How to add an importance factor to a query

Is there any way to add an importance factor to a query?
For example:
SELECT table.field1,table.field2
FROM table
WHERE field1 = value1
OR field2 = value2
OR field3 = value3
The first statement has an importance of 60%, the second 25% and the last one 15%.
Thanks very much in advance for your time and effort,
Joey

Dan,
Not sure I understand. Are you suggesting that I establish an
alias column in my union query and then cfloop over it, using a SQL
update query to update the Union results to #currentrow#?
I thought I could only update tables, not queries.
You must mean that I can place a loop in my SQL statement,
but I have no clue how to do this.
If you could get me started it would be much appreciated.
BTW, thanks for being such great presence on these forums.
I’m sure you’re keeping ColdFusion alive for a lot of
folks.

Similar Messages

How to add newly imported audio - as a new storyline/angle to existing multi cam Project??

I have a 6 camera multi cam Music Video Project I have been working on in depth for 5 days. The "band" has sent me a new & improved .wav file to replace the audio I have been working with on one "song". I have imported it into the event, cannot figure out how to add it as a new angle (that I will manually sync on the timeline) and then make it the active audio monitor angle. I see ways to "connect it" but not how to have it appear in the 6up display & on its own story/time line in the precision editor. This is like reinventing the wheel. I am losing mu mind. Please help?
Thanks

Man oh man. I need to take a break & eat somthing, how embarassing. I swear I knew that but had an attack of hysterical blindness or... the disclose arrow>add new... Thank You Tom for your quick & thouriough reply. Have a swell holiday.

How to add already imported photos from a specific folder (on a hard drive) into a LR collection?

Sorry if this is obvious, but I can't for the life of me figure it out…
I'm using Lightroom to organize images for a book project, importing each folder of images one at a time and placing them in collections to match the client's file structure. E.g.
* Book project
** Landscapes
** MISC
** Still life
** Travel
So far I have been importing each folder, then dragging all the images from the "Previous import" option into a new LR collection. Unfortunately, I imported a folder (MISC) and then imported another (Still life) without copying the MISC images into a new collection. Now I can't figure out how to get the images from MISC into their own LR collection. I can't re-import them because they're already in the LR library. I don't think I can remove and re-import them either…
Is there any way to do this without me going through my library and finding each individual image and moving it manually?? There are a lot of images so I fear that would take days!
Thanks!

I'm curious why you need to create collections that seem to have identical contents to a folder that you imported (or did I misunderstand you completely?)
There's no need to create a collection that has the identical contents to a folder, just use the folder! Creating a collection in this case is extra work that produces no benefit.
And in case I did misunderstand you
Is there any way to do this without me going through my library and finding each individual image and moving it manually?? There are a lot of images so I fear that would take days!
Go to the MISC folder in the Lightroom Folder Panel, select this folder, then select all photos (Ctrl/Cmd-A) and then drag them to the collection

How to add Column field in the custom Query Link search page as a header

Hi,
I have created a Query page link in web layout editor. Now, I want to customise the view of the result. I see an option to change the "Text1" and "text2", but how do I add other fields as a colum in the search result ?
The only column I see by default Id, Title, release date and author. I want to see some of the custom metadata in the search result. I don't wan't to apply user specific custom search page.
Overall, I want a common search view across all the user such that each user doesn't have to create a custom search view.
Please help.
Thanks

hi
By adding context node, you will not be able to fetch value. To fetch value in BTSubject, you need to have following nodes in your context node.
Node Relation Higher level node
BTAdminH
BTBOSSet BTHeaderBOSSet BTAdminH
BTSubjectSet BTSubjectSet_A BTBOSSet
BTSubject BTSubjectAll BTSubjectSet_A
Right now you dont have BTBOSSet and BTSubjectSet in your view. That is why component is unable to pull data in BTSubject.
My suggestion would be to create cuco with above nodes
Bind BTAdminH with BTAdminH of Component controller
and bind BTSubject of details view with BTSubject of your Cuco.
If you want code code gp catalog as it comes in complaint then there is seperate procedure for that.
Best regards
Pankaj Kumar

How to add Variable in variant attributes in query

Dear all,
User required to add one variable (e.g. Last Week date) in variant attribute.
For example: If we select D: Dynamic date calculation then in that case i want to add one variant attribut (Last Week).
How i can maintained this.
Thanks in advance.
PM

Dear All,
I want to Add Variable name to Dynamic Date Calculation List as Last Week.
How i can create variable for Last week.
Thanks in advance.
PM

Urgent:how to add two table regions to one query region

hello
In my page a serach region is there and for that region i need to add two tables and two are based on two different view objects.how can i implemnet this thing please let me know.
advance thanks

Hi Wei Fang,
You can try by creating a 2 line template (1 Template, 2 linetype) under a loop note.
So your smartform tree structure will be shown like this:
LOOP
TEMPLATE1.
On the LOOP part, pass the internal table of your data to the working areas.
On the template put all the data of the summary on your first linetype, and put
the detail data on your second linetype.
Good luck and hopefully this will solve the problem
Edited by: Prawira Fadjar on Oct 22, 2008 10:04 AM

How to add & fill custom fields in POWL Query

Hi all,
I have a requirement where I need to create a new POWL Query and should show the Defect data of each Issue ID. I looked for tutorials and threads about POWL queries but can't seem to find the information I needed.
In details, I need a new query which should be available in NWBC -> Quality Issue Management -> Worklists. We already have one which is an overview of all Issues, but I need to create a new worklist which displays the Defect data of each Issue. (Please note, I am new to QIM and this is my first time handling QIM requirement.)
May I ask if you can guide me or if you know some links where there are steps how can I extract the Defect data? I also looked at OSS Note 1865206, is the steps for "Additional result fields" all I need?
Thanks,
Leo

Hi James,
The above was cancelled, but now I need to look why the query is not automatically refreshing the data when I changed the worklist parameters. It doesn't also refreshes the data when I click "Refresh list" button below the table in NWBC QIM worklist view:
But when I close the tab and reopen it, it now displays the updated list.
I tried the refresh configs I found here, but still doesn't work.
Thanks,
Eo

How to add Document and Comment in BI Query

Hi All,
I need one help from you, I am trying to upload some douement and comment in my BI query, after executing Query If i right click and Document --> Upload --> Comment/Document, I am getting following msg
1. Cannot get properties for assignment
2. Cannot get folder for assignment
3. Error while lunching new document dilog
looking for your help
Samit

Hi,
selection screen parameters and select options is possible. I think radio buttons is also possible.
Please check in AT-SELECTION SCREEN even available in the info set from SQ02.
Regards,
Santhosh.

How to Add a Variable created in New Query Designer

Friends
i am able to create variable on a char and i am unable to attach it to it.
Any specific options that i need to set it so that i get the selection screen.
Regards
Vijay

Hello Vijay,
From where are are trying to use the variable and what type of variable you created?
For characteristic variables,
In BW 3.x front-end, you can right click on the characteristic name and select "restrict". This will pop-up a window. Choose variables tab and select the variable from there.
In NW 2004s front-end, you can do this only from Filter tab page in query designer
not from Rows/columns and free characteristics.
You can do the same procedure in "Global Filter" or "Default values" area and attach the variable.
Regards,
Sheik Bilal

How to add infoObject at query level

Dear Friends,
How to add or import Info Object or Charecterstics directly at query level. Please note that this perticular Info Object is not available in Info Cube.
Please help me. It is very urgent.
Regards

Thanks Mr.Ramana
I have added InfoObject accordingly in MultiProvider, but in query result no results are coming for this perticular infoobject. It is coming as "Not assigned".
Is there any other solution like "customer exit"
Please reply.
Regards
Guru

Query: How to add new fields in ABAP query?

Hi All,
Can any one tell me how to add new fields in the ABAP query output?
We have to add the new fields using query design or we have
to add those in the background program(automatically generated behind query) by selecting new fields in the code?

What kind of report? Usually, you have to add the field in the table declaration and then also in the SQL query. After that, include the field in what kind of report you are using.

How to add new fields in SAP-Query

Hi,
Can any body tell how to add new fields to the existing query.
Thanks a lot,
Bhaskar.

hi,
when we create internal tables like. in final table you can include the extra fields.
data : begin of itab_mara,
         matnr like mara-matnr,
         erdat like mara-erdat,
         end of itab_mara.
data : begin of itab_marc,
         matnr like marc-matnr,
         werks like marc-werks,
         end of itab_marc.
data : begin of itab_final,
         matnr like mara-matnr,
         erdat like mara-erdat,
         werks like marc-werks,
         date like sy-datum,
         status(10) type c, * new fields
         end of itab_final.
<select statement>.
Append all the fields to itab.
loop at itab_final.
write :/ itab_final.
endloop.
Reward with points if helpful.
Message was edited by:
        Vinutha YV

How to add more fields at level task for importing to MsProject

Hi everyone,
We would like to have the same number of fields either for importing as exporting; or at least, the fields that we need.
The problem is when we are configurating the fields for exporting from cProjects to MsProject, we found 81 available fields and then we don't find the same amount for importing (34). So, in some cases we don't find fields which were configurated for exporting and it is no posible to upload the information back because the field is no available for importing.
Does anyone knows how to add more fields for importing at the cProjects side?
Thanks a lot,
CAMILO URIBE

Some fields can not be migrated because of MsProject designe. The above is the reason why cProjects' customizing does not offer the
mapping of the same nuember of fields.

How to add a gradient or 50% transparent fill to an .ai imported path?

Hello All;
I need some help. My task sounds simple enough but not sure how to accomplish it.
I created the following path in Illustrator (See attached illustration - the top one). This is actually for a lower-third graphic.
I have been successful at importating that into .ai. Though should I be using a solid or a shape layer or doesn't it matter ?
I can add a stroke which affects the color and thickness of the outlines OK.
However, I can't figure out how to add either a gradient fill or one that is 50% transparent ? Can anyone help ?
Oh ... I'll mention I'm using After Effects CS3.
Thanks.
Tim

Rick;
I've used Illustrator for quite a while both at home and at work but I really havn't had to do anything that complex yet. Same goes for Photoshop. I bought DVD tutorials for most of the productivity software I use and when you gave your first explanation, I watched the DVD tutorial on Importing into AE so I know what you're referring to when you say to import as composition. So far, I've only tried to import into AE by copying and pasting. I think that's why I just got the path and not the background. I'll try importing a composition shortly and see if I get the fill too. I actually found a tutorial on making the type of shape I need to in Photoshop so maybe I'll try that instead of Illustrator and then import that into AE.
Btw - It may not actually be a gradient fill I need to use but instead a solid fill with the top half lighter and buttom half darker.
In case you're interested, here's actually what I'm trying to create for a video project. I could actually buy the animation for $8 but I figured that this can't be that difficult and I need to learn this stuff anyway ... http://videohive.net/item/lower-third-15-different-colour-schemes/145337?WT.ac=category_th umb&WT.seg_1=category_thumb&WT.z_author=berol
Tim

How to add metadata on import

I can not for the life of me figure out how to add keywords on importing images. I have scoured the net looking for answers and cant find anything. I see the "Add Metadata from", but there is nothing underneath it where you can add information. The tutorial video from Apple shows fields underneath where you can add information, but I cant figure out how to get that to show up. This is driving me craaaazzzyy!! Any help sure would be appreciated!

I'm having the same issue as the image in the previous post. Anyone else have this too or a fix?
I am running 10.5.4 and the most recent version of Aperture w/ all updates
I have read thru the suggestions and deleted the plist files with no fix.
I also re-installed and the issue remains. The machine I am installing it on was just recently formatted and re-installed.
This is very confusing, looking forward to any help or suggestions.
Thanks,
Ian

How to add an importance factor to a query

Similar Messages

Maybe you are looking for