How to add a new Portal instance in 10.1.2
In previous versions of AS,were able to create new portal instances by running the portal configuration assistant like this:
ptlasst -mode PORTAL -s <portal_schema_to_create> -c <db_conn> -p <password> -demo report
it was possible to have several independent portal schemas in one database, and it doesn't matter if it was the infrastructure database or a custom database. In this new release of AS (10.1.2.0.2) i didn't see anything in the documentation that refers this, i know that ptlasst was replaced by ptlconfig, but ptlconfig does not have any option like that one, or at least not that simple (with a little effort i was able to see what were the commands that repca executes to create a new portal, and changing them and executing them agaim i was able to create new portal schemas, but i dont believe that this is the rigth way to do it, its too hard).
Does anyone now if its possible to add new portal instances in the same database in AS10.1.2.0.2?
Thanks in advance,
Tony Cruz
You may want to refer to the Oracle Application Server Installation Guide for more information. Chapter 6, "Installing OracleAS Infrastructure" provides information about creating a new Metadata Repository in an existing database and in a new database.
To access the installation guide, go to the Oracle Application Server Documentation page on OTN:
http://www.oracle.com/technology/documentation/appserver.html
Under the 'Release Notes, Installation, and Upgrade Documentation' section, click 'View Library' for the platform on which you are performing the installation.
Message was edited by:
lrajesh
Similar Messages
-
How to add a new element to a model node in the view controller?
View Context
myNode
attri1
attri2
myNode is a web service model node. How to add a new element to this node?
Regards,
Hui
Edited by: Hui Wang on Feb 15, 2008 12:05 PMSudhir Gorantla wrote:>
> Hi,
>
> myNode
> attri1
> attri2
>
> IMyNodeElement ele=wdContext.myNode().createMyNodeElement();
>
> ele.setAttri1("");
> ele.setAttri2("");
>
> wdContext.nodeMyNode().addElement(ele);
>
> Regards,
> Sudhir
Hi we need a model as an input parameter when creating a element for a model node. How to get the instance of the model?
Regards,
Hui -
How to add a new universe in population for Predictive Analysis
Post Author: izhar
CA Forum: Performance Management and Dashboards
Hi all members I am working on BOXI R2, SP2 I have to ask that, How to add a new universe in population for "Predictive Analysis". Currently i can only view universe of "Direct Customers and Direct Products"
Any member please help me hereRegards IzharHi Anne,
It really depends on how your portal is set up. And there are 101 ways this could have been done.
I've used the Home Page Framework as an easy to define and extend framework to show applications. I've used it both for ESS and MSS, Using the HPF requires that an application has an iView in the portal.
The main point to be made here is that this is not a Web Dynpro ABAP specific question - but rather one about MSS portal implementation - you would probably be better posting a question in either one of the ESS/MSS or Portal forums.
As it is not a WDA specific question, I'd ask that you kindly close this thread and reopen in another forum.
Thanks for your understanding, it would be nice to be able to answer all questions in all forums (perhaps with some sort of tagging system) but currently forum rules are that questions must be specific to the forum posted.
Thanks,
Chris -
How to add a new j2ee server to PI system?
how to add a new j2ee server for our PI product system?
Is it to execute 'install dialog instance ' steps?
ThanksHello
I have moved this thread to the Netweaver Administrator forum (this is not a PI technical issue). You have a better chance of getting a quality answer to your query in the Netweaver Administrator forum.
Take the notes below into consideration after you have added the java node.
1) #734931 Using a J2EE cluster in the XI 3.0/7.0 environment
2) #1079478 Using a J2EE Cluster in the PI 7.10 environment
Can anyone assist with how to add a java node?
Regards
Mark Smyth
XI/PI Moderator -
Hi for past 3 days i was thinking and breaking my head on how to add entire new at top table created in pdf report from c# windows forms with iTextSharp.
First: I was able to create/export sql server data in form of table in pdf report from c# windows forms. Given below is the code in c#.
using System;
using System.Collections.Generic;
using System.Configuration;
using System.Text;
using System.Data;
using System.IO;
using System.Data.SqlClient;
using System.Windows.Forms;
using iTextSharp.text;
using iTextSharp.text.pdf;
namespace DRRS_CSharp
public partial class frmPDFTechnician : Form
public frmPDFTechnician()
InitializeComponent();
private void btnExport_Click(object sender, EventArgs e)
Document doc = new Document(PageSize.A4.Rotate());
var writer= PdfWriter.GetInstance(doc, new FileStream("Technician22.pdf", FileMode.Create));
doc.SetMargins(50, 50, 50, 50);
doc.SetPageSize(new iTextSharp.text.Rectangle(iTextSharp.text.PageSize.LETTER.Width, iTextSharp.text.PageSize.LETTER.Height));
doc.Open();
PdfPTable table = new PdfPTable(7);
table.TotalWidth=585f;
table.LockedWidth = true;
PdfPTable inner = new PdfPTable(1);
inner.WidthPercentage = 115;
PdfPCell celt=new PdfPCell(new Phrase(new Paragraph("Institute/Hospital:AIIMS,NEW DELHI",FontFactory.GetFont("Arial",14,iTextSharp.text.Font.BOLD,BaseColor.BLACK))));
inner.AddCell(celt);
Paragraph para = new Paragraph("DCS Clinical Report-Technician wise", FontFactory.GetFont("Arial", 14, iTextSharp.text.Font.BOLD, BaseColor.BLACK));
para.Alignment = iTextSharp.text.Element.TITLE;
iTextSharp.text.Image png = iTextSharp.text.Image.GetInstance("logo5.png");
png.ScaleToFit(95f, 95f);
png.Alignment = Element.ALIGN_RIGHT;
SqlConnection conn=new SqlConnection("Data Source=NPD-4\\SQLEXPRESS;Initial Catalog=DRRS;Integrated Security=true");
SqlCommand cmd = new SqlCommand("Select t.technician_id,td.Technician_first_name,td.Technician_middle_name,td.Technician_last_name,t.technician_dob,t.technician_sex,td.technician_type from Techniciandetail td,Technician t where td.technician_id=t.technician_id and td.status=1", conn);
conn.Open();
SqlDataReader dr;
dr = cmd.ExecuteReader();
table.AddCell("ID");
table.AddCell("First Name");
table.AddCell("Middle Name");
table.AddCell("Last Name");
table.AddCell("DOB" );
table.AddCell("Gender");
table.AddCell("Designation");
while (dr.Read())
table.AddCell(dr[0].ToString());
table.AddCell(dr[1].ToString());
table.AddCell(dr[2].ToString());
table.AddCell(dr[3].ToString());
table.AddCell(dr[4].ToString());
table.AddCell(dr[5].ToString());
table.AddCell(dr[6].ToString());
dr.Close();
table.SpacingBefore = 15f;
doc.Add(para);
doc.Add(png);
doc.Add(inner);
doc.Add(table);
doc.Close();
The code executes well with no problem and get all datas from tables into table in PDF report from c# windows forms.
But here is my problem how can i align Title(DCS Clinical Report-Technician wise) center of pdf report with image named:logo5.png immediately coming to it's right?.
As the problem i am facing is my title or Header(DCS Clinical Report-Technician wise) is at top of my image named:logo5.png and not coming to it's center position of my image.
Second the problem i am facing is how to add new entire row to top of existing table in pdf report from c# windows form using iTextSharp?.
given in below is the row and it's data . So how do i add the given below row and it's data to my top my table in pdf report from c# windows forms using itextsharp?
as you can see how i create my columns in table in pdf report and populate it with sql server data. Given the code below:
Document doc = new Document(PageSize.A4.Rotate());
var writer= PdfWriter.GetInstance(doc, new FileStream("Technician22.pdf", FileMode.Create));
doc.SetMargins(50, 50, 50, 50);
doc.SetPageSize(new iTextSharp.text.Rectangle(iTextSharp.text.PageSize.LETTER.Width, iTextSharp.text.PageSize.LETTER.Height));
doc.Open();
PdfPTable table = new PdfPTable(7);
table.TotalWidth=585f;
table.LockedWidth = true;
Paragraph para = new Paragraph("DCS Clinical Report-Technician wise", FontFactory.GetFont("Arial", 14, iTextSharp.text.Font.BOLD, BaseColor.BLACK));
para.Alignment = iTextSharp.text.Element.TITLE;
iTextSharp.text.Image png = iTextSharp.text.Image.GetInstance("logo5.png");
png.ScaleToFit(95f, 95f);
png.Alignment = Element.ALIGN_RIGHT;
SqlConnection conn=new SqlConnection("Data Source=NPD-4\\SQLEXPRESS;Initial Catalog=DRRS;Integrated Security=true");
SqlCommand cmd = new SqlCommand("Select t.technician_id,td.Technician_first_name,td.Technician_middle_name,td.Technician_last_name,t.technician_dob,t.technician_sex,td.technician_type from Techniciandetail td,Technician t where td.technician_id=t.technician_id and td.status=1", conn);
conn.Open();
SqlDataReader dr;
dr = cmd.ExecuteReader();
table.AddCell("ID");
table.AddCell("First Name");
table.AddCell("Middle Name");
table.AddCell("Last Name");
table.AddCell("DOB" );
table.AddCell("Gender");
table.AddCell("Designation");
while (dr.Read())
table.AddCell(dr[0].ToString());
table.AddCell(dr[1].ToString());
table.AddCell(dr[2].ToString());
table.AddCell(dr[3].ToString());
table.AddCell(dr[4].ToString());
table.AddCell(dr[5].ToString());
table.AddCell(dr[6].ToString());
dr.Close();
table.SpacingBefore = 15f;
doc.Add(para);
doc.Add(png);
doc.Add(table);
doc.Close();
So my question is how to make my column headers in bold?
So these are my questions.
1. how can i align Title(DCS Clinical Report-Technician wise) center of pdf report with image named:logo5.png immediately coming to it's right?.
2. how do i add the given below row and it's data to my top my table in pdf report from c# windows forms using itextsharp?
3.how to make my column headers in bold?
I know that i have to do some modifications to my code but i dont know how to do it. Can anyone help me please.
Any help or guidance in solving this problem would be greatly appreciated.
vishalHi,
>>1. how can i align Title(DCS Clinical Report-Technician wise) center of pdf report with image named:logo5.png immediately coming to it's right?.
2. how do i add the given below row and it's data to my top my table in pdf report from c# windows forms using itextsharp?
3.how to make my column headers in bold?<<
I’m sorry for the issue that you are hitting now.
This itextsharp is third party control, for this issue, I recommended to consult the control provider directly, I think they can give more precise troubleshooting.
http://sourceforge.net/projects/itextsharp/
Thanks for your understanding.
Regards,
Marvin
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey. -
SQL Server Distributed Partitioning Views how to add a new node online
We are using distributed partitioning views in SQL Server 2012 Enterprise Edition for scaling out our data across more than one servers. Now we faced to question how to add a new node (server) into the scale outed db servers system without sending the servers
down, so our users will be able to use them during the process as well.
For example we have 4 servers with scaled out data. When we add the new empty server, the CHECKINGs for the partitioning columns should be reorganized. But during the process the partitioning views are not working.
The High Availability, Always On or Failover Cluster approaches seem are not resolve the problems.
So my question is how to add new node online?
KHThank you Erland for the reply.
Yes, it's sounds as possible solution but has some not resolvable nuance in it. Let's say we copied some data from Node5 to new added Node6. Let's assume in Node5 we had data in Table1 with partitioning column's values 100,101,102,103,104,105,106. Now
we want to copy part of the rows with partitioning column's values 103,104,105,106 from Node5.Table1 into Node6.Table1. With this Node5 will contain less data and will work more quickly (less IO, less CPU usage etc), and the rest data will be contained on
Node6. But because of Node5 is already in use, the Node5.Table1 contains CHECK CONSTRAINT = ParttionColumn should be from 100 up to 106. This is check for Node5. The Distributed Partitioning Views are already using the CHECKs to identify what server should
be used to get data from.
Now when we copied part of the Node5.Table1 rows to Node6.Table1 the views are still using the 103-106 rows from Node5.Table1 because the CHECK points there. Then we include the newest Node6.Table1 in the distributed partitioning views. OK, but we should
set some CHECK on new Node6.Table1 which will be used by views. We can't set intersecting checking like Node5 has CHECK 100-106 and Node6 has CHECK 103-106. We also can't edit Node5 check and set it 100-102 untill the data will be removed in it. But this means
that the data will not be available during the execution.
So, any ideas ?
KH -
How to add a new character set encoding?
Hello,
can anybody please explain to me, how to add a new character set encoding to Mac OS Tiger?
I have two Mac laptops, a new one with Snow Leopard and an older one with Tiger, and on the old one i cannot use or enable anywhere the "Russian (DOS)" character set encoding, which i need to be able to use some old text files.
On the Snow Leopard, this encoding is present in the list of available encodings of TextWrangler, but not in TIger.
If i have understood correctly, this is not a problem of TextWrangler, and the same encodings are available systemwide.
So, the question is: how to add new encodings to Tiger (or to Mac OS in general)?
Thanks.I think possibly that's in the Get Info window of Finder?
I don't think either that or the input menu have any effect on available encoding choices. Adding languages to system prefs/international/languages can do that, but once you have added Russian there, I don't know of any way to add an additional Russian encoding (there are quite a number of them). -
How to add a new column (Project Number) in the action items table under NPD Module?
There are two projects with same name and created by same person in NPD.
So when it is displayed in "Action Items" table, It looks similar.
To avoid this, I need one more column (Project Number) to be added in the "Action Items" table and " Strategic briefs and projects" table.
So, How to add a new column (Project Number) in the "Action Items" table and " Strategic briefs and projects" table under NPD Module?
Please do the needful.There is no out of the box configuration available to add columns to NPD action items. As always we welcome enhancement requests.
Thanks
Kelly -
How to add a new field in MM01, with say contaminent as a field?
How to add a new field in MM01, with say contaminent as a field? I process that i know is i has to go the user exit and check out the three user exits that are available for MM01 after that what i have to do please can any one help me out with the procedure to proceed?
Hai venkateshwar reddy ,
try with these user exits
MGA00001 Material Master (Industry): Checks and Enhancements
MGA00002 Material Master (Industry): Number Assignment
MGA00003 Material Master (Industry and Retail): Number Display
Refer these steps also
http://sap.ittoolbox.com/groups/technical-functional/sap-r3-dev/screen-exit-on-mm01-mm02-mm03-322717# -
How to add a new tab for the project?
Dear All Experts,
Could you tell me how to add a new tab for the project?
Pls refer to the screenshot as below:
Thanks!
Xinling ZhangHi,
The new tab in cj20n , and the new tab can only be displayed in the highed level.Pls refer to below
And in cj02, there is no this tab also in the wbs detailed screen,
Thanks!
Xinling -
Urgent - How to add a new control instead of tabs in JTabbedPane
Hi,
Please give me an idea or a sample program for how to add a new control
in JTabbedpane instead of tabs that means overlay any Java controls or pane
in the tabpane empty place next to tabs"Urgent" is not relevant to the question. Your question is no more important than anybody elses.
My answer in this posting show a limited solution:
http://forum.java.sun.com/thread.jspa?forumID=57&threadID=636289
Otherwise I suggest you try using a layered pane approach:
http://java.sun.com/docs/books/tutorial/uiswing/components/layeredpane.html -
How to add a new data element for existing table filed(Primary key field)
Hi Experts,
How to add a new data element for existing table field(Primary key field)
For this filed ther is no foreign key relation ships and even check table.
while activating table it is giving message like below.
can you help any one to solve this and wil steps to add new dataelement for existing primary key filed of a table.
Check table (NAMING SPACE/TABLE NAME(EX:/TC/VENDOR)) (username/19.02.10/03:29)
Primary key change not permitted for value table /TC/VENDOR
Check on table /TC/VENDOR resulted in errors
Thanks
RaviHi,
Easiest way is to download the table eg into an Excel table (if possible) or text table. Drop the table from the database. Build your table with the new key field. Build the database table again and fill it.
You can do it also over the database into a new table. Drop the old one. Build the enhanced one and fill it. Afterwards drop your (temporary) table.
Maybe there are other ways, but this works.
Success,
Rob -
How to add a new url link in a view of an existing webdynpro component?
How to add a new url link in a view of an existing webdynpro component?
hi ,
refer SAP online hep :
Implementing Enhancements in a View
http://help.sap.com/erp2005_ehp_04/helpdata/EN/46/233f2189f74f08e10000000a114a6b/frameset.htm
To enhance the layout of the view, you can create new UI elements. This procedure is no different u2013 from a technical viewpoint u2013 from creating UI elements in components themselves. All UI elements created within the enhancement implementation can then be processed as usual.
Enhancements means inserting user developments into SAP development objects at predefined positions.
The Enhancement Framework enables you to add functionality to standard SAP software without actually changing the original repository objects, and to organize these enhancements as effectively as possible.
refernce :
have a look at this article
How to Create Enhancement Implementation in Web Dynpro ABAP
http://www.sdn.sap.com/irj/scn/index?rid=/library/uuid/700317da-bd79-2c10-368e-8f18bf5d8b81&overridelayout=true
as pointed correctly by Saurav in earlier thread
regards,
amit -
How to add a new char in Update rule
Hi Gurus:
I copied update rules from an old cube. This new cube is a copy of old cube - almost.
One of the char is missing in the new cube when compared to old cube. There is a small update routine for that char which I need to introduce to new cube.
My problem is, I'm not able to figure out how to add the new char in the update rule & start the mapping process..
Thanks & RegardsDear Bhanu: This is what happened.
When I copied - it defaulted this char with what present in comm structure. Basically the old cube has a routine for this char...
And the position of this char in the update rule for chars..got realigned.
I'm sorry - I should have check it properly.
Thanks a LOT for your time & input...I will assign the points
Best Regards -
How to add a new line in SMS(Line Break).
Hi All,
I need to send SMS from PL\SQL Procedure
The problem i have been facing is that the string being passed in as sms content is not parsing a newline character.
It shows all content in one line.
I need to break them in several lines.
Give me a direction how to add a new line in SMS.
Regards,
Raj.Hi,
Sure, Here it is
CREATE OR REPLACE PROCEDURE APPS.AUTO_SMS_RTV_REPORT
IS
sender VARCHAR2(1000);
recipient VARCHAR2(1000);
message VARCHAR2(4000);
sub VARCHAR2(1000) := 'HELLO';
dt1 varchar2(1000) := to_char(sysdate,'DD-MON-YY');
mailhost VARCHAR2(30) := '10.7.7.xxx';
mail_conn UTL_SMTP.CONNECTION;
v_crlf VARCHAR2(2) := CHR(13)||CHR(10);
CURSOR cur_Rejection_Records IS
SELECT DISTINCT
rt.VENDOR_SITE_ID ,
pvs.email_address VENDOR_MAIL_ID ,
pvs.PHONE vendor_contact_no ,
hre.EMAIL_ADDRESS Employee_mail_id ,
hre.FULL_NAME
FROM apps.rcv_transactions rt,
apps.po_vendors pv,
apps.po_vendor_sites_all pvs,
apps.mtl_transaction_reasons mtr,
apps.fnd_user fu,
apps.hr_employees hre
WHERE transaction_type = 'RETURN TO VENDOR'
--AND TRUNC(rt.transaction_date) = TRUNC(SYSDATE)
AND rt.vendor_id = pv.vendor_id
AND rt.vendor_site_id = pvs.vendor_site_id
AND rt.REASON_ID = mtr.REASON_ID(+)
AND fu.user_id = rt.last_updated_by
AND hre.EMPLOYEE_ID = fu.EMPLOYEE_ID
AND TRANSACTION_ID IN (
11902189,
11902253,
11902148)
BEGIN
FOR rec_Rejection_Records IN cur_Rejection_Records
LOOP
Begin
sender := '<[email protected]>';
recipient := rec_Rejection_Records.vendor_contact_no || '@aaaa.com';
mail_conn := utl_smtp.open_connection(mailhost, 8025);
utl_smtp.helo(mail_conn, mailhost);
utl_smtp.mail(mail_conn, sender);
utl_smtp.rcpt(mail_conn, recipient);
utl_smtp.DATA( mail_conn,
'Date: ' || TO_CHAR(SYSDATE, 'Dy, DD Mon YYYY hh24:mi:ss') || utl_tcp.crlf ||
'From: ' || sender || utl_tcp.crlf ||
'Subject: '|| sub || utl_tcp.crlf ||
'To: ' || recipient || utl_tcp.crlf ||
utl_tcp.crlf ||
'Dear Supplier,'||CHR(10)|| utl_tcp.crlf ||'\\\0x0A'|| -- HERE I NEED LINE BREAK
'Please.'|| utl_tcp.crlf
DBMS_OUTPUT.PUT_LINE('Yep !!! SMS Sent Sucessfully :) ');
utl_smtp.quit(mail_conn);
EXCEPTION
WHEN UTL_SMTP.PERMANENT_ERROR THEN
dbms_output.put_line('Error - ' || SQLCODE || ' - ' || SQLERRM);
WHEN OTHERS THEN
dbms_output.put_line('Error - ' || SQLCODE || ' - ' || SQLERRM);
END;
END LOOP;
END AUTO_SMS_RTV_REPORT;
/
Maybe you are looking for
-
I can't restore my classic!! Says Error 1418
Also I haven't been able to get a full charge.
-
Where is the movie I just rented on my IPad? I can't find it.
I downloaded a movie from the ITunes app on my IPad. Now I cannot find the movie to view it on my Ipad. Where is it? I hope someone can help me out. This is pretty embarrassing. It was definitely downloaded as a rental, and the money has been rede
-
Script to copy current files from one folder to another and to FTP it to a another server
I have created a simple script that copies the file, but doesn't give me only the current day file. I'm not sure what I'm doing wrong. :: @echo off setlocal :: Checking for production cluster if not exist e: exit date /t for /f "tokens=1-4 delims=/
-
Hi all, just downloaded IOS 5 onto mt iphone 4. Its all fantastic apart from "icloud". Bring back mobile me, is there anyway I can stay with mobile me or should I give icloud a chance? regards P.K.
-
Tips on wrapping my brain around using compression and expansion
I have audio of an event where unfortunately some people were standing too far form the mic at points so their audio is low. What i am trying to do is wrap my brain around the Dynamics Processor to raise the low bits up to peak at -3db and then if an