How to add certain pages?

Suppose in ESS -> Appraisals
We have
a)My Appraisals
Under this we want to give a link which will display a pdf document (which is printable) for (say) 180 degree feed back.
How can I do that?
If
1) the pdf is only printable?
2) instead of the pdf there is a form and some table in

Hi Basu,
If you want to add custom pages to the Standard ESS / MSS, you have to add the required custom page to the Standard Page which is located at <b>Portal Content -> Content Provided by SAP -> End User Content -> Employee Self-Service -> Roles -> Employee Self-Service</b>
And if you want to display a pdf file in a iView, you can upload that pdf into portal KM and you can create a document iView of that and finaly you can use that iView in your custom page.
Thanks,
Trikanth

Similar Messages

How to add certain pages in ESS/MSS?

How to add certain pages?
Suppose in ESS -> Appraisals
We have
My Appraisals
Under this we want to give a link which will display a pdf document (which is printable) for (say) 180 degree feed back.
How can I do that?
If
1) the pdf is only printable?
2) instead of the pdf there is a form and some table in the ECC system needs to be loaded with the data provided in the form?

Hi Basu,
If you want to add custom pages to the Standard ESS / MSS, you have to add the required custom page to the Standard Page which is located at <b>Portal Content -> Content Provided by SAP -> End User Content -> Employee Self-Service -> Roles -> Employee Self-Service</b>
And if you want to display a pdf file in a iView, you can upload that pdf into portal KM and you can create a document iView of that and finaly you can use that iView in your custom page.
Thanks,
Trikanth

How to add addtitional pages in design view?

How do I create additional pages in design view? I have tried using NEW PAGE AFTER, but that doesnt add another page in design view, like I need.
I am creating a report that uses 8 subreports per page to dynamically create labels. Currently I have a report header, and am using the page header to arrange the subreports so the top of each subreport prints on the top of each label. The fields in the subreports can grow, and fill in the label from the top down.
I need to create a multiple pages using this format, but I dont know how to add more pages in design view. Essentially I need subreports 1-8 on page 1, 9-16 on page 2, etc. I would like to preserve the formatting I have created thus far, but I can always change it if I have to.

In attempting to create the label sheets I needed, I ended up creating 14 separate reports (which report on 6 individual queries), because there are 14 pages worth of labels that need to be created. What I wish to accomplish is to condense these 14 reports down to 6 reports. One for each query. What I absolutely cant find a way to do, is to get Crystal Reports to allow me to customize subreports on consecutive pages. Again, I have 8 subreports on each page, which have been formatted to fit on 8 labels when printed. Each subreport is identical in design, but has a different range selected (i.e. my driving value in each subreport has been modified with Select Expert to be between 1 and 5, or 6 and 10, or 11 and 15). This is how I have been able to return 5 consecutive results on each label, with the next label returning the following 5 results.
My ultimate question: Is it possible to create a multi-page report using this method?

How to add a page to newsletter template

how to add a page to newsletter template

Ich glaube du kannst auch Western Digital kaufen.
Es gibt von hier:
http://www.also.at
http://www.ingrammicro.at
http://www.littlebit.at
http://www.techdata.at
eBay
http://www.amazon.co.uk/Elements-Capacity-Portable-Drive-Windows/dp/B00CRZ2PRM/r ef=sr_1_2?ie=UTF8&qid=1390342709&sr=8-2&keywords=western+digital+1tb
Aber es macht nichts, etwas anderer Brand ist auch gut.
Peter

How to add a page in the SAP Scripts

Hi All,
I want to know how to add a page in the sap scripts. there is already sap script developed by some other person.
Now I have to add a page in front of that and have to add some more data.I added a page in page windows but thats not at all working.
Please help me out in this.
Thanks,
Praveen

new page will create in sap scripts using new page command.
you have to set condition like after some number of records displayed in page new page has to be trigger.
ex:YOU HAVE SO MANY RECORDS FOR PRINTING BUT YOU WANT TO DISPLAY 100 RECORDS IN FIRST PAGE REMAINING IN SECOND PAGE LIKE THAT.
Here you can use NEW PAGE COMMAND .
IT IS OPPOSITE PURPOSE OF PROTECT AND ENDPOTECT.
Reward if useful.

How to add blank page to existing Document In Adobe Dc

how to add blank page to existing Document In Adobe Dc Pro

Hi thashrifs16749461,
You can add a blank page using Adobe Acrobat DC by following the below instructions :-
1) Open your existing pdf document in Acrobat DC.
2) Choose the 'Organize Page' option form the Tools pane on the right as shown below in the screen shoot.
3) Now at the top you will see all the tools to Organize the page, Click on 'Insert' & select 'Blank Page' from the drop-down to insert blank pages.
*Shortcut : If you are using windows computer you can use ' Shift+Ctrl+T ' key to insert blank pages.
In case if you experience any issue or have any query please let us know. We will be happy to help you.
Regards,
Aadesh

How to add Google Page Rank bar to Firefox

How to add Google Page Rank bar to Firefox? With Chrome I can add an extension but how to do this with FireFox? Please give me the simplest and easiest solution.

You can search the Add-ons site for Firefox extensions and see whether you find one with good reviews.
https://addons.mozilla.org/firefox/

How to run certain pages under SSL in tomcat 5.5

hello..
can anyone tell me how to run certain pages of my web application under ssl for eg the login page,credit card info page etc...
I have enabled https://localhost:8080 in my tomcat creating a certificate keystore using
C:\Program Files\Java\jdk1.5.0_06\bin\keytool.exe
and my whole application is running under https..But due to performance measure the whole application can't run in https...So i want certain pages(sensetive) of my application to run in https and other in http..it will be so kind of you if anyone give me some idea regarding this...
thanks

A 503 response says
503 Service Unavailable
The server is currently unable to handle the request due to a
temporary overloading or maintenance of the server
You apparently have the server mis-configured. Recheck the configuration (or reinstall Tomcat per its instructions.)

How to add sub pages in iWeb templates

Anybody knows how to add a sub pages in the templates? I want to add sub pages under the main header, e.g. "About Us."

Just to say that you can do it in the way that Steve has already said and I did this on one of my sites and it worked really well.
Lets take your example of About George. You create your page About George and you include this page in your navigation menu. Now lets suppose that you have more that you want to add about George with two other pages - George at Work and George at Play. You want to link to these pages from About George, but you don't want the page names visible. Well, you can do this by creating the pages and then going to Inspector. Click on pages and then check don't include in navigation menu. Then you can create links on the About George page to get to the other pages George at Work and George at Play - use shapes or text boxes to create these with something like Back and Next on those pages to take you forward to the next page and then back to the main page.
I think you will need to create your own nav bar to be able to achieve this, as it means linking to different pages, but it does work well.

How to add web page in office button of ms office 2007 using c#?

I want to add web page in office button in ms office 2007 using c#. How to add it? ribbon menu button should be in office button. when i click menu the web page should display in menu itself. tell me the solution.

Hello,
You can't place anything in the Ribbon UI (aka Fluent UI), only the predefined set of controls according to the Ribbon XML scheme. Read more about the Fluent UI in the following series of articles in MSDN:
Customizing the 2007 Office Fluent Ribbon for Developers (Part 1 of 3)
Customizing the 2007 Office Fluent Ribbon for Developers (Part 2 of 3)
Customizing the 2007 Office Fluent Ribbon for Developers (Part 3 of 3)
Consider opening a web browser in a child window (separate) or using a task pane for that.

Absolute Beginner Question: How to add a page?

Dumb question, I know, but I'm brand new. How do I add a page to the portal. In
other words, how do I add a tab to the primary navigation and point it to a page
template for loading page-specific portlets?

Nevermind. My functionality was hidden in the EBusiness Control Center and I had
to scroll right to see the required buttons. Found it.

I need to learn how to add a page at the end of my video to put credits?

I am editing for the first time EVER and need to know how to add credits to the end of a video

There are different ways to add credits. Did you have anything particular in mind?
You may find some ideas here:
How to Create Scrolling Movie Credits in Adobe Premiere Pro - YouTube
https://helpx.adobe.com/premiere-pro/using/rolling-crawling-titles.html
Creating and Editing Titles

How to add PDF pages in Preview?

Did Mavericks remove this feature?
I used to be able to drag PDF pages from a second PDF document into the first PDF document, but can no longer do so.

Add a page to a PDF: Select Edit > Insert, then choose Page from Scanner, Page from File, or Blank Page.A blank page is inserted before the current page. Use the blank page to add annotations or change the document’s pagination when it’s printed.
The above is from Preview's Help.

How to add PDF pages to existing PDF?

I have always dragged a PDF into an existing PDF to add to our files. It will not let me insert into the PDF file with the new download.

If you were able to do that, then you had Adobe Acrobat and not Adobe Reader. REader has never let you add/remove pages or do any editing (outside of a few special abilities) at all.

How to add blank page to document in progress...how to combine documents

As a long-time pagemaker user, I'm adjusting to Pages 2. I'm creating a photo directory using various sized photos, masked with shapes, along with small captions, half-page format. My problem. How can I add pages as I go along, without all that Greek placeholder type? (My first 9 pages are 99 MB). I'm thinking of creating the document in 10-page segments, then combining them before sending to our local printer. Is there any way to avoid the underlying text page layout that seems to rule the roost?
Thanks,
Slang.

Hello rotorboss,
first the last: there is no way in Pages to link images. All objects and media you insert into a document is stored into the package folder. But you can reduce the file size if you are able to handle an image editor. I think you have inserted your images directly from iPhoto, right? This means the images are in full resolution and size. But for 99 % of all images this is far more then needed.
Here is a post I wrote yesterday that will help you to reduce the size of your Pages document: http://discussions.apple.com/thread.jspa?messageID=2711166&#2711166. If you need more details for image editing, feel free to ask.
To give you an example of document sizes: I am writing manuals and handbooks with 350+ pages and 300+ images (most for tutorials). Most of this images are screenshots and so they are only 72 dpi in resolution. But there are a few photos as well (the biggest is 10.5 mb in TIFF format (19.5 x 12.5 cm, 300 dpi) and I have reduced it to 4.3 mb in PNG format (19.5 x 12.5 cm, 300 dpi)). This documents have file sizes between 3 mb and 25 mb.
The only big problem is the use of CMYK images, because PNG can't handle this color format. So you have to use JPEG with good quality setting. To give you an example: the same image I mentioned above is 13.5 mb in size as a CMYK image. As a JPEG with 100 % quality and baseline optimisation you get a file size of 4.2 mb, but JPEGs compression is not lossless. In some special motifs you will get block artifacts. So you can choose the file type you want to use.

How to add certain pages?

Similar Messages

Maybe you are looking for