEDO517 "Data Element" "WRMA_DE_RMA_INV" was activated (error in the dependencies)
2WEDO517 "Data Element" "WRMA_DE_RMA_OBJ" was activated (error in the dependencies)
2WEDO549 "Table" "V_WRMA_TRCLASVER" was activated (warning for the dependent tables)
2WEDO549 "Table" "V_WRMA_TRCLASVPE" was activated (warning for the dependent tables)
2WEDO549 "Table" "V_WRMA_TRCLPERCL" was activated (warning for the dependent tables)
2WEDO549 "Table" "WRMA_S_STOCK_SELECTION_DATE" was activated (warning for the dependent tables)
<<<
Now, I checked Domain WRMA_KAPPL in SE11 and it diplays that it is partially active :
" The obeject is marked partially active for the following reasons :
   Errors occured when adjusting dependent Objects to a change. Some of the dependent objects could not
   be adjusted to this change. To adjust the dependent objects, you must perform the following actions
   the next time you activate this object.
                    - SET THE SYNP TIME STAMP IN THE RUNTIME OBJECT OFALL DEPENDENT OBJECTS
My question is - how to activate this SYNP Time Stamp.. ?
                      - Once I activate this SYNP Time Stamp.. How do I activate this ..in SE11 or some other
                        TCode..
Any / ALL Help is highy appreciated and would be rewarded with appropriate Reward Points.
Thanks,
Regards,
- Ishan
>> Ok, Now I forcefully activated the Domain and then all the 5 Data Elements in SE11 ...now I have error
     that table WRMA_S_RESULT_DATA and WRMA_TT_UPDTAB_DSO Could not be activated...
     ..And in SE11 > Input the first / Second Table > Excute > Output : Table Does not Exist !!!
      - Now, How do I activate something which does not exist in the first place ?
    Any Input about this ?
Thanks,
Regards,
- Ishan
Edited by: ISHAN P on Jun 19, 2008 3:44 PM

Read note 1152612 - Incorrect component type in structure WRMA_S_RESULT_DATA.
The error occurs in Release BI_CONT 703 Support Package 9.
If you require an advance correction for Support Package 9, make the following manual changes if the InfoObject 0TCTLSTCHG is inactive in your system.
1. Use transaction RSA1 to call the Data Warehousing Workbench.
2. Check whether the InfoObject 0TCTLSTCHG was already activated by the compilation process the first time you called transaction RSA1. You can use transaction RSD1 to check this by entering 0TCTLSTCHG in the "InfoObject" field and choosing "Display". Proceed as follows if the InfoObject is still not active:
3. Go to BI Content activation.
4. Select "Object Types".
5. Open the "InfoObjects" tree and select "Objects".
6. Search for the InfoObject 0TCTLSTCHG and select it.
7. Transfer the object and activate it.
These steps activate the required component type /BI0/OITCTLSTCHG. You can check again in transaction RSD1 to ensure that the InfoObject 0TCTLSTCHG is available as active.
Jacek Fornalczyk

How to activate the ATP buckets in APO?

Hi,
We are in the process of changing the ATP buckets in our APO system.
I know the Path in the configuration:
Advanced Planning and Optimization -> Global Available-to-Promise (Global ATP) -> General Settings -> Maintain Global Settings for Availability Check
On the left side you will get three sections:
Global Settings
ATP Buckets (Active)
ATP Buckets (Planned)
I can change the values in (example field Shift Receipt Bucket) the ATP Buckets (Planned) section and save it with a transport. Now the question is how to activate the buckets. Is there another transaction for this? SAP Help doesn't specify how to activate.
Any ideas are highly appreciated.
Thanks,
Mahesh

Hi,
To activate the buckets one need to check the box 'Current' in the options under ATP Buckets (Active). Also, as referred earlier by Dipthi do look up the documentation under:
SAP Advanced Planning and Optimization (SAP APO) -> Global Available-to-Promise (Global ATP) -> Settings for Global ATP -> General Settings for Global ATP ->Definition of Buckets for ATP Time Series ->Activation of Bucket Parameters for ATP Time Series.
The details are as beneath:
Use
If you change bucket parameters (see Definition of Buckets for ATP Time Series), these must be activated subsequently for the ATP time series.
Features
The system activates the bucket parameters in the following situations:
Since activation in each of the situations described below leads to downtime, you should change bucket parameters less frequently than other Customizing settings.
·        Creating the active planning version for a client using transaction /SAPAPO/MVM
If you set up a system again, you should process the bucket parameters before you create the active planning version. The bucket parameters are thus activated automatically.
·        Initializing SAP liveCache for all clients using transaction LC10
In the case of an upgrade, you should process the bucket parameters before activating SAP liveCache. The bucket parameters are then activated automatically.
·        Executing the report /SAPAPO/OM_ATP_REBUILD_TS
The system only rebuilds the ATP time series here.
In this case, the SAP liveCache administrator must execute the following steps:
                            a.      Shut down SAP liveCache.
                            b.      Replace the com-file registration:
                                                  i.       At command line level, go to the SAP subdirectory of the SAP liveCache installation.
                                                ii.       Under Microsoft Windows, save the original registration files SAPAPO.lst and SAPATP.lst (UNIX: libSAPAPO.lst and libSAPATP.lst), for example, by renaming or copying to another directory.
                                               iii.       Under Microsoft Windows, rename the registration file SAPAPO_REBUILD.lst as SAPAPO.lst (UNIX: libSAPAPO_REBUILD.lstas libSAPAPO.lst) or copy it to another directory.
                                               iv.       Under Microsoft Windows, rename the registration file SAPATP_REBUILD.lst as SAPATP.lst (UNIX: libSAPATP_REBUILD.lstas libSAPATP.lst) or copy it to another directory.
                            c.      Launch SAP liveCache.
                            d.      Execute the report /SAPAPO/OM_ATP_REBUILD_TS.
                            e.      Shut down SAP liveCache.
                              f.      Replace the com-file registration by replacing the registration files SAPAPO.lst and SAPATP.lst (UNIX: libSAPAPO.lst and libSAPATP.lst) with the original versions under Microsoft Windows.
                            g.      Launch SAP liveCache.
Regards
Vinod

How to activate all inactive objects for current user

Hi
How to activate all inactive objects for current user ...
... I have found a (long winded) way to do this:
- Environment / Inactive Objects
- Add to Worklist
- Display Worklist
- Select All
- Activate
this will open a dialog titled "Inactive Objects for <username>"
which has the exact functionality I need ... but I can't figure out how to get to this dialog directly - without so many intermediate steps
the SAP docs repeatedly mention the ability to activate the inactive worklist - but do not mention how
does anybody know the TCode for this dialog?
thanks
ps does the term "mass activation" apply to importing change requests rather than development activation?
Edited by: FireBean500 on Jun 4, 2010 11:07 PM

No other way. But usually it's far more simple as all objects are already in our own worklist.
I wonder why your objects are not already in your worklist, as everytime you create or maintain an object, it is added to your worklist.

I bought an ipod touch 5 from Dubai carrefour. Th seller told me that the ipod that ı bought has a facetime . But when ı want to activate ipod ı couldnt see the facetime app. Please show me how ı could activate facetime.

I bought an ipod touch 5 from Dubai carrefour. Th seller told me that the ipod that ı bought has a facetime . But when ı want to activate ipod ı couldnt see the facetime app. Please show me how ı could activate facetime.

If FaceTime is not hidden by Restrictions (Settings>General<Restrictions) you got duped. iPods officially sold in Dubai and some other countries that prohibit FT do not have FT and there is not way to get FT on those iPods.

How to activate Events Calendar Sample Application's Weekly and Daily View?

Does anyone know how to activate the Weekly and Daily View for the sample calendar application called "Events?" I am trying to generate, or incorporate, a calendar application based upon the sample application provided by Oracle. I have installed the sample application but I am unable to view the calendar in daily or weekly formats. Any assistance would be appreciated. Thanks in-advance.

Hi,
If the calendar was set up to only use the Monthly view, then you will be missing a number of items on your page.
The simplest thing to do would be to create a new calendar page in your copy of your sample app and then identify those items that are missing from your original page. These should be Monthly/Weekly/Daily buttons, Adjust Calendar Date - Monthly/Weekly/Daily processes and a hidden Pnn_CALENDAR_TYPE page item that holds the currently displayed type.
Andy

MY APP STORE IS NOT WORKING.HOW TO ACTIVATE IT?

MY APP STORE IS NOT WORKING.HOW TO ACTIVATE IT?

Hi sahaabhijeet,
The resource below explains how to use the App Store on your iPhone:
App Store Frequently Asked Questions (FAQ) - Apple Support
http://support.apple.com/en-us/HT2001
The App Store is a place where you can download new applications for your iPhone or iPod touch. You can browse the App Store on your computer with iTunes, or by tapping App Store on your iPhone, iPad, or iPod touch.
Do I need to sign up for a new account to shop the App Store?
If you already have an iTunes Store account, you can shop the App Store. If you do not have an iTunes Store account, you can create one using iTunes. Verify that the country flag at the bottom of the iTunes Store home page displays your country, then choose Store > Create Account. Click here for a way to set up an iTunes App Store account without a credit card. You can also create an iTunes Store account directly from your iPhone, iPad, or iPod touch by following these instructions.
Accepted payment types
Shopping the App Store requires an iTunes Store account. When you create an iTunes Store account, you must provide a payment method for your purchase. The available payment methods vary by country, but typically you can use credit cards, gift cards, store credit, or PayPal.
In countries where the iTunes Store only sells applications, the accepted payment methods are Visa, MasterCard, and American Express. Other payment types such as gift cards, store credit, monthly allowances, and PayPal are not accepted. Depending on your App Store country, prices are listed in either US Dollars or Euros.
What can I purchase from the App Store?
At the App Store, you can browse and download applications for your iPhone, iPad, or iPod touch. Applications from the App Store can be downloaded to, but not used on, your computer. To use an application from the App Store, simply sync it to your iPhone, iPad, or iPod touch. The App Store is also available on iPhone, iPad, or iPod touch1 and works over mobile phone networks and Wi-Fi, so you can download applications wirelessly and start using them instantly.
To use applications or the App Store with iPhone, iPad, or iPod touch, you must have iOS 2.0 or later installed on your iPhone or iPod touch, and iOS 3.2 or later on iPad.
Some applications are not available in all countries. Application availability and pricing are subject to change.
Cheers,
Judy

How to Activate a Condition Type in the Tax OCde for A/P -- Very Urgent

Hi Peers
I'm creating a new Tax Code in T.Code FTXP, while creating, One Condition Type is Deactivated, say JM01, How to activate that condition Type. I know how to activate the Condition Type in A/R side but I want to know it in A/P side. Plz help. Its very urgent.
Regards
Rajaram

Hi Rajaram,
U pls Check ur configuration. First u check the calculation procedure (F.A- Tax on sales & purchase-Basic setting-Check calculation procedure _ Define procedure) In the procedure field u check JM01 is activated or deactivated otherwise u created in condition Type.
I think its usefull otherwise u let me know
Thanks
R.Manigandan

How to activate IS-Retail in ECC6.0

Similar Messages

Maybe you are looking for