How to add audio to image sequence?

I've imported a Photoshop image sequence into FCP X 10.1.1.  Dropped it on the timeline, created a compound clip.  So far I can't figure out how to add audio of any kind.  I've tried starting over, making sure properties had audio setting enabled.  No change though.  No matter what I try, no audio tab in the inspector.  What am I missing?
Thanks,
Michael

Are you importing an audio file that is seperate? Otherwise it is attached to your video. in the timeline, choose expand audio & video. You can import almost any format. Import it into the same event that you are in - a song from your desktop or from your folder where you copied all your contents from your camera card or music from ITunes (in which case you use the audio tab on the far right of the timeline UNDER THE INSPECTOR).
How did you import your media?:
Help?

Similar Messages

  • Anyone know how to add audio without image and still use autoplay feature?

    Does anyone know how I can add audio to a webpage without having to add an image and still be able to use the autoplay feature? Adding as hyperlink doesn't accomplish what I'm after. Thanks in advance for the education!

    You can use the "hidden" song file method...
    http://roddymckay.com/Satellite/CatchTheTide.html
    You don't have to hide it completely if you don't want to - just reduce it to a small dot.

  • How to add audio WITHOUT images

    Hello,
    I'd like to add some audio files to my website without attaching images to them -- I can't seem to get rid of the grey 'drag image here' box that appears each time I drag audio to the page. Any ideas?
    Thanks!

    It only shows in iWeb.
    When you publish the page, the image is gone.

  • How to add audio with images

    Hello,
    I'd like to add some audio files to my website without attaching images to them -- I can't seem to get rid of the grey 'drag image here' box that appears each time I drag audio to the page. Any ideas?
    Thanks!

    The picture bin only shows in iWeb. When you publish only the control bar will be displayed.
    OT

  • I forget how to add audio to a document I have made.

    I forget how to add audio to a document I have made.

    lola2610 wrote:
    I can duplicate but that is not what I am looking for.
    This is what it is for. Save As doesn't change the behaviour of Autosave. All changes always get saved at all times. If you want to save as a new document, then do that. If you want to do a save as, just don't make any changes beforehand.
    Second problem is the load of internet pages! It is sooooo slow...
    Try a new DNS server such as OpenDNS. The ones your ISP gives you can be very bad.

  • How to add tooltip to images?

    How to add tooltips to images?

    OK, here is a more robust, more generic (any node) implementation.
    It would be nice if I could find a way to automatically insert the tooltips in the scene, but at time of node with tooltip creation, scene doesn't exist yet... Should have a post-layout event, perhaps. Or I can do that once on the onMouseEntered event, but then I have to find a way to get the scene holding a given node. Tried to iterate on Parents, but I can't cast a Parent to a Scene?
    Anyway, here is the new code:
    Tooltip.fx
    public class Tooltip extends CustomNode
      public var text: String;
      public var fill: Paint = Color.web('#EEFF00');
      public var stroke: Paint = Color.GREEN;
      var label: Label; // Make public to access textOverrun, textWrap, etc.?
      var back: Rectangle;
      override function create(): Node
        label = Label
          text: text
        back = Rectangle
          x: -2, y: -1
          width:  label.width + 4
          height: label.height + 2
          fill:   fill
          stroke: stroke
        Group
          content: [ back, label ]
      init
        visible = false;
        layoutInfo.managed = false;
    WithTooltip.fx
    public mixin class WithTooltip
      /** The tooltip to display. */
      public var tooltip: Tooltip;
      // We display the tooltip after a while being over the node
      var tooltipTL = Timeline
        keyFrames: KeyFrame
          time: 750ms
          action: function ()
    //~         println("visible {%.0f tooltip.boundsInParent.minX} {%.0f tooltip.boundsInParent.minY}");
            tooltip.visible = true;
      var baseMouseMoved;
      var baseMouseEntered;
      var baseMouseExited;
      postinit
        var tooltipNode = this as Node;
        baseMouseMoved = tooltipNode.onMouseMoved;
        tooltipNode.onMouseMoved = function (evt: MouseEvent): Void
          if (not tooltip.visible)
            tooltip.translateX = evt.sceneX;
            tooltip.translateY = evt.sceneY - 20;
          baseMouseMoved(evt);
        baseMouseEntered = tooltipNode.onMouseEntered;
        tooltipNode.onMouseEntered = function (evt: MouseEvent): Void
    //~       println("onMouseEntered: {%.0f evt.sceneX} {%.0f evt.sceneY}");
          tooltipTL.playFromStart();
          baseMouseEntered(evt);
        baseMouseExited = tooltipNode.onMouseExited;
        tooltipNode.onMouseExited = function (evt: MouseEvent): Void
    //~       println("onMouseExited");
          tooltipTL.stop();
          tooltip.visible = false;
          baseMouseExited(evt);
    SomeStage.fx
    class ImageWithTooltip extends ImageView, WithTooltip
    var earthTT = Tooltip { text: "Mother Earth" }
    var earth = ImageWithTooltip
         image: Image { url: "{__DIR__}earth.png" }
         tooltip: earthTT;
    var mapTT = Tooltip { text: "General map of France" }
    var map = ImageWithTooltip
         image: Image { url: "{__DIR__}map.jpg", width: 200, preserveRatio: true }
         tooltip: mapTT;
    // Put the ImageWithTooltip nodes in layout if needed, put the Tooltip nodes at the end of the scene (on top, out of any layout).

  • How to add audio to sequence of slides, not whole presentation nor individual slide?

    I want to add an audio track which will play during a sequence of slides in Keynote, but I can only find how to add to a single slide or add to whole presentation.

    Question asked and answered many times. Here is one…
    https://discussions.apple.com/message/12787720#12787720

  • Feature Request: Please allow us to merge audio with image sequence in AME.

    So far the only programs that allow this (that I'm aware of anyway) are the old version of QuickTime Pro, and Apple's Compressor. I simply want to add an image sequence to AME, and combine an audio track to that image sequence for export. This would save me an extra step. 80% of my work begins and ends in After Effects. I do very little video editing, so most of my exports are rendered from AE and then exported from Quicktime or Compressor to whatever file my clients request (Most often ProRes for a master version, and h264 or x264 Quicktime files for the web).
    Is it possible we might see this feature added anytime soon? Thanks!

    This is a good feature request and should be submitted here: Adobe - Feature Request/Bug Report Form
    The team reviews all the requests that come in through that form. It is a guaranteed way to get your request seen while we do not always see everything that gets posted to the forums.

  • FCutExpress HD 3.5, HOw do I Treat an Image Sequence as a Video clip?

    And edit it as if it was a video clip
    My images are an animation i exported from a 3d program, but i exported as IMage sequence using PNG format.
    I know how to import into Final cut,, but I'm not sure how to edit them as a BLOCK, and drag them to the viewer so i can workr with them as if it was a video clip.( I tried selecting them all in the timeline and dragging to the viewer and it seemed to work but in the viewer it was only one image(one frame ) )
    Then also how would i add video transitions and effects as if the image sequence was actually a video clip?

    Hi -
    You can use Quicktime Pro to make the clip, if your images are sequentially numbered. Open Quicktime, choose File>Open Image Sequence, and select the first frame of your images. Quicktime will ask what your frame rate you want and then create the movie.
    Once it is done, go File>Export and choose Movie to Quicktime Movie. Then select Options, and select the codec etc, that you want to edit with (DV, HDV, Animation, etc.) and then export the file and save the exported file.
    Import that file into FCE and you should be ready to go, it will behave like any other movie clip.
    Hope this helps.

  • Adding audio to image sequence

    Hello
    I've got a 5 minute animation where various sections need updating so the most obvious thing to do is render out an image sequence and just replace the pieces that are updated. The audio dosen't change and fits the length of my animation perfectly.
    I'd like to use AME CS6 for exporting to various formats as the presets are quite useful. I can load the image sequence no problem but I'd like to add the audio file to it. Can it be done? I can't find an obvious something-to-click button and I'm getting bored of copying and pasting in QTPro!
    Is it a feature request?

    Nick,
    Thank you for your reply.
    I would not have asked such a silly question I went to bed earlier.
    Thanks for your patience.
    The volume is at its maximum level.
    I am sure I am selecting the correct option in Sound in System Preferences.
    When I scratch the microphone I can see the blue markers move.
    The sound over in FCP works correctly and I allow it to proceed to its finish before I turn off the microphone.
    Using Quick Time as you suggested clearly works but again the voice over can barely be heard.
    I have selected an audio track,number 3 or lower and set in and out points in the video track.
    So I think I have followed the correct settings and indeed the volume of the voice was at a useful level the first time I used it.
    The problem is that since then my recording is barely audible,
    Michael.

  • HOW TO ADD TEXT TO IMAGES

    how do you add text to images in Aperture?

    the user can superimpose text (inc. metadata) anywhere: on the image, in the border, over both.
    Learn something new every single day...
    Regards
    TD

  • Audio for image sequence

    Hi all -
    I am doing some animation for a tv pilot and need to get the movie file into separate image sequence and audio files to import into my animation software. I was able to extract segments of the movie into image sequence, so that is no problem .... what i need to do is get the audio into a separate file. I tried sound to wav and ended up with a blank file.... i am using win xp .... any help would be appreciated.... thanks....

    It "sounds" (no pun intended) like your source file is "muxed". This is the format of Flash and MPEG 1 or 2. QuickTime Pro can't export the audio portion of the file.
    You'll need third party software to convert the file to QT formats (DV Stream is best).

  • How to Render a TIFF image sequence with After Effects or Premiere

    So I shot a timelapse in RAW using my D5200.  Developed the images, imported into after effects to make a composition at 1080p 24fps, the clip is 15 seconds long.  Then I rendered the clips a few ways and none of them are what I want:
    I used the H.264 first, its just pixelated and blocky, doesn't retain a smooth resolution. H.264 output an MP4 that was 6.5 MB.
    Then I tried lossless and it output an AVI which is awesome resolution but the file is 2 gigs! Not even VLC media player will play it smoothly without buffering.
    Last I tried H.264 BluRay which output an M4V file which is 45 MB and I can't get it to play.
    So now I'm here asking you all what the way to go is.  When I download films, I will aim for a 1-2 gig 720p or 1080p file on roughly 2hr films.  The resolution is great, the audio is great and the file like I said is only 1.5gigs average.  So what are the rendering settings I should be using to get a file like this? Should I be importing it into Premiere Pro first or what?
    -Thanks
    Bruno
    For Reference, here was my workflow:
    I generally followed an Adorama Rich Harrington Time-Lapse youtube video on workflow which was:
    Developed the Raw files in Camera Raw
    Used the Image Processor to create the Tif files
    Imported into After Effects as a TIF sequence
    Interpreted the sequence as 24fps
    Changed the Composition settings to 1080p 24fps
    Then did the rendering as detailed above

    1. You don't need to export your TIFF sequence so as to import it into After Effects, you can import RAW image sequence into After Effects directly. Camera RAW will start automatically on importing. What is more, you will be able to change your Camera RAW settings at any time you want inside your AE project: in Project panel select your RAW image sequence, right-click, choose Interpret Footage -> Main... In the dialog box click More Options... button (at bottom left), and Camera RAW opens.
    2. Do NOT export to H.264 out of After Effects directly. If you need to export your composition to H.264, export it out of Adobe Media Encoder. Start from HDTV preset. If your goal is to upload your media file on e.g. YouTube, done. If you want to play it back on your computer, but your mediaplayer can't playback it in real time, start to decrease bitrate settings. Keep in mind that modern AVCHD cameras shoot with 28 Mbps, first AVCHD camcorders were shooting with 17 Mbps, YouTube preset in Adobe Media Encoder sets bitrate to 10 Mbps, Vimeo preset - to 8 Mbps.
    Choose VBR, 2 Pass so as to benefit from better quality out of smaller file size.
    See this The Video Road blogpost on Understanding Colour Processing and benefits of Render at Maximum Depth option.
    3. If you're planning to use your After Effects composition in Premiere Pro project, you can use Adobe Dynamic Link. If your After Effects composition is quite complex, render a Digital Intermediate out of After Effects and import it into Premiere Pro. See this discissuon in AE Forum on some production codecs comparison.
    P.S. See also this FAQ: What are the best export settings? entry.

  • How to add audio track to Final Cut Express

    Does anyone know how to add a audio track to Final Cut Express? My default is four available tracks. What if I want to have 6? How can I add a additional two to the timeline?

    Move your cursor into the gray area below the A4 audio track, then control click and select Add Track.

  • How to make audio cd images in leopard?

    I'm not trying to duplicate music. much of my music doesnt have album art and track info. its stored as mp3 in itunes. itunes refuses to pull up track info as they were not imported by it. so what i am trying to do is make audio cd copies of it and then reimport it to itunes. now, i have like 2000 songs. burning an actual disk would be a pain. in windows i would normally use nero to make an audio cd 'image' which can be mounted into a virtual drive.
    using disk utility i figured out how disk images of cd and dvd sizes can be made but the burn disk option (in itunes) only shows the super drive burner to burn an audio cd image to. any help?
    Neerav Kothari
    Message was edited by: AceNeerav

    i.3d wrote:
    This hardly clears my doubt, however, my point stands, if the info is NOT in an MP3, burning it to a disc OR creating a CD image is NOT going to help you (or iTunes) find the unique CD ID and get the missing info. NO, NO, NO
    There's no "unique CD ID". All iTunes does is look at the number and the length of each track on the CD, and measure that against what's in the online database. The closest match is offered up. If there's nothing close, then nothing is offered up.
    I took a vinyl record and imported the whole thing as an AIFF file. I chopped up the tracks into little bits, and then used Toast to burn the results to a CD. iTunes recognized it as a commercial CD release of the same album, and downloaded the correct artwork and all the track names. I was blown away the first time it happened, and it has happened again several more times with various old vinyl albums.
    It hasn't worked every time, but it has worked enough times for me to believe that the OP will have luck with his .mp3 files if he can burn them into a playlist that closely resembles the original commercial CD.

Maybe you are looking for