How to add a value set in a custom form in query_find screen in R12 please
Hello,I need to add a value set fileld found in the fnd_flex_value_set table in a query find screen . How do I proceed please ?
Do I create a record group followed by a 'LOV' ?
Thanks.
Hi;
For your issue i suggest close your thread here as changing thread status to answered and move it to Forum Home » Application Development in PL/SQL » Forms which you can get more quick response
Regard
Helios
Similar Messages
-
In Scom,How to add CAC value in given MP (management pack)? Please give me in detail procedure with example if possible.
Hi
CAC is System.ConsolidatorCondition condition detection module used to consolidate the monitoring i.e. you can generate an alert on multiple occurrence of issues instituted of generating single alert for issue.
refer below link for more information
http://msdn.microsoft.com/en-us/library/ee809324.aspx
http://social.technet.microsoft.com/wiki/contents/articles/20301.how-to-add-consolidation-for-url-monitoring-in-scom-20072012.aspx
Regards
sridhar v -
How to add field value to the standard table
Hi,
How to add field value to the standard table?
for example:
when we go to TCODE SE16-> VBAK table -> on the selection screen if we press F4 against VBTYP we get all the available values for that field. How to add a new document Category value to this field so that it shows up in F4 help for that field.Hi Asif,
I don't think it is possible and feasible for adding new field value to the field VBTYP because it is not possible through SPRO.
If u see the domain of this field VBTYP we have fixed values provided by SAP. There is no value table for this. If u have value table then it will be updated through SPRO. But still if u really want to add some value u can do that by getting access key and add the value in the fixed values of the domain. But of no use other than simply displaying in F4. Because for what ever value u created here there will be no documents in VBAK or any table using this domain.
Hope this is clear for u.
Thanks,
Vinod. -
How to use Special value set with Column clause to display addtional column
hi
can anyone tell me
How to use Special value set with Column clause to display addtional column
how can i use FND POPID and with COLUMN clause ?Dear Yaseen,
To get the value in formula cumulative,after you have created the formula for that particular key figure,go to edit and click on tab "calculations".
In that select overall result as 'count all values not equal to zero' and single result as 'count all values not equal to zero' .
And mark the cumulative check box underneath.
I hope you get the desired result and please do me favour .
Sumit goomber -
How to add integer value of two buttons?
how to add integer value of two buttons (any button) in VI and display it in output text box? i have attached example program, but i know its wrong.. please help
Solved!
Go to Solution.
Attachments:
add.vi 8 KBthanks for reply. i am trying to assign an integer value to a button and the button should send the assigned integer value to TCP/IP write, only when the button is pressed. i am able to send data using string control (as shown in the attachment) but i want to replace it with several buttons. for example, if i enter 2 in string control, this data will be sent to a robot (robot has wifi card) through tcp/ip protocol, it moves front. 3 will make it to move back, 8 is left, 6 is right. this numeric data is already burnt into blackfin processor of the robot. so just by entering numbers in labview can make my robot move in specified direction. can you please help me to create a button with value and convert it into string and send it to tcp/ip write. this should happen only when the button is pressed. because, if i enter numbers in string control, it dosent looks good..... if i have buttons... i think my VI will look good and hitech.
Attachments:
robo.vi 9 KB -
How to add varchar values in oracle.Consider as both are time values.but the data type[both] is varchar and stroed in table
For example:
Column1 Column2
2.40:10 PM 5:22:00
i need the result for the following format
8.02[8 hours and 2 minutes]with c as
(select '2:40:10 PM' t1, '5:22:00 PM' t2 from dual)
select hr+level ||':'||to_char(mi - (level*60))||':'||sc Time from
select sum(h) hr,sum(m) mi, sum(s) sc from
(select
substr(t1,1,instr(t1,':',1)-1) h, substr(t1,instr(t1,':',1)+1,instr(t1,':',2)) m, substr(t1,instr(t1,':',3)+1,instr(t1,':',3) - instr(t1,':',2)) s, substr(t1,-2) t
from c
union
select
substr(t2,1,instr(t2,':',1)-1), substr(t2,instr(t2,':',1)+1,instr(t2,':',2)), substr(t2,instr(t2,':',3)+1,instr(t2,':',3) - instr(t2,':',2)), substr(t2,-2)
from c
connect by level<(mi-60)
TIME
8:2:10 -
How to Add a parameter of currency exchange rate in the selection screen
Dear Friends,
How to Add a parameter of currency exchange rate in the selection screen with format (9999.99999). wich field i need to take.
Thanks,
SridharTCURR-UKURS.
~Suresh -
How to add empty rows in table in smart form
how to add empty rows in table in smart form?
plz help me regarding this
send me ur queries to [email protected]You will need to add some extra rows to the internal table that your table is displaying. Use a program node to append additional rows with a key but no argument.
Alternaively a template may me more suitable for your requirement than a table.
Finally, please do not include you e-mail address in your question. Your question and the answers provided to it are for the benefit of everyone in the Community.
Regards,
Nick -
How to assign NULL value to an ITEM in Forms Personalization?
Hi,
how to assign NULL value to an ITEM in Forms Personalization?
please suggest me.
ThanksI don't know what your form personalization does and maybe I misunderstand you ...
Try
:item_name := null; -
Add search (torch) functionality with in custom form
Hi
I wanted to add search functionality (torch) in my custom form. How to do that? Any guideline or ez steps to follow to give serach on certain field of my custom form?
regardsChapter 8 of developer guide helps a lot. Just wanna share if someone curious.
regards -
How to add selected values from table(selected using checkbox)to table?
Hi All,
i have created simple page with search panel with table in table i have created one column as check box for selecting.
here what my requirement is i need to do search multiple times to add some roles to from some different categories.here whenever i searched i ll get some roles into table there i ll select some role and i ll click add buttion. whenever i click add i need to add those roles into some other table finally i ll submit added roles.
here i followed one link http://www.oracle.com/technetwork/developer-tools/adf/learnmore/99-checkbox-for-delete-in-table-1539659.pdf
i used same code and able to see selected row in console, as object array how to add these into table.
please help me out
Thanks in advance
siva shankarThank you for a quick reply
i used the same thing before i go for table check box concept.here what i observed is when i search i am getting some results i am able to shuttle.but if i search again the shuttle is refreshing with new values even not available list its refreshing selected list. IF dont want refresh selected ones.
my usecase after make some searches I will select some roles from different categories at finally i ll submit.
i hope you understand me requirement. please suggest me is this requirement is possible in shuttle component? if yes please guide me.
thanks
Siva Sankar -
How to create a value sets for concurrent program?
Hi Friends,
I am creating a concurrent program with a parameter period...
In the value set for the parameter period, I am using the following query :
---where application_id = 101
and set_of_books_id = :$PROFILES$.gl_set_of_bks_id
and closing_status IN ( 'O', 'F', 'C')
order by period_year, period_num' ----
In my cursor, i have a condition 'where set_of_books_id = ' ---
How can I pass the above set of books id into the cursor ?? it is not working when I am defining another parameter as Book and passing that value to the cursor....
I need that period parameter to return all the periods for the set of books where we are running the concurrent request from...I also need to get the set of books id for my cursor...
Hope I am making sense...All that I am trying is to have period parameter and also a SOB id in cursor condition...
Rgds,Hi Vamsi /Nitin,
Let me explain the whole thing now.....
My plsql procedure is ......
CREATE OR REPLACE procedure GL_INT(
perrbuff out varchar2,
pretcode out varchar2,
pbook in varchar2,
pperiod in varchar2
) is
cursor cur1 (p_sdate in date, p_edate in date )is
select distinct group_id groupid,
user_je_source_name source
from gl_interface
where accounting_date >= p_sdate
and accounting_date <= p_edate
and set_of_books_id = pbook;
cursor cur2 is
select distinct start_date sdate,
end_date edate, period_name period
from gl_period_statuses
where period_name = pperiod
and set_of_books_id = pbook
and application_id = 101;
i cur1%rowtype;
j cur2%rowtype;
begin
open cur2;
fnd_file.put_line(fnd_file.output,'PERIOD'||'----'||'GROUPID'||
'----'|| 'SOURCE');
loop
fetch cur2 into J;
exit when cur2%notfound;
open cur1(J.sdate,J.edate);
loop
fetch cur1 into I;
exit when cur1%notfound;
fnd_file.put_line(fnd_file.output, J.period||'----'||I.groupid||'----'||
I.source);
end loop;
end loop;
Close cur1;
close cur2;
Exception when others then dbms_output.put_line(SQLERRM);
end;
==================================================================================================
For SOB value set, I have passed the default value as vamsi suggested ($profiles$.gl_set_of_bks_id)....
For period value set, I have entered query as ..where application_id = 101
and set_of_books_id = :$PROFILES$.gl_set_of_bks_id
and closing_status IN ( 'O', 'F', 'C')
order by period_year, period_num...................
It still doesn't work....I don't know how to derive those Periods based on the SOBs and at the same time pass SOB id into the cursors...
Please help...
Rgds,
Murali -
How to add statiscal value in intrastat report for free of charge Pur Order
Hi Experts,
In Purchase Order if 'free of charge' check box is ticked then it wont allow us to have condition tab ( as there should not be any pricing for FOC) - SAP Standard functionality.
But since I want to report this purchase order in Intrastat report, I need to have some statiscal value for this purchase order.
Can somebody help me how I can add statistical Value to this PO in Intrastat Report ?
I have already tried following option :
1) I try to update through user exit but it is again coming as ZERO - Hence not allowing to update.
2) VEFU- Manually update the records - Not possible to edit Stats/Invoice Value of PO - Hence ruled out.
3) Incompletion log - It is showing/ directing me to the PO in change mode but I cannot edit this as there is no condition tab - Hence not possible.
Can somebody help me ?
Thanks
Arpitmay be you can enetr it in PO header text and extract via z program
-
How to reuse a value set in the filter into an LMD process
Using apex 3.2, I'm wondering how to re-use the value currently set into the filter (interactive report) into a LMD process attached to a button created on the same page.
The process on Submit - after validations and computations, I presume, should look like to the following statement, but in a dynamic way:
begin
insert into table2 select * from table1
where study = 'ABCD';
end;
I tested the following clauses options, which none of them work:
a) where study = :STUDY
b) where study = :IR_STUDY
setting the debbug to on, I could realize that the report was based on (apparently, APEX generates APXWS_EXPR_1 bind variable for the first parameter and APXWS_EXPR_2 if a second parameter is used into the filter, and so on...) :
where ("STUDY" = :APXWS_EXPR_1)
and then saw :
0.28: IR binding: ":APXWS_EXPR_1"="APXWS_EXPR_1" value="ABCD"
0.28: IR binding: ":APXWS_MAX_ROW_CNT"="APXWS_MAX_ROW_CNT" value="10000"
of course, I thought that the clause 'where ("STUDY" = :APXWS_EXPR_1)' could work. Unfortunaltely, not.
any king of support is welcome.
Thanks a lot,
Brunobut I don't know how to execute it from putty ? Can some one help me.Use the same command. Just make sure you are logged in as applmgr user and source the application env file before you run the command. Also, make sure you issue the command in a directory where applmgr has read/write privilege.
How to Load Value Set Values When Using Fndload To Load A Concurrent Program [ID 252853.1]
Tips About FNDLOAD [ID 735338.1]
How To Download A Single Flexfield Structure Using FNDLOAD? [ID 745689.1]
Download Multiple Flexfields From FNDLOAD [ID 316600.1]
Thanks,
Hussein -
How to add HEX values in a Report.
I have a special requirement. I need to add hex values in a report. To be specific, the special HEX characters: 0D 0A 0C 0C, has to be added to TOP of PAGE event.
Drawing What I want will be something like that:
CR/LF FF/FFABCDEFHGIJKLMNOZVCXC
This is a Report that has to be send to the spool. Once in the spool will be converted to TXT file. I created a small code using print control function but still It is doesnt working.
I defined a print control ZPAGE as 0D 0A 0C 0C.
Any idea how to do this?.
** This report doesnt include the Top-of Page event.
** Example Report.
REPORT ZCAPRTHEX2 NO STANDARD PAGE HEADING.
Data: String1(120) type c value 'ABCDEFHGIJKLMNOZVCXC'.
WRITE : /.
PRINT-CONTROL FUNCTION 'ZPAGE'.
WRITE : string1.
This is what I see in SP01 as HEX View
ABCDEFHGIJKLMNO ZVCXC #ZPAGEIf you download spool to file like that, you are still getting the spool in SAP format, it's not going to have the hex chars. You need to print the file by clicking on printer button. SAP generates file in printer readable format and send it to printer. I'm refering to that file.
Ask your basis folks to write the spool output reqest file to a file instead of sending to the printer. Open that file in hex viewer.
Regards
Sridhar
Maybe you are looking for
-
My phone was stolen, how do I retrieve my pictures from iCloud?
I just finished a 3 week trip in Europe and on the very last day my phone (a 4S) was stolen. It contained all my photos from the trip. It's very unlikely that I will get the phone back, so I am hoping that there's a way to retrieve my photos. The pho
-
Hi, I have a very peculiar problem. I use Oracle 8i, and I use Oracle 8i for my development. My call to stored procedure is successfull for the first time. The second time I call it, it does not work. I am not able to reproduce it in a stand alone co
-
I've been reading about some issues with the I Phone 5, I want to purchase an IPhone for my son but would like help with which one to buy.
-
Aperture 3.5 repeatedly crashes when cropping or editing. 10.9.4 on a 24" iMac early 2009 Processor 3.06 GHz Intel Core 2 Duo. Crash report: Processor 3.06 GHz Intel Core 2 Duo. Able to edit 3 or 4 photos before crashing again. Repair run
-
HI All, I have a requirement like this; Two background jobs are to be scheduled, Job A, Job B. Both jobs will run daily. Job A will run at 8pm, and job B will run after completion of Job A. Through SM36 I have scheduled job A to run at 8pm, periodic,