How to add column in Dynamic VO

Hello All,
We are on 11.5.10 and
i am trying to add a column toProduct - Supplier Items - click Orders page
when i click about this page it is showing this
POS_SUPPLIER_INQUIRIES177_POS_PO_LINES_D2177_177POS_PO_LINES_DDynamicVO
This has Dynamci VO.
How do i add column to this view.
It seems that this view is based on AK Region POS_PO_LINES_D and this region is based on a view POS_PO_LINES_V.
Please help me in doing this.
Thanks,
Mehta.

Check the page's controller code. That will point you to the base definition of the VO used in the dynamic view.
--Shiv

Similar Messages

How to add column dynamically based on user input in oracle?

**how to add column dynamically based on user input in oracle?**
I am generating monthly report based on from_date to to_date below is my requirement sample table
EMPLOYEE_CODE| Name | CL_TAKEN_DATE | CL_BALANCE | 01-OCT-12 | 02-OCT-12 | 03-OCT-12
100001.............John...........02-OCT-12...............6
100002.............chris...........01-OCT-12...............4
Based on user input, that is, if user need the report from 01-OCT-12 TO 03-OCT-12, i need to add that dates as column in my table, like 01-OCT-12 | 02-OCT-12 | 03-OCT-12....
below is my code
create or replace
procedure MONTHLY_LVE_NEW_REPORT_demo
L_BUSINESS_UNIT IN SSHRMS_LEAVE_REQUEST_TRN.BUSINESS_UNIT%TYPE,
--L_LEAVE_TYPE_CODE IN SSHRMS_LEAVE_REQUEST_TRN.LEAVE_TYPE_CODE%TYPE,
L_DEPARTMENT_CODE IN VARCHAR2,
--L_MONTH IN SSHRMS_LEAVE_REQUEST_TRN.LVE_FROM_DATE%TYPE,
L_FROM_DATE IN SSHRMS_LEAVE_REQUEST_TRN.LVE_FROM_DATE%TYPE,
L_TO_DATE in SSHRMS_LEAVE_REQUEST_TRN.LVE_TO_DATE%type,
MONTHRPT_CURSOR OUT SYS_REFCURSOR
AS
O_MONTHRPT_CURSOR_RPT clob;
v_return_msg clob;
BEGIN
IF (L_BUSINESS_UNIT IS NOT NULL
AND L_FROM_DATE IS NOT NULL
and L_TO_DATE is not null
-- AND L_DEPARTMENT_CODE IS NOT NULL
THEN
OPEN MONTHRPT_CURSOR FOR
select EMPLOYEE_CODE, EMPLOYEE_NAME AS NAME, DEPARTMENT_CODE AS DEPARTMENT,DEPARTMENT_DESC, CREATED_DATE,
NVL(WM_CONCAT(CL_RANGE),'') as CL_TAKEN_DATE,
case when NVL(SUM(CL2),0)<0 then 0 else (NVL(SUM(CL2),0)) end as CL_BALANCE,
from
SELECT DISTINCT a.employee_code,
a.EMPLOYEE_FIRST_NAME || ' ' || a.EMPLOYEE_LAST_NAME as EMPLOYEE_NAME,
a.DEPARTMENT_CODE,
a.DEPARTMENT_DESC,
B.LEAVE_TYPE_CODE,
B.LVE_UNITS_APPLIED,
B.CREATED_DATE as CREATED_DATE,
DECODE(b.leave_type_code,'CL',SSHRMS_LVE_BUSINESSDAY(L_BUSINESS_UNIT,to_char(b.lve_from_date,'mm/dd/yyyy'), to_char(b.lve_to_date,'mm/dd/yyyy'))) CL_RANGE,
DECODE(B.LEAVE_TYPE_CODE,'CL',B.LVE_UNITS_APPLIED)CL1,
b.status
from SSHRMS_EMPLOYEE_DATA a
join
SSHRMS_LEAVE_BALANCE C
on a.EMPLOYEE_CODE = C.EMPLOYEE_CODE
and C.STATUS = 'Y'
left join
SSHRMS_LEAVE_REQUEST_TRN B
on
B.EMPLOYEE_CODE=C.EMPLOYEE_CODE
and c.EMPLOYEE_CODE = b.EMPLOYEE_CODE
and B.LEAVE_TYPE_CODE = C.LEAVE_TYPE_CODE
and B.STATUS in ('A','P','C')
and (B.LVE_FROM_DATE >= TO_DATE(L_FROM_DATE, 'DD/MON/RRRR')
and B.LVE_TO_DATE <= TO_DATE(L_TO_DATE, 'DD/MON/RRRR'))
join
SSHRMS_LEAVE_REQUEST_TRN D
on a.EMPLOYEE_CODE = D.EMPLOYEE_CODE
and D.LEAVE_TYPE_CODE in ('CL')
AND D.LEAVE_TYPE_CODE IS NOT NULL
group by EMPLOYEE_CODE, EMPLOYEE_NAME, DEPARTMENT_CODE, DEPARTMENT_DESC, CREATED_DATE
else
v_return_msg:='Field should not be empty';
end if;
END;
my code actual output
EMPLOYEE_CODE| Name | CL_TAKEN_DATE | CL_BALANCE
100001....................John............02-OCT-12.................6
100001....................chris...........01-OCT-12.................4
how to add column dynamically based on from_date to to_date?
Thanks and Regards,
Chris Jerome.

You cannot add columns dynamically. But you can define a maximum number of numbers and then hide unused columns in your form useing SET_ITEM_PROPERTY(..,VISIBLE, PROPERTY_FALSE);

How to add a frame dynamically in a jsp page.

Hai all,
In my application, in a particular jsp page i had the 3 links namely add.edit and delete. When click on add button, it is pointing to another jsp page where i can enter user details. But what i want now is when i click add button, the form in which we fill the user details should be added to the current page itself dynamically i.e., it should not go to another page when i click add button and that form should be displayed in the current page in a new frame dynamically.
The same should happen when i click n edit or delete options. everything should be diaplayed in the same page in different frames.
Can anyone suggest me about how to add a frame dynamically.

You create a frameset with two frames. One frame you give 100% of the rows and run the JSP in this frame. The other frame you give 0% of the row so that it is hidden. In the JSP you use a JavaScript funtion to submit the form. This function will call the parent frameset to reset the row values to 50%/50% which will make the bottom frame visible and then submit the form request with the bottom frame as teh target.
It is not so much as creating frames as using JavaScript to hide and display frames.

How to add Column to Adobe flex mx:DataGrid in mxml and/or actionsctpt?

I have simple mxml code
<mx:DataGrid id="DGG"
             editable="true">
    <mx:dataProvider>
        <mx:Object scheduledDate="4/1/2006"/>
    </mx:dataProvider>
</mx:DataGrid>
<mx:Button id="SetBut"
           label="Set Array as Data Provider"
           click="SetDP(); AddBut.visible = true;"
           x="100.5"
           y="164"
           width="211"/>
<mx:Button id="AddBut"
           label="Add a column!"
           click="AddCol();"
           x="100.5"
           y="194"
           width="211"
           visible="false"/>
<mx:Script>
    <![CDATA[
        import mx.controls.dataGridClasses.DataGridColumn;
        import mx.collections.ArrayCollection;
        [Bindable]
        public var MyAC:ArrayCollection=new ArrayCollection([{scheduledDate: "4/1/2006", homeTeam: "Chester Bucks"}]);
        public function SetDP():void
            DGG.dataProvider=MyAC
        public function AddCol():void
            MyAC.addItem({scheduledDate: "4/5/2007", homeTeam: "Long Valley Hitters", Umpire: "Amanda Hugenkis"});
            DGG.columns.push(new DataGridColumn("Umpire"));
    ]]>
</mx:Script>
I want to add rows to my table datagrid how to do such thing?
How to add Column to Adobe flex mx:DataGrid in mxml and/or actionsctpt?
(You can put this code in Flash or AIR app - it will compile with no errors, but will not add any columns=( )

Change this:
             public function SetDP():void
                DGG.dataProvider=MyAC
                MyAC.addItem({scheduledDate: "4/5/2007", homeTeam: "Long Valley Hitters", Umpire: "Amanda Hugenkis"});
            public function AddCol():void
                var dgc:DataGridColumn = new DataGridColumn("Umpire");
                var ca:Array = DGG.columns;
                ca.push(dgc);
                DGG.columns = ca;
Dany

How to add ComboBox to dynamically created DataGridColumn ?

hai friends,
help me, How to add ComboBox to dynamically created DataGridColumn

public function docfoldercurtainmanagerResult(event):void
if(event.result){
rightslistArray=event.result.RES2;
//Alert.show(event.fault.message);
<mx:DataGridColumn
headerText="Rights Level" minWidth="75" sortable="true" >
<mx:itemRenderer>
<fx:Component>
<mx:ComboBox dataProvider="{outerDocument.rightslistArray}" labelField="sec_rights_level" />
</fx:Component>
</mx:itemRenderer>
</mx:DataGridColumn>

How to add an extra dynamic columns in workflow inbox?

Hi Every Expert,
Transaction SWL1 only provides Six columns as dynamic columns for workflow inbox. But we need to use 7 to 8 dynamic columns. How to add these two extra columns into workflow inbox?
Thanks,
Shirley

Thank you very much for all you responses.
Due to SAP only provides 6 columns, I can't add anohter extra dynamic column. I may consider to change task to show the contents in preview pane.
Thanks again to everyone.
Shirley,

How to add columns for existing table dynamically?

Hi,
I created table structure only. I want to add columns for this existing table. Columns are not fixed, according to the user choice i need to write code.
Plz give me reply asap.
Thanks
Shirisha

Hi Shirisha,
I think the following code snippet will help you.
int l_no_cols = 0;
//Get the number of columns in this variable, something like the following
//l_no_cols = wdContext().currentContextElement().get<Context_attribute_name>;
IWDTable l_tab;
IWDTransparentContainer l_tbl_cont = (IWDTransparentContainer)view.getElement("TableDataCont");//ID of Container
l_tab = (IWDTable)view.getElement("TableData");//ID of Table
l_tab.setVisible(WDVisibility.VISIBLE);
l_tab.bindDataSource(wdContext.nodeTable_Data().getNodeInfo());
for(int a = 1; a <=l_no_cols; a++)
//Creating the column
IWDTableColumn l_tab_col = (IWDTableColumn)view.createElement(IWDTableColumn.class,"COL"+a);
//Creating Caption for Column Header
IWDCaption l_tab_cap = (IWDCaption)view.createElement(IWDCaption.class,"Caption"+a);
l_tab_cap.setText("Col"+i);
l_tab_col.setHeader(l_tab_cap);
//Creating Table Cell Editor for column
IWDInputField l_tab_cell = (IWDInputField)view.createElement(IWDInputField.class,"CellEditor"+a);
//creating context node attribute for the column dynamically
wdContext.nodeTable_Data().getNodeInfo().addAttribute("Col"+i,"com.sap.dictionary.String");
l_tab_cell.bindValue(wdContext.nodeTable_Data().getNodeInfo().getAttribute("Col"+i));
l_tab_col.setTableCellEditor(l_tab_cell);
l_tab.addColumn(l_tab_col);
l_tbl_cont.addChild(l_tab);
Regards,
Alka

How to add columns dynamically in a classical rep deending on a parameter

hi all,
i have a scenario where ii have to add columns in my report depending on a certain parameter.the report should dymnamically add the columns based on the parameter.

Hello Diego
Revert your logic and remove or do not display columns if the corresponding parameter is missing or does not have the expected value(s).
Using ALV lists you would accomplish this using the following coding:
IF ( <parameter is missing or has not expected value> ).
ls_fcat-tech = 'X'.
MODIFY gt_fcat FROM ls_fcat
TRANSPORTING tech
WHERE ( fieldname = <column> ).
ENDIF.
The column for which this attribute is set in the fieldcatalog will appear neither in the ALV list nor in the layout.
Now for a classical report (WRITE report ?!) you should develop a similar logic. You have to encapsulate the displaying or writing for each column and make this dependent from the parameter, e.g.:
LOOP AT gt_data INTO ls_data.
IF ( <parameter is missing or has not expected value> ).
" do nothing -> skip this column
ELSE.
PERFORM write_column USING ...
ENDIF.
ENDLOOP.
Regards
Uwe

How to add af:inputFile dynamically within each row of table?

I need to add af:inputfile dynamically within each row of af:table, when the user hits a commandlink at the bottom of each row.
I have tried wrapping af:inputfile with af:foreach:
<af:table value="Bean.rows" var="row">
<af:column>
<af:forEach step="1" begin="1"
end="#{Bean.filecount}">
<af:inputFile label="Please upload a file"
id="1"
valueChangeListener="#{Bean.onClickUpload}"/>
</af:forEach>
<af:commandLink text="Add more file" id="cl3" actionListener="#{Bean.onAddFile}"/>
</af:column>
</af:table>
in Bean.onAddFile, I have:
public void onAddFile(ActionEvent event){
filecount++;
It works but there's no independent control of each row. When I click one commandlink, All rows now have 2,3,.... af:inputFile. The change affects all rows.
The requirement should be that when I click one commandlink in a row, only that row shows additional af:inputFile.
So why not leverage the row variable of the table, right? That's what I did, I changed the end attribute of foreach to the following:
<af:forEach step="1" begin="1"
end="#{row.fileRowCount}">
the backing bean method changed to the following:
public void onAddFile(ActionEvent event){
int filerowcount = (Integer)JsfUtil.resolveExpression("#{row.fileRowCount}");
Integer newcount = filerowcount+1;
JsfUtil.setExpressionValue("#{row.fileRowCount}", newcount.toString());
Note that "row" refers to an object that has a int field called "filerowcount". And the initial value is "1".
Just for testing, I also added <af:outputText value="row.filerowcount"/>, to see if the count is what I expected it to be.
I didn't see the any af:inputfile this time, but the outtext is showing the filerowcount properly. When I click the commandlink, the number changed to 2,3,..... Also in the backing bean newcount and filerowcount is incrementing correctly.
I know the begin, end attribute means the index of a for loop. So I changed begin="0", it now shows one row of af:inputfile, but when I click the commandlink, no additional rows are shown. (Although the outputtext of filerowcount keeps incrementing as expected.
So to sum up, the END attribute of af:foreach row CAN pick up the value from the backing bean and render af:inputfile dynamically, but it CANNOT pick up the value from the the field in VAR object of a table.
Is is a known issue? Or I did something by mistake.
Is there any other way to add af:inputFile dynamically within each row of table?
Any advice/comment is appreciated.

Hi,
here is how it goes:
- add an af:inputFile to the column and set its rendered property to point to a managed bean property. The managed bean property has a default value of "false" and the bean should be in viewScope
- create another variable that holds the row number that should show the inputFile component. This is updated by the command link and evaluated by the get method of the managed bean property controlling the inputFile visibility
- Define a property name for the table varStatus property
- For the command link, define a attribute f:attribute with the name rowNumber and set its value to #{varStatusPropertyName.index}
- define an action listener for the command link
public void showInputFile(ActionEvent actionEvent){
int rowNumber = ((RichCommandLink) actionEvent.getSource()).getAttributes().get("varStatusPropertyName");
//set the value on the internal variable
- In the getter of the property that defines the render value of the inputFile, use code like this
public boolean get<whatever name you use>(){
//access the following EL from Java #{varStatusPropertyName.index}
int currentRenderedRow = <EL result here>;
// compare the current row index with the one set by the command link, which is stored in the variable of the managed bean
if true return true
else return false
- Set the PartialTriggers property of the table to point to the commandLink ID so the table is repainted when the command link is pressed
This should then render the fileInput component for a single row (the one you clicked the command link in)
Frank

How to add columns in field-symbol

Dear All,
Have made a report for HR - ZHR_CTC by using logical database and field-symbol. Report is working fine, but now have to add columns e.g business area text, positions text etc.
Have added columns in field-symbol.But not able to fetch data into that.
Data has to be fetched from different trasparent table comparing <field-symbol>-field.
Plz suggest the proper way to do it.
<<text removed>>
Regards,
Gulrez Alam
Edited by: Gulrez Alam on Dec 16, 2008 11:02 AM
Edited by: Matt on Dec 16, 2008 11:36 AM

Hi Rimpa,
Thanks a lot for you reply, have tried ur suggestion but it's not working. I am not able to understand how to insert data into field-symbol. Plz give some more clarifications about the same.
Regards,
Gulrez Alam

How to add column access BADI to appraisal template.

I am not able to see option to add column access BADI in template at Processing tab--> Further template behaviour.
Kinldy let me know how to add it.
I am able to see only following options
BC         Business Check
D1         Default Appraiser
D2         Default Appraisee
DE         Default Execution Period
DN         Default Appraisal Document Name
DP         Default Part Appraiser
DR         Default Review Date
DV         Default Validity Period
HA         Header Data Change
PM         Maximum Number of Part Appraisers
Thanks in advance.
Dhananjy

Hello Ravikiran,
Based on the Role and Status of the appraisal form, turn the Column On/Off/Hide..
sample code...
case s_header_status-ap_status.
          when c_status_in_preparation.
            availability = 'H'.
            column_owner   = space.
          when c_status_in_planning.
            case s_body_columns-column_id.
              when 'OBJ0'.
                availability   = 'X'.
                column_owner   = 'X'.
                exit.
              when 'Z003'.
                availability   = 'X'.
                column_owner   = 'X'.
Hope it helps...
Regards,
Jothi.P

How to add columns for wad in web apllication designer

hi,
can any one tell me how to add new columns for analysis item in wad.
i found an option of adding new rows but not able to find a option of new columns in analysis item.
please suggest me.
i will assign points

Hi,
There is no functionlaity to add new columns.
For adding new combinations to the transaction data, the input ready new rows are used. Why do you need new columns?

How to add LOV Data dynamically

Hi Experts,
Working in JDEV 11.1.1.3.0
I have a requirement as need to add LOV values dynamically.
I have Button to add rows in the table(transient VO), table as 2 columns one is value and another one is description, this description is lov(InputListOfValues -- Another Transient VO).
This ListValues are dynamic, i need to get these values from Webservice call, this i have already written which is working fine.
Now My requirement is the LOV should be get values dynamically for each corresponding value in the row.
For this in add method, Added data to the LOV TransientVO, but when i click on inputComboLOV symbol, i am not getting any values, i put debugger values are setting to the transient VO,
but when i click on lov symbol i am not getting proper values.
Is there way to implement this requirment, can any one suggest me.
Can we make transient VO as LOV VO?
Edited by: user642703 on May 10, 2012 2:45 PM

Hi,
I think what you need to do is to access the Web Services from a programmatic view obeject to build a model driven LOV. If you did this then have a look here: http://www.oracle.com/technetwork/developer-tools/adf/learnmore/89-adfbc-lov-switcher-454168.pdf
Frank

How to add column comments to table

at the time of creating the table, how to add the comments t columns.

Hi,
I do not see any way in which you can add comment on column while issuing create table command. You can add comment on the column only after the table is created.
Regards
Anurag Tibrewal.

How to add column to compressed table

Hi gurus,
Can any one help me how to add a column to compressed tables
Thanks in advance

The only difference is if added column has default value. In that case:
SQL> create table tbl(id number,val varchar2(10))
2 /
Table created.
SQL> insert into tbl
2 select level,lpad('X',10,'X')
3 from dual
4 connect by level <= 100000
5 /
100000 rows created.
SQL> select bytes
2 from user_segments
3 where segment_name = 'TBL'
4 /
     BYTES
   3145728
SQL> alter table tbl move compress
2 /
Table altered.
SQL> select bytes
2 from user_segments
3 where segment_name = 'TBL'
4 /
     BYTES
   2097152
SQL> alter table tbl add name varchar2(5) default 'NONE'
2 /
alter table tbl add name varchar2(5) default 'NONE'
ERROR at line 1:
ORA-39726: unsupported add/drop column operation on compressed tables
SQL> alter table tbl add name varchar2(5)
2 /
Table altered.
SQL> update tbl set name = 'NONE'
2 /
100000 rows updated.
SQL> commit
2 /
Commit complete.
SQL> select bytes
2 from user_segments
3 where segment_name = 'TBL'
4 /
     BYTES
   7340032
SQL> select compression from user_tables where table_name = 'TBL'
2 /
COMPRESS
ENABLED
SQL> alter table tbl move compress
2 /
Table altered.
SQL> select bytes
2 from user_segments
3 where segment_name = 'TBL'
4 /
     BYTES
   2097152
SQL> SY.

How to add column in Dynamic VO

Similar Messages

Maybe you are looking for