How to activate Retail system

Hello guys,
I need some urgent solution about how to activate EA-Retail extension set!!
I went to SPRO to activate. there it shows it is active... but in SPRO still plants are as Plant( which should change to Site)
also I can't run any Retail system tcode (Like MM41, MM42 etc.)
Please advise with the steps?
Thanks in Advance!

Hi Madhusudan,
Please refer Note 897714 - Activating Retail Short Text Replacement,this will solve your problem.
Reward points if helpful.
Regards,
Sam

Similar Messages

How to activate myself system

Hello:
I have a very basic question. We just installed our BW 3.5 and I am trying to learn how to create an infocube copy. I read that we need a data mart interface in the myself system to transfer data, but I can't find myself system on the source systems tree. Any help is appreciated.

Hi,
It is surprising to know that you donot have Self system as one of the source. Becasue system creates it automatically . So I hope, sombody might have deleted it. You better contact your Basis guy and ask him to create it. We can follow the same steps that we do in the creation of R/3 as source system .
With rgds,
Anil Kumar Sharma . P

Activate retail in ECC 6.0

Dear All,
Please guide 1. How to activate retail system in ECC 6.0 and 2. What are the differences after activating Retail and 3. Any other settings required in customization ?

Hello,
Please see information on Retail scenario in the following notes:
1075202 - FAQ: Setting the retail switch
1227242 -FAQ: Differences between material master & article
Regards,

How to activate the IS-Retail in ECC 6.0 R/3 system

Dear Guru's...........
Can any one tell me how to activate the IS-Retail in ECC 6.0 R/3 system.
I have IDES system in my home I donu2019t know how to activate retail settings.
Please suggest me how to do that.
Regards
dnr

Dear DNR,
SPRO --> IMG --> Activate SAP ECC Extensions (Or, T. Code: SFW5)
Go to Tab: Industry Business Function
Select Business Function Set: ISR_RETAIL - SAP Retail
A new line will be appeared below.
Current Status will be OFF. Click within Field: Current Status. It will pop-up a list. Select "X - ON".
Important: I've read somewhere - Once Activated, cannot Roll-back.
Best Regards,
Amit
Note: For more, go to - http://help.sap.com
Follow the menu tree: SAP for Industries/SAP for Retail
Click on the link for "SAP industry Specific Components"
Choose the document "Business Function Set Retail"
Also,
Check https://websmp103.sap-ag.de/erp-upgrade --> mySAP ERP 2005: Updated upgrade FAQs, there you will find the list of Industry solutions which are supported by mySAP ERP.
https://websmp103.sap-ag.de/~sapidb/011000358700006168472006/
You must this thread in to [Forum: SAP Enhancement Packages|/community [original link is broken]; OR [Forum: Enterprise Resource Planning (ERP)|Enterprise Resource Planning (SAP ERP); as Nowhere, it is related to SAP SD.

Activate Retail Switch in IDES ecc5 window

How to activate Retail Switch in SAP ECC 5.0 SR1 (IDES Version) windows based.
Regards,
King V.

IDES IS-Retail Package Needs to be installed explicitly.Unfortunately, I dont have one so if you have that IS-Retail Package for IDES IS-Retail or The Path from where i can down load this.
Note: 611767 Check this out.
Regards,
King V.

HOW TO USE R/3 AS AN RETAIL SYSTEM?

HI FRIENDS
I HAVE INSTALLED SAP 4.7 IDES. I WANT TO USE IT SA AN RETAIL SYSTEM. WHAT ARE THE SETTINGS NEED TO UTILISE AS A RETAIL SYSTEM.
THANKS IN ADVANCE

take a look on this thread..
How to activate IS-Retail in ECC6.0
cheers

How to activate IS-Retail in ECC6.0

Hi,
We are running ECC6.0 , Please sugegst how to activate IS-Retail in ECC6.0.
In Service market place i can find SAP-Retail master guide , it does not talk about IS-Reatil activation.
Please let me know , how to activate this.
- Kristene

Hello
This post is back.
We are going to upgrade our SAP system from 4.6C to ECC6 for SD/MM/WM/FI/CO.
We plan to implement just after this upgrade SAP Retail for fashion as our core system.
One of the advises we get is to activate a Retail parameter during the upgrade: it will ease the further implementation.
We have to analyse the impact on our upgrade project:
- what is this parameter ?
- are there any impacts on the existing modules ?
- the standard MM module is compatible with the Retail MM module ?
- is there any particular need in term of architecture we have to plan by activating the Retail parameter ?
In fact, why should we activate this parameter during the upgrade and not after the upgrade ?
Is there somebody who can help me ?
Thank you very much
Best regards
Vincent

How to Create Merchandise Category Reference Article in IS-Retail system

Hi Experts,
Is there any separate Tcode to create Merchandise Category Reference articles in IS-RETAIL system.
Whether Merchandise Category reference article is created as normal article in MM41 only?
Whether we can assign any of the article that is created in that merchandise category as reference article in WG21 (or) is there any separate Tcode to create Reference articles.
During Retail Implementation projects, how Merchandise Category reference article are handled???
Any Input is highly appreciated.
Thanks and Regards,
Selvakumar.M

Hi,
With Tcode WG21 u can create MC ref. article. It is a way to create MC ref article. No need to use MM41.
Regards,
Rahul

How to de-activate source system in BI system...?

How to de-activate source system in BI system...?
Regs,
Naren..

Hi,
I feel we cant de activate the source system. Either we can aceive to do any of the following method:
1. Delete the source system
2. Remove the RFC Destination.
3. Remove the authorization to load the data.
I dont know why you are asking to deactivate the system. Coz this will not cuase any problem to you for any testing in the landscape. One more thing if you will do any of the above three activity, then Basic guys only rollback the actual situation.
So please be confident before doing this task.
Regards,
Vivek V

I am having trouble installing photoshop Lightroom. I have the S/N #... I need it to be confirmed and activated so i can receive an email to activate the system to my computer. I am not sure how to go about doing so.

I am having trouble installing photoshop Lightroom. The program is installed and has some sections blocked off. I have the S/N #... I need it to be confirmed and activated so i can receive an email to activate the system to my computer. I am not sure how to go about doing so.

If you have a serial number, you simply need to enter it into the proper fields.
Since you don't say what version of Lightroom, and what sections are "blocked off", let me guess that you have Lightroom CC, and you need to enter the serial number to turn it into Lightroom 6. Here are the instructions: Adobe Photoshop Lightroom Help | Serialize Lightroom CC trial to activate as Lightroom 6
And if that's not the right assumption, then please give us the details.

ReSizing to existing retail system if activate batch management

Hi Experts
We have a SAP ERP retail system, the retail industry solution was implemented a few years ago.
We are implementing improvements on the existing Retail System (post golive activities), we add modifications in master data activating the batch management to materials.
We will be have additional users too.
We are adding load on the system with the additional users and we are increasing the disk requeriments for additional information (to the batch management) in the existing table records and
to the future records.
We have the latest version of the retail sizing questionnaire "Retail_Sizing_20080715.xls" obtained from http://service.sap.com/sizing but
I need to know if we have to fill it to obtain the new hardware estimation (taking into account it is not a new configuration, is a post golive activity).
Our scenario need a re-sizing because we are extending an existing system by load (additional users) and we need the calculation for disk requeriments to the additional
information and the calculation for CPU and memory requeriments to minimize the impact of these changes on the system performance.
Is the retail sizing questionnaire right to our scenario?
How I can to calculate the new load on the system?
Is right calculate the future load in our retail system monitoring the current resource utilization to CPU, table growth (and including new fields), and memory usage?
Thanks in advanced for your cooperation, please let me know if you need additional information.
omm

additing t o about post system also check if ur having stock for last year last period, it should be also zero
best this will be
make the stock zero and the change the indicator either in MM02 or In tabel MARC
and then post the stock back with batchs
hope this helps
Reward if usefull

How to activate netweaver in ECC 6.0 EHP6 system

Dear friends,
We are using EHP6 IDES server, in that i want to use net weaver , please let me confirm my points.
1) How to activate netweaver in ECC 6 with EHP6 server.
2)how to create link for that server access from browser .
3)How to activate webdynpro .
Please provide me step by step procedure for activating NetWeaver in EHP6 server

1 - You don't activate Netweaver in an ECC system. Netweaver is a technology platform and products are based on that.
2 - Configure Web GUI. Refer to this blog - http://scn.sap.com/docs/DOC-29485
3 - If your question is about activating Web Dynpro services then read this link
Activating Web Dynpro Services - Search - SAP Library
Regards
RB

How to activate HTTP port in R3 system?

Hi All
In SMICM transaction i am not getting Http port. I think its not activated.
Can anyone please tell me how to activate HTTP port in R3.
Please help me?
Regards
Sowmya

Hi,
You just have to set the profile parameters that are described in the documentation that you should have read.
Regards,
Olivier

How to Activate the Table which Doesn't Exist - Can I create Table in SE11

Hi Gurus,
I am a BASIS Person ..so, I don't have much idea about ABAP Developement side . But, while applying patches to one of the SAP Component, I get the following error message ( usr\sap\trans\log ) :
Phase Import_Proper
>>>
SAPAIBIIP7.BID
1 ED0301 *************************************************************************
1 EDO578XFollowing objects not activated/deleted or activated/deleted w. warning:
1EEDO519X"Table" "WRMA_S_RESULT_DATA" could not be activated
1EEDO519 "Table Type" "WRMA_TT_UPDTAB_DSO" could not be activated
1 ED0313 (E- Row type WRMA_S_RESULT_DATA is not active or does not exist )
2WEDO517 "Domain" "WRMA_KAPPL" was activated (error in the dependencies)
2WEDO517 "Data Element" "/RTF/DE_FISCPER" was activated (error in the dependencies)
2WEDO517 "Data Element" "/RTF/DE_FISCVARNT" was activated (error in the dependencies)
2WEDO517 "Data Element" "WRMA_DE_RCLASV" was activated (error in the dependencies)
2WEDO517 "Data Element" "WRMA_DE_RMA_AMNT" was activated (error in the dependencies)
2WEDO517 "Data Element" "WRMA_DE_RMA_INV" was activated (error in the dependencies)
2WEDO517 "Data Element" "WRMA_DE_RMA_OBJ" was activated (error in the dependencies)
2WEDO549 "Table" "V_WRMA_TRCLASVER" was activated (warning for the dependent tables)
2WEDO549 "Table" "V_WRMA_TRCLASVPE" was activated (warning for the dependent tables)
2WEDO549 "Table" "V_WRMA_TRCLPERCL" was activated (warning for the dependent tables)
2WEDO549 "Table" "WRMA_S_STOCK_SELECTION_DATE" was activated (warning for the dependent tables)
<<<
Now, I checked Domain WRMA_KAPPL in SE11 and it diplays that it is partially active :
" The obeject is marked partially active for the following reasons :
   Errors occured when adjusting dependent Objects to a change. Some of the dependent objects could not
   be adjusted to this change. To adjust the dependent objects, you must perform the following actions
   the next time you activate this object.
                    - SET THE SYNP TIME STAMP IN THE RUNTIME OBJECT OFALL DEPENDENT OBJECTS
My question is - how to activate this SYNP Time Stamp.. ?
                      - Once I activate this SYNP Time Stamp.. How do I activate this ..in SE11 or some other
                        TCode..
Any / ALL Help is highy appreciated and would be rewarded with appropriate Reward Points.
Thanks,
Regards,
- Ishan
>> Ok, Now I forcefully activated the Domain and then all the 5 Data Elements in SE11 ...now I have error
     that table WRMA_S_RESULT_DATA and WRMA_TT_UPDTAB_DSO Could not be activated...
     ..And in SE11 > Input the first / Second Table > Excute > Output : Table Does not Exist !!!
      - Now, How do I activate something which does not exist in the first place ?
    Any Input about this ?
Thanks,
Regards,
- Ishan
Edited by: ISHAN P on Jun 19, 2008 3:44 PM

Read note 1152612 - Incorrect component type in structure WRMA_S_RESULT_DATA.
The error occurs in Release BI_CONT 703 Support Package 9.
If you require an advance correction for Support Package 9, make the following manual changes if the InfoObject 0TCTLSTCHG is inactive in your system.
1. Use transaction RSA1 to call the Data Warehousing Workbench.
2. Check whether the InfoObject 0TCTLSTCHG was already activated by the compilation process the first time you called transaction RSA1. You can use transaction RSD1 to check this by entering 0TCTLSTCHG in the "InfoObject" field and choosing "Display". Proceed as follows if the InfoObject is still not active:
3. Go to BI Content activation.
4. Select "Object Types".
5. Open the "InfoObjects" tree and select "Objects".
6. Search for the InfoObject 0TCTLSTCHG and select it.
7. Transfer the object and activate it.
These steps activate the required component type /BI0/OITCTLSTCHG. You can check again in transaction RSD1 to ensure that the InfoObject 0TCTLSTCHG is available as active.
Jacek Fornalczyk

How to activate the ATP buckets in APO?

Hi,
We are in the process of changing the ATP buckets in our APO system.
I know the Path in the configuration:
Advanced Planning and Optimization -> Global Available-to-Promise (Global ATP) -> General Settings -> Maintain Global Settings for Availability Check
On the left side you will get three sections:
Global Settings
ATP Buckets (Active)
ATP Buckets (Planned)
I can change the values in (example field Shift Receipt Bucket) the ATP Buckets (Planned) section and save it with a transport. Now the question is how to activate the buckets. Is there another transaction for this? SAP Help doesn't specify how to activate.
Any ideas are highly appreciated.
Thanks,
Mahesh

Hi,
To activate the buckets one need to check the box 'Current' in the options under ATP Buckets (Active). Also, as referred earlier by Dipthi do look up the documentation under:
SAP Advanced Planning and Optimization (SAP APO) -> Global Available-to-Promise (Global ATP) -> Settings for Global ATP -> General Settings for Global ATP ->Definition of Buckets for ATP Time Series ->Activation of Bucket Parameters for ATP Time Series.
The details are as beneath:
Use
If you change bucket parameters (see Definition of Buckets for ATP Time Series), these must be activated subsequently for the ATP time series.
Features
The system activates the bucket parameters in the following situations:
Since activation in each of the situations described below leads to downtime, you should change bucket parameters less frequently than other Customizing settings.
·        Creating the active planning version for a client using transaction /SAPAPO/MVM
If you set up a system again, you should process the bucket parameters before you create the active planning version. The bucket parameters are thus activated automatically.
·        Initializing SAP liveCache for all clients using transaction LC10
In the case of an upgrade, you should process the bucket parameters before activating SAP liveCache. The bucket parameters are then activated automatically.
·        Executing the report /SAPAPO/OM_ATP_REBUILD_TS
The system only rebuilds the ATP time series here.
In this case, the SAP liveCache administrator must execute the following steps:
                            a.      Shut down SAP liveCache.
                            b.      Replace the com-file registration:
                                                  i.       At command line level, go to the SAP subdirectory of the SAP liveCache installation.
                                                ii.       Under Microsoft Windows, save the original registration files SAPAPO.lst and SAPATP.lst (UNIX: libSAPAPO.lst and libSAPATP.lst), for example, by renaming or copying to another directory.
                                               iii.       Under Microsoft Windows, rename the registration file SAPAPO_REBUILD.lst as SAPAPO.lst (UNIX: libSAPAPO_REBUILD.lstas libSAPAPO.lst) or copy it to another directory.
                                               iv.       Under Microsoft Windows, rename the registration file SAPATP_REBUILD.lst as SAPATP.lst (UNIX: libSAPATP_REBUILD.lstas libSAPATP.lst) or copy it to another directory.
                            c.      Launch SAP liveCache.
                            d.      Execute the report /SAPAPO/OM_ATP_REBUILD_TS.
                            e.      Shut down SAP liveCache.
                              f.      Replace the com-file registration by replacing the registration files SAPAPO.lst and SAPATP.lst (UNIX: libSAPAPO.lst and libSAPATP.lst) with the original versions under Microsoft Windows.
                            g.      Launch SAP liveCache.
Regards
Vinod

How to activate Retail system

Similar Messages

Maybe you are looking for