How to add color only in header
how to add color only in header and arrange a background color selected from desktop
You can place rectangle in header section on master page which would be applied on sub pages and then fill rectangle with color.
If you are after a specific color then simply use color code and fill.
Thanks,
Sanjit
Similar Messages
-
how to add colore to the particular fields in alvs?
could u plz explain clearly with code and commentsHi,
go thr below code,
tables used -
tables: mkpf,
mseg,
lfa1,
makt.
global hashed tables used
data: begin of wa_mkpf, "header
mblnr like mkpf-mblnr,
mjahr like mkpf-mjahr,
budat like mkpf-budat,
xblnr like mkpf-xblnr,
end of wa_mkpf.
data: ht_mkpf like hashed table of wa_mkpf
with unique key mblnr mjahr
with header line.
data: st_mkpf like standard table of wa_mkpf
with header line.
data: begin of wa_mseg, " line items
mblnr like mseg-mblnr,
mjahr like mseg-mjahr,
zeile like mseg-zeile,
bwart like mseg-bwart,
charg like mseg-charg,
matnr like mseg-matnr,
lifnr like mseg-lifnr,
erfmg like mseg-erfmg,
erfme like mseg-erfme,
end of wa_mseg.
data ht_mseg like hashed table of wa_mseg
with unique key mblnr mjahr zeile
with header line.
data st_mseg like standard table of wa_mseg
with header line.
cache structure for lfa1 records
data: begin of wa_lfa1,
lifnr like lfa1-lifnr,
name1 like lfa1-name1,
end of wa_lfa1.
data ht_lfa1 like hashed table of wa_lfa1
with unique key lifnr
with header line.
cache structure for material related data
data: begin of wa_material,
matnr like makt-matnr,
maktx like makt-maktx,
end of wa_material.
data: ht_material like hashed table of wa_material
with unique key matnr
with header line.
result table
data: begin of wa_lst, "
budat like mkpf-budat,
mblnr like mseg-mblnr,
lifnr like mseg-lifnr,
name1 like lfa1-name1,
xblnr like mkpf-xblnr,
zeile like mseg-zeile,
charg like mseg-charg,
matnr like mseg-matnr,
maktx like makt-maktx,
erfmg like mseg-erfmg,
erfme like mseg-erfme,
mjahr like mseg-mjahr,
end of wa_lst.
data: ht_lst like hashed table of wa_lst
with unique key mblnr mjahr zeile
with header line.
data: begin of wa_lst1, " sumary by material
matnr like mseg-matnr,
maktx like makt-maktx,
erfmg like mseg-erfmg,
erfme like mseg-erfme,
color_line(4) TYPE c, " Line color
color_cell TYPE lvc_t_scol, " Cell color
celltab type LVC_T_STYL,
end of wa_lst1.
data: ht_lst1 like hashed table of wa_lst1
with unique key matnr
with header line.
structures for alv grid display.
itabs
type-pools: slis.
data: it_lst like standard table of wa_lst with header line,
it_fieldcat_lst type slis_t_fieldcat_alv with header line,
it_sort_lst type slis_t_sortinfo_alv,
it_lst1 like standard table of wa_lst1 with header line,
it_fieldcat_lst1 type slis_t_fieldcat_alv with header line,
it_sort_lst1 type slis_t_sortinfo_alv.
structures
data: wa_sort type slis_sortinfo_alv,
ls_layout type slis_layout_alv.
color management.
DATA : wa_color TYPE lvc_s_scol.
Internal table for color management.
DATA : it_color TYPE TABLE OF lvc_s_scol.
itab for input enabling.
DATA: lt_celltab TYPE lvc_t_styl. "
global varialbes
data: g_lines type i.
data: g_repid like sy-repid,
ok_code like sy-ucomm.
selection-screen
"text: Dates:
select-options: so_budat for mkpf-budat default sy-datum.
"text: Material numbers.
select-options: so_matnr for mseg-matnr.
selection-screen uline.
selection-screen skip 1.
"Text: show summary by material.
parameters: gp_bymat as checkbox default ''.
parameters: gp_hier as checkbox default 'X'.
start-of-selection.
perform get_data.
perform show_data.
end-of-selection.
FORM get_data *
form get_data.
select mblnr mjahr budat xblnr
into table ht_mkpf
from mkpf
where budat in so_budat. " make use of std index.
have we retrieved data from mkpf?
describe table ht_mkpf lines g_lines.
if g_lines > 0.
if true then retrieve all related records from mseg.
Doing this way we make sure that the access is by primary key
of mseg.
The reason is that is faster to filter them in memory
than to allow the db server to do it.
select mblnr mjahr zeile bwart charg
matnr lifnr erfmg erfme
into table ht_mseg
from mseg
for all entries in ht_mkpf
where mblnr = ht_mkpf-mblnr
and mjahr = ht_mkpf-mjahr.
endif.
fill t_lst or t_lst1 according to user's choice.
if gp_bymat = ' '.
perform fill_ht_lst.
else.
perform fill_ht_lst1.
endif.
endform.
form fill_ht_lst.
refresh ht_lst.
Example: how to discard unwanted data in an efficient way.
loop at ht_mseg.
filter unwanted data
check ht_mseg-bwart = '101' or ht_mseg-bwart = '901'.
check ht_mseg-matnr in so_matnr.
read header line.
read table ht_mkpf with table key mblnr = ht_mseg-mblnr
mjahr = ht_mseg-mjahr.
clear ht_lst.
* note : this may be faster if you specify field by field.
move-corresponding ht_mkpf to ht_lst.
move-corresponding ht_mseg to ht_lst.
perform read_lfa1 using ht_mseg-lifnr changing ht_lst-name1.
perform read_material using ht_mseg-matnr changing ht_lst-maktx.
insert table ht_lst.
endloop.
endform.
form fill_ht_lst1.
data: colorear.
refresh ht_lst1.
Example: how to discard unwanted data in an efficient way.
hot to simulate a collect in a faster way
loop at ht_mseg.
filter unwanted data
check ht_mseg-bwart = '101' or ht_mseg-bwart = '901'.
check ht_mseg-matnr in so_matnr.
* note : this may be faster if you specify field by field.
read table ht_lst1 with table key matnr = ht_mseg-matnr
transporting erfmg.
if sy-subrc <> 0. " if matnr doesn't exist in sumary table
" insert a new record
clear ht_lst1.
ht_lst1-matnr = ht_mseg-matnr.
perform read_material using ht_mseg-matnr changing ht_lst1-maktx.
ht_lst1-erfmg = ht_mseg-erfmg.
ht_lst1-erfme = ht_mseg-erfme.
if colorear = ''.
colorear = 'X'.
refresh it_color.
ht_lst1-color_cell[] = it_color[].
MOVE 'C410' TO ht_lst1-color_line.
else.
colorear = ' '.
refresh it_color. clear it_color.
MOVE 'MATNR' TO wa_color-fname.
MOVE '6' TO wa_color-color-col.
MOVE '1' TO wa_color-color-int.
MOVE '1' TO wa_color-color-inv.
APPEND wa_color TO it_color.
MOVE 'MAKTX' TO wa_color-fname.
MOVE '3' TO wa_color-color-col.
MOVE '1' TO wa_color-color-int.
MOVE '1' TO wa_color-color-inv.
APPEND wa_color TO it_color.
MOVE 'ERFMG' TO wa_color-fname.
MOVE '5' TO wa_color-color-col.
MOVE '1' TO wa_color-color-int.
MOVE '1' TO wa_color-color-inv.
APPEND wa_color TO it_color.
ht_lst1-color_cell[] = it_color[].
clear ht_lst1-color_line.
endif.
insert table ht_lst1.
else." a record was found.
" collect erfmg. To do so, fill in the unique key and add
" the numeric fields.
ht_lst1-matnr = ht_mseg-matnr.
add ht_mseg-erfmg to ht_lst1-erfmg.
modify table ht_lst1 transporting erfmg.
endif.
endloop.
endform.
implementation of cache for lfa1.
form read_lfa1 using p_lifnr changing p_name1.
read table ht_lfa1 with table key lifnr = p_lifnr
transporting name1.
if sy-subrc <> 0.
clear ht_lfa1.
ht_lfa1-lifnr = p_lifnr.
select single name1
into ht_lfa1-name1
from lfa1
where lifnr = p_lifnr.
if sy-subrc <> 0. ht_lfa1-name1 = 'n/a in lfa1'. endif.
insert table ht_lfa1.
endif.
p_name1 = ht_lfa1-name1.
endform.
implementation of cache for material data
form read_material using p_matnr changing p_maktx.
read table ht_material with table key matnr = p_matnr
transporting maktx.
if sy-subrc <> 0.
ht_material-matnr = p_matnr.
select single maktx into ht_material-maktx
from makt
where spras = sy-langu
and matnr = p_matnr.
if sy-subrc <> 0. ht_material-maktx = 'n/a in makt'. endif.
insert table ht_material.
endif.
p_maktx = ht_material-maktx.
endform.
form show_data.
if gp_hier = 'X'. "no anda.
perform show_hierarchicalALV.
else.
if gp_bymat = ' '.
perform show_ht_lst.
else.
perform show_ht_lst1.
endif.
endif.
endform.
form show_hierarchicalALV.
st_mkpf[] = ht_mkpf[].
st_mseg[] = ht_mseg[].
call function 'REUSE_ALV_HIERSEQ_LIST_DISPLAY'
exporting
I_INTERFACE_CHECK = ' '
I_CALLBACK_PROGRAM =
I_CALLBACK_PF_STATUS_SET = ' '
I_CALLBACK_USER_COMMAND = ' '
IS_LAYOUT =
IT_FIELDCAT =
IT_EXCLUDING =
IT_SPECIAL_GROUPS =
IT_SORT =
IT_FILTER =
IS_SEL_HIDE =
I_SCREEN_START_COLUMN = 0
I_SCREEN_START_LINE = 0
I_SCREEN_END_COLUMN = 0
I_SCREEN_END_LINE = 0
I_DEFAULT = 'X'
I_SAVE = ' '
IS_VARIANT =
IT_EVENTS =
IT_EVENT_EXIT =
i_tabname_header =
i_tabname_item =
I_STRUCTURE_NAME_HEADER =
I_STRUCTURE_NAME_ITEM =
is_keyinfo =
IS_PRINT =
IS_REPREP_ID =
I_BUFFER_ACTIVE =
I_BYPASSING_BUFFER =
IMPORTING
E_EXIT_CAUSED_BY_CALLER =
ES_EXIT_CAUSED_BY_USER =
tables
t_outtab_header = st_mkpf
t_outtab_item = st_mseg
EXCEPTIONS
PROGRAM_ERROR = 1
OTHERS = 2
if sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
endif.
endform.
form show_ht_lst.
"needed because the FM can't use a hashed table.
it_lst[] = ht_lst[].
perform fill_layout using 'full display'
changing ls_layout.
perform fill_columns_lst.
perform sort_lst.
g_repid = sy-repid.
call function 'REUSE_ALV_GRID_DISPLAY'
exporting
i_callback_program = g_repid
i_callback_pf_status_set = 'SET_PF_STATUS'
is_layout = ls_layout
it_fieldcat = it_fieldcat_lst[]
it_sort = it_sort_lst
tables
t_outtab = it_lst
exceptions
program_error = 1
others = 2.
endform.
form show_ht_lst1.
"needed because the FM can't use a hashed table.
it_lst1[] = ht_lst1[].
perform fill_layout using 'Sumary by matnr'
changing ls_layout.
perform fill_columns_lst1.
perform sort_lst.
g_repid = sy-repid.
call function 'REUSE_ALV_GRID_DISPLAY'
exporting
i_callback_program = g_repid
i_callback_pf_status_set = 'SET_PF_STATUS'
is_layout = ls_layout
it_fieldcat = it_fieldcat_lst1[]
it_sort = it_sort_lst
tables
t_outtab = it_lst1
exceptions
program_error = 1
others = 2.
endform.
form fill_layout using p_window_titlebar
changing cs_layo type slis_layout_alv.
clear cs_layo.
cs_layo-window_titlebar = p_window_titlebar.
cs_layo-edit = 'X'.
cs_layo-edit_mode = space.
MOVE 'COLOR_LINE' TO cs_layo-info_fieldname.
Field that identify cell color in inetrnal table
MOVE 'COLOR_CELL' TO cs_layo-coltab_fieldname.
move 'CELLTAB' TO cs_layo-stylefname.
endform. " armar_layout_stock
form set_pf_status using rt_extab type slis_t_extab.
create a new status
and then select extras -> adjust template -> listviewer
set pf-status 'VISTA'.
endform. "set_pf_status
define add_lst.
clear it_fieldcat_lst.
it_fieldcat_lst-fieldname = &1.
it_fieldcat_lst-outputlen = &2.
it_fieldcat_lst-ddictxt = 'L'.
it_fieldcat_lst-seltext_l = &1.
it_fieldcat_lst-seltext_m = &1.
it_fieldcat_lst-seltext_m = &1.
if &1 = 'MATNR'.
it_fieldcat_lst-emphasize = 'C111'.
endif.
append it_fieldcat_lst.
end-of-definition.
define add_lst1.
clear it_fieldcat_lst.
it_fieldcat_lst1-fieldname = &1.
it_fieldcat_lst1-outputlen = &2.
it_fieldcat_lst1-ddictxt = 'L'.
it_fieldcat_lst1-seltext_l = &1.
it_fieldcat_lst1-seltext_m = &1.
it_fieldcat_lst1-seltext_m = &1.
append it_fieldcat_lst1.
end-of-definition.
form fill_columns_lst.
set columns for output.
refresh it_fieldcat_lst.
add_lst 'BUDAT' 10.
add_lst 'MBLNR' 10.
add_lst 'LIFNR' 10.
add_lst 'NAME1' 35.
add_lst 'XBLNR' 15.
add_lst 'ZEILE' 5.
add_lst 'CHARG' 10.
add_lst 'MATNR' 18.
add_lst 'MAKTX' 30.
add_lst 'ERFMG' 17.
add_lst 'ERFME' 5.
add_lst 'MJAHR' 4.
endform.
form fill_columns_lst1.
set columns for output.
refresh it_fieldcat_lst1.
add_lst1 'MATNR' 18.
add_lst1 'MAKTX' 30.
add_lst1 'ERFMG' 17.
add_lst1 'ERFME' 5..
endform.
Horacio Zapettini
Program to Calculate FI Opening Balance
How to find the Opening balance for a given period in FI Module for a Particular GL A/c.
I was calculated opening balance, code is below maybe it will be helpful.
*find period.
CALL FUNCTION 'DATE_TO_PERIOD_CONVERT'
EXPORTING
i_date = s_budat-low
i_periv = i_tab-periv "'K4'
IMPORTING
e_buper = v_donem
e_gjahr = v_gjahr
EXCEPTIONS
input_false = 1
t009_notfound = 2
t009b_notfound = 3
OTHERS = 4.
*calc opening balance hesabý
SELECT * FROM knc1 WHERE kunnr = i_tab-kunnr
AND bukrs = i_tab-bukrs " s_bukrs
AND gjahr EQ v_gjahr.
v_dnm = v_donem.
opening balance first calc > old year ,
WHILE v_dnm > 1.
v_dnm = v_dnm - 1.
CONCATENATE 'knc1-um' v_dnm 's' INTO v_field_name_borc.
CONCATENATE 'knc1-um' v_dnm 'h' INTO v_field_name_alacak.
ASSIGN (v_field_name_borc) TO old
add days which is from selected date-low month
IF v_donem > 1.
v_dnm = v_donem - 1.
ELSE.
v_dnm = v_donem.
ENDIF.
SELECT SINGLE * FROM t009b WHERE periv = i_tab-periv "'K4'
AND bdatj = s_budat-low+0(4)
AND poper = v_dnm.
t009b-butag = t009b-butag + 1.
IF s_budat-low+6(2) NE t009b-butag.
v_date_high = s_budat-low - 1.
IF v_donem = 1.
v_date_low = s_budat-low.
v_date_low+4(4) = '0101'.
ELSE.
CONCATENATE t009b-bdatj t009b-bumon t009b-butag INTO
v_date_low.
ENDIF.
SELECT * FROM bsad WHERE bukrs EQ i_tab-bukrs "IN s_bukrs
AND kunnr = i_tab-kunnr
AND budat BETWEEN v_date_low AND
v_date_high
AND umskz = space
AND blart IN s_blart.
IF bsad-shkzg = 'S'.
i_tab-dmbtr_s = i_tab-dmbtr_s + ( bsad-dmbtr ).
ELSEIF bsad-shkzg = 'H'.
i_tab-dmbtr_h = i_tab-dmbtr_h + ( bsad-dmbtr ).
ENDIF.
ENDSELECT.
SELECT * FROM bsid WHERE bukrs EQ i_tab-bukrs "IN s_bukrs
AND kunnr = i_tab-kunnr
AND budat BETWEEN v_date_low AND
v_date_high
AND umskz = space
AND blart IN s_blart.
AND gsber IN gsber.
IF bsid-shkzg = 'S'.
i_tab-dmbtr_s = i_tab-dmbtr_s + ( bsid-dmbtr ).
ELSEIF bsid-shkzg = 'H'.
i_tab-dmbtr_h = i_tab-dmbtr_h + ( bsid-dmbtr ).
ENDIF.
ENDSELECT.
ENDIF.
"opening balance ( þirket bazlý )z1 degeri
i_tab-z1 = i_tab-z1 + ( knc1-umsav + i_tab-dmbtr_s - i_tab-dmbtr_h ).
for israel
i_tab-dmbtril_s = i_tab-dmbtr_s .
i_tab-dmbtril_h = i_tab-dmbtr_h .
ENDSELECT.
reward if useful. -
How to add a image to header of exporting pdf in devexpress gridview
hi guys ;
how to add a image to header of exporting pdf in devexpress gridview contentHi Aly14,
I am not sure what the type of your project was, is it a C# project or an asp.net project?
If would be helpful if you could share us more information about your issue.
In addition, I made a research about your issue and I think the links below might be useful to you:
# ASPxGridView insert an image for Header and Footer sections for pdf export
https://www.devexpress.com/Support/Center/Question/Details/Q37155
# Adding an "Export Header" to PDF export in MvcGridView
https://www.devexpress.com/Support/Center/Question/Details/T141918
Best Regards,
Edward
This response contains a reference to a third party World Wide Web site. Microsoft is providing this information as a convenience to you. Microsoft does not control these sites and has not tested any software or information found on these sites; therefore,
Microsoft cannot make any representations regarding the quality, safety, or suitability of any software or information found there. There are inherent dangers in the use of any software found on the Internet, and Microsoft cautions you to make sure that you
completely understand the risk before retrieving any software from the Internet.
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click HERE to participate the survey. -
Hi Experts, oo hierarchical alv, how to add checkbox on every header?
Hi Experts,
I am working on oo hierarchical alv, how can I add checkbox on every header? thanks in advance!
Kind regards
DawsonHi Dawson,
Just refer the below program & pass the check box functionality (mentioned in bold) in REUSE_ALV_HIERSEQ_LIST_DISPLAY in your program.
TYPE-POOLS : slis.
Data
DATA : BEGIN OF itab OCCURS 0.
INCLUDE STRUCTURE t001.
DATA : flag tyPE c,
END OF itab.
DATA : alvfc TYPE slis_t_fieldcat_alv.
DATA : alvly TYPE slis_layout_alv.
Select Data
SELECT * FROM t001 INTO TABLE itab.
*------- Field Catalogue
CALL FUNCTION 'REUSE_ALV_FIELDCATALOG_MERGE'
EXPORTING
i_program_name = sy-repid
i_internal_tabname = 'ITAB'
i_inclname = sy-repid
CHANGING
ct_fieldcat = alvfc
EXCEPTIONS
inconsistent_interface = 1
program_error = 2
OTHERS = 3.
Display
alvly-box_fieldname = 'FLAG'.
CALL FUNCTION 'REUSE_ALV_LIST_DISPLAY'
EXPORTING
it_fieldcat = alvfc
i_callback_program = sy-repid "<-------Important
i_callback_user_command = 'ITAB_USER_COMMAND' "<------ Important
is_layout = alvly
TABLES
t_outtab = itab
EXCEPTIONS
program_error = 1
OTHERS = 2.
CALL BACK FORM
FORM itab_user_command USING whatcomm TYPE sy-ucomm whatrow TYPE
slis_selfield.
LOOP AT itab.
itab-flag = 'X'.
MODIFY itab.
ENDLOOP.
IMPORTANT.
WHATROW-REFRESH = 'X'.
ENDFORM. "ITAB_user_command
Regards
Abhii... -
How to add month to dashboard header?
Hi Experts,
we have calmonth coming from a cube and that is supplied to a query and this query is the source for the dashboard. i need to add calmonth to dashboard header ? please give ur inputs..
we are broadcasting to portal with bex broadcaster settings.
points will be assigned.
ThanksYou can place rectangle in header section on master page which would be applied on sub pages and then fill rectangle with color.
If you are after a specific color then simply use color code and fill.
Thanks,
Sanjit -
How to add new custom SOAP header when generate webservice?
Hi
When invoke an external webservice, SOA Gateway provide a method to add new customized SOAP Header, via extending seeded java function "WebServiceInvokerSubscription".
And in case of generating a new webservice in EBS, is there some similar method to add new customized SOAP header in the webservice?
Thanks
JamesLook at your Payment Process Profile. THere should be a reporting subtab and within that subtab is a Separate Remittance Advice region. I believe that is where you specify the format for the remittance advice document (which is built in XML Publisher). Take a look at that.
John Dickey -
How to add colors to a CSV file?
Hi there,
I'm exporting data to a CSV file using printWriter.
Question: is it possible to add colors, bold text or stretch the length of a column in the produced CSV file?
This, of course, should be the end result of the file (not do it when the file is open)
Thank you!xianwinwin wrote:
Question: is it possible to add colors, bold text or stretch the length of a column in the produced CSV file?Of course if you assumed that you'd be looking at the file with a fixed-width font, you could insert a bunch of tabs or spaces to get columns to match up, but I strongly advise you not do that. I think of CSV as a poor-man's excel data file or perhaps a flat database file, but most importantly it holds data in a standard format that can be read and manipulated by many different programs, including ones you write yourself. It is not meant to be for pretty visualization. Try to pretty it up and you possibly ruin it's main reason for existing. For nice visualization I'd create a small app that read the CSV, formatted it nicely and either displayed the data or stored it in some pretty format as a non-CSV file. -
How to add item in column header
How can i add an messageStyled item(or any item) in column header? if so how can i do this
Standard framework feature allows to add only a sortable header bean in a column header which holds some of the UI and runtime properties for that column.
If you can explain your requirement, we can suggest the way to achieve that.
--Shiv -
How to add field to the header for FBL5N ALV report
Hi,
I need to add fields to the customer line item display ALV report(FBL5N) header part.Right now there are four fields in the header like customer, company code, name and city, after that I need to add first name last name and phone no. Can any one tell me where exactly I need to add and populate there fields to be appear in ALV output list.
Thanks in Advance
SwapnaYes I have tried, I have place a break point in that perform but it does not stop. I think that is not the correct place to added and populate fields. That routine is for populate selection screen ranges single and multiple values and parameters only.
Thanks
Swapna -
How to add links to portlet header ?
I want to add a print link to the portlet header, along with Customize, Help, About etc
Is there any way to do this ? (Using PDK, java or pl/sql)Andrew,
From web providers' perspective, you should be able to do this. Constructing the portlet header involves constructing the title link & then adding the action parameter links for all the modes that have been enabled using the provider.xml. The title part is constructed by the method renderTitle() in oracle.portal.provider.v2.render.DefaultContainerRenderer while action parameters (i.e. "Customize","help" etc) are rendered by renderActions(). This method internally invokes renderAction() which by default would render the locale specific text for that mode. So to fulfil your requirement you will have to create your own Container Renderer by extending the DefaultContainerRenderer and overriding the method renderActions() to incorporate one more link on the header.
Having said that, all the links on the portlet header are mapped to a unique mode. I don't think that you should be creating a new mode for this (would involve extending a lot of JPDK framework classes), but am not aware of how the flow will happen once the "print' is clicked by the user. Perhaps, JPDK gurus can throw some light on this.
Regards,
Abhinav -
Hi everyone:
I need to use different color for backgrounds than those i
see in the color palette, ?How can i add another colors?.
Thanks.Hola Mauricio
Mira yo te puedo ayudar pero no se como explicartelo en ingles.
Si hablas castellano me lo dices y con gusto te ayudo.
Saludos -
How to add colors instead of overlap
I have drawn two boxes of red and green (solid). Since they are of
smaller size than the background, I am able to move them around using
the cursor.
When I overlap one over another, the one on the top hides the bottom
one.
How can I add these two colors? I.e. in the area where red and green
are overlapping, it should become yellow.
I want to do it with out reducing the opacity.
Does anyone know how to do it?
Thanks in advance.
AlexChange the Blending Mode of the top layer to Screen. This includes all the lower layers, including the background, which you may not want. To get around this, group the two layers you are combining, and then set the Blending Mode for the group from Pass Through to Normal.
EDIT:
Said it before, and I'm sure I'll say it again: I have GOT to type faster! -
How to add coloring to Calendar
For the longest time we wished we could have some color formatting in the Calendar web part. I just stumbled on some instructions for how to do that, and they actually worked.They are herehttp://blog.metrostarsystems.com/2014/07/16/sharepoint-2013-any-color-coded-calendar-step-by-step/Here's a low-quality image of my SharePoint page, you can see some of the colors in the calendar. Blue , of course, is the built in color.. I added the green , orange, red and dark blue.
This topic first appeared in the Spiceworks CommunityViewing the calendar, with the day selected you want to add the appointment to, tap on the + in the upper right corner of Calendar and that will bring up the add box.
-
How to add columns (fields) to header section of an alert e-mail?
Hi all,
In a standard out of the box alert template, I want to add custom fields (e.g. Notes, Value p.a.) to the body of an alert e-mail, see photo:
These cannot be any list/library built-in columns like 'Created', 'Created By' etc.
The class responsible for those column in 'Alerttemplate.xml' is:
<![CDATA[ </tr> </table> </td></tr></table> </td> </tr> <tr> <td class="vh" colspan="2">$Resources:Alerts_event_title;</td> <td class="vh">$Resources:Alerts_event_modified;</td> <td class="vh">$Resources:Alerts_event_modifiedby;</td> <td class="vh"> </td> </tr> <tr> <td colspan="5" class="rulerow"> </td> </tr> ]]>
How can I add additional fields to that?Since there was no input from anyone on the forum, I have come up with a following workaround:
I could not add any more columns to the alert e-mail body for edited items so I used a 'Title' column to combine all the columns a wanted to display in the e-mail alert.
These were the 'Prefix' - 'Suffix' 'Product' columns. On 'Edit' and 'New' forms, there is a piece of jquery to combine those 3 columns and store the value in a 'Title' column which is appropriately hidden from the views and forms. There is no 'Quick Edit'
switched on in the list so jquery will always run setting a 'Title' column correctly.
Users can see the relevant information right in their inbox so they won't have to log in to SP remotely to look up this information. -
How to add colors from one doc to another in CS2
I thought I could pull a text frame with text and colors in fill background out to the sideboard to create a snippet but it didn't work.
Is this only in CS3? or what is the easiest way to transfer swatches between docs?Unable to change black default setting in Win IDCS2.
Somehow, I managed to change the default black swatch to a value other than black--and I can't get rid of it! I didn't think it was possible to change this default black setting, but I did, and now everything--type and graphics--has shifted to that value. I'm trying to print to monochrome. The PDF file of all documents I print reflect that color PMS output value, even though I set the output to "composite gray, text as black." I've tried to import the swatches palate from previous documents, but that doesn't change the black setting. What can I do to get my default black setting back?
Thanks, Mike
Maybe you are looking for
-
Edit Size for Numeric fields - 2007 vs. 2005
Hi, I set up a user-defined field with VB code in 2005 with an edit size of one; no problem. The same code in 2007 fails saying that the field size deviates from legal range [1...11]. The "1" I am using is in the range. Any ideas? Thx, mike
-
Short version: When viewing ".mp3" files in a "Tags" window, the information in the "name" column next to the file defaults to the information in the "song" field in the file's ID3 tag. Is it possible to change have the "name" column display the actu
-
Flash CS5.5 - Out of memory
Hi, I have a project here that, all of the sudden, I can't export the SWF. The first couple of times it gave me and "out of memory" error in the Java subsystem or something and to change the value of memory in the jvm.ini. I did but nothing changed.
-
Unable to uninstall Illustrator
why cant i uninstall the programme? it asked me to use creative cloud cleaner, but when i did, it makes no diffenrence. i still cant uninstall the programme. help anyone?
-
Batch remove filename spaces AFTER import?
Hi there - Fairly knowledgeable about workflow and best practices in LR. This time I built a new catalog for a non-photo project and imported 250+ variously named images - wanting to keep the unique names. Now that I'm exporting I realized I forgot t