How to add a New schedule line and update the order quantity?

Hi all,
I have to add a new schedule line in VA01/VA02 so that when ther is partial confirmed quantity against a schedule line, we have to create a new schdule line based on the existing so that it will contain confirmed in one and unconfirmed in the other.
The schedule line will split once the user go to Header data screen in VA01/VA02. So I used USEREXIT_MOVE_FIELD_TO_VBAK user exits in MV45AFZZ include program.
I splited the order quantity against the confirmed quantity and added it as new schedule line in the XVBEP internal table and update UPDKZ flags for XVBEP & YVBEP.
Could anyone tell me is there any other way to do this without updating XVBEP? Because it is affecting some other place because of index table is not updating. How to you think use if update xvbap-etenr_high and update index table IVBEP1 for new line insert into XVBEP instead directly inseritng it into?
My code as follows:
xvbep-WMENG = t_temp-WMENG .
modify xvbep TRANSPORTING WMENG.
t_temp1- ETENR = '0002'.
if SY-SUBRC <> 0.
t_temp1-UPDKZ = UPDKZ_NEW.
modify xvbep TRANSPORTING WMENG UPDKZ.
endif.
With Regards
Raj

Have you got thru this one if so please provide me with the solution as i got the same req' ..

Similar Messages

How to add a new schedule line?

Hi folks,
Please help to tell me is there any user exit can be used for adding a new schedule line? I want to keep the old first date data, add new shedule line with new updated schedule line date. Pls. help to advise how to do it in VA01/VA02 ?
If i simply use the following update statement in MV45AFZZ, then the first date will be updated by the new Schedule line date, which is not what i want. (Since new order always the First line "0001" will get updated)
xvbep-edatu = t_temp-edatu .
       modify xvbep TRANSPORTING edatu "UPDKZ
                     where posnr = t_temp-posnr
                       and ETENR = '0002'.
        if SY-SUBRC <> 0.
           modify xvbep TRANSPORTING edatu "UPDKZ
                        where posnr = t_temp-posnr.
        endif.
Tks,
Jenny
Message was edited by:
        Jenny Zhuang

Hi Ferry,
Many thanks for the reply. But i still have the question, seems the user exit 'USEREXIT_CHECK_VBEP' in 'MV45AFZB' is used for addtional checks on the schedule line, my questions is how to add a new schedule line? It maybe very difficult. so is it possible to change the configurable Sales order's Finish Date for it's production order, and force it to generate a new schedule line?
Tks,
Jenny

How to add a new column (Project Number) in the action items table under NPD Module?

There are two projects with same name and created by same person in NPD.
So when it is displayed in "Action Items" table, It looks similar.
To avoid this, I need one more column (Project Number) to be added in the "Action Items" table and " Strategic briefs and projects" table.
So, How to add a new column (Project Number) in the "Action Items" table and " Strategic briefs and projects" table under NPD Module?
Please do the needful.

There is no out of the box configuration available to add columns to NPD action items. As always we welcome enhancement requests.
Thanks
Kelly

How to add a new table or view in the view object

hello,every one.
I wanna add a new table or view in the view object's query statement.
when the table or view not in the where clause,the query statement is working fine.
If they in the where clause,I got the "java.lang.NullPointerException".
who can help me
thank you very much

thank you for your reply
I wanna extend the VO
oracle.apps.pay.selfservice.payslip.US.server.PayPayslipGetPersonDetail
the original sql is:
SELECT ppf.person_id,
FROM per_people_f ppf,
per_assignments_f paf,
pay_assignment_actions paa
where paa.assignment_action_id = :1 AND paf.assignment_id = paa.assignment_id AND SYSDATE BETWEEN paf.effective_start_date AND paf.effective_end_date AND paf.person_id = ppf.person_id
I wanna extend:
SELECT ppf.person_id, pay_v.element_name,pay_v.assignment_action_id
FROM per_people_f ppf,
per_assignments_f paf,
pay_assignment_actions paa,
pay_run_results_v pay_v
where paa.assignment_action_id = :1 AND paf.assignment_id = paa.assignment_id AND SYSDATE BETWEEN paf.effective_start_date AND paf.effective_end_date AND paf.person_id = ppf.person_id
pay_v.assignment_action_id =paa.assignment_action_id
if the pay.v in the where clause. I will got the exception. whereas,it's works fine.

How to add a new user property and then retrieve it from a portlet

Trying to add a user property and then retrieve it form a remote web service?
Add a user property and map it
1. Create a property2. Go to Global Object Property Map3. Go to users, edit and select the new property.4. Go to User Profile Manager5. For portlets, go to the "Position Information" section and add it. (for the purpose of this test, add it to the profile section as well)6. Under the "User Profile Manager" go to the "User Information - Property Map" step in the wizard and 7. Go to the "User Information Attribute" and add the property.8. Click on the pencil to the right of it and give it a name (The name is what's going to appear in the list of user information under the portlet web service)9. Click finish10. Now create/edit the web service for the portlet from which you want to displays user properties. 11. Under the "User Information", click "add existing user Info" and select the property you want.12. From the portal toolbar, edit the user profile under "My Account" and then "Edit user Profile" and give the new property a value. 13. Test code below: ================================in C# IPortletContext context = PortletContextFactory.CreatePortletContext(Request,Response);IPortletRequest portletRequest = context.GetRequest();System.Collections.IDictionary UserInfoVariables = portletRequest.GetSettingCollection(SettingType.UserInfo);System.Collections.IDictionaryEnumerator UserInfo = UserInfoVariables.GetEnumerator();
while(UserInfo.MoveNext()){ //to display in a listbox ListBox1.ClearSelection(); ListBox1.Items.Add(UserInfo.Key.ToString() + ": " + UserInfo.Value);}===========================in ASP: <%Dim objSettings, dUserInfo, sEmpIDSet objSettings = Server.CreateObject("GSServices.Settings") ' get the user info settings, get employee ID from user infoSet dUserInfo = objSettings.GetUserInfoSettings
for each item in dUserInfo response.Write "<BR>" & item & ": " & dUserInfo(item)next%>

IPortletContext portletContext = PortletContextFactory.createPortletContext(req, res);
IPortletRequest portletReq = portletContext.getRequest();
String value = portletReq.getSettingValue(SettingType.Portlet,settingName);

How to make a new iCoud account and take the old one off my iPad with the information getting deleted from my iPhone?

I have one iCloud account and that is on my iPhone. But when I got a iPad I ended up with the same iCloud account that was in my iPhone. I don't like that because if someone sends me a message it goes to my phone and the iPad. How do I make a new iCoud?

Settings > iCloud, scroll down and hit the delete account button. Any information on that account will be deleted from that device, but it will not be deleted from the cloud or any of the device logged into that account.

How to add fields in custom infotype and update its screens

Hi Experts
I want to enhance a custom infotype ( Add some new fields, and add special function on its screen). This custom infotype is created in previous release. is there any way to add fields in infotype? and let system automatcailly modify corresponding screens to add new fields

Go to Transaction PM01.
2) Enter the custom Infotype number which you want to create (Should be a 4 digit number, start with 9).
3) Select the u2018Employee Infotypeu2019 radio button.
4) Select the u2018PS Structure Infotypeu2019.
5) Click on Createu2026 A separate table maintenance window appearsu2026
6) Create a PS structure with all the fields you want on the Infotype
7) Save and Activate the PS structure
8) Go back to the initial screen of PM01.
9) Click on u2018Allu2019 push button. It takes a few moments.
10) Click on u2018Technical Characteristicsu2019. Infotype list screen appears
11) Click on u2018Changeu2019(pencil) button
12) Select your Infotype and click on u2018Detailu2019 (magnifying glass) button
13) Give u2018T591Au2019 as subtype table
14) Give u2018T591Su2019 as subtype txt tab
15) Give your subtype field as subtype field
16) Save and come back to PM01 initial screen
17) Click on u2018Infotype Characteristicsu2019 u2026 Infotype list screen appears
18) Click on u2018Changeu2019 (pencil) button
19) Click on u2018New Entriesu2019
20) Enter your Infotype number and short text
21) Here we have to set different Infotype Characteristics as per the requirement. (Better open another session with some standard Infotypeu2019s infotype characteristics screen and use as the reference to fill yours)
22) Save your entries.
23) Now the Infotype is created and ready to use.
24) If you want to change the layout of the Infotype as per your requirementu2026
25) In the PM01 initial screenu2026Select u2018Screenu2019 radio button and give 2000 as the screen name, then click on edit.
26) In the next screen.. Select u2018Layout Editoru2019 and click u2018Changeu2019.
27) Screen default layout appearsu2026here you can design/modify the screen..change the attributes of the fields..etc.
28) Save and activate. (Donu2019t forget to u2018Activate at every level
i think u have to select CI_INCLUDE while enhanceing the Standrad Infotype

How do you monitor a background thread and update the GUI

Hello,
I have a thread which makes its output available on PipedInputStreams. I should like to have other threads monitor the input streams and update a JTextArea embedded in a JScrollPane using the append() method.
According to the Swing tutorial, the JTextArea must be updated on the Event Dispatch Thread. When I use SwingUtilities.invokeLater () to run my monitor threads, the component is not redrawn until the thread exits, so you don't see the progression. If I add a paint () method, the output is choppy and the scrollbar doesn't appear until the thread exits.
Ironically, if I create and start new threads instead of using invokeLater(), I get the desired result.
What is the correct architecture to accomplish my goal without violating Swing rules?
Thanks,
Brad
Code follows:
import java.lang.*;
import java.io.*;
import javax.swing.*;
import javax.swing.text.*;
import java.awt.*;
import java.awt.event.*;
public class SystemCommand implements Runnable
     private String[] command;
     private PipedOutputStream pipeout;
     private PipedOutputStream pipeerr;
     public SystemCommand ( String[] cmd )
          command = cmd;
          pipeout = null;
          pipeerr = null;
     public void run ()
          exec ();
     public void exec ()
          // --- Local class to redirect the process input stream to a piped output stream
          class OutputMonitor implements Runnable
               InputStream is;
               PipedOutputStream pout;
               public OutputMonitor ( InputStream i, PipedOutputStream p )
                    is = i;
                    pout = p;
               public void run ()
                    try
                         int inputChar;
                         for ( ;; )
                              inputChar = is.read();
                              if ( inputChar == -1 ) { break; }
                              if ( pout == null )
                                   System.out.write ( inputChar );
                              else
                                   pout.write ( inputChar );
                         if ( pout != null )
                              pout.flush ();
                              pout.close ();
                         else
                              System.out.flush();
                    catch ( Exception e ) { e.printStackTrace (); }
          try
               Runtime r = Runtime.getRuntime ();
               Process p = r.exec ( command );
               OutputMonitor out = new OutputMonitor ( p.getInputStream (), pipeout );
               OutputMonitor err = new OutputMonitor ( p.getErrorStream (), pipeerr );
               Thread t1 = new Thread ( out );
               Thread t2 = new Thread ( err );
               t1.start ();
               t2.start ();
               //p.waitFor ();
          catch ( Exception e ) { e.printStackTrace (); }
     public PipedInputStream getInputStream () throws IOException
          pipeout = new PipedOutputStream ();
          return new PipedInputStream ( pipeout );
     public PipedInputStream getErrorStream () throws IOException
          pipeerr = new PipedOutputStream ();
          return new PipedInputStream ( pipeerr );
     public void execInThread ()
          Thread t = new Thread ( this );
          t.start ();
     public static JPanel getContentPane ( JTextArea ta )
          JPanel p = new JPanel ( new BorderLayout () );
          JPanel bottom = new JPanel ( new FlowLayout () );
          JButton button = new JButton ( "Exit" );
          button.addActionListener ( new ActionListener ( )
                                   public void actionPerformed ( ActionEvent e )
                                        System.exit ( 0 );
          bottom.add ( button );
          p.add ( new JScrollPane ( ta ), BorderLayout.CENTER );
          p.add ( bottom, BorderLayout.SOUTH );
          p.setPreferredSize ( new Dimension ( 640,480 ) );
          return p;
     public static void main ( String[] argv )
          // --- Local class to run on the event dispatch thread to update the Swing GUI
          class GuiUpdate implements Runnable
               private PipedInputStream pin;
               private PipedInputStream perr;
               private JTextArea outputArea;
               GuiUpdate ( JTextArea textArea, PipedInputStream in )
                    pin = in;
                    outputArea = textArea;
               public void run ()
                    try
                         // --- Reads whole file before displaying...takes too long
                         //outputArea.read ( new InputStreamReader ( pin ), null );
                         BufferedReader r = new BufferedReader ( new InputStreamReader ( pin ) );
                         String line;
                         for ( ;; )
                              line = r.readLine ();
                              if ( line == null ) { break; }
                              outputArea.append ( line + "\n" );
                              // outputArea.paint ( outputArea.getGraphics());
                    catch ( Exception e ) { e.printStackTrace (); }
          // --- Create and realize the GUI
          JFrame f = new JFrame ( "Output Capture" );
          f.setDefaultCloseOperation ( JFrame.EXIT_ON_CLOSE );
          JTextArea textOutput = new JTextArea ();
          f.getContentPane().add ( getContentPane ( textOutput ) );
          f.pack();
          f.show ();
          // --- Start the command and capture the output in the scrollable text area
          try
               // --- Create the command and setup the pipes
               SystemCommand s = new SystemCommand ( argv );
               PipedInputStream stdout_pipe = s.getInputStream ();
               PipedInputStream stderr_pipe = s.getErrorStream ();
               // --- Launch
               s.execInThread ( );
               //s.exec ();
               // --- Watch the results
               SwingUtilities.invokeLater ( new GuiUpdate ( textOutput, stdout_pipe ) );
               SwingUtilities.invokeLater ( new GuiUpdate ( textOutput, stderr_pipe ) );
               //Thread t1 = new Thread ( new GuiUpdate ( textOutput, stdout_pipe ) );
               //Thread t2 = new Thread ( new GuiUpdate ( textOutput, stderr_pipe ) );
               //t1.start ();
               //t2.start ();
          catch ( Exception e ) { e.printStackTrace (); }


Thanks for pointing out the SwingWorker class. I didn't use it directly, but the documentation gave me some ideas that helped.
Instead of using invokeLater on the long-running pipe-reader object, I run it on a normal thread and let it consume the output from the background thread that is running the system command. Inside the reader thread I create a tiny Runnable object for each line that is read from the pipe, and queue that object with invokeLater (), then yield() the reader thread.
Seems like a lot of runnable objects, but it works ok.

In making a monthly budget how do you repeat for next month and update the dates to the next month?

i want to make my budget speadsheet update the month and date as it goes to the next month automatically, from sheet to sheet. is there any way to make this happen?

You could have a cell where you enter the month and year...
Or you could pull the month and year from the first entry in the date column. Like Barry I would want more information regarding your set up before proposing any other, more specific, ideas.

How to add a new user so it have the same access with restricted usertime

When i made a new useraccount to my daughter,with restricted usertime,she have probl.to get into the interned.
How can i make it possible to have the same look on her useraccount as mine as admin.but only with restricted usertime?
Brgds
O.Knutsen

Hi,
This should be very much possible.
Please see:
https://glassfish.dev.java.net/nonav/javaee5/amx/javadoc/index.html
Once you've got the domain-root, you should traverse and get a named "config",
using getConfigConfigMap("server-config") method and then get the
SecurityConfig out of that. Once you get the Security Config, you should get
the default realm using getDefaultRealm method and then it should be
possible for you to use addUser.
Please let me know if it helps.
Kedar

HT4710 To update this application, sign in to the account you used to purchase it. It was pre-installed, how do I get past this message and update the software?

To update this application, sign in to the account you used to purchase it. The app was pre-installed, how do I get past this message?

The the account you used to "purchase" iPhoto is the Apple ID you used to set yoru couputer up with - log into th eApp store using that Apple ID and look under purchases - if you have not accepted the App yet then you will have to accept it first
LN

Adding Schedule lines to a sales order

Friends,
We have a requirement to clear the old un-delivered scheduled lines from a sales order and then add new schedule lines from a EXCEL file. We were able to clear the old by putting in a new location. Then, when we go to enter the new schedule lines, it clears the location, marks the Fixed date and Qty, and enters the delivery dates and confirmed quantities. We tried using BAPI_SALESORDER_CHANGE, but the schedule_lines table only has the required quantity so when used it increases the order quantity, which is not good. Is there any Function module that we can call to insert new schedule lines without increasing the order quantity other than using a BDC? Thanks!

Pasted below is the BAPI documentation for this parameter.
"Check Table for Schedule Lines
Description
This parameter completes the following two tasks:
Controls processing functions with the value in the UPDATEFLAG field (change indicator).
The following entries are available:
' ':   Create new schedule lines
I:     Create new schedule lines
U:     Change existing schedule lines
D:     Delete existing schedule lines
Controls the field entry with check fields
If the UPDATEFLAG field has been activated, the system only copies those fields to the data parameter that have been filled with 'X'."
Nabheet

Adding a new schedule line for a line item using bapi_po_change

hi experts,
can i know how to add a new schedule line for a line item using<u> bapi_po_change</u>. what are the parameters that need to be filed. i filled poitem with total quantities and poschedule table with 2 different schedule lines and passing as the parameter.but then i get the error saying item 0000 doesnt exist

Hi,
Please check if you have properly populated the following fields in POSCHEDULE:
PO_ITEM
SCHED_LINE
and the other fields required for your schedule line such as delivery date and quantity, etc.
After that, make sure to properly populate fields in POSCHEDULEX:
PO_ITEM -> same value as found in POSCHEDULE
SCHED_LINE -> same value as found in POSCHEDULE
All other values populated in POSCHEDULE should be ticked as 'X' in POSCHEDULEX.
Kind Regards,
Darwin
Kind Regards,
Darwin

I bought an old iPod touch It is 6.1.6, i would like to add a new icloud account but it can't let me. this iPod touch belonged to another person and i don't know where is he can you tell me please how to add a new icloud account??

I bought an old iPod touch It is 6.1.6, i would like to add a new icloud account but it can't let me. this iPod touch belonged to another person and i don't know where is he can you tell me please how to add a new icloud account??

The 4G/iOS 6 does not have an Activation Lock. That started with iOS 7.
Place the iOS device in Recovery Mode and then connect to your computer and restore via iTunes. The iPod will be erased.
If recovery mode does not work try DFU mode.
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
For how to restore:
iTunes: Restoring iOS software

Schedule Lines and BI

Hi,
Can anyone please make me understand how does schedule lines works in BI.
Regards

Hi,
Schedule Line Item Data provides information about the header data of a purchasing document, such as vendor, purchasing organization, order currency, the item data such as material, purchase order quantity, order unit, net price, and the purchasing document delivery schedule lines, such as schedule line number, delivery date, schedule line quantity, value of schedule line quantity.
Item Line denotes the products or materials description for a Sales Order or Invoice such as Qty, Price and other details will be stored in the ITM.
Schedule line contains the above product or materials delivery details. Lets say the customer has asked for 1000 X product and he may ask or the company send that 1000 in 3 or 4 schedules and these information will be stored in the SCL.Not all the deliveries needs SCL.it is the division of an item in a sales document according to date and quantity.
For example, if the total quantity of an item can only be delivered in four partial deliveries, the system creates four schedule lines and determines the appropriate quantities and delivery dates for each schedule line.
also pls chk this;
http://help.sap.com/saphelp_nw04/helpdata/en/42/06f3381fff3358e10000000a11402f/content.htm
Regards
CSM Reddy

How to add a New schedule line and update the order quantity?

Similar Messages

Maybe you are looking for