How to Add Likert Scale Pre-Test w/Customized Feedback?

I need to have two quizzes in my course:
One is a Self-Assessment with a 5 point Likert-Scale. There are 6 questions in this set. I need three possible responses depending on how they score (0-4 is one response; 5-8 is another response; 9-12 is another response)
A final quiz at the end with only 3 questions, again giving feedback based on how they respond, this time percentage-wise (they score less than 80% they get feedback, over 80% another feedback)
I am a very basic Captivate 6 user and have no clue how to go about doing this. I've read many forums about pre-tests (which don't seem to include Likert Scales), variables, advanced actions. There HAS to be a simpler way...
Thanks,
Christina

Hi Lilybiri,
Thanks for the quick response. To answer your question...
I'm using Captivate 6. I saw the pretest option but Likert Scale is not an option
I can use a different type of question, but wasn't able to figure out how to have different responses score differently. When I look at the Quiz Properties for MCQ, I only see one overall score value. Here is an example of the type of question I'm using: I proactively develop relationships with those I work with. Options are Never = 1 pt; Sometimes = 2 pt; Often = 3 pt; Always = 4 pt; I Don't Know = 0 pt
If they receive a total of 0-4 pts, their feedback should be: "You can considerably improve your influencing skills by applying the principles in this course"; If they receive a total of 5-8 pts, their feedback should be: "You are already applying some of the principles. Plan to enhance your usage after completing this course." If they receive 9+ pts, the feedback should be: "You are using your influencing skills regularly. Focus on the principles you tend to use less often and coach others on how to become an effective influencer."
Yes, all I need for the Final quiz is the Pass/Fail. I already have that set up and it's working fine (and currently not including the Likert Scale questions = I figured out how to do that based on this link: http://goo.gl/hhjJe)
Thanks,
Christina

Similar Messages

How to add a scale marker in PS CS4 standard? how to update PS extended?

I just installed PS CS4 standard. I found that I needed to have its extended one to add a scale marker in the microscope images.
Please let me know how to add a scale marker with PS CS4 starndard. Or, please let me know how to upgrade it to PS CS4 Extended.
Thanks,

Here's the instructions for Scale markers: Photoshop Help | Measurement (Photoshop Extended)
Now for the not so good news. You need Photoshop Extended, but the CS4 version is no longer sold.
You can either purchase CS6 Extended, Creative Suite 6 (which is over two years old and is no longer updated) or have latest Photoshop as part of the Creative Cloud Photography plan | Adobe Creative Cloud. Photoshop will always have the latest upgrades and versions and it is all "extended", no "standard" here. Run it on Mac or PC, and in many interface languages at no extra charge.
Hope you find something that will work for you.
Gene

How to add user e-mail to a custom report?

Hello,
I am not a sql DBA, but trying to find out exact line that I should add to the query for any custom report, to show user e-mail address field as well.
For example, I use this query for all machines running unwanted software (found this query on google) :
Select
SD.Name0,
sys1.User_Name0,
SF.FileName
From v_r_system sys1
join v_gs_softwarefile sf on sf.resourceid=sys1.resourceid
left join v_R_User usr on usr.User_Name0=sys1.User_Name0
left Join v_R_System SD on SD.ResourceId = SF.ResourceId
Where SF.FileName Like '%Azureus%'
Or SF.FileName Like '%ABC%'
Or SF.FileName Like '%BitComet%'
Order By SD.Name0, SF.FileName, sys1.User_Name0
I do have user discovery enabled with mail attribute, and can see e-mail address getting collected for all the users.
Thanks in Advance

In case it's SQL/SSRS, which I assumed based on the initial query, then your query should look like this:
Select
SD.Name0,
sys1.User_Name0,
usr.Mail0,
SF.FileName
From v_r_system sys1
join v_gs_softwarefile sf on sf.resourceid=sys1.resourceid
left join v_R_User usr on usr.User_Name0=sys1.User_Name0
left Join v_R_System SD on SD.ResourceId = SF.ResourceId
Where SF.FileName Like '%Azureus%'
Or SF.FileName Like '%ABC%'
Or SF.FileName Like '%BitComet%'
Order By SD.Name0, SF.FileName, sys1.User_Name0
My Blog: http://www.petervanderwoude.nl/
Follow me on twitter: pvanderwoude

How can we report off of Test Run Custom Fields in e-Manager?

I'm trying to create reports within Crystal Reports or via SQL Reporting Services to report on test runs and I want to include data from the test run custom fields I've created. I can not find a correlation to link the test runs and the test run custom fields in the DB. Is this even possible?
I can see the related custom field data in e-Manager for each run history. I was thinking there should be some sort of table in the DB to link the data but I can not find it.
Please help
Thanks

You cannot get this from the interface. We added SqlServer Management Studio Express and granted read only access to project managers. They found the view dbo.View_Tests useful in that it connected custom fields to the test cases. There are similar views for requirements and test runs.
Studio Express is found: http://www.microsoft.com/downloads/details.aspx?familyid=C243A5AE-4BD1-4E3D-94B8-5A0F62BF7796&displaylang=en#QuickInfoContainer
You'll need to get access from your DBA and set up an ODBC connection.
Here's a sample query that we've used -- probably doesn't fit your situation but it might get you thinking. Part of it was stolen from another posting to QA zone -- so I figured -- might as well share the wealth:
-- Overall input parameters:
declare @project as integer;
set @project = '20'
declare @iteration as varchar(500);
set @iteration = 'Iteration 1';
declare @team as varchar(500);
set @team = 'SFS';
-- Data on a particular iteration
declare @iteration_tests_run as decimal(10,2);
set @iteration_tests_run = ( select count(*)
                         from dbo.View_Tests A
                         where A.ProjectID = @project
                         and A.Iteration = @iteration
                         and A.Team_test <> 'NULL'
                         and A.LastResult <> 'Not Run');
declare @iteration_tests_passed as decimal(10,2);
set @iteration_tests_passed=( select count(*)
                         from dbo.View_Tests A
                         where A.ProjectID = @project
                         and A.Iteration = @iteration
                         and A.Team_test <> 'NULL'
                         and A.LastResult = 'Passed');
declare @iteration_any_results as decimal(10,2);
set @iteration_any_results=( select count(*)
          from dbo.View_Tests A
          where A.ProjectID = @project
          and A.Team_test <> 'NULL');
-- Data on a particular team's tests for a particular iteration
declare @team_tests_run_by_iteration as decimal(10,2);
set @team_tests_run_by_iteration = (
select count(*)
                         from dbo.View_Tests A
                         where A.ProjectID = @project
                         and A.Team_test = @team
                         and A.Iteration = @iteration
                         and A.LastResult <> 'Not Run');
declare @team_tests_passed_by_iteration as decimal(10,2);
set @team_tests_passed_by_iteration = (
                         select count(*)
                         from dbo.View_Tests A
                         where A.ProjectID = @project
                         and A.Iteration = @iteration
                         and A.Team_test = @team
                         and A.LastResult = 'Passed');
declare @team_tests_any_results_by_iteration as decimal(10,2);
set @team_tests_any_results_by_iteration = (
select count(*)
                         from dbo.View_Tests A
                         where A.ProjectID = @project
and A.iteration = @iteration
                         and A.Team_test = @team );
-- Progress in completion and success of tests in a particular iteration
select (@iteration_tests_run / @iteration_any_results ) * 100 as Iteration_1_percent_complete;
select (@iteration_tests_passed / @iteration_tests_run ) * 100 as Iteration_1_percent_success;
-- Progress in completion and success of tests for a particular test team in a particular iteration
select (@team_tests_run_by_iteration / @team_tests_any_results_by_iteration ) * 100 as SFS_percent_complete_Iteration_1;
select (@team_tests_passed_by_iteration / @team_tests_run_by_iteration ) * 100 as SFS_percent_success_Iteration_1;

How to add parameter to the test file

While we do the 3rd party test, can we add arguments or parameters to the "Test File" which will be loaded by Browse? Since we may have a lot of similar tests, just need to give different parameter for doing similar but different work. Is this possible?
Thanks,
Jason

heyy i could find the solution to it....so am closing the thread..thanksss

How to add a separate community of user (customer) in the same REALM?

I have an existing default REALM we have been using for internal users (i.e employees). Now I have a new community of users (i.e customers) but I want to use the same REALM and the same policy but be able to separate those two communities into two different containers.
current realm where employee accounts are: cn=users, dc=mycompany,dc=com
I want to be able to add customer accounts in the same realm but I need also those customers accounts to not be viewable when a user perform a search in the directory using the self service console.
How do i do that? I have been researching the documentation but I'm not looking for what I need.
Any help really appreciated.

I guess that this was the main reason to have multiple realms.
When users are in the same realm your ACI covering the subtree (cn=users in this case) allow people to search in this realm.
You could of course add a special attribute to the orcluserv2 or create a new objectclass customer with this attribute. Then - when you create a new user in the realm this needs to ba added. However - this is far from trivial - and furthermore you need to ensure that all tools (eg oiddas) support this - which is even more difficult to accomplish.
In the past I have done this in the following way:
Created a subtree cn=regionalmanagers,dc=mycompany,dc=com
Within this tree I had entries that were composed with my own objectclass. This objectclass contained a group (uniquemembers) and I added the users (cn=John.Doe,cn=Users,dc=mycompany,dc=com) to this group. Then I checked from the application with dbms_ldap calls if a user was a regional manager.
cu
Andreas

How to add a value set in a custom form in query_find screen in R12 please

Hello,I need to add a value set fileld found in the fnd_flex_value_set table in a query find screen . How do I proceed please ?
Do I create a record group followed by a 'LOV' ?
Thanks.

Hi;
For your issue i suggest close your thread here as changing thread status to answered and move it to Forum Home » Application Development in PL/SQL » Forms which you can get more quick response
Regard
Helios

How to add Content workflow to Webcenter spaces/ custom application

I would like to add Content work-flows ( Add - review - publish of content) to Webcenter spaces.so that users of Spaces/ application can work with add- publish-review cycle. I want to know if any thing like portlet or something available that can be added.
I have a webcenter 11g associated with OCS 10.1.3. Does the suites Content Portlet Suite/Content Integration Suite contain these workflows? Please help me in this regard thanks.
Thanks,
indra.

Yes. it is the same way. once the Portletsuite is integrated you can create a workflow in Oracle conent server using Workflow Manager Applet. Extenal Identity store needs to be configured.
But I have some problem with webcenter spaces users on external Ldap server. In contribution checkout step ,I am not getting the checkout link. i am getting exception like "not suffient privilage".
But the workflow seems to work fine in idc application.
Unable to get schema fields. User 'auser' does not have sufficient privileges
* !csUserEventMessage,auser,CIS!$!csSchErrorGettingFields!csUserInsufficientAccess,auser
intradoc.common.ServiceException: !csSchErrorGettingFields!csUserInsufficientAccess,auser
at intradoc.server.ServiceRequestImplementor.buildServiceException(ServiceRequestImplementor*
I created Users in webspaces using Own Registration feature. User gets created on Ldap server. And I am able to log on to the content server. If anybody happend to know more on this ,please reply.
Edited by: indra_owc on Dec 21, 2009 7:03 PM

How to add into dynamic selection criteria (FBL1N) - custom field from LFB1

Hello all,
i have following problem. I added new customer field into table LFB1 (Z* field). And now i need to use this field as dynamic selection criteria in transaction FBL1N. I enhanced selection view for logical database KDF - i have created new customer view and I added my new field from LFB1. It is OK, i see this field in dynamic selection criteria in FBL1N but if i try to select according that Z* field, short dump occured.
open cursor with hold LC_KRED for select (VF_KRED_FIELDS)
        from <b>VF_KRED</b>
          where LIFNR in KD_LIFNR
          and   BUKRS in KD_BUKRS
          and   LAND1 in KD_LAND1
          and   KONZS in KD_KONZS
          and   VBUND in KD_VBUND
          and   AKONT in KD_AKONT
          and   BUSAB in KD_BUSAB
          and (VF_KRED_WHERE)
Problem is in VF_KRED - this is database view (LFA1 joins LFB1). This view has no Z* fields and therefore it cannot be use in statement above -> dump.
Is needed repature of standard - enhancement of view VF_KRED?
Thank you very much.

Hi guys,
thanks so far. I managed to show prompts in the report. But still my problem is nor 100% solved
I would like t achieve that the filtered criteria in the report title is separated through a comma like in the report filter summary - e.g.: {001, 002, 003, 004} followed by just 1chart/table that is including the whole information.
When I however just drag a variable into the report it automatically created different sections, right? Like ........ table, chart, whatever... .......table chart whatever........
Regards

Pre-Test in Captivate with rating scale questions

What I want to do with Captivate:
- First an Pre-Test with 35 Questions the learner has to answer. I have to use a scale from 1 to 6.
- These questions belong to 13 groups of questions
- The Results of the questions are to be summed up in grouping variables
- The Score in the variables are responsible, which of the eLearning-Moduls should be highligthed in the TOC
- At last the TOC should be displayed
- I want to use for every of the following moduls an own project (to reduce the size of every project)
- I have to import this all in the LMS ILIAS (Scorm 1.2 and Scorm 2004)
- the learner should be able to interrupt the application at any time and resume again
I have seen the Thread "how to make a Pre Test in Captivate 4" and I work out the script-example inside the Captivate-Help and the ebook from Rick Stone.
What is the recommendation
1. to realize the slides with the questions (they should be self-created, but how to do?)
2. to realize the code in the advanced actions
3. to realize the working-together of the project with pre-test and toc and all the following modules
Perhaps, someone has an example for me.
Best regards
Winfried

Hello Winfried,
Spent a couple of hours yesterday to work out a proposition. Must confess that I realized it in CP5, mostly to save some time with the Advanced Actions but it could be done in CP4 too. Beware: I did not bother a lot about the layout, graphics, just tried to find a workflow that will achieve your goal only using Captivate (no widgets, no to be written Flash-SWF's) within a reasonable amount of time. There is quite a lot of copy/paste possible, repetitive tasks that are a bit monotonous, sorry about it, and some discipline is necessary.
To start with: I made some choices to simplfy.
You showed me a screenshot with buttons to click on (little bit like the Likert Question slide) but I have preferred to have the user introduce a number from 1 to 6, which means you'll need a legend to explain on each page. If you really want the six buttons later on, you should look for a widget or a Flash SWF that returns a value = clicked button (1 to 6). To achieve this in Cp alone would be a tremendous work. You should have to take into account that a user can change his mind and click on another button... With my system (typing a number) this is no issue.
Choose to put 13 questions on each slide, one for each question group. This makes it possible to prepare one slide and copy it twice (to have 39 possible questions). There will have to be done some minor changes on the copies, but most of the work can be taken over. If you prefer to have less questions/slide that would be also possible, but then you'll have different copies (p.e. a slide with 7 and a slide with 6 questions).
Choose to have a submit button for each question that will trigger an advanced action. Mostly need this to check after completion of a slide if all questions have been answered. If you do not like those many 'Submit' buttons, in CP5 this could be easily replaced, in CP4 it will take some more working time.
First screenshot of a question slide:
In this screenshot you'll see 13 questions with 13 Text Entry Boxes. For the TEB I provided the Submit button and only the Failure Caption (red one: put all of them in the same spot). The value entered in the TEB is stored in a user variable, so I needed 13 user variables for this slide, labeled them:
v_1 v_2 .... v_13.
Same user variables will be used on the next question slide (if you have less questions/slide you'll need less user vars of this kind).
TEB is validated for the values 1 up till 6. If another number is entered the Failure Caption shows up.
The blue Text Captino (Please, answer all...) is initially hidden when entering the slide (action for On Enter slide).
Each Submit button triggers an Advanced action (labeled first AddGroup1) on success (slightly different, you'll need 13 of then, but copy can limit the work), with variables:
created one variable 'v_counter' to store the number of correct answers on the slide, will be used to check if all questions have been answered; this counter is set to the value 0 on entering the slide
created 13 group variables v_G1 v_G2.... v_G13 to store the total score per group
labeled actions like AddGroup1:
increments counter with 1
adds value stored in v_1 to the variable v_G1
because playhead shouldn't move on the Timeline, set the system var rdcmndGotoFrame = rdInfoCurrentFrame
in the 12 copies of this action, only second action has to be changed
Next button allows the user to go to the next slide, but triggers another advanced action, that I labeled TestCompleteSlide1. You'll need a slightly different action for each Question slide, but again copy does most of the work. This action:
checks if the variable counter is different from 13
if it is different:
the blue Text Caption is showed to insist on answering all the questions (this is what had to be changed on copy, because each text caption has its proper ID, blue Text Caption on second question slide has a different ID from that on first)
rdcmndGotoFrame = rdInfoCurrentFrame - 2 to put back the playhead
if it is 13, jump to next slide
Last slide is TOC: The modules to be taken will be marked with a green circle in this screenshot and get a click box over the name and the green circle. Those not to be taken will be marked with a red triangle and not have a click box. You'll have to configure the click boxes to open the proper module. Initially all click boxes are there but invisible. Same for all green circles and red triangles. They will get visible based on checking the value of the grouping variables v_G1 v_G2.... v_G13. Just a screenshot here, if you confirm that you want to try my proposition, will explain further. This was rather easy in CP5, will not be in CP4, that is why I didn't yet work it out in CP4:
Lilybiri

How to add a video play list on palm pre

Does anybody knows how to add a video play list in palm pre?
I did try to add video in different folders but in the palm device are loaded in the same playlist. Is there a way to organize video files?
tks
Post relates to: Pre p100ueu (O2)

QuickTime requires player and plugins that most people don't have. You'll reach a much wider audience if you use HTML5 <video> with mp4, webm and ogg files.
<!doctype html>
<html>
<head>
<meta charset="utf-8">
<title>HTML5 with Video</title>


</head>
<style>
video {
    max-width:100%;
    display:block;
    margin:0 auto;
</style>
<body>
<h2>Use 3 File Types to support all browsers & mobile devices: MP4, WEBM and OGV.</h2>
<h3>Online Video Converter
http://video.online-convert.com/</h3>

<video controls poster="Your_poster_image.jpg">

<source src="http://techslides.com/demos/sample-videos/small.webm" type="video/webm">
<source src="http://techslides.com/demos/sample-videos/small.ogv" type="video/ogg">
<source src="http://techslides.com/demos/sample-videos/small.mp4" type="video/mp4">
If you're seeing this, you're using an
outdated browser that doesn't support
the video tag. </video>

</body>
</html>
Nancy O.

How to add multiple test conditions in 'test' attribute expression of xsl:if tag

Hi all,
How to add multiple test conditions in 'test' attribute expression of <xsl:if> tag ?
I have 2 parameters and I want To skip the massage if this 2 conditions happened I tried to write it :
        <xsl:when test="($TransferToCompany = 0 and $ObjectInclide=1 )">
        <b1im_skip xmlns="" info=" Obect Will Not Transfer To company">
        </b1im_skip>
      </xsl:when>
But I get an error while I am trying to transfer The object (Account) true B1if
I am working with SBO 9 PL 13
thank you
shachar

Hi saado
Check this link:
http://stackoverflow.com/questions/318875/can-you-put-two-conditions-in-an-xslt-test-attribute
Kind regards,
Radek

How to add new browser type in visual studio 2010 performance test?

Hi All,
Currently we have various list of browsers in browser type drop down,Suppose if i want to add browsers like Internet Explorer 9 (or) 10,Firefox 33 (or) later version.How to add?

Thanks for Adrian's help.
Hi Balaji,
Based on your issue, I agree with Adrian's suggestion. Therefore, I suggest you can try Adrian's suggestion to refer the link of Cybermaxs' reply check your issue.
In addition, I suggest you can use fiddler to check the header definition.
For more information, I suggest you can refer the Shiv_P's reply in the following link.
Reference:
https://social.msdn.microsoft.com/Forums/en-US/9bb37eec-3467-4fcb-8537-648d04e91e2f/how-to-add-latest-chrome-browser-plugin-in-visual-studio-2010-ultimate-for-performance-testing?forum=vstest
Best Regards,
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

How can I skip/pass a lesson when the pre-test is passed?

I'm creating a course with an overview and 3 lessons. Each is its own CP file (Captivate 6).
This course will be hosted in our LMS, where I will require each lesson to be taken/passed.
Lesson 1 is introductory/background material about my topic, and my users may or may not have had exposure to this information already. If they know the info, there's no need for them to take this lesson.
I have added a pre-test to the lesson, that, if failed, forces the user to go through the lesson content and a graded quiz at the end. The score is reported to the LMS and all is well.
If the user passes the pre-test, s/he is jumped to a congrats slide and instructed to exit the lesson. (No need to take the graded quiz - the questions are the same, and they've already "passed.")
My question: How do I report a PASS for the lesson if the user doesn't take the graded quiz? I don't need to report any particular score.
Thanks for any help you can offer!

Lieve, I'd LOVE to see your blog post about this topic - especially since you always include examples. =)
Request: I need help with reporting.
Here's my project's Branch View (click to view larger):
I've done as you suggested as far as I know. The navigation works perfectly, but when it comes to reporting, I'm not seeing what I expect/want.
What I want:
For the user to be able to skip the pre-test (the branching image shows this)If the user passes the pre-test, can exit the course with a Complete/Pass
For the user to have X number of chances at the test. After the user a) passes or b) uses up X chances and still fails, I want to report back to my LMS (I'm testing in scormcloud right now, but will be using HealthStream) both completion AND pass or fail.
What I've got:
The user CAN skip the pre-test (the branching works, anyway)
I can get Captivate to report Complete/Unknown or Complete/Pass (sometimes, even when the user fails the graded quiz), or Incomplete/Unknown.

How to add silver front panel theme for labview 2010

how to add silver front panel theme for labview 2010

Mahisnair wrote:
yes i had tried this way but the vi built with silver theme doesnt look good in 2010 :-(
wish if there was a way to include silver theme in 2010
The only way I see to make it like that would be to recreate the theme in LabVIEW 2010 with external bitmap objects. Unfortunately it won't be as functional as the silver controls in various terms such scaling (bitmaps scale very badly) or transparency and click through functionality (a bitmap assigned to a control part will always catch all clicks and never allow a click to pass through anywhere to a lower layered part).
The silver controls are using special internal graphic objects that were added in LabVIEW 2011, so recreating silver controls with the same functionality in earlier LabVIEW versions is impossible.
Rolf Kalbermatter
CIT Engineering Netherlands
a division of Test & Measurement Solutions

How to Add Likert Scale Pre-Test w/Customized Feedback?

Similar Messages

Maybe you are looking for