How to add customize item in Report & analytics
Hi,
I have created a new RISK ANALYSIS REPORT in web dynpro application.
Now my requirement is, to add the same under Access Risk Analysis Report.
Can someone help me how I can achieve it?
Is there any configuration exist for the same?
Regards.
Praveer.
Hi Praveen,
This can be achieved by customizing your launchpad.
LPD_CUST tcode can be used for this. You can add this report under Access Risk Report Tab.
How to create a new launchpad in NWBC - Governance, Risk and Compliance - SCN Wiki
Thanks,
Mamoon
Similar Messages
-
R12: How to filter Open Item Revaluation Report based on GL Date
Hi,
Anybody know how to filter Open Item Revaluation Report based on GL Date from and GL Date to in R12?
Since we just upgraded from 11.5.10 to 12.1.3 and found we cannot filter those report for specific date. It shown all data included the old data from 8 years ago also.
We need to run the report only for specific date only. Please share with me if anyone know about this.
Thanks.Pl do not post duplicates - R12: How to filter Open Item Revaluation Report based on GL Date
-
Urjent-how to add line items in tcode-FBL3N
Hi Experts,
How to add line items customer, customer name, vendor and vendor name in FBL3N.
Thanks in advance.
mahe
Moderator message - Please do not use words like "urjent". Please ask a specific question. Please search the forum. This question has been asked and answered before. Post locked
Edited by: Rob Burbank on Apr 29, 2009 11:27 AM
Edited by: Rob Burbank on Apr 29, 2009 11:28 AMHi,
Check the BTE's:
00001020 POST DOCUMENT: Prior to final checks SAMPLE_INTERFACE_00001020
00001025 POST DOCUMENT: Final checks completed SAMPLE_INTERFACE_00001025
00001030 POST DOCUMENT: Posting of standard data SAMPLE_INTERFACE_00001030
00001050 POST DOCUMENT: Accounting interface SAMPLE_INTERFACE_00001050
Thanks & Regards,
Harish -
How to add Excise item with out chapter id
Dear all,
How to add Excise item with out chapter id?
Chapter id of purchae items will be known only after receiving Invoice/gate pass/delivery chalan from supplier/vendor
To send a purchase order we need to create that particular item in the master, but with out assigning chapter id system is not allowing to save without chapter id.
How to solve this?
I am with SAP 8.8 and PL 10
Thanks in advance
regards,
KumarHi Kumar,
Refer the book of chapter ID or find out on internet you will get the chapter ID.
Still if you not able to get the chapter id then consult with excise advisory.
But you can add Excise PO until you have the excise details in Item master.
Regards,
Datta Kharat -
How to add an item into the Newsstand
How to add an item into the Newsstand. Please do NOT reply using "tech-language." Use standard- normal everyday English. Thanks,
Don Otlin
Franklin Square, NYOpen Newsstand. Tap on the "Store" button in the upper right. Any newspaper or magazine you download from the store will appear in Newsstand.
-
How to add new item in more options dialog box
Hi all,
Can anyone tell me how to add new item in more options dialog box(site actions -> more options). I want to add new item there to the new page layout which I created but I didn't find any way to do it. can anyone assist me for this.Good point, in order to add a Page into that area, you will need to define a Custom Action. You can learn more about creating Custom Actions here:
http://msdn.microsoft.com/en-us/library/hh500259(v=office.14).aspx
As an example, Microsoft uses the following Custom Action to add the "Publishing Page" to that Create Silverlight control when enabling the Publishing features:
<CustomAction
Id="CreatePublishingPage"
GroupId="WebPages"
Location="Microsoft.SharePoint.Create"
Sequence="100"
Title="$Resources:cmscore,Create_WebPages_PublishedPage;"
Description="$Resources:cmscore,Create_WebPages_PublishedPage_Description;"
ImageUrl="/_layouts/images/ltpp.png">
<UrlAction Url="_Layouts/CreatePage.aspx" />
</CustomAction>
Dimitri Ayrapetov (MCSE: SharePoint) -
How to add filter in Bex report
hi how to add filter in BEx report and what is the difference between filter and free charcteristics.
Regards,
Viren.Hi Viren,
difference between filter and free characteristics is that free characteristics can be added to drilldown at query runtime. Filter values can not be changed at query runtime.
You can add a filter to a query by placing a characteristic in filter section and restrict the characteristic to certain values. Characteristics in rows / columns / free characteristics section can be restricted to certain values, too.
Best regards,
Björn -
Hi,
How To add Logo in ALV Report?
I need step by step explanation.Hi uday,
go through this hope u can understand.
*&amp; Report Z_OOALV_LOGO
*&--Sample Program using ooalv-> by SrikanthV--
REPORT z_ooalv_logo.
****DECLARATION FOR LOGO INSERT
CONSTANTS: cntl_true TYPE i VALUE 1,
cntl_false TYPE i VALUE 0.
DATA:h_picture TYPE REF TO cl_gui_picture,
h_pic_container TYPE REF TO cl_gui_custom_container.
DATA: graphic_url(255),
graphic_refresh(1),
g_result LIKE cntl_true.
DATA: BEGIN OF graphic_table OCCURS 0,
line(255) TYPE x,
END OF graphic_table.
DATA: graphic_size TYPE i.
CALL SCREEN 100.
*&----
*& Module PICTURE OUTPUT
text
MODULE picture OUTPUT.
DATA: l_graphic_xstr TYPE xstring,
l_graphic_conv TYPE i,
l_graphic_offs TYPE i.
CALL METHOD cl_ssf_xsf_utilities=>get_bds_graphic_as_bmp
EXPORTING
p_object = 'GRAPHICS'
p_name = 'EDS'"IMAGE NAME - Image name from SE78
p_id = 'BMAP'
p_btype = 'BCOL'
RECEIVING
p_bmp = l_graphic_xstr
EXCEPTIONS
not_found = 1
OTHERS = 2.
graphic_size = XSTRLEN( l_graphic_xstr ).
CHECK graphic_size > 0.
l_graphic_conv = graphic_size.
l_graphic_offs = 0.
WHILE l_graphic_conv > 255.
graphic_table-line = l_graphic_xstr+l_graphic_offs(255).
APPEND graphic_table.
l_graphic_offs = l_graphic_offs + 255.
l_graphic_conv = l_graphic_conv - 255.
ENDWHILE.
graphic_table-line = l_graphic_xstr+l_graphic_offs(l_graphic_conv).
APPEND graphic_table.
CALL FUNCTION 'DP_CREATE_URL'
EXPORTING
type = 'image'
subtype = cndp_sap_tab_unknown " 'X-UNKNOWN'
size = graphic_size
lifetime = cndp_lifetime_transaction "'T'
TABLES
data = graphic_table
CHANGING
url = graphic_url
EXCEPTIONS
dp_invalid_parameter = 1
dp_error_put_table = 2
dp_error_general = 3
OTHERS = 4 .
IF sy-subrc <> 0.
MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
EXIT.
ENDIF.
CREATE OBJECT h_pic_container
EXPORTING container_name = 'LOGO'.
CREATE OBJECT h_picture EXPORTING parent = h_pic_container.
CALL METHOD h_picture->load_picture_from_url
EXPORTING
url = graphic_url
IMPORTING
RESULT = g_result.
ENDMODULE. " PICTURE OUTPUT
Reward points if helpful.
Thanks -
Need detailed procedure on how to add an item with Item Style Check Box in
Need detailed procedure on how to add an item with Item Style Check Box in Framework.
The view instance should be the same as the view instance (view object) specified for your region.
If the View Attribute already that you need already exists in the View Object then you can use it.
Otherwise you have to extend the View Object and add the new attribute to it.
--Prasanna -
How to add a item to shopping cart in iProcurement by java codes.
I have encountered a problem in the development of iProcurement, I don't know how to add a item into the shopping cart. Please help me.
This is the Configurator forum, your question is probably better posed in the Procurement forum (Procurement
-
How to add customize columns to update logic of vanilla etl code
Hi Experts,
How to add customize columns to update logic of vanilla etl code.
example we added a column and passes through custom expression and passed to target it worked fine for full load.
but when the code move to QA we found defect that some of the data is not loaded. we are unable to get the updated data for customize columns.(not incremental load using DAC)
In documnet it was mentioned to add to update logic port. can any one help us in this issue.
Thanks
NareshYou now that you need to ask BI Apps related questions on this forum: Business Intelligence Applications because I see the same question here: How to add customize columns to update logic of vanilla etl code
This kind of cross-posting isn't correct forum behavior.
Regards,
Stijn -
How to add push button in report.
Hi,
how to add a push button in the standard list report and on clicking which the line-size of the screen should reduce from 300 to 100.
how to proceed.
Can anyone help me.
Regards
GuhapriyanHii Guhapriyam,
You can ceate PUSHBUTTON in selection-screen like Below
SELECTION-SCREEN PUSHBUTTON 2(10) text-004 USER-COMMAND CL1.
Create a variable to hold the processed PUSHBUTTON value like
DATA v_flag TYPE flag.
The PUSHBUTTON will be processed at the event AT SELECTION-SCREEN. So write your code like below
AT SELECTION-SCREEN.
IF sy-ucomm EQ 'CL1'.
v_flag = 1. "Buttob clicked
ENDIF.
START-OF-SELECTION.
IF v_flag EQ 1.
NEW-PAGE LINE-SIZE 100.
ENDIF.
OR
The best way of doing this by setting PF-STATUS like
START-OF-SELCTION.
SET PF-STATUS 'ZSTATUS'. "Double click on this and set the pushButton in standard toolbar option and in function key specify the BACK, EXIT and CANCEL button .
Then write your logic at the event AT USER-COMMAND.
AT USER-COMMAND.
CASE sy-ucomm.
WHEN 'RED'.
NEW-PAGE LINE-SIZE 100.
WHEN 'BACK' OR 'CANCEL' OR 'EXIT'.
LEAVE SCREEN.
WHEN OTHERS.
ENDCASE.
regards
Syed -
How to add new fields in report painter without library
Hi,.
I have to add new fields in report painter(std one) which is not in any library and so I am not able to add the fields in characteristics. Though I have added zfields in CCR1S but I am not able to add these fileds in characteristics in report painter(say - CJe3 t-code)
How to procedd for this.
Thanks,
MOhanhi,
first i copied the report 12KST1G in my Y12KST1G with form. In CJE2 when i Click this report then in the whatever fields coming in the characteristics we can put it in 'variables' tab and these will be the fields which is displayed on the selecton screen. So after doing the wbove changes in the exit , I am not able to get the fields in characteristics vale so that I can put it in variable. or do we have to do some chnages in the screen for this z report which is like std. one.
FYI..The display of the fields was done in z-report with library but this is like a report without library and we did some chnages in the exit.
Pls Suggest -
How to add new column in report painter
Hi Experts,
I want to add new column in report painter which as to calculate the previous column . value in the new column should be the precentage of previous column existing on left side...HI Pradeep,
Goto the transaction code (Change Report) GR32.
Give you library name and report name
And click on the column (application tool bar or F7) button then place the curser on the screen where you want column (please note you have to keep curser on the header section u2013Red column text) right click and insert element. Then you select formula as selection element and enter. You will get the enter formula box. Then you can type your formula and continue. This will add new column to the report.
How to enter formula: you can see the formula components in that id and description.
Id is columns that are present and description indicates explanation of that column.
Enter formula according your requirement.
Examples:
Enter formula screen:
ID : des
X001 amount
X002 pt000
X003 test
1. Enter formula as: ( X001 u2013 X002)
The above formula is for fist column u2013 second column.
2. ( ( X001 u2013 X002) / X003) * 100
First column u2013 second column and devide by third column after that multiple with 100.
Hope this will help you
Regards
Manohar -
GRCT HOW TO ADD Z TABLES IN REPORT PAINTER
Hi Gurus
Could you please send me information about how to activate z tables in report painter ? someone said me that i can user transaction GRCT to do that...¿ what aspects must I consider to add a table ?
mail: [email protected]
Regards
Andrés Morenohi Andres,
below are the steps for the Report Painter.....
Create a new report.
Menu Path: Information Systems > Ad hoc reports > Report Painter > Report > Create
On the Report Painter: Create Report screen, enter:
Library 1VK
Report RSS-A
Report Description Report w/Total Row
Hit <Create> button to move to the next screen.
Create the Rows of the Report The first four rows are cost element characteristics
Screen: Report Painter: Create Report
Type Cost Elements in the lead column cell
Double click on Row 1
In the Pop-up window 'Element definition: Row1", enter:
Note: If Pop-up window (select element type) appears, choose 'characteristics' and hit <Enter>.
Select 'Cost Element' as the characteristic in the 'Available characteristics' section
Hit <Move selected to left> button to move the characteristic 'Cost element' to the 'Selected characteristics' section
From 430000
Hit <Change short, middle and long texts> icon (at the bottom of the window)
In the Pop-up for Enter Texts, Enter:
Short Description from Table above for this Account
Click on the <Copy short text> button to copy this description to the other fields.
Hit <Confirm> to close the Pop-up
Hit <Confirm/Enter> to check consistency and close.
Repeat the above steps for the other 3 accounts
Create a formula row to calculate the total of the Cost Element rows
Screen: Report Painter: Create Report
Double click on Row 5 or the next empty row.
In the Pop-up for Select Element Type select 'Formula'
Hit <Enter> to close the Pop-up
In the Pop-up 'Enter Formula'
Use the calculator buttons to create the formula Y001 + Y002 + Y003 + Y004
Hit <Enter> to close the Pop-up
In the Pop-up 'Enter Texts'
Short Total
Click on the <Copy short text> button to copy this description to the other fields.
Hit <Enter> to close the Pop-up
Make sure your cursor is in the cell containing the word Total
Follow the Menu Path: Formatting > Row
In the Pop-up 'Row Formatting'
Overscore checked
Underscore checked
Hit <Enter> to close the Pop-up
Create the first column for actual costs
Screen: Report Painter: Create Report
Double click on the Column 1 cell.
In the Pop-up 'Select element type'
Select Predefined Key Figure radio button, and press <Enter>.
In Pop-up 'Choose predefined column'
Select Actual Costs as the predefined column, and press <Enter>.
In the Pop-up 'Element definition: Actual costs'
Press <Confirm> to check consistency and close.
Define the second column for plan costs
Screen: Report Painter: Create Report
Double click on the Column 2 cell.
In the Pop-up 'Select element type'
Select Key Figure with Characteristics as the element type, and press <Enter>.
In the Pop-up 'Element definition: Column 2'
Value Type 01 (Plan)
Version 0 (Actuals)
Valuation 0 (Legal valuation)
Hit <Change short, middle and long texts> icon
In the Pop-up for Enter Texts, Enter:
Short Plan
Click on the <Copy short text> button to copy this description to the other fields.
Hit <Confirm> to close Pop-up.
Hit <Confirm> to check consistency and close.
Create a formula column to calculate the variance between actual and plan costs
Screen: Report Painter: Create Report
Double click on the Column 3 cell
Assign the points....
Ranjit
Maybe you are looking for
-
I just downloaded a song and it only plays the first 50 seconds and then moves to the next song in the list. How can I get it to play the rest of the song?
-
Using PSD files . . . HELP
I have a psd file with a transparent background. I have built it video template and pixel correction in photoshop. I need to know how to use it. I place it in the timeline. If i select it I then get a additional tab in the timeling for just that imag
-
IPhone 2.2: How does one access street view?
At my old age maybe I am just losing it. Can't figure out how to access the street view in Maps after updating to 2.2. I see no obvious option to go to that view from the Maps app. Help! Ken
-
Passing Url dynamically in WEB SERVICE Action block
Hi All below is my requirement, kindly help We have three environments 1. Development 2. Testing 3.Production In one of the BLS i have used Web Service Action block by putting the web service url. Whenever the BLS is moved from Testing environment or
-
Can anyone recommend an app for downloading bank statements (.csv/.qif) directly on to my iPad that will allow me to analyse my money flow....no account management needed. I just need something v simple that can take my statement and produce graphs e