How to add default value to the Exclude single value in selection screen..

Hi Experts,
i have searched in sdn, but not able to get proper results,
in my report i have a selection screen, in that there is a Select-option like status, for this status i need to exclude '02'
for this i need to add the default value under exclude singale values option, not in lower and upper limit.
can anyone help me...
Regards,
Sudha.
Moderator message: please search for available information/documentation before asking, don't just claim you did.
Edited by: Thomas Zloch on Oct 27, 2010 2:50 PM

Hi,
you can use the function module SELECT_OPTIONS_RESTRICT .
This function module simplifies the handling of SELECT-OPTIONS on the selection screen by restricting possible selection options and signs.
By calling this function module, you can restrict the number of selectio options available for the chosen selection field. You can also disable the function allowing users to enter values to be excluded from the selection (SIGN = 'E').
Regards,
S.Velsankar

Similar Messages

How to add user defined functions in Menu bar of a Selection Screen?

Hi,
Can anybody please suggest me that how can I add user defined functions in the menu bar of a Selection Screen?
Regards
s@k

Dear Amit,
I am referring to the standard SAP program: RIEQUI20.
On the initial screen, there are 3 tabs.
Code:
SELECTION-SCREEN BEGIN OF TABBED BLOCK tab FOR 25 LINES.
SELECTION-SCREEN TAB (20) tab1 USER-COMMAND ucomm1
                     DEFAULT SCREEN 001.
SELECTION-SCREEN TAB (20) tab2 USER-COMMAND ucomm2
                     DEFAULT SCREEN 002.
SELECTION-SCREEN TAB (20) tab3 USER-COMMAND ucomm2
                     DEFAULT SCREEN 003.
SELECTION-SCREEN END OF BLOCK tab.
AT SELECTION-SCREEN.
CLEAR gv_okcode.
gv_okcode = sy-ucomm.
CLEAR sy-ucomm.
CASE gv_okcode.
    WHEN 'IH08'.
      CALL TRANSACTION 'IH08'. "Equipment Selection
    WHEN 'IW29'.
      CALL TRANSACTION 'IW29'. "Notification Selection
    WHEN 'IW39'.
      CALL TRANSACTION 'IW39'. "Order List Selection
    WHEN OTHERS.
ENDCASE.
*   Check date:
IF NOT datuv IS INITIAL
AND NOT datub IS INITIAL.
    IF datub >= datuv.
    ELSE.
      MESSAGE e884(ih) WITH datuv datub.
    ENDIF.
ENDIF.
IF variant IS INITIAL AND
     dy_vari IS INITIAL.
    PERFORM get_default_variant_f14 USING variant.
ENDIF.
PERFORM variant_existence_f14 USING variant.
IF datuv IS INITIAL.
    datuv = sy-datum.
ENDIF.
IF datub IS INITIAL.
    datub = sy-datum.
ENDIF.
IF sy-ucomm = 'ADDR'.
    PERFORM adress_sel_f01 USING 'EQUIR'.
ENDIF.
PERFORM check_parnr_f76.
* AT SELECTION SCREEN OUTPUT
AT SELECTION-SCREEN OUTPUT.
STATICS: l_slset TYPE sy-slset.
*--- Set initial variant
PERFORM variant_init_f14 USING 'INST' 'INST' 'INST' 'RIEQUI20'.
IF variant IS INITIAL AND
     dy_vari IS INITIAL AND
    gv_variant_flag IS INITIAL.
    PERFORM get_default_variant_f14 USING variant.
    gv_variant_flag = 'X'.
ENDIF.
*--- Set Icon for adress-button
PERFORM set_icon_f01 USING dy_adrfl ad_icon text-ad0 text-ad1.
*--- get classification data from select option
*--- (if new variant or if called via submit or F3)
IF ( l_slset NE sy-slset ) OR
     ( s_comw[] IS NOT INITIAL AND gt_clsd_comw[] IS INITIAL ).
    l_slset = sy-slset.
    gv_class_old = dy_class.
    gv_klart_old = dy_klart.
    PERFORM copy_selopt_comw_f79 TABLES gt_clsd_comw s_comw.
    PERFORM class_search_init_f77 USING 'EQUI'.
ENDIF.
*--- set Icon for classification
LOOP AT gt_clsd_comw TRANSPORTING NO FIELDS
                      WHERE atcod > '0'.
    EXIT.
ENDLOOP.
IF sy-subrc IS INITIAL.
    gv_comw_flag = 'X'.
ELSE.
    CLEAR gv_comw_flag.
ENDIF.
PERFORM set_icon_f01 USING gv_comw_flag cl_icon text-cl0 text-cl1.
CALL METHOD cl_uid_cust=>selection_screen_output.
AT SELECTION-SCREEN ON VALUE-REQUEST FOR variant.
PERFORM variant_inputhelp_f14 USING variant 'RIEQUI20'.
AT SELECTION-SCREEN ON VALUE-REQUEST FOR dy_parnr.
PERFORM f4_for_parnr_f76.
AT SELECTION-SCREEN ON BLOCK clse.
IF dy_class NE gv_class_old
    OR dy_klart NE gv_klart_old.
    gv_class_old = dy_class.
    gv_klart_old = dy_klart.
    CLEAR gv_comw_flag.
    REFRESH gt_clsd_comw.
    REFRESH s_comw.
ENDIF.
PERFORM class_exist_f77 USING dy_klart dy_class 'DY_CLASS'.
IF sy-ucomm = 'COMW'.
    CALL FUNCTION 'IHCLSD_VALUATION_POPUP'
      EXPORTING
        i_klart               = dy_klart
        i_class               = dy_class
        i_language            = sy-langu
        i_key_date            = sy-datum
        i_also_subclasses     = dy_subcl
      TABLES
        ct_comw               = gt_clsd_comw
      EXCEPTIONS
        exc_no_class          = 1
        exc_klart_not_allowed = 2.
    IF sy-subrc <> 0.
      MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
        WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
    ENDIF.
*--- fill classification data in select option
    PERFORM copy_comw_selopt_f79 TABLES gt_clsd_comw s_comw.
ENDIF.
IF sy-ucomm = 'ONLI'.
    sscrfields-ucomm = sy-ucomm.
ENDIF.
Regards
s@k
Edited by: siemens.a.k on Jan 15, 2010 10:10 AM

Index of Values in the List Boxes on a Selection Screen

Hi,
I have a list box on the selection screen for Month field. It has the values Jan, Feb, Mar....etc in it.
These entries, I added thru the VRM_SET_VALUES.
Now, I want to default the month to current month SY-DATUM+4(2).
Is there any FM to which I can send this SY-DATUM+4(2) as an Index and the corresponding value gets set for the Month field.
As an alternatvie, I could use<b> Case Sy-DATUM+4(2). when '01'. p_month = 'Jan'. etc etc..</b> But I want to avoid this big case statement.
Please suggest.
Thanks,
Suryakiran D.

Hi Suryakiran,
Try to use the func <b>MONTH_NAMES_GET</b>.It will
return the month name along with the number.
And also you can directly select from table <b>T247</b>
Thanks&Regards,
Siri.
Message was edited by: Srilatha T

How to add an icon to the dock in the macbookpro

i am using macbook pro, i accidentl removed the launchpad ison from the dock, how to add it back to the dock

Go to finder/applications
select launchpad
and drag it back to the dock

How to add F4 help for the custom field of a custom table

Hi All,
How to add F4 help to the custom table field? in the table maintainance when user clicks on F4 i want to provide possible values for this field I am trying to write the code in the screen of table maintainace like the following
PROCESS ON VALUE-REQUEST.
FIELD ZTEST_MAH_F4-KUNNR MODULE zVALUE_kunnr .
But when i am double clicking on module it's giving options to create include program but after that it's giving user is currently editing the table i am not getting this can some body clarify my doubt it's gr8 if some body give some examp code
Thanks&Regards
mahesh

Hi,
Create a subroutine under the event and call the following FM
1. Select all the related data into an itab, for ex i_kunnr
2.    CALL FUNCTION 'F4IF_INT_TABLE_VALUE_REQUEST'
      EXPORTING
    DDIC_STRUCTURE         = ' '
       retfield               = 'KUNNR'
    PVALKEY                = ' '
       dynpprog               = sy-repid
       dynpnr                 = '1000'
       dynprofield            = <selection screen field>
    STEPL                  = 0
    WINDOW_TITLE           =
    VALUE                  = ' '
       value_org              = 'S'
    MULTIPLE_CHOICE        = ' '
    DISPLAY                = ' '
    CALLBACK_PROGRAM       = ' '
    CALLBACK_FORM          = ' '
    MARK_TAB               =
IMPORTING
    USER_RESET             =
      TABLES
       value_tab              = <b>i_kunnr</b>
    FIELD_TAB              =
       return_tab             = < return table >
    DYNPFLD_MAPPING        =
     EXCEPTIONS
       parameter_error        = 1
       no_values_found        = 2
       OTHERS                 = 3

How to add a report into the SAP-SCRIPT .using PERFORM ......ENDPERFORM

My question is that How to add a report into the SAP-SCRIPT .
by using PERFORM ......ENDPERFORM
I don't know how to used it .

Hi Sandeep,
Please check this link
http://help.sap.com/saphelp_40b/helpdata/en/d1/803279454211d189710000e8322d00/content.htm
http://www.allinterview.com/showanswers/37425.html
Calling ABAP Subroutines: PERFORM
You can use the PERFORM command to call an ABAP subroutine (form) from any program, subject to the normal ABAP runtime authorization checking. You can use such calls to subroutines for carrying out calculations, for obtaining data from the database that is needed at display or print time, for formatting data, and so on.
PERFORM commands, like all control commands, are executed when a document is formatted for display or printing. Communication between a subroutine that you call and the document is by way of symbols whose values are set in the subroutine.
Syntax in a form window:
/: PERFORM <form> IN PROGRAM <prog>
/: USING &INVAR1&
/: USING &INVAR2&
/: CHANGING &OUTVAR1&
/: CHANGING &OUTVAR2&
/: ENDPERFORM
INVAR1 and INVAR2 are variable symbols and may be of any of the four SAPscript symbol types.
OUTVAR1 and OUTVAR2 are local text symbols and must therefore be character strings.
The ABAP subroutine called via the command line stated above must be defined in the ABAP report prog as follows:
FORM <form> TABLES IN_TAB STRUCTURE ITCSY
OUT_TAB STRUCTURE ITCSY.
ENDFORM.
The values of the SAPscript symbols passed with /: USING... are now stored in the internal table IN_TAB . Note that the system passes the values as character string to the subroutine, since the field Feld VALUE in structure ITCSY has the domain TDSYMVALUE (CHAR 80). See the example below on how to access the variables.
The internal table OUT_TAB contains names and values of the CHANGING parameters in the PERFORM statement. These parameters are local text symbols, that is, character fields. See the example below on how to return the variables within the subroutine.
From within a SAPscript form, a subroutine GET_BARCODE in the ABAP program QCJPERFO is called. Then the simple barcode contained there (u2018First pageu2019, u2018Next pageu2019, u2018Last pageu2019) is printed as local variable symbol.
Definition in the SAPscript form:
/: PERFORM GET_BARCODE IN PROGRAM QCJPERFO
/: USING &PAGE&
/: USING &NEXTPAGE&
/: CHANGING &BARCODE&
/: ENDPERFORM
/ &BARCODE&
Coding of the calling ABAP program:
REPORT QCJPERFO.
FORM GET_BARCODE TABLES IN_PAR STUCTURE ITCSY
OUT_PAR STRUCTURE ITCSY.
DATA: PAGNUM LIKE SY-TABIX, "page number
NEXTPAGE LIKE SY-TABIX. "number of next page
READ TABLE IN_PAR WITH KEY u2018PAGEu2019.
CHECK SY-SUBRC = 0.
PAGNUM = IN_PAR-VALUE.
READ TABLE IN_PAR WITH KEY u2018NEXTPAGEu2019.
CHECK SY-SUBRC = 0.
NEXTPAGE = IN_PAR-VALUE.
READ TABLE IN_PAR WITH KEY u2018BARCODEu2019.
CHECK SY-SUBRC = 0.
IF PAGNUM = 1.
OUT_PAR-VALUE = u2018|u2019. "First page
ELSE.
OUT_PAR-VALUE = u2018||u2019. "Next page
ENDIF.
IF NEXTPAGE = 0.
OUT_PAR-VALUE+2 = u2018Lu2019. "Flag: last page
ENDIF.
MODIFY OUT_PAR INDEX SY-TABIX.
ENDFORM.
Best regards,
raam

How to Add IBAN Field in the Bank Details Infotype?

Hello All,
I need to know the procedure for How to add IBAN field in the bank details infotype?
Could anyone help me please.
I m new to SAP HR.
Immediate help will be appreciated.
Thanks.
Regards,
Mudassir.Imtiaz

Hi mudassir,
For IBAN implementation:
1. Implement SAP Notes 925410, 1409674, 1405521
2. Go to t-code FIBF - From menu select Settings - P/S Modules - of an SAP Application - Create entry
For Turkey we've added the following entry (depends on country) :
00003040 TR CONVERT_IBAN_2_BANK_ACCOUNT_TR
3. Go to V_T588M for module pool MP000900 and screen 2000 select IBAN & Q0009-IBAN00 fields as standard.
4. Go to table T77S0 and make value of ADMIN IBAN entry S.
Regards,
Dilek

How To keep CNiKnob from going directly from the Min axis value to the Max axis value?

When a user drags the pointer on a CNiKnob with the mouse, he/she is able to drag the pointer directly from the minimum axis value to the maximum axis value.
This is obviously unacceptable. So is there a way to disable this behavior or a work around?

Unfortunately, there is not an easy way to do this with CNiKnob. One way you could work around it would be to handle the CNiKnob's OnPointValueChanged event and keep track of the previous value, then detect if the value jumps from the min to the max or vice versa and if it does, set it back.
If you migrate to .NET in the future, the Measurement Studio Windows Forms .NET Knob control lets you easily configure this and is the default behavior when you add a Knob to your form. For more info, see the documentation for the Knob.InteractionMode property.
- Elton

How to add 2 rows in the form layout?

In the detail page,form layout only one row pick up from database and it displays please anyone have idea about how to display 2 rows or 3 rows in a page?
how to add 2 rows in the form layout?
It's very urgent
Thanks in advance

No. You can only achieve this with smart custom templates. Here is sample code which will display multiple employees in form layout:
<af:forEach items="#{bindings.EmployeesTable.rangeSet}" var="row">
<af:panelForm rows="1" maxColumns="2" width="10%" id="RegionsFormItems">
<af:inputText id="EmployeesEmployeeId" value="#{row.LastName}" label="EmployeeId" .... />
<af:selectInputDate id="EmployeesHireDate" value="#{row.HireDate}" label="HireDate" ...... >
<af:convertDateTime pattern="#{nls.datepattern}"/>
</af:selectInputDate>
</af:panelForm>
</af:forEach>
Steven Davelaar,
JHeadstart Team.

How to add a page in the SAP Scripts

Hi All,
I want to know how to add a page in the sap scripts. there is already sap script developed by some other person.
Now I have to add a page in front of that and have to add some more data.I added a page in page windows but thats not at all working.
Please help me out in this.
Thanks,
Praveen

new page will create in sap scripts using new page command.
you have to set condition like after some number of records displayed in page new page has to be trigger.
ex:YOU HAVE SO MANY RECORDS FOR PRINTING BUT YOU WANT TO DISPLAY 100 RECORDS IN FIRST PAGE REMAINING IN SECOND PAGE LIKE THAT.
Here you can use NEW PAGE COMMAND .
IT IS OPPOSITE PURPOSE OF PROTECT AND ENDPOTECT.
Reward if useful.

How to add log messages in the sever/webui objects?

Hi,
I am new to the OA Framework.
Can any one share any information in how to add log messages in the sever/webui objects?
What are the beans I need to use to show in the diagnostic page?
Can I get sample code for this log staments?
Thanks in advance,
Padma

Hello. This forum is for reporting problems with the published Oracle documentation. You have a better change of getting a reply if you post your question on the Database - General forum.
Regards,
Diana

How to add an item into the Newsstand

How to add an item into the Newsstand. Please do NOT reply using "tech-language." Use standard- normal everyday English. Thanks,
Don Otlin
Franklin Square, NY

Open Newsstand. Tap on the "Store" button in the upper right. Any newspaper or magazine you download from the store will appear in Newsstand.

CRM IC Winclient - How to add new fields in the BP Search of TRX CIC0

Hello Experts,
I want to know how to add new fields in the BP Search of TRX CIC0. In the HTML that we're using here I need to add the URL of the BP.
Can you help me?
Thanks in advance.
Caíque Escaler

Hi
make append to tables in se11 - CCMBP1FIELDS, CCMBP2FIELDS
in spro in Define customer-specific search control -> mark fields with X.
and enhance html template CRM_CIC_SEARCH_DISPLAY. -> tcode smw0, look for package CRM_CIC_COMPONENTS for html CRM_CIC_SEARCH_DISPLAY. export it from SAP, edit, and import.
you will need to enhance function module used for searching - you will find him in spro in Search Strategies.
Regards
Radek

How to add new fields to the system form (Ex.expenses to a/r invoice form)

hi
can any one tell me how to add new fields to the system form (Ex.expenses to a/r invoice form)
i want to add expenses field to system a/r invoice form and connect data base also.
i used the code of samples\11.system form manipulation(vb.net) but i'm not able to get it....so can any one help with code or concepts.
reply soon plz..
thankQ

If I understood you correctly, you are just trying to add new fields to the invoice form and then use them in your form. you should first go and add the field to your tables, which you would do by going to Tool --> User Defined Fields --> Manage User Fields. There are different documents or categories given. For ex. for invoices, Sales Orders you would add your field under the Marketing Documents. If you want the field to be just one per invoice, add it to the Title, otherwise if you want a field per invoice or Sales Order line, add it to the Rows section. Once you have done that then you can just create a edit box or drop down to represent the field and set the datasource for that to your field. If you want example code to do that, let me know.

How to add new fields to the DME file in F110

Hi,
We have a requirement add new fields to the file that is used in F110.
.I did go in to DMEE transaction but I hae no idea how to add new fileds to the existing file.
Can anybody please help me in resolving the issue.
Thanks
Venkat
Edited by: Venkat R on Jun 8, 2009 8:45 AM

Hi,
There is no function module for that, We have created our own function module and attached to that field.
Refer the below code. This will fetch the document number.
DATA: lwa_item   TYPE dmee_paym_if_type,
        l_fpayp   TYPE fpayp,
        l_fpayhx TYPE fpayhx,
        first_flag TYPE c,
        lv_lifnr   TYPE lifnr,
        voucher_id TYPE string,
        voucher TYPE string,
        invoice_id TYPE belnr_d,
        voucher_len1 TYPE i,
        voucher_len TYPE i.
TYPES:
BEGIN OF lt_regup,
        xblnr TYPE xblnr1,
        belnr TYPE belnr_d,
END OF lt_regup.
DATA: lt_regup TYPE STANDARD TABLE OF regup,
        lv_regup TYPE regup.
Hope this helps.
Raja.A
Edited by: Raja.A on Feb 16, 2011 7:17 PM

How to add default value to the Exclude single value in selection screen..

Similar Messages

Maybe you are looking for