How to add/modify host entry in iPad

How to add/modify host entry in the iPad Mini.
Is there anyway to achieve this in the iPad Mini, like any equivalent DNS configuration.

Point your DNS configuration to a local one in which you can add all tue IP aliases that you dream of.

Similar Messages

How to add a host entry in ipad

I need to add a /etc/hosts entry on an ipad like we do in unix. Is it possible?

Point your DNS configuration to a local one in which you can add all tue IP aliases that you dream of.

How to add my video library to iPad g3 from MacBook Pro?

How to add my video library to iPad g3 from MacBook Pro?

What sort of videos are they, and what app do you want to sync them to ? If they were taken with your camera and they are in a format supported by the iPad, then you could sync them to the Photos app - with the iPad connected and selected on the left-hand side of your computer's iTunes, you can use the Photos tab on the right-hand side of iTunes to sync photos and videos (there is an 'include videos' tickbox on that tab) to the Photos app.
Or you can sync them to the Videos app. If you can add them to your iTunes library (File > Add To Library) you can then use Movies tab (instead of the Photos tab) to sync them to the Videos app. If you can add them to your library but they don't sync over because they aren't in a supported format then try doing Advanced > Create iPad Version and then try syncing those versions.

How to add new group entry in Cisco Vpn using powershell

I am working on a powershell script to connect cisco vpn using powershell, I am able to connect to vpn but not sure how to add new group to vpn. I am using the following script$vpn_profile = 'Test'
$username = 'TestUser'
$userPassword = ConvertTo-SecureString -String "Password" -AsPlainText -Force
$credentials = new-object -typename System.Management.Automation.PSCredential -argumentlist
$username,$userPassword
$password = $credentials.GetNetworkCredential().Password
Set-Location 'c:\Program Files (x86)\Cisco Systems\VPN Client'
.\vpnclient.exe connect $vpn_profile user $username pwd $password
Write-Host "You Are Connected"
cd "C:\"

Have you entered .\vpnclient.exe /? to see if it will return information about other switches you can use with this executable? Other than connect, I was able to track down a few without actually having the executable (http://www.scribd.com/doc/40108893/Cisco-VPN-Client-Command-Line).
That said, I do not believe that there is a switch that will help you create a connection. These are either done manually through the GUI, or can be likely be added by supplying a properly formatted file in the proper place.
If you're using the version of the Cisco VPN client I think you are, then your connection settings, or profiles, are stored in individual .pcf files somewhere on your computer (likely in the Cisco directory). These are simple, text-based files. Find one
on your computer, save it with another name, and then modify it manually. If you really want to use PowerShell, then use this opportunity to learn how to create and edit basic text files using PowerShell. If you have a standard connection file, then you can
put that file onto remote computers any number of ways. If a .pcf file exists in the proper place when the VPN client is opened, then it likely will not prompt for a new connection.
Update: Added more info; clarified

How to add new host to 11g grid control

I have install silently oem agent 11g in a solaris system. The installation was successful and agent is up and running.
But the thing is I can't add this client and its database in my OEM Grid Control interface. When I try to add the target it shows the bellow error
Information
You cannot add a host target from Enterprise Manager Grid Control.
To add a host target, install the Oracle Management Agent on the host computer you want to manage. When the Management Agent begins communicating with the Oracle Management Service, the Management Agent target and the Host target will appear in the list of targets.
My Question is how i can the target's agent can communicate with OMS agent? and How this target can be incorporated?

Hi,
the host and agent targets should show up right after installation of the agent, if securing was successful. I assume the error happened somewhere there.
Can you please paste the output of following command:
$ORACLE_HOME/bin/emctl status agent
where ORACLE_HOME is set to your newly installed agent?
Also, please check if you see any errors in $ORACLE_HOME/sysman/log/emagent.log and emagent.trc about communication between the agent and your OMS.
Best regards,
Robert

How to add/modify and edit OSX Account in my code

Our company need to build a OA system, need to combine our Web OA and OSX Server' features, now need to CRUD(add/modify/delete/view) OSX Contact's account user data and group data, how to implement it in PHP Code or cocoa-touch code?

Weird... When I set up an new account there are no "advanced" options. It requests name, email address, and password then it polls for the account and finds it and done. When I go into mail>prefs>accounts my only options under "advanced" is this http://twitpic.com/5fb41x

How to add Purchase Order entry using B1WS?

Hi,
I have implemented B1WS in DI server, I am trying to add purchase order entry, but after adding it via B1WS, I am not able to find entry in SAP;
My code using B1WS:
public void SAPPurchaseOrder(string _SID)
            _PIService = new PurchaseInvoicesService();
            Document doc = new Document();
            doc.Address ="ab";
            doc.AgentCode = "ab";
            doc.BaseAmountSCSpecified = false;
            doc.CardCode = "VEND7";
            doc.CardName = "Baker & Taylor";
            doc.DocDate = DateTime.Now.Date;
            doc.CreationDate = DateTime.Now.Date;
            doc.DocType = DocumentDocType.dDocument_Items;
            doc.DocumentStatus = DocumentDocumentStatus.bost_Open;
            doc.BaseAmount = 100000;
            doc.DocCurrency = "USD";
            MsgHeader msgHeader = new MsgHeader();
            msgHeader.SessionID = _SID;
            msgHeader.ServiceName = MsgHeaderServiceName.PurchaseInvoicesService;
            msgHeader.ServiceNameSpecified = true;
            _PIService.MsgHeaderValue = msgHeader;
            _PIService.Add(doc);
Also, I found error while I have use "ADD FUNCTION" as;
can not empty list of tables, doc1, doc3 and doc10
Please suggest me a proper entry flow or code to implement.
Thank you.
Piyush
(Rob IT team - Parabox Media Group)

Hello,
Just like DI API, you need add doc lines to purcahse order, here is a sample to add a purchase order.
Public Function Add() As DocumentParams
            Dim myPOParams As DocumentParams = Nothing
            Try
                ' Create Input parameters
                Dim poDoc As Document = New Document
                poDoc.DocDueDate = Date.Now
                poDoc.CardCode = "V10000"
                Dim docLine1 As DocumentDocumentLine = New DocumentDocumentLine
                docLine1.ItemCode = "A00001"
                docLine1.Quantity = 1
                docLine1.TaxCode = "NY"
                poDoc.DocumentLines = Array.CreateInstance(docLine1.GetType(), 2)
                poDoc.DocumentLines.SetValue(docLine1, 0)
                Dim docLine2 As DocumentDocumentLine = New DocumentDocumentLine
                docLine2.ItemCode = "A00002"
                docLine2.Quantity = 1
                docLine2.TaxCode = "NY"
                poDoc.DocumentLines.SetValue(docLine2, 1)
                ' Create Service
                myPOService = New PurchaseOrdersService
                ' Create Header
                Dim msgHeader As MsgHeader = New MsgHeader()
                msgHeader.SessionID = GlbData.sessionID
                msgHeader.ServiceName = MsgHeaderServiceName.PurchaseOrdersService
                msgHeader.ServiceNameSpecified = True
                myPOService.MsgHeaderValue = msgHeader
                ' Call command with output return
                myPOParams = myPOService.Add(poDoc)
                MsgBox("Purhcase Order added: " + myPOParams.DocEntry.ToString(), MsgBoxStyle.DefaultButton2)
            Catch ex As System.Exception
                MsgBox(ex.Message, MsgBoxStyle.DefaultButton2)
            End Try
            Return myPOParams
        End Function
Kind Regards
-Yatsea

How to add a value/entry in a exisiting search help

Hello,
I want to insert bank name and account number in a search help of a SAP field, how can i make an entry in the exisiting search help ?
Thanks
Shehryar

That is a search help exit, u cannot use that if it is a standard search help (unless ofcourse u have the access key)
Search help exits are coded to define own path to retrieve the values.. suppose u need to have some logical retrieval ..say data is in some other system..or simply if u want to restrict the output programatically in a search help, then we use search help exits.
bad luck ..in your case u cannot

How to add a DNS entry

Hi all,
I would like to know if there exists any API method to add a DNS entry from an authorized client on a DNS server in the network. The DNs server supports dynamic updation.
thanks in advance
Sudheesh

Do you get any solution ?

How to add google play to my ipad

how to add google play to my ipad

Amazon sent me an email saying I could do it but I can't figure it out
. They said I need to go to settings and and open security or applications and hit allow unknown sources. I know where settings is but there is no security or applications.....not to mention unknown sources

How to add addresses to groups in iPad? How to send to group?

Address book has not synced properly from my computer to Mobile Me for ages, well before I added my iPad to my stable of products. I've gone through all the advice here and traveled unsuccessful loops to push it or force it to sync again. I deleted every address manually from MobileMe and had it re-populate. It replicated what I just deleted and did not pull the new information from my MacPro. I truly do not understand where MobileMe keeps that old list in its memory and why it insists on reloading outdated information..I would guess there is at least a 40% inaccuaracy with the MobileMe and iPad addresses. It's popping up again addresses that have long been deleted from my MacPro and the has a complete absence of new addresses from my "Master" address book on my MacPro. I have reselected my MacPro as the master in System Preferences and asked it to sync again many times.
I have synced my iPad directly from my MacPro. Still the same old version which matches the MobileMe address book keeps showing up on my iPad. Here's a small twist: I recently added a new group in my MacPro Master Address Book. Both MobileMe and the iPad picked up the name of group but it contains NO contacts or addresses. At first the new group name was appearing in my iPad address book on both the lists labeled 'From my Mac' and 'MobileMe' but now the group name is missing from the 'From my Mac' list. Very odd, since that is the only place that the group actually exists!
MobileMe is currently unresponsive on loading contacts or my calendar so I can't get on the website to verify that version. The rest of MobileMe appears to be working but the iCal error message I sent to Apple bounced.
I cannot upgrade to Lion :-( so trying iCloud is not an option.
I see no way within the iPad to move contacts from the All Contacts list into a new group. If I could do move them within the iPad address book that would take care of the majority of the addresses I want in the new group list. The only thing I can see to do in the iPad is to retype the entire contact information or engage in a time consuming cut and paste transfer of each contact. Both of those options are too daunting to be acceptable. There are about fifty contacts I want in the group.
There does not appear to be a way to send a vCard to the iPad to add that to its Address Book and even if that worked I don't see how to tag anything to move it into any group on the iPad. How do people without a computer get any use out of the iPad's AB? Its limitations are so frustrating to me. I detest sending emails to multiple people from my iPad and save those for when I can get on my computer.
I just tried to set up a 'send to group' email from one of my existing groups in my iPad address book and I don't see anyway to do that from the address book. I went into Mail on the iPad and I don't see how to address an email to more than one person at a time except by typing the first few letters of each name and selecting each person I want to add from the drop down list that appears. Please tell me there's a better way to send to a group of people. If not, I need a recommendation for an address app with better functionality.
I have some urgency for accomplishing this as I will be spending the day in the hospital and want to report results to friends and loved ones as quickly as possible.

Hi
You asked about a recommendation for an app to paste a group of addresses into the To, Cc or Bcc fields of an email?
Our "MailShot Pro" app is the only one we know of on the App Store that creates special "group contacts" in your address book which contain all your groups email addresses, but can be used just like regular contacts from most of your favourite apps. We now have nearly 50000 people using it, and growing steadily every day.
Here is a link if you would like to know more “MailShot Pro” (itunes link).
A free version is also available if you'd like to try it out with a small nmber of contacts.
If you need any customer support just contact us at the website, we're always happy to help.
Peter
www.solubleapps.com
Disclosure: I am the developer of this app and may benefit from its sale- (but so might you)

How to add first blank entry in messageChoice

I have a messageChoice that's populated entirely from the associated model (which happens to be a backing view/sql table). The only items that show in the list are populated records from my view/table. This is sufficient for create / edit forms, where I must have a value for the field that this messageChoice binds to. But it is problematic on the UIX Search Form component, because I need a blank entry in my messageChoice, so if the user creates new search criteria, it doesn't automatically take the first value in the list as part of the filter.
How can I add a blank first option in my messageChoice when the messageChoice is bound to a model backed by a view?
Thanks.
Brad

http://www.oracle.com/technology/products/jdev/tips/mills/null_list_entry.html

How to add text to the standard iPad wallpaper

We have thousands of iPads in our business, all controlled by MobileIron. We would like to put a message on all the iPads pertains to password policy.
The way we propose is to take a copy of the standard wallpaper, add the message to that using a Paint like program, then use that as the wallpaper for the lock screen.
However, we can't find a way to add a wallpaper to those which are stored on the iPad.
Does anyone know how we can achieve this - or have any other ideas for how to put a message on the lock screen, which can easily be rolled out to many devices.
Thanks

You can't add to the wallpapers that are stored on the phone but you can use any picture stored on the device as the lock screen wallpaper. Can't think of any to automate the process, though.

How to add new data entry and display old data in the same screen in SM30?

Hi, Experts:
We need to use SM30 to maintain a table entry. When I click the button of "New Entries", the table screen becomes blank. I can only add new data but not be able to see the old data existing in the table.
How can I have the new line available for me to add new data at the same time see the data currently existing in the table?
Thanks,
Jenny

Hi, thanks for the reply!
Just to follow up for what we did to disable the delete function for maintaining table records. We hided the Delete button by adding a "MODULE disable_delete" code in Screen Painter. So now only adding records to the table is allowed.
Thanks,
Jenny

How to add many hosts using jython interface to sps host database

Hi,
we want to create a huge number of virtual hosts into sps repository with jython interface.
for exemple our variables are:
hostname = sps1.internet.com
ip = 192.168.1.1
masterserver = masterserver
hardware = v550
and the script command looks like:
app.execRaw ( 'hdb.h.add' , { 'name' : hostname , 'desc' : hardware , 'tID' : 'NM:com.vodafone.osmgt#vodRAvhostHT' , 'pID' : NM:masterserver , 'attr' : 'cliServer=cliServer;RA_HOSTNAME=hostname;RA_PROVISIONING_IP_ADDR=ip;RA_DESCRIPTION=Dynamic Infrastructure container;RA_OWNER=n1sps;RA_OWNER_DIR=/var/crash/home/n1sps;RA_OWNER_CREATE_SSH_CONN=true;RA_UID=2241;RA_GROUP=n1sps;RA_GID=2241;RA_INSTALLER_USER=root;RA_SUID=y;RA_INSTALLBASE=/opt/SUNWn1sps;RA_CTYPE=ssh;RA_CTYPE_PARAM=cprefix=/opt/SUNWn1sps/N1_Service_Provisioning_System/agent;RA_LEAVEFILES=n;RA_INSTALL_JRE=/opt/SUNWn1sps/N1_Service_Provisioning_System/common/jre;RA_PORT=1131;RA_CIPHER_TYPE=1;RA_INSTALLER_WORKDIR=/tmp;RA_PARENT_HOST=masterserver;RA_PARENT_OWNER=n1sps;RA_PARENT_OWNER_DIR=/opt/SUNWn1sps/home/n1sps;RA_PARENT_TYPE=MS;RA_PACKAGE_PATH=/var/tmp/spsra;RA_PACKAGE_NAME=cr_ra_solaris_sparc_5.2.sh;RA_REMOTE_PACKAGE_TMP_DIR=/tmp;RA_REMOTE_PRIV_CMD=/usr/local/bin/sudo;RA_REMOTE_PRIV_USER=admin;RA_REMOTE_PRIV_USER_HOME=/home/admin;RA_SRC_SSH_DIR=/opt/home/.ssh;RA_DST_SSH_DIR=/home/.ssh;RA_SSH_AUTH_KEY_FILE=authorized_keys' } )
unfortunetly we are getting an error when we try to run the n1 sps hdb.h.add command.
Are we using this command in the right manner ?
Thanks in advance.
Christian

Dear Tarzanek,
I am Alexis Susset a coleague of Christian.
Thank you very much for your reply, we are now able to add hosts directly from a Jython script.
Unfortunetly, we are now encourting a problem with the hdb.h.add command.
It dies if our hostname (name) is already present in the database.
We currently need to import a very high number of node and I would like to know how to simply get two outputs (1. added nodes, 2. non-added nodes ).
Please let me know if you would like me to post the scripts I have.
PS: I tried to use a hbd.h.lo command but it dies as well when I search for a host that doesn't exist.
Many thanks and best regards,
Alexis

How to add/modify host entry in iPad

Similar Messages

Maybe you are looking for