How to add Markers?

I did a search on how to add markers and it said press Command-Option. I did and nothing happened.
So how do you add markers and can I write something of reference in them like 2nd Verse?
Thanks.

Thanks to previous posts I have successfully added markers to my project. Unfortunately these don't do what I expected them to! I have a 55 minute programme which I would like to divide into chunks for CD playback purposes -- so that the programme runs through without a stop, but listeners can hit the 2,3,4 etc if they want to start at a particular place (just as they would do if you had different record tracks, although these, of course, are normally recorded as separate tracks in the first place). I surely can't be asking for the impossible on such a sophisticated piece of work as Logic, can I? I have Logic 7 updated to 7.2.
(Oh, and what are the markers for?!)
Many thanks . . .

Similar Messages

How to add chapter markers in GarageBand

I have never added chapter markers in GarageBand, and I assume that most other iMovie users had not either. Here is a little walkthrough I wrote up after going through the process.
http://imovie08.blogspot.com/2007/08/how-to-add-chapter-markers.html

Barbara,
I agree with WT that the user manual is worth taking a look at. Here is a link to the marker editing process – which takes place in the Preview window of Compressor.
If you continue to encounter problems, provide us with additional details about your project and what issues you've encountered.
Good luck.
Russ

Can't add markers to SOME subclips but can add them to others

Hi. First time poster, I hope I'm not accidentally posting this in the wrong section. I have scoured the discussions for this problem or I wouldn't dry your eyeballs with this.
Suddenly, right in the middle of editing, I can no longer ADD markers to some specific clips in my bin. It is the oddest thing. In anticipation of questions, I'll give every detail I can conjure, I hope I'm not being too verbose but it's a very puzzling situation.
- The "problem" subclips, to which I can suddenly no longer add markers, at one point had completely normal marker functionality. There's pre-existing markers on these clips that are now no longer editable (with the M or ` key), and every marker menu item under mark -> markers is greyed out, EXCEPT for "add" and "delete all..." neither of which work on the problem clips anyway. These are all functions that work as usual on the non-problem clips.
- Within the problem subclips, I can still navigate to the next and previous markers, with shortcut keys and menu commands. But when I hit M on a marker in a problem clip, nothing happens. And when I hit M in a "blank" space in a problem clip, again, nothing happens, i.e., no marker is added. Nor do the menu commands pertaining to markers function.
- the clips in question are subclips, but so are the clips that have absolutely no problem with marker functionality.
- the clips not having this problem, which outnumber those that do, are not only in the same format, same media, same compression, from the same tape, captured in the same session and on the same drive but are even from the same "master clip" as their problematic siblings.
- the master clip in question has normal marker functionality.
- brand new subclips from that master clip have normal marker functionality, even if their in and out points are identical to the problem subclips...but then again, that's not surprising, since the old ones had "normal births," too.
- if I copy and paste the problem subclips in the bin, the copies have the same problem.
- if I "duplicate as new master clip" the problem subclips in the bin, the duplicates have the same problem.
- I can still edit the markers on the problem clips by right-clicking the drop-down list of markers IN THE BIN and selecting "edit." I can also delete them there by selecting them in the bin and hitting the delete key.
- doing so does not enable me to add more markers. Which reminds me:
- I am not doing something weird with markers - even if there was a quota on markers, I imagine I'm nowhere near it. it just seems like I'm the "crazy marker guy" because you're reading six pages of me talking about markers. I'm not the crazy marker guy. I'm an ordinary man with a crazy marker problem. I use markers the way you do. I mark the beginnings of takes and noteworthy reactions, etc....there's maybe an average of 15 note markers in each subclip, but plenty of "functioning" subclips from the same master clip have more markers than the problem ones.
- yeah, I quit and restarted FCP. And my computer. Yeah, my "M" key works (look how many times I've used it), My mouse is plugged in, I combed my hair, my software's not stolen, I purged my render files and, believe it or not, I only had one coffee this morning.
- I haven't been working with FCP so long that I can say I have or haven't had this problem with non subclips. I've only done a couple projects with FCP so far...this one is not unusual in comparison, but this is definitely the first problem I've ever had with FCP.
- If you have read this far, you are hero not just to me, but to all of humanity.
- if you have the solution, you are a God or I am an idiot, I am praying for either to be the case and I'm not picky. Seriously, thanks in advance to anyone that wastes their brain on this.

Figure I may as well update this thread with the different things I try. I know this makes for compelling reading and I don't want to deny you the story.
- I deleted the Final Cut plist file from the preferences folder, which not only had no impact on the problem, but no apparent impact on Final Cut, which is weird, but, one riddle at a time.
- I went through my autosave vault on the scratch disk, which deepened the confusion for me: each of the three problem-clips had a specific time before and after they became frozen to marker activity. I loaded the autosaved project from 11 am, for instance, and apparently, at that time, the most recent clip to become marker-locked was still working fine, but the other two weren't. A few hours earlier than that, only one of them had the problem, and at about 6:30 this morning, the problem didn't exist.
An important thing to note is that the order in which these clips became marker-locked follows the order in which I went through them, marked their takes and moved on.
I didn't notice the problem with any of them until much later - when a creative shift prompted me to add some new marks, at which point I realized that for three of my clips, I couldn't.
So, if this problem is being triggered by me, it's happening not during actual marking (I would have noticed), but during the things I do with marked clips, namely shuttling through them with the JKL keys, jumping to each of the markers, setting in and out points and inserting them into the timeline.
Is there some key it's possible for a less than attentive, sleep deprived, FCP newbie to hit, during that activity, that "locks" the current clip to the addition and adjustment of markers? As sensitive as my ego is, I really want this to be my fault so I can learn the problem and avoid it forever. I don't want to think there's some supernatural time bomb glitch in the one copy of FCP I bought that causes random clips to slowly dry like cement after which they can never be marked again.

How to add a scale marker in PS CS4 standard? how to update PS extended?

I just installed PS CS4 standard. I found that I needed to have its extended one to add a scale marker in the microscope images.
Please let me know how to add a scale marker with PS CS4 starndard. Or, please let me know how to upgrade it to PS CS4 Extended.
Thanks,

Here's the instructions for Scale markers: Photoshop Help | Measurement (Photoshop Extended)
Now for the not so good news. You need Photoshop Extended, but the CS4 version is no longer sold.
You can either purchase CS6 Extended, Creative Suite 6 (which is over two years old and is no longer updated) or have latest Photoshop as part of the Creative Cloud Photography plan | Adobe Creative Cloud. Photoshop will always have the latest upgrades and versions and it is all "extended", no "standard" here. Run it on Mac or PC, and in many interface languages at no extra charge.
Hope you find something that will work for you.
Gene

How to add navigation cuepoints to the mediaplayer and seek to them? (OSMF)

oHi, I'm working in a livestreaming player and I'm having some problems doing a seek to the 1st second, I've been reading something about it and I found that the seek action works based on keyframes.
I found that keyframes can be add using cuepoints (NAVIGATION cuepoints).
So I tried to do it like this:
==== Code capture =====
var nuevoCuePoint:CuePoint=new CuePoint (CuePointType.NAVIGATION, 1, "primer segundo", null);
var timelineMetadata: TimelineMetadata =new TimelineMetadata (mediaPlayer.media);
timelineMetadata.addMarker(nuevoCuePoint);
==== /Code capture =====
and then I try to do the seek to it:
==== Code capture =====
mediaPlayer.seek(1);
==== /Code capture =====
Anyway... I'm new in using this library so please excuse me for the dummy code and thanks for your advises

Okay, there is some things about the CuePoint Sample that don't quite make sense to me.
When I try to add markers to the dynamicTimelineMetadata, I keep getting "null" when I trace the dynamicTimelineMetadata.
For this event:
MediaElementEvent.METADATA_ADD
Is that triggered when a marker is added to the dynamicTimeLineMetaData?
Because if the dynamicTimelineMetadata is returning null,
then how can I add a marker to it?

How to add Actionscript cuepoints in the latest version?

I can't figure out how to add Actionscript cuepoints...I see some documentation from November 2009 online but it doesn't match the OSMF docs online for Sprint 10.
I seem to be able to add a cuepoint by writing:
var cuePoint:CuePoint = new CuePoint(CuePointType.ACTIONSCRIPT, 1, "good point", null);
videoElement.addEventListener(MediaElementEvent.METADATA_ADD, onMetadataAdd);
But when I take these two functions from the OSMF online docs:
private function onMetadataAdd(event:MediaElementEvent):void
             if (event.namespaceURL == CuePoint.DYNAMIC_CUEPOINTS_NAMESPACE)
                var timelineMetadata:TimelineMetadata = videoElement.getMetadata(CuePoint.DYNAMIC_CUEPOINTS_NAMESPACE) as TimelineMetadata;
                 timelineMetadata.addEventListener(TimelineMetadataEvent.MARKER_TIME_REACHED, onCuePoint);
        private function onCuePoint(event:TimelineMetadataEvent):void
             var cuePoint:CuePoint = event.marker as CuePoint;
             trace("Cue Point at " + cuePoint.time);
I'm not getting any trace message at 1 second into the video?

Okay, there is some things about the CuePoint Sample that don't quite make sense to me.
When I try to add markers to the dynamicTimelineMetadata, I keep getting "null" when I trace the dynamicTimelineMetadata.
For this event:
MediaElementEvent.METADATA_ADD
Is that triggered when a marker is added to the dynamicTimeLineMetaData?
Because if the dynamicTimelineMetadata is returning null,
then how can I add a marker to it?

How to add fields to already loaded cube or dso and how to fill records in

how to add fields to already loaded cube or dso and how to fill it.can any one tell me the critical issues in data loading process..?

This is sensitive task with regards to large volumes of data in infoproviders.
The issue is to reload of data in case of adjusted structures of infoproviders.
Indeed there are some tricks. See following:
http://weblogs.sdn.sap.com/cs/blank/view/wlg/19300
https://service.sap.com/sap/support/notes/1287382

How to add a library (libSomeRandomlib.so) to a project....??

Ok, so I've been trying to get CERN's ROOT program/libraries to work in an xcode project for a while, but I'm running into one really weird error, and I think I may just not know how to add a library to a project correctly.
Suppose I create a new Xcode C++ command line tool project. I hit Build and go, and it gives me a nice little Hello World! in the console, just as it should. If I then click on the project in Groups & Files, go to Project>Add to Project..., and choose, say, libCint.so, from my root/lib directory, and click ok, then click Build & Go, I get an error in the console:
dyld: Library not loaded: @rpath/libCint.so
Referenced from: /Users/paulthompson/Documents/Programming/Build Products/Debug/LibraryIncludeTest
Reason: image not found
sharedlibrary apply-load-rules all
Data Formatters temporarily unavailable, will re-try after a 'continue'. (Cannot call into the loader at present, it is locked.)
My assumption is that either I'm missing a step in the process of adding a library, or else there is something jacked up with the libraries themselves. Anyone have any advice?
Thanks,
Paul
EDIT* Oh, I should mention that the actuall binary that gets built after adding the library WILL execute properly in the Finder, or from terminal, just not with the Build & Go, or Go commands from within xcode.
Message was edited by: TraxusIV

TraxusIV wrote:
Results of otool:
LibraryIncludeTest:
@rpath/libCint.so (compatibility version 0.0.0, current version 0.0.0)
/usr/lib/libstdc++.6.dylib (compatibility version 7.0.0, current version 7.9.0)
/usr/lib/libSystem.B.dylib (compatibility version 1.0.0, current version 123.0.0)
Macintosh-9:Debug paulthompson$ otool -L /Applications/CERNRoot/root/lib/libCint.so
/Applications/CERNRoot/root/lib/libCint.so:
@rpath/libCint.so (compatibility version 0.0.0, current version 0.0.0)
/usr/lib/libSystem.B.dylib (compatibility version 1.0.0, current version 125.2.0)
/usr/lib/libstdc++.6.dylib (compatibility version 7.0.0, current version 7.9.0)
I honestly don't know much about @rpath. I found this page that explains it a bit more: http://blogs.sun.com/dipol/entry/dynamiclibraries_rpath_andmac
So, since I don't want to deploy with the environment variable set, I should ask, what IS the correct, MacOS X way to do it?
The best way to find that is to look at how Apple does it. They put frameworks in /System/Library/Frameworks and regular shared libraries in the standard places. You can do the same. Put your frameworks into /Library/Frameworks and your shared libraries into /usr/local-based paths.
If you want to create stand-alone executables that can be installed via drag-n-drop, you can put shared libraries inside the application bundle. If your shared libraries/frameworks are elsewhere, you will need some sort of installer to get them installed.
I've been sifting through Apple's developer documentation but I have yet to find a concise, straightforward explanation of how to add shared libraries. I'm horribly confused at this point. Is there a good tutorial available anywhere for both the general unix case of linking to dylibs and .so's, and the Mac specific case?
Hopefully someone else knows an answer for this one.
*EDIT* I do already have the variable defined both in ~/.MacOS/environment.plist and also in Xcode as an additional user variable.
I'm not sure about the whole RPATH thing. Setting environment.plist will define environment variables for use in the Finder, but that is really a hack. There are better ways to do it, but if you are porting some open-source programs, that may be the only way. You should be able to define those variables in Xcode. You have to selected the debug executable under "Exectuables"

How to add A single row at the middle of the table in a Webi report

Hi,
I created a Webi report using Universe(Created universe using bex query).Now i have a requirement to display a row at the middle of a report. Can you please tell me ,how to add a sigle row at the middle of a Webi report.
Thanks in advance
Regards
Monika

Hi Monika,
It is not really possible to add a row (I assume you mean of unrelated data) to the middle of a table in a report. You can add a new table with a single row between two tables. For instance you could add a new one row table, or even single cells which are positioned relatively between two tables. Possibly a block on top of another. But this gets tricky.
Can you explain in more detail what you are trying to do?
Thanks

How to create a job card and how to add waranty card in sales order

I have one scenario for CS.the scenario is realted to automotive industry. Basically its a trading industry of HCV,MCV,LCV apart from that they will do servicing also. First the customer comes for a service.he is having free services. he will have waranty for spare parts of the vehicle. once he comes for servicing first the executive will take complains from the customer after that a Job card will be issued to the customer. there his chasis no ,engine no and registration no will be there. once enter the chasis no entire customer details has to come. how many free services he is having for how many kilo meters.then job card will go to the spare parts dept.that dept will issue the spare parts.then they will invoice the customer. he will pay the payment.and finally the gate pass will be given to the customer to deliver the vehicle.
painful area is how to create a job card and how to add waranty in sales order.
Regards,
Venkat

Hi,
Have u resolved it then Please let me know !!! It is a very interesting problem and owuld like to know the solution...
Regards
Krishna

How to add apache to an exisitng BOXI31 presently running on IIS

Hi Tim,
I know its rude that I directly mailed you but i am not able to post on the SAP forum due to some reasons I don't know. So please if you can help me I would be highly indebted.
I have a multiple server installation.
Number of Servers : 4
Number of CMS : 2
Application tier on 2 servers.
Web tier on 2 servers.
The problem is when i login my .NET infoview works fine but my Java infoview doesn't.
I found the error that the CCM doesn't have Tomcat Apache Server.
So my guess is thats the reason why the java infoview is not working.
Please help how to add the Apache to the CCM.
Regards
Sid

Hi,
You need to run custom installation to install Java Web components on your server box and choose to install
tomcat app server
- Subhodeep

How to add description of a column of a table in SQL Azure

Hi
I have some tables in my application database where there are descriptions added against certain columns. Needless to say they were done by using sp_addextendedproperty.
Now I am trying to migrate the Database to SQL Azure. SQL Azure does not support sp_addextendedproperty.
Hence I am not able to figure out how to add descriptions to those columns.
Any help would be much appreciated.
Thanks
Soumyadeb

Hello,
Just as Latheesh post above, Windows Azure SQL database are not support extended stored procedures. That’s one of the limitations on SQL database, and I don’t know there is another way to achieve the same on Azure.
Regards,
Fanny Liu
Fanny Liu
TechNet Community Support

How to add more fields at level task for importing to MsProject

Hi everyone,
We would like to have the same number of fields either for importing as exporting; or at least, the fields that we need.
The problem is when we are configurating the fields for exporting from cProjects to MsProject, we found 81 available fields and then we don't find the same amount for importing (34). So, in some cases we don't find fields which were configurated for exporting and it is no posible to upload the information back because the field is no available for importing.
Does anyone knows how to add more fields for importing at the cProjects side?
Thanks a lot,
CAMILO URIBE

Some fields can not be migrated because of MsProject designe. The above is the reason why cProjects' customizing does not offer the
mapping of the same nuember of fields.

How to ADD field in iview ?

hi,
in portal-iview i want to add a field.
when i go to 'portal-content -> open the iview with right click -> preview' and then
do ctrl-alt-right-mouse click i got to the customizing of the fields.
i know how to HIDE fields there, but i don't know how to add fields ? in the list
of the fields the necessary fields are available, BUT i only have to options:
hide -> YES or NOT PERSONALIZED
any ideas ?
reg, Martin

Gopal,
the root element of this fields does NOT have the option 'decorate'.
it is the quoata overview of ESS : sap.com/ess~quotas
the top of the tree has option 'decorate', but this is above the necessary table where
i select the data.
my adrl is
martin.svik(at)denzel.at
maybe we can 'change' some screenshots where you can send me yours and i can
send you mine to explain it in a better way
reg, Martin

How to add more drop zones or movies in an idvd menu

I was building a dvd in idvd and ran out of drop zones to fill but I couldn't figure out how to add more drop zones.
I tried different templates but I could find none that had more than 12 drop zones.
Then I was adding movies to the main menu and idvd refused to allow more movies added when I reached 10 movies. It said that the template did not accept more movies.
I tried a few other templates and could not get it to accept more.
I don't want to add submenus because the movies being used do not lend themselves to being put into different submenus.
Is there some way to add more than the default drop zones in an idvd template and to add more movies in a menu without having to use submenus?
Thanks for any advice.

I couldn't figure out how to add more drop zones
Sorry, the templates 'are what they are'.
I don't want to add submenus because the movies being used do not lend themselves to being put into different submenus.
You need to figure out how to work with what is available.
If you want more freedom, buy Apple's Final Cut Studio and learn to use DVD Studio Pro.

How to add Markers?

Similar Messages

Maybe you are looking for