How to add a row in Numbers

Hi,
how can I add a row above a certain row in Numbers? I'm trying to insert a row right at the top of my table.
Thanks
p.

Tap on the table to expose the selector controls. Tap on the row at the far left (on the control bar to left of the first cell. You should se a menu pop up. tap Insert. If this is done at the first row, you should have the option of selecting a body or header row.
you also might find this helpful: http://help.apple.com/numbers/ipad/2.0/

Similar Messages

How do I add multiple rows in Numbers for iPad?

how do I add multiple rows in Numbers for iPad?

Hi James,
On the iPod I can only insert what is on the clipboard but I can insert however many rows I have there. Is it working differently for you? Benjoon seemed to think that he could not do this in Numbers. He was ruling Numbers out because of it. He doesn't need to do that because of this issue.
If I was needing to insert multiple blank rows often I might keep a table of blank rows or just some blank rows at the end of the working table that I could copy/paste. This is no different than Numbers on the Mac.
quinn

How to add two different page numbers in a single page

How to add two different page numbers in a single page? One is for page number of the whole article, the other one is for page number for each chapter in the article.

It's quite complicated, see
Two Page Numbering Schemes in the Same Document.
Regards, Hans Vogelaar (http://www.eileenslounge.com)

How to add new row and update existing rows at a time form the upload file

hi
How to add new row and update existing rows at a time form the upload file
example:ztable(existing table)
bcent                      smh            nsmh         valid date
0001112465      7.4                       26.06.2007
0001112466      7.5                       26.06.2007
000111801                      7.6                       26.06.2007
1982                      7.8                       26.06.2007
Flat file structure
bcent                       nsmh         valid date
0001112465     7.8     26.06.2007 ( update into above table in nsmh)
0001112466     7.9     26.06.2007 ( update into above table in nsmh)
000111801                     7.6      26.06.2007 ( update into above table in nsmh
1985                      11              26.06.2007   new row it should insert in table
thanks,
Sivagopal R

Hi,
First upload the file into an internal table. If you are using a file that is on application server. Use open dataset and close dataset.
Then :
Loop at it.
*insert or modify as per your requirement.
Endloop.
Regards,
Srilatha.

How do I delete rows in Numbers for iPad?

I am new to numbers for iPad. How do I delete rows in Numbers for iPad? I am able to delete the data in the rows/cells but I can't delete/move up the rows so I can move data in it's place.

I havn't got Numbers so I can't check it, but is what is on this page any help http://help.apple.com/numbers/ipad/1.4/#tan72717a35 ?

How to add empty rows in table in smart form

how to add empty rows in table in smart form?
plz help me regarding this
send me ur queries to [email protected]

You will need to add some extra rows to the internal table that your table is displaying. Use a program node to append additional rows with a key but no argument.
Alternaively a template may me more suitable for your requirement than a table.
Finally, please do not include you e-mail address in your question. Your question and the answers provided to it are for the benefit of everyone in the Community.
Regards,
Nick

How to add new row in KL02 trx - Activity type control data

Hi guys.
I am not a FI-CO consultant, but I want to add a row since KL02 transaction within a cost center, with a new fiscal year. When you access KL02 (change activity type), you set the activity type, then press Master Data and the basic screen appears. If you press the Display planning control button, you will see the "Display Activity Type Control Data" List. I wanna add a row for a specific cost center here, because the cost center I refer has not 2011 as fiscal year. I tried to use, since basic screen of KL02, use the Change planning control button, but when I set my cost center and 2011 as fiscal year, the Save button is inactive. Furthermore, I tried to press the Period screen and a message appeared "No data has been entered yet". So I dont know how to add one row for a cost center in the Planning control (Activity type control data) list of the KL02 transaction, specifically for an activity type. Do you know? Thanks in advance

Hi,
The list of cost centers in which the activity type is planned is given in KL02 under planning data. In order to add a new cost center to this, you need to enter the activity type in transaction KP26 for a particular year.
Goto transaction KP26
Give version - 0
from period 1 to 12
year - 2011
cost center - mention the cost center
Activity type - mention activity type
goto overview screen F5 and add the plan price for the activity in the cost center. This step will automatically add new row in the activity type control data.
Hope this helps.
Thanks,
Ram

HT1752 I am working on a chart in paged with 7 columns. Problem has occurred with amount of row. I have completed 999 rows and it won't allow me to continue. As I need to do approx 3000+ rows, can anyone explain to me how to add extra rows. Thanks Jane

I am working on a chart in pages with 7 columns.
Problem has occurred with amount of rows. I have completed 999 rows and it won't allow me to continue. As I need to do approx 3000+ rows, can anyone explain to me how to add extra rows. Thanks Jane

Try posting in the Pages forum
https://discussions.apple.com/community/iwork/pages

How to add 2 rows in the form layout?

In the detail page,form layout only one row pick up from database and it displays please anyone have idea about how to display 2 rows or 3 rows in a page?
how to add 2 rows in the form layout?
It's very urgent
Thanks in advance

No. You can only achieve this with smart custom templates. Here is sample code which will display multiple employees in form layout:
<af:forEach items="#{bindings.EmployeesTable.rangeSet}" var="row">
<af:panelForm rows="1" maxColumns="2" width="10%" id="RegionsFormItems">
<af:inputText id="EmployeesEmployeeId" value="#{row.LastName}" label="EmployeeId" .... />
<af:selectInputDate id="EmployeesHireDate" value="#{row.HireDate}" label="HireDate" ...... >
<af:convertDateTime pattern="#{nls.datepattern}"/>
</af:selectInputDate>
</af:panelForm>
</af:forEach>
Steven Davelaar,
JHeadstart Team.

How ro Add or remove page numbers?

How ro Add or remove page numbers in Numbers?

Hi Michael,
In Numbers 3.2, Menu > File > Print... to go to Print Preview.
Hover the cursor over the page display until the page footer appears. Select the page number.
and press delete. Gone!
Regards,
Ian.

How to Add a Row by clicking in other different Region

Hello Im trying to build a page that allows me to add items to a region by clicking in a report region in the same page.
I created a Report Region with my information , It has a link and one image in the region 1.
in other region(REgion 2) I have a tabular form from one table,
the idea is , how to Add rows to the tabular form(REgion 2) clicking items from the reports region (Region 1)the item could be the image or the link.
I tried with Addrow javaScrip, on my image as a link or even my link, and it worked ,but it works just adding an empty row and i need to add a row with information of the report region (Region 2) for example ID_product.
so this is other question how to use Addrow javascrip , including data in the row automaticly .
Well this is what i have been trying ,I don't know if this is the correct way to do it , or if the best way.
Maybe there is another method , like ajax or something
Please any advice will be appreciated.

Hello Im trying to build a page that allows me to add items to a region by clicking in a report region in the same page.
I created a Report Region with my information , It has a link and one image in the region 1.
in other region(REgion 2) I have a tabular form from one table,
the idea is , how to Add rows to the tabular form(REgion 2) clicking items from the reports region (Region 1)the item could be the image or the link.
I tried with Addrow javaScrip, on my image as a link or even my link, and it worked ,but it works just adding an empty row and i need to add a row with information of the report region (Region 2) for example ID_product.
so this is other question how to use Addrow javascrip , including data in the row automaticly .
Well this is what i have been trying ,I don't know if this is the correct way to do it , or if the best way.
Maybe there is another method , like ajax or something
Please any advice will be appreciated.

How to add new row at the top of the advance table.

Hi,
I have one advanced table.
I want to add new rows in advanced table. I can able to add rows using the AddMoreRows button in the footer of the advanced table.
This adds the row at the end. But I want to add the row at the top.
How to achive this? Please suggest.
Thanks & Regards,
Raja

Hi,
Yes you can do it...
Just set the add Rows automatically property to False of Add Row Button
and then in processForm Request capture the addRows event
and invoke a method in AM and then create a new Row in VO.
Use this code...it will insert row at the top...
if("addRows".equals(event))
am.invokeMethod("addrows");
public void addrows()
AddressesVOImpl vo1 = getAddressesVO1();
AddressesVORowImpl row1 = (AddressesVORowImpl)vo1.createRow();
vo1.insertRowAtRangeIndex(0,row1);
vo1.setCurrentRow(row1);
Thanks,
Gaurav

How to add new row to adf table progrmatically

Hi,
I have a bean with a list and correspoding getter & setter methods inside it.
I created a datacontrol out of the bean and I am displaying af:table in the ui
binded to this list.
Ex:
public class StudentBean {
private List<Student> students;
// getter & setter methods.
jsp
<af:table value="#{bindings.students.collectionModel}" var="row"
rows="#{bindings.students.rangeSize}"
emptyText="#{bindings.students.viewable ? 'No data to display.' : 'Access Denied.'}"
fetchSize="#{bindings.students.rangeSize}"
rowBandingInterval="0"/>
How to add a new row programitically to this adf table.
I dragged and dropped 'Create' from operations menu on to jsp.
But on click of that.no new row is being added to the current table.
On click of a button in u.i I want to add a new row to the table.
Thanks,
Praveen

Hi,
The source code is as below.
<af:table value="#{bindings.students.collectionModel}" var="row"
rows="#{bindings.students.rangeSize}"
emptyText="#{bindings.students.viewable ? 'No data to display.' : 'Access Denied.'}"
fetchSize="#{bindings.students.rangeSize}"
rowBandingInterval="0"
filterModel="#{bindings.rscGroupsQuery.queryDescriptor}"
queryListener="#{bindings.rscGroupsQuery.processQuery}"
filterVisible="true" varStatus="vs"
selectedRowKeys="#{bindings.rscGroups.collectionModel.selectedRow}"
selectionListener="#{bindings.rscGroups.collectionModel.makeCurrent}"
rowSelection="single" id="t1"/>
<af:commandButton actionListener="#{bindings.Create.execute}"
text="Create" disabled="#{!bindings.Create.enabled}"
id="cb1" partialTriggers="t1"/>
Please let me know where am I doing wrong?
On click of this button,it is not adding a row dynamically.
Thanks,
Praveen

How to add a row-selector to an existing SQL Query (updatable report)

Hi,
I screwed up an extensive updatable report in Apex 4.2 region by one time indicating the page may be parsed at run time.
After setting this back (to validate query) a lot of the columns setting were gone, and also the row-selector
I actually don't kno how to simply add this row-selector back into place.
Anyone who can point me in the right direction?
Thanks a lot
Wim

Wim,
>
Hi,
I screwed up an extensive updatable report in Apex 4.2 region by one time indicating the page may be parsed at run time.
After setting this back (to validate query) a lot of the columns setting were gone, and also the row-selector
I actually don't kno how to simply add this row-selector back into place.
Anyone who can point me in the right direction?Have you been able to recover all your other configuration and this is the last thing you need to fix? Or are all those other things needing to be fixed as well?
The reason I ask is that you may want to consider just starting from scratch, if you haven't put lots of effort into recovering everything else just yet.
On the other hand, if you just want to add a checkbox back into the SQL statement then you can add this, substituting your column name for empno of course:
APEX_ITEM.CHECKBOX2(1,empno,'CHECKED') "Select"When you do this you'll get a warning that you're changing the interactive report, which you should accept. Then you need to make sure that the column is actually shown in the interactive report by making sure it's in the displayed columns list. And you may also need to change the display type of the column to "Standard Report Column"
Hope that helps.
Earl

How to add blank rows between groups of duplicate rows?

here is my setup
create table #tmpA(rowID int identity(1,1), fName varchar(10), lName varchar(10))
insert into #tmpA
select 'a', 'b' union all
select 'a', 'b' union all
select 'c', 'd' union all
select 'c', 'd' union all
select 'e', 'f' union all
select 'e', 'f' union all
select 'g', 'h' union all
select 'g', 'h'
select distinct fName, lName
into #tmpB
From #tmpA
select t1.* from #tmpA t1 Join #tmpB t2 on t1.fName = t2.fName and t1.lName = t2.lName
--output
rowID fName lName
1             a        b
2             a        b
3            c         d
4             c         d
5             e        f
6            e        f
7             g        h
8             g        h
I want to add blank rows between rows 2 & 3 and between rows 4 & 5 and between rows 6 & 7 in the join query above. Is there Tsql that can accomplish something like this to make the join query result look like the following output?
rowID fName lName
1           a         b
2           a          b
3            c          d
4            c         d
5           e         f
6            e         f
7           g          h
8            g         h
or if this is not possible I could go with an output like this:
rowID fName lName
1             a         b
2             a         b
3
4             c         d
5             c         d
6
7             e         f
8             e        f
9
10           g         h
11           g         h
Rich P

I came up with the following on my own. I was just hoping there might be a fancier way to do this - like without looping -- and yes, I could/should do this in a presentation layer, but I just wanted to do this in Query Analyzer (or whatever they call
it now -- SSMS ...) -- BTW, thanks CELKO for the suggestion about how to insert multiple rows using Values -- works great.
If (object_id('tempdb..#tmpA') is not null) drop table #tmpA
If (object_id('tempdb..#tmpC') is not null) drop table #tmpC
create table #tmpA(rowID int identity(1,1), fName varchar(10), lName varchar(10))
insert into #tmpA
values
('a','b'),
('a','b'),
('c','d'),
('c','d'),
('e','f'),
('e','f'),
('g','h'),
('g','h')
create table #tmpC(rrowID int Identity(1,1), rowID int, fName varchar(10), lName varchar(10))
declare @i int, @s varchar(10), @t varchar(10), @u varchar(10), @v varchar(10)
select @i = min(rowID) from #tmpA
set @u = 'xx'
While (@u != 'yy')
Begin
   select @s = fName, @t = lName from #tmpA Where rowID = @i
   if exists(select 1 from #tmpA Where rowID = @i + 1)
      select @u = fname, @v = lName From #tmpA Where rowID = @i + 1
   else
      set @u = 'yy'
    if @s = @u And @t = @v
       begin
         Insert Into #tmpC(rowID, fName, lName) Select * from #tmpA Where rowID = @i
         Insert Into #tmpC(rowID, fName, lName) Select * from #tmpA Where rowID = @i + 1
       end
    else
       begin
          Insert Into #tmpC(rowID, fName, lName) Select null, '', ''
       end
    set @i = @i + 1
End
select * from #tmpC
--output from #tmpC
rrowID rowID fName lName
1           1         a       b
2            2         a     b
3        NULL
4            3         c        d
5            4        c        d
6          NULL
7             5        e      f
8            6         e        f
9           NULL
10          7          g       h
11          8          g        h
12         NULL
Rich P

How to add a row in Numbers

Similar Messages

Maybe you are looking for